aboutsummaryrefslogtreecommitdiff
path: root/hw/arm/smmu-common.c
AgeCommit message (Collapse)AuthorFilesLines
2020-08-24hw/arm/smmuv3: Support HAD and advertise SMMUv3.1 supportEric Auger1-1/+1
HAD is a mandatory features with SMMUv3.1 if S1P is set, which is our case. Other 3.1 mandatory features come with S2P which we don't have. So let's support HAD and advertise SMMUv3.1 support in AIDR. HAD support allows the CD to disable hierarchical attributes, ie. if the HAD0/1 bit is set, the APTable field of table descriptors walked through TTB0/1 is ignored. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200728150815.11446-11-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-24hw/arm/smmuv3: Get prepared for range invalidationEric Auger1-5/+20
Enhance the smmu_iotlb_inv_iova() helper with range invalidation. This uses the new fields passed in the NH_VA and NH_VAA commands: the size of the range, the level and the granule. As NH_VA and NH_VAA both use those fields, their decoding and handling is factorized in a new smmuv3_s1_range_inval() helper. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200728150815.11446-8-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-24hw/arm/smmu-common: Manage IOTLB block entriesEric Auger1-18/+49
At the moment each entry in the IOTLB corresponds to a page sized mapping (4K, 16K or 64K), even if the page belongs to a mapped block. In case of block mapping this unefficiently consumes IOTLB entries. Change the value of the entry so that it reflects the actual mapping it belongs to (block or page start address and size). Also the level/tg of the entry is encoded in the key. In subsequent patches we will enable range invalidation. This latter is able to provide the level/tg of the entry. Encoding the level/tg directly in the key will allow to invalidate using g_hash_table_remove() when num_pages equals to 1. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200728150815.11446-6-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-24hw/arm/smmu: Introduce SMMUTLBEntry for PTW and IOTLB valueEric Auger1-15/+17
Introduce a specialized SMMUTLBEntry to store the result of the PTW and cache in the IOTLB. This structure extends the generic IOMMUTLBEntry struct with the level of the entry and the granule size. Those latter will be useful when implementing range invalidation. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200728150815.11446-5-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-24hw/arm/smmu: Introduce smmu_get_iotlb_key()Eric Auger1-30/+36
Introduce the smmu_get_iotlb_key() helper and the SMMU_IOTLB_ASID() macro. Also move smmu_get_iotlb_key and smmu_iotlb_key_hash in the IOTLB related code section. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200728150815.11446-4-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-24hw/arm/smmu-common: Add IOTLB helpersEric Auger1-0/+36
Add two helpers: one to lookup for a given IOTLB entry and one to insert a new entry. We also move the tracing there. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200728150815.11446-3-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-24hw/arm/smmu-common: Factorize some code in smmu_ptw_64()Eric Auger1-31/+17
Page and block PTE decoding can share some code. Let's first handle table PTE and factorize some code shared by page and block PTEs. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200728150815.11446-2-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-05hw/arm/smmu-common: Simplify smmu_find_smmu_pcibus() logicPhilippe Mathieu-Daudé1-10/+11
The smmu_find_smmu_pcibus() function was introduced (in commit cac994ef43b) in a code format that could return an incorrect pointer, which was then fixed by the previous commit. We could have avoided this by writing the if() statement differently. Do it now, in case this function is re-used. The code is easier to review (harder to miss bugs). Acked-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-05hw/arm/smmu-common: a fix to smmu_find_smmu_pcibusEric Auger1-0/+1
Make sure a null SMMUPciBus is returned in case we were not able to identify a pci bus matching the @bus_num. This matches the fix done on intel iommu in commit: a2e1cd41ccfe796529abfd1b6aeb1dd4393762a2 Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-Id: <20200226172628.17449-1-eric.auger@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-20hw: Remove unnecessary cast when calling dma_memory_read()Philippe Mathieu-Daudé1-2/+1
Since its introduction in commit d86a77f8abb, dma_memory_read() always accepted void pointer argument. Remove the unnecessary casts. This commit was produced with the included Coccinelle script scripts/coccinelle/exec_rw_const. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> --- v4: Drop parenthesis when removing cast (Eric Blake)
2020-01-24qdev: set properties with device_class_set_props()Marc-André Lureau1-1/+1
The following patch will need to handle properties registration during class_init time. Let's use a device_class_set_props() setter. spatch --macro-file scripts/cocci-macro-file.h --sp-file ./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place --dir . @@ typedef DeviceClass; DeviceClass *d; expression val; @@ - d->props = val + device_class_set_props(d, val) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-21hw/core: Move cpu.c, cpu.h from qom/ to hw/core/Markus Armbruster1-1/+1
Suggested-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190709152053.16670-2-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Rebased onto merge commit 95a9457fd44; missed instances of qom/cpu.h in comments replaced]
2019-08-16Clean up inclusion of sysemu/sysemu.hMarkus Armbruster1-1/+0
In my "build everything" tree, changing sysemu/sysemu.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Almost a third of its inclusions are actually superfluous. Delete them. Downgrade two more to qapi/qapi-types-run-state.h, and move one from char/serial.h to char/serial.c. hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and stubs/semihost.c define variables declared in sysemu/sysemu.h without including it. The compiler is cool with that, but include it anyway. This doesn't reduce actual use much, as it's still included into widely included headers. The next commit will tackle that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-27-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster1-0/+1
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-04-29hw/arm/smmuv3: Remove SMMUNotifierNodeEric Auger1-3/+3
The SMMUNotifierNode struct is not necessary and brings extra complexity so let's remove it. We now directly track the SMMUDevices which have registered IOMMU MR notifiers. This is inspired from the same transformation on intel-iommu done in commit b4a4ba0d68f50f218ee3957b6638dbee32a5eeef ("intel-iommu: remove IntelIOMMUNotifierNode") Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-id: 20190409160219.19026-1-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-09-25hw/arm/smmu-common: Fix the name of the iommu memory regionsEric Auger1-3/+3
At the point smmu_find_add_as() gets called, the bus number might not be computed. Let's change the name of IOMMU memory region and just use the devfn and an incrementing index. The name only is used for debug. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 20180921070138.10114-2-eric.auger@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: changed 'uint' to 'unsigned int'] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-09hw/arm/smmu-common: Fix devfn computation in smmu_iommu_mrEric Auger1-1/+1
smmu_iommu_mr() aims at returning the IOMMUMemoryRegion corresponding to a given sid. The function extracts both the PCIe bus number and the devfn to return this data. Current computation of devfn is wrong as it only returns the PCIe function instead of slot | function. Fixes 32cfd7f39e08 ("hw/arm/smmuv3: Cache/invalidate config data") Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 1530775623-32399-1-git-send-email-eric.auger@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-26hw/arm/smmuv3: Add notifications on invalidationEric Auger1-0/+34
On TLB invalidation commands, let's call registered IOMMU notifiers. Those can only be UNMAP notifiers. SMMUv3 does not support notification on MAP (VFIO). This patch allows vhost use case where IOTLB API is notified on each guest IOTLB invalidation. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1529653501-15358-5-git-send-email-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-26hw/arm/smmuv3: IOTLB emulationEric Auger1-0/+60
We emulate a TLB cache of size SMMU_IOTLB_MAX_SIZE=256. It is implemented as a hash table whose key is a combination of the 16b asid and 48b IOVA (Jenkins hash). Entries are invalidated on TLB invalidation commands, either globally, or per asid, or per asid/iova. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 1529653501-15358-4-git-send-email-eric.auger@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-26hw/arm/smmuv3: Cache/invalidate config dataEric Auger1-2/+22
Let's cache config data to avoid fetching and parsing STE/CD structures on each translation. We invalidate them on data structure invalidation commands. We put in place a per-smmu mutex to protect the config cache. This will be useful too to protect the IOTLB cache. The caches can be accessed without BQL, ie. in IO dataplane. The same kind of mutex was put in place in the intel viommu. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1529653501-15358-3-git-send-email-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-05-18hw/arm/smmu-common: Fix coverity issue in get_block_pte_addressEric Auger1-2/+2
Coverity points out that this can overflow if n > 31, because it's only doing 32-bit arithmetic. Let's use 1ULL instead of 1. Also the formulae used to compute n can be replaced by the level_shift() macro. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1526493784-25328-3-git-send-email-eric.auger@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-05-04hw/arm/smmu-common: VMSAv8-64 page table walkEric Auger1-0/+222
This patch implements the page table walk for VMSAv8-64. Signed-off-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Prem Mallappa <prem.mallappa@broadcom.com> Message-id: 1524665762-31355-4-git-send-email-eric.auger@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-05-04hw/arm/smmu-common: IOMMU memory region and address space setupEric Auger1-0/+69
We set up the infrastructure to enumerate all the PCI devices attached to the SMMU and create an associated IOMMU memory region and address space. Those info are stored in SMMUDevice objects. The devices are grouped according to the PCIBus they belong to. A hash table indexed by the PCIBus pointer is used. Also an array indexed by the bus number allows to find the list of SMMUDevices. Signed-off-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Prem Mallappa <prem.mallappa@broadcom.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1524665762-31355-3-git-send-email-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-05-04hw/arm/smmu-common: smmu base device and datatypesEric Auger1-0/+81
The patch introduces the smmu base device and class for the ARM smmu. Devices for specific versions will be derived from this base device. We also introduce some important datatypes. Signed-off-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Prem Mallappa <prem.mallappa@broadcom.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1524665762-31355-2-git-send-email-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.1 at 2025-01-23 13:51:09 +0000