aboutsummaryrefslogtreecommitdiff
path: root/hw/arm/highbank.c
AgeCommit message (Collapse)AuthorFilesLines
2015-05-12hw/arm/highbank.c: Wire FIQ between CPU <> GICPeter Maydell1-0/+3
Connect FIQ output of the GIC CPU interfaces to the CPUs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1430502643-25909-18-git-send-email-peter.maydell@linaro.org
2015-04-26Switch non-CPU callers from ld/st*_phys to address_space_ld/st*Peter Maydell1-3/+9
Switch all the uses of ld/st*_phys to address_space_ld/st*, except for those cases where the address space is the CPU's (ie cs->as). This was done with the following script which generates a Coccinelle patch. A few over-80-columns lines in the result were rewrapped by hand where Coccinelle failed to do the wrapping automatically, as well as one location where it didn't put a line-continuation '\' when wrapping lines on a change made to a match inside a macro definition. ===begin=== #!/bin/sh -e # Usage: # ./ldst-phys.spatch.sh > ldst-phys.spatch # spatch -sp_file ldst-phys.spatch -dir . | sed -e '/^+/s/\t/ /g' > out.patch # patch -p1 < out.patch for FN in ub uw_le uw_be l_le l_be q_le q_be uw l q; do cat <<EOF @ cpu_matches_ld_${FN} @ expression E1,E2; identifier as; @@ ld${FN}_phys(E1->as,E2) @ other_matches_ld_${FN} depends on !cpu_matches_ld_${FN} @ expression E1,E2; @@ -ld${FN}_phys(E1,E2) +address_space_ld${FN}(E1,E2, MEMTXATTRS_UNSPECIFIED, NULL) EOF done for FN in b w_le w_be l_le l_be q_le q_be w l q; do cat <<EOF @ cpu_matches_st_${FN} @ expression E1,E2,E3; identifier as; @@ st${FN}_phys(E1->as,E2,E3) @ other_matches_st_${FN} depends on !cpu_matches_st_${FN} @ expression E1,E2,E3; @@ -st${FN}_phys(E1,E2,E3) +address_space_st${FN}(E1,E2,E3, MEMTXATTRS_UNSPECIFIED, NULL) EOF done ===endit=== Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2015-04-08arm: memory: Replace memory_region_init_ram with ↵Dirk Müller1-1/+1
memory_region_allocate_system_memory Commit 0b183fc871:"memory: move mem_path handling to memory_region_allocate_system_memory" split memory_region_init_ram and memory_region_init_ram_from_file. Also it moved mem-path handling a step up from memory_region_init_ram to memory_region_allocate_system_memory. Therefore for any board that uses memory_region_init_ram directly, -mem-path is not supported. Fix this by replacing memory_region_init_ram with memory_region_allocate_system_memory. Signed-off-by: Dirk Mueller <dmueller@suse.com> Message-id: CAL5wTH4UHYKpJF=dLJfFzxpufjY189chnCow47-ySuLf8GLbug@mail.gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-04-01hw/arm/highbank: Fix resource leak and wrong image loadingStefan Weil1-2/+1
Coverity reports a resource leak for sysboot_filename which is allocated by qemu_find_file. In addition, that name is used to get the size of the image, but a different image name was used to load it. In addition, instead of passing the maximum allowed image size the actual image size was passed to load_image_targphys. Fix all three issues. Signed-off-by: Stefan Weil <sw@weilnetz.de> Message-id: 1426326781-2488-1-git-send-email-sw@weilnetz.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-19arm: fix memory leakGonglei1-0/+1
Cc: Michael Tokarev <mjt@tls.msk.ru> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-02-18error: Use error_report_err() where appropriateMarkus Armbruster1-2/+2
Coccinelle semantic patch: @@ expression E; @@ - error_report("%s", error_get_pretty(E)); - error_free(E); + error_report_err(E); @@ expression E, S; @@ - error_report("%s", error_get_pretty(E)); + error_report_err(E); ( exit(S); | abort(); ) Trivial manual touch-ups in block/sheepdog.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-12-22target-arm: Disable EL3 on unsupported machinesGreg Bellows1-0/+12
Disables the CPU ARM_FEATURE_EL3 featuere on machine models that can be configured to use Cortex-A9, Cortex-A15, and ARM1176 but don't officially support EL3. This preserves backwards compatibility. Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1418684992-8996-15-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-10-20hw: Convert from BlockDriverState to BlockBackend, mostlyMarkus Armbruster1-1/+1
Device models should access their block backends only through the block-backend.h API. Convert them, and drop direct includes of inappropriate headers. Just four uses of BlockDriverState are left: * The Xen paravirtual block device backend (xen_disk.c) opens images itself when set up via xenbus, bypassing blockdev.c. I figure it should go through qmp_blockdev_add() instead. * Device model "usb-storage" prompts for keys. No other device model does, and this one probably shouldn't do it, either. * ide_issue_trim_cb() uses bdrv_aio_discard() instead of blk_aio_discard() because it fishes its backend out of a BlockAIOCB, which has only the BlockDriverState. * PC87312State has an unused BlockDriverState[] member. The next two commits take care of the latter two. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-09-09memory: add parameter errp to memory_region_init_ramHu Tao1-2/+3
Add parameter errp to memory_region_init_ram and update all call sites to pass in &error_abort. Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-28machine: Conversion of QEMUMachineInitArgs to MachineStateMarcel Apfelbaum1-12/+12
Total removal of QEMUMachineInitArgs struct. QEMUMachineInitArgs's fields are copied into MachineState. Removed duplicated fields from MachineState. All the other changes are only mechanical refactoring, no semantic changes. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> (s390) Reviewed-by: Michael S. Tsirkin <mst@redhat.com> (PC) [AF: Renamed ms -> machine, use MACHINE_GET_CLASS()] Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-05-13savevm: Remove all the unneeded version_minimum_id_old (arm)Juan Quintela1-1/+0
After commit 767adce2d, they are redundant. This way we don't assign them except when needed. Once there, there were lots of cases where the ".fields" indentation was wrong: .fields = (VMStateField []) { and .fields = (VMStateField []) { Change all the combinations to: .fields = (VMStateField[]){ The biggest problem (apart from aesthetics) was that checkpatch complained when we copy&pasted the code from one place to another. Signed-off-by: Juan Quintela <quintela@redhat.com> [PMM: fixed minor conflict, corrected commit message typos] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-04-04hw/arm/vexpress, hw/arm/highbank: Don't insist that CPU has reset-cbar propertyPeter Maydell1-7/+7
For the machine models which can have a Cortex-A15 CPU (vexpress-a15 and midway), silently continue if the CPU object has no reset-cbar property rather than failing. This allows these boards to be used under KVM with the "-cpu host" option, since the 'host' CPU object has no reset-cbar property. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Rob Herring <rob.herring@linaro.org>
2014-04-04hw/arm/highbank: Don't segfault on unknown CPU namesPeter Maydell1-0/+5
If the user passes an unknown CPU name via the '-cpu' option, exit with an error message rather than segfaulting. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Rob Herring <rob.herring@linaro.org>
2014-02-11exec: Make stl_phys_notdirty input an AddressSpaceEdgar E. Iglesias1-3/+3
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2013-12-23hw/arm/highbank: Simplify code (memory region in device state)Stefan Weil1-4/+3
The memory region can be included by value instead of by reference in the device state. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-12-17arm/highbank.c: Fix MPCore periphbase namePeter Crosthwaite1-7/+8
GIC_BASE_ADDR is not the base address of the GIC. Its clear from the code that this is the base address of the MPCore. Rename to MPCORE_PERIPHBASE accordingly. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 90798bd3507205c16238b8b19a1a58c5437cf7ca.1387160489.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17arm/highbank: Fix CBAR initialisationPeter Crosthwaite1-3/+5
Fix the CBAR initialisation by using the newly defined static property. CBAR is now set before realization, so the intended value is now actually used. So I have kind of tested this. I booted an ARM kernel on Highbank with the stock Highbank DTB. It doesn't boot (and I will be doing something wrong), but before this patch I got this: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at /workspaces/pcrost/public/linux2.git/arch/arm/mm/ioremap.c:301 __arm_ioremap_pfn_caller+0x180/0x198() CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.13.0-rc1-next-20131126-dirty #2 [<c0015164>] (unwind_backtrace) from [<c00118c0>] (show_stack+0x10/0x14) [<c00118c0>] (show_stack) from [<c02bd5fc>] (dump_stack+0x78/0x90) [<c02bd5fc>] (dump_stack) from [<c001f110>] (warn_slowpath_common+0x68/0x84) [<c001f110>] (warn_slowpath_common) from [<c001f1f4>] (warn_slowpath_null+0x1c/0x24) [<c001f1f4>] (warn_slowpath_null) from [<c0017c6c>] (__arm_ioremap_pfn_caller+0x180/0x198) [<c0017c6c>] (__arm_ioremap_pfn_caller) from [<c0017cd8>] (__arm_ioremap_caller+0x54/0x5c) [<c0017cd8>] (__arm_ioremap_caller) from [<c0017d10>] (__arm_ioremap+0x18/0x1c) [<c0017d10>] (__arm_ioremap) from [<c03913c0>] (highbank_init_irq+0x34/0x8c) [<c03913c0>] (highbank_init_irq) from [<c038c228>] (init_IRQ+0x28/0x2c) [<c038c228>] (init_IRQ) from [<c03899ec>] (start_kernel+0x234/0x398) [<c03899ec>] (start_kernel) from [<00008074>] (0x8074) ---[ end trace 3406ff24bd97382f ]--- Which disappears with this patch. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: fedec366aaa512d75093635f523d1dbcb3358361.1387160489.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17arm/highbank: Use object_new() rather than cpu_arm_init()Peter Crosthwaite1-3/+9
To allow the machine model to set device properties before CPU realization. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 8c671e500390c8be0cc363e887e32867d1d1b0d2.1387160489.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-08-28hw: Clean up bogus default boot orderMarkus Armbruster1-2/+0
We set default boot order "cad" in every single machine definition except "pseries" and "moxiesim", even though very few boards actually care for boot order, and "cad" makes sense for even fewer. Machines that care: * pc and its variants Accept up to three letters 'a', 'b' (undocumented alias for 'a'), 'c', 'd' and 'n'. Reject all others (fatal with -boot). * nseries (n800, n810) Check whether order starts with 'n'. Silently ignored otherwise. * prep, g3beige, mac99 Extract the first character the machine understands (subset of 'a'..'f'). Silently ignored otherwise. * spapr Accept an arbitrary string (vl.c restricts it to contain only 'a'..'p', no duplicates). * sun4[mdc] Use the first character. Silently ignored otherwise. Strip characters these machines ignore from their default boot order. For all other machines, remove the unused default boot order alltogether. Note that my rename of QEMUMachine member boot_order to default_boot_order and QEMUMachineInitArgs member boot_device to boot_order has a welcome side effect: it makes every use of boot orders visible in this patch, for easy review. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-08-20hw/arm/highbank: Don't use arm_pic_init_cpu()Peter Maydell1-3/+1
Drop the now-deprecated arm_pic_init_cpu() in favour of directly getting the IRQ line from the ARMCPU object. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1375977856-25046-5-git-send-email-peter.maydell@linaro.org
2013-07-29highbank: QOM cast cleanup for HighbankRegsStateAndreas Färber1-5/+11
Add type constant and use QOM casts. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-15ARM/highbank: add support for Calxeda ECX-2000 / MidwayAndre Przywara1-5/+27
The Calxeda ECX-2000 chip (aka. Midway) is model-wise quite similar to the Highbank. The most prominent difference is the Cortex-A15 CPU core in it, together with the associated core peripherals. Add a new ARM machine type called "midway". Move the L2 cache controller device into the Highbank specific part, since Midway does not have (and need) it. Signed-off-by: Andre Przywara <andre.przywara@calxeda.com> Message-id: 1373026897-12085-3-git-send-email-andre.przywara@calxeda.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-07-15ARM/highbank: prepare for adding similar machinesAndre Przywara1-6/+23
To allow the modelling of machines similar to Calxeda Highbank, introduce a parameter to the init function and call it from a wrapper. This allows to tweak the definition for individual machines later on. Signed-off-by: Andre Przywara <andre.przywara@calxeda.com> Message-id: 1373026897-12085-2-git-send-email-andre.przywara@calxeda.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-07-09cpu: Make first_cpu and next_cpu CPUStateAndreas Färber1-1/+1
Move next_cpu from CPU_COMMON to CPUState. Move first_cpu variable to qom/cpu.h. gdbstub needs to use CPUState::env_ptr for now. cpu_copy() no longer needs to save and restore cpu_next. Acked-by: Paolo Bonzini <pbonzini@redhat.com> [AF: Rebased, simplified cpu_copy()] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-04hw/a*: pass owner to memory_region_init* functionsPaolo Bonzini1-2/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04memory: add owner argument to initialization functionsPaolo Bonzini1-3/+3
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-05-18remove some double-includesMichael Tokarev1-1/+0
Some source files #include the same header more than once for no good reason. Remove second #includes in such cases. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-04-15arm: fix location of some include filesPeter Maydell1-2/+2
The recent rearrangement of include files had some minor errors: devices.h is not ARM specific and should not be in arm/ arm.h should be in arm/ Move these two headers to correct this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move headers to include/Paolo Bonzini1-2/+2
Many of these should be cleaned up with proper qdev-/QOM-ification. Right now there are many catch-all headers in include/hw/ARCH depending on cpu.h, and this makes it necessary to compile these files per-target. However, fixing this does not belong in these patches. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01hw: move boards and other isolated files to hw/ARCHPaolo Bonzini1-0/+342
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2024-09-30 13:24:28 +0000