aboutsummaryrefslogtreecommitdiff
path: root/hw/arm/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2024-03-05hw/arm: Connect BSC to BCM2835 board as I2C0, I2C1 and I2C2Rayhan Faizel1-0/+1
BCM2835 has three I2C controllers. All of them share the same interrupt line. Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240224191038.2409945-3-rayhan.faizel@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27hw/usb: extract sysbus-ohci to a separate filePaolo Bonzini1-5/+7
Split the sysbus version to a separate file so that it is not included in PCI-only machines, and adjust Kconfig for machines that do need sysbus-ohci. The copyrights are based on the time and employer of balrog and Paul Brook's contributions. While adjusting the SM501 dependency, move it to the right place instead of keeping it in the R4D machine. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20240223124406.234509-10-pbonzini@redhat.com> [PMD: Rename some functions using 'ohci_sysbus_' prefix] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-02-22hw/ide: Split qdev.c into ide-bus.c and ide-dev.cThomas Huth1-0/+2
qdev.c is a mixture between IDE bus specific functions and IDE device functions. Let's split it up to make it more obvious which part is related to bus handling and which part is related to device handling. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-ID: <20240220085505.30255-3-thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-02-15hw/arm/mps3r: Initial skeleton for mps3-an536 boardPeter Maydell1-0/+5
The AN536 is another FPGA image for the MPS3 development board. Unlike the existing FPGA images we already model, this board uses a Cortex-R family CPU, and it does not use any equivalent to the M-profile "Subsystem for Embedded" SoC-equivalent that we model in hw/arm/armsse.c. It's therefore more convenient for us to model it as a completely separate C file. This commit adds the basic skeleton of the board model, and the code to create all the RAM and ROM. We assume that we're probably going to want to add more images in future, so use the same base class/subclass setup that mps2-tz.c uses, even though at the moment there's only a single subclass. Following commits will add the CPUs and the peripherals. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-9-peter.maydell@linaro.org
2024-02-02hw/arm: Connect SPI Controller to BCM2835Rayhan Faizel1-0/+1
This patch will allow the SPI controller to be accessible from BCM2835 based boards as SPI0. SPI driver is usually disabled by default and config.txt does not work. Instead, dtmerge can be used to apply spi=on on a bcm2835 dtb file. Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com> Message-id: 20240129221807.2983148-3-rayhan.faizel@gmail.com [PMM: indent tweak] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-01hw/fsi: Aspeed APB2OPB & On-chip peripheral busNinad Palsule1-0/+1
This is a part of patchset where IBM's Flexible Service Interface is introduced. An APB-to-OPB bridge enabling access to the OPB from the ARM core in the AST2600. Hardware limitations prevent the OPB from being directly mapped into APB, so all accesses are indirect through the bridge. The On-Chip Peripheral Bus (OPB): A low-speed bus typically found in POWER processors. This now makes an appearance in the ASPEED SoC due to tight integration of the FSI master IP with the OPB, mainly the existence of an MMIO-mapping of the CFAM address straight onto a sub-region of the OPB address space. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Ninad Palsule <ninad@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> [ clg: - moved FSIMasterState under AspeedAPB2OPBState - modified fsi_opb_fsi_master_address() and fsi_opb_opb2fsi_address() - instroduced fsi_aspeed_apb2opb_init() - reworked fsi_aspeed_apb2opb_realize() - removed FSIMasterState object and fsi_opb_realize() - simplified OPBus - introduced fsi_aspeed_apb2opb_rw to fix endianness issue ] Signed-off-by: Cédric Le Goater <clg@kaod.org>
2024-01-26hw/arm: add PCIe to Freescale i.MX6Nikita Ostrenkov1-0/+2
Signed-off-by: Nikita Ostrenkov <n.ostrenkov@gmail.com> Message-id: 20240108140325.1291-1-n.ostrenkov@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-01-26hw/arm: Add watchdog timer to Allwinner H40 and Bananapi boardGuenter Roeck1-0/+1
Add watchdog timer support to Allwinner-H40 and Bananapi. The watchdog timer is added as an overlay to the Timer module memory map. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Message-id: 20240115182757.1095012-4-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-01-26hw/arm: Add AHCI/SATA controller to Allwinner R40 and Bananapi boardGuenter Roeck1-0/+1
Allwinner R40 supports an AHCI compliant SATA controller. Add support for it. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20240115182757.1095012-3-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-01-26hw/arm: Add EHCI/OHCI controllers to Allwinner R40 and Bananapi boardGuenter Roeck1-0/+2
Allwinner R40 supports two USB host ports shared between a USB 2.0 EHCI host controller and a USB 1.1 OHCI host controller. Add support for both of them. If machine USB support is not enabled, create unimplemented devices for the USB memory ranges to avoid crashes when booting Linux. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240115182757.1095012-2-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-01-15hw/arm: Connect STM32L4x5 SYSCFG to STM32L4x5 SoCInès Varhol1-0/+1
The SYSCFG input GPIOs aren't connected yet. When the STM32L4x5 GPIO device will be implemented, its output GPIOs will be connected to the SYSCFG input GPIOs. Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20240109194438.70934-3-ines.varhol@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-01-15hw/arm: Connect STM32L4x5 EXTI to STM32L4x5 SoCInès Varhol1-0/+1
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Message-id: 20240109160658.311932-3-ines.varhol@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-01-09hw/arm: Add minimal support for the B-L475E-IOT01A boardInès Varhol1-0/+6
This commit adds a new B-L475E-IOT01A board using the STM32L475VG SoC as well as a dedicated documentation file. The implementation is derived from the Netduino Plus 2 machine. There are no peripherals implemented yet, only memory regions. Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Message-id: 20240108135849.351719-3-ines.varhol@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-01-09hw/arm: Add minimal support for the STM32L4x5 SoCInès Varhol1-0/+5
This patch adds a new STM32L4x5 SoC, it is necessary to add support for the B-L475E-IOT01A board. The implementation is derived from the STM32F405 SoC. The implementation contains no peripherals, only memory regions are implemented. Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Message-id: 20240108135849.351719-2-ines.varhol@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-01-09hw/arm: add cache controller for Freescale i.MX6Nikita Ostrenkov1-0/+1
Signed-off-by: Nikita Ostrenkov <n.ostrenkov@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20231219105510.4907-1-n.ostrenkov@gmail.com [PMM: fixed stray whitespace] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-12-19hw/arm: Activate IOMMUFD for virt machinesCédric Le Goater1-0/+1
Signed-off-by: Cédric Le Goater <clg@redhat.com> Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Cédric Le Goater <clg@redhat.com>
2023-11-08Merge tag 'misc-cpus-20231107' of https://github.com/philmd/qemu into stagingStefan Hajnoczi1-0/+1
Misc hardware patch queue HW emulation: - PMBus fixes and tests (Titus) - IDE fixes and tests (Fiona) - New ADM1266 sensor (Titus) - Better error propagation in PCI-ISA i82378 (Philippe) - Declare SD model QOM types using DEFINE_TYPES macro (Philippe) Topology: - Fix CPUState::nr_cores calculation (Zhuocheng Ding and Zhao Liu) Monitor: - Synchronize CPU state in 'info lapic' (Dongli Zhang) QOM: - Have 'cpu-qom.h' target-agnostic (Philippe) - Move ArchCPUClass definition to each target's cpu.h (Philippe) - Call object_class_is_abstract once in cpu_class_by_name (Philippe) UI: - Use correct key names in titles on MacOS / SDL2 (Adrian) MIPS: - Fix MSA BZ/BNZ and TX79 LQ/SQ opcodes (Philippe) Nios2: - Create IRQs *after* vCPU is realized (Philippe) PPC: - Restrict KVM objects to system emulation (Philippe) - Move target-specific definitions out of 'cpu-qom.h' (Philippe) S390X: - Make hw/s390x/css.h and hw/s390x/sclp.h headers target agnostic (Philippe) X86: - HVF & KVM cleanups (Philippe) Various targets: - Use env_archcpu() to optimize (Philippe) Misc: - Few global variable shadowing removed (Philippe) - Introduce cpu_exec_reset_hold and factor tcg_cpu_reset_hold out (Philippe) - Remove few more 'softmmu' mentions (Philippe) - Fix and cleanup in vl.c (Akihiko & Marc-André) - Resource leak fix in dump (Zongmin Zhou) - MAINTAINERS updates (Thomas, Daniel) # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmVKKmEACgkQ4+MsLN6t # wN4xHQ//X/enH4C7K3VP/tSinDiwmXN2o61L9rjqSDQkBaCtktZx4c8qKSDL7V4S # vwzmvvBn3biMXQwZNVJo9d0oz2qoaF9tI6Ao0XDHAan9ziagfG9YMqWhkCfj077Q # jLdCqkUuMJBvQgXGB1a6UgCme8PQx7h0oqjbCNfB0ZBls24b5DiEjO87LE4OTbTi # zKRhYEpZpGwIVcy+1dAsbaBpGFP06sr1doB9Wz4c06eSx7t0kFSPk6U4CyOPrGXh # ynyCxPwngxIXmarY8gqPs3SBs7oXsH8Q/ZOHr1LbuXhwSuw/0zBQU9aF7Ir8RPan # DB79JjPrtxTAhICKredWT79v9M18D2/1MpONgg4vtx5K2FzGYoAJULCHyfkHMRSM # L6/H0ZQPHvf7w72k9EcSQIhd0wPlMqRmfy37/8xcLiw1h4l/USx48QeKaeFWeSEu # DgwSk+R61HbrKvQz/U0tF98zUEyBaQXNrKmyzht0YE4peAtpbPNBeRHkd0GMae/Z # HOmkt8QlFQ0T14qSK7mSHaSJTUzRvFGD01cbuCDxVsyCWWsesEikXBACZLG5RCRY # Rn1WeX1H9eE3kKi9iueLnhzcF9yM5XqFE3f6RnDzY8nkg91lsTMSQgFcIpv6uGyp # 3WOTNSC9SoFyI3x8pCWiKOGytPUb8xk+PnOA85wYvVmT+7j6wus= # =OVdQ # -----END PGP SIGNATURE----- # gpg: Signature made Tue 07 Nov 2023 20:15:29 HKT # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * tag 'misc-cpus-20231107' of https://github.com/philmd/qemu: (75 commits) dump: Add close fd on error return to avoid resource leak ui/sdl2: use correct key names in win title on mac MAINTAINERS: Add more guest-agent related files to the corresponding section MAINTAINERS: Add include/hw/xtensa/mx_pic.h to the XTFPGA machine section MAINTAINERS: update libvirt devel mailing list address MAINTAINERS: Add the CAN documentation file to the CAN section MAINTAINERS: Add include/hw/timer/tmu012.h to the SH4 R2D section hw/sd: Declare QOM types using DEFINE_TYPES() macro hw/i2c: pmbus: reset page register for out of range reads hw/i2c: pmbus: immediately clear faults on request tests/qtest: add tests for ADM1266 hw/sensor: add ADM1266 device model hw/i2c: pmbus: add VCAP register hw/i2c: pmbus: add fan support hw/i2c: pmbus: add vout mode bitfields hw/i2c: pmbus add support for block receive tests/qtest: ahci-test: add test exposing reset issue with pending callback hw/ide: reset: cancel async DMA operation before resetting state hw/cpu: Update the comments of nr_cores and nr_dies system/cpus: Fix CPUState.nr_cores' calculation ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-11-07hw/sensor: add ADM1266 device modelTitus Rwantare1-0/+1
The ADM1266 is a cascadable super sequencer with margin control and fault recording. This commit adds basic support for its PMBus commands and models the identification registers that can be modified in a firmware update. Reviewed-by: Hao Wu <wuhaotsh@google.com> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Titus Rwantare <titusr@google.com> [PMD: Cover file in MAINTAINERS] Message-ID: <20231023-staging-pmbus-v3-v4-5-07a8cb7cd20a@google.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-11-07hw/arm: XLNX_VERSAL depends on XLNX_CSU_DMAMarc-André Lureau1-0/+1
Fixes: 868d968004 ("hw/arm/xlnx-versal: Connect OSPI flash controller") Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-11-07arm/kconfig: XLNX_ZYNQMP_ARM depends on PIXMANMarc-André Lureau1-1/+2
The Display Port has some strong PIXMAN dependency. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-11-02hw/arm: xlnx-versal-virt: Add AMD/Xilinx TRNG deviceTong Ho1-0/+1
Connect the support for Versal True Random Number Generator (TRNG) device. Warning: unlike the TRNG component in a real device from the Versal device familiy, the connected TRNG model is not of cryptographic grade and is not intended for use cases when cryptograpically strong TRNG is needed. Signed-off-by: Tong Ho <tong.ho@amd.com> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20231031184611.3029156-3-tong.ho@amd.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-11-02hw/input/stellaris_input: Rename to stellaris_gamepadPeter Maydell1-1/+1
This source file implements a stellaris gamepad device; rename it so that it is a closer match to the device name. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20231030114802.3671871-2-peter.maydell@linaro.org
2023-07-04hw/arm/sbsa-ref: use XHCI to replace EHCIYuquan Wang1-1/+1
The current sbsa-ref cannot use EHCI controller which is only able to do 32-bit DMA, since sbsa-ref doesn't have RAM below 4GB. Hence, this uses XHCI to provide a usb controller with 64-bit DMA capablity instead of EHCI. We bump the platform version to 0.3 with this change. Although the hardware at the USB controller address changes, the firmware and Linux can both cope with this -- on an older non-XHCI-aware firmware/kernel setup the probe routine simply fails and the guest proceeds without any USB. (This isn't a loss of functionality, because the old USB controller never worked in the first place.) So we can call this a backwards-compatible change and only bump the minor version. Signed-off-by: Yuquan Wang <wangyuquan1236@phytium.com.cn> Message-id: 20230621103847.447508-2-wangyuquan1236@phytium.com.cn [PMM: tweaked commit message; add line to docs about what changes in platform version 0.3] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-19hw/arm/Kconfig: sbsa-ref uses Bochs displayMarcin Juszkiewicz1-0/+1
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20230607092112.655098-1-marcin.juszkiewicz@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06hw: arm: allwinner-sramc: Add SRAM Controller support for R40qianfan Zhao1-0/+1
Only a few important registers are added, especially the SRAM_VER register. Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06hw/misc: Rename axp209 to axp22x and add support AXP221 PMUqianfan Zhao1-1/+2
This patch adds minimal support for AXP-221 PMU and connect it to bananapi M2U board. Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06hw: arm: Add bananapi M2-Ultra and allwinner-r40 supportqianfan Zhao1-0/+10
Allwinner R40 (sun8i) SoC features a Quad-Core Cortex-A7 ARM CPU, and a Mali400 MP2 GPU from ARM. It's also known as the Allwinner T3 for In-Car Entertainment usage, A40i and A40pro are variants that differ in applicable temperatures range (industrial and military). Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-05-30arm/Kconfig: Make TCG dependence explicitFabiano Rosas1-41/+82
Replace the 'default y if TCG' pattern with 'default y; depends on TCG'. That makes explict that there is a dependence on TCG and enabling these CONFIGs via .mak files without TCG present will fail earlier. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230523180525.29994-4-farosas@suse.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-05-10hw/arm: Select XLNX_USB_SUBSYS for xlnx-zcu102 machineFabiano Rosas1-0/+1
This machine hardcodes initialization of the USB device, so select the corresponding Kconfig. It is not enough to have it as "default y if XLNX_VERSAL" at usb/Kconfig because building --without-default-devices disables the default selection resulting in: $ ./qemu-system-aarch64 -M xlnx-zcu102 qemu-system-aarch64: missing object type 'usb_dwc3' Aborted (core dumped) Signed-off-by: Fabiano Rosas <farosas@suse.de> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230208192654.8854-8-farosas@suse.de> Message-Id: <20230503091244.1450613-8-alex.bennee@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-02arm/Kconfig: Do not build TCG-only boards on a KVM-only buildFabiano Rosas1-1/+41
Move all the CONFIG_FOO=y from default.mak into "default y if TCG" statements in Kconfig. That way they won't be selected when CONFIG_TCG=n. I'm leaving CONFIG_ARM_VIRT in default.mak because it allows us to keep the two default.mak files not empty and keep aarch64-default.mak including arm-default.mak. That way we don't surprise anyone that's used to altering these files. With this change we can start building with --disable-tcg. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230426180013.14814-12-farosas@suse.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-05-02arm/Kconfig: Always select SEMIHOSTING when TCG is presentFabiano Rosas1-1/+0
We are about to enable the build without TCG, so CONFIG_SEMIHOSTING and CONFIG_ARM_COMPATIBLE_SEMIHOSTING cannot be unconditionally set in default.mak anymore. So reflect the change in a Kconfig. Instead of using semihosting/Kconfig, use a target-specific file, so that the change doesn't affect other architectures which might implement semihosting in a way compatible with KVM. The selection from ARM_v7M needs to be removed to avoid a cycle during parsing. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230426180013.14814-11-farosas@suse.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-04-21Merge tag 'pull-tpm-2023-04-20-1' of ↵Richard Henderson1-0/+1
https://github.com/stefanberger/qemu-tpm into staging Merge tpm 2023/04/20 v1 # -----BEGIN PGP SIGNATURE----- # # iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAmRBLgoACgkQda1lgCoL # QhEPyQf/WfEg8k2hDLExobsSgup1IsnT+mHHTBOZVJvq2efg2YXUTHA56fmD9X6d # crqTq68L5oaMES5iYEZhA7EAgfk3RvxDQGrlXBByPzrc6SSwEHHMR4Zzi5zrbCoW # t6TmaKQrlQqYwkhhsbyqnG46bj0ugCDagkBLfJdVl96fjkYgTspcDxaNwqwy/DPn # GTmQlvdRY09D1nylIdtcLBIfsM+sIkRslyngbUEIy+Bx8EWRy2a8Qw0BdY9g1XoE # e0CaRaFMpju1KOIjq0YSIzt0LSQDFfPc1IlUAC0ZALhNmp+PPNtr4E7+4kFfO2ym # 1sT2w25ho8dYDdm/m8tIauCdGoHw4A== # =ML27 # -----END PGP SIGNATURE----- # gpg: Signature made Thu 20 Apr 2023 01:20:26 PM BST # gpg: using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211 # gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211 * tag 'pull-tpm-2023-04-20-1' of https://github.com/stefanberger/qemu-tpm: qtest: Add a test case for TPM TIS I2C connected to Aspeed I2C controller qtest: Move tpm_util_tis_transmit() into tpm-tis-utils.c and rename it qtest: Add functions for accessing devices on Aspeed I2C controller tests/avocado/aspeed: Add TPM TIS I2C test tpm: Add support for TPM device over I2C bus tpm: Extend common APIs to support TPM TIS I2C docs: Add support for TPM devices over I2C bus Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-04-20tpm: Add support for TPM device over I2C busNinad Palsule1-0/+1
Qemu already supports devices attached to ISA and sysbus. This drop adds support for the I2C bus attached TPM devices. I2C model only supports TPM2 protocol. This commit includes changes for the common code. - Added I2C emulation model. Logic was added in the model to temporarily cache the data as I2C interface works per byte basis. - New tpm type "tpm-tis-i2c" added for I2C support. The user has to provide this string on command line. Testing: TPM I2C device module is tested using SWTPM (software based TPM package). Qemu uses the rainier machine and is connected to swtpm over the socket interface. The command to start swtpm is as follows: $ swtpm socket --tpmstate dir=/tmp/mytpm1 \ --ctrl type=unixio,path=/tmp/mytpm1/swtpm-sock \ --tpm2 --log level=100 The command to start qemu is as follows: $ qemu-system-arm -M rainier-bmc -nographic \ -kernel ${IMAGEPATH}/fitImage-linux.bin \ -dtb ${IMAGEPATH}/aspeed-bmc-ibm-rainier.dtb \ -initrd ${IMAGEPATH}/obmc-phosphor-initramfs.rootfs.cpio.xz \ -drive file=${IMAGEPATH}/obmc-phosphor-image.rootfs.wic.qcow2,if=sd,index=2 \ -net nic -net user,hostfwd=:127.0.0.1:2222-:22,hostfwd=:127.0.0.1:2443-:443 \ -chardev socket,id=chrtpm,path=/tmp/mytpm1/swtpm-sock \ -tpmdev emulator,id=tpm0,chardev=chrtpm \ -device tpm-tis-i2c,tpmdev=tpm0,bus=aspeed.i2c.bus.12,address=0x2e Signed-off-by: Ninad Palsule <ninad@linux.ibm.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Tested-by: Joel Stanley <joel@jms.id.au> Message-id: 20230414220754.1191476-4-ninadpalsule@us.ibm.com
2023-04-20hw/arm: Add WDT to Allwinner-H3 and Orangepi-PCStrahinja Jankovic1-0/+1
This patch adds WDT to Allwinner-H3 and Orangepi-PC. WDT is added as an overlay to the Timer module memory area. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20230326202256.22980-4-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-04-20hw/arm: Add WDT to Allwinner-A10 and CubieboardStrahinja Jankovic1-0/+1
This patch adds WDT to Allwinner-A10 and Cubieboard. WDT is added as an overlay to the Timer module memory map. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20230326202256.22980-3-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-04-20hw/arm: Fix some typos in comments (most found by codespell)Stefan Weil1-1/+1
Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230409200526.1156456-1-sw@weilnetz.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-16hw/arm: Add missing XLNX_ZYNQMP_ARM -> USB_DWC3 Kconfig dependencyPhilippe Mathieu-Daudé1-0/+1
Since commit acc0b8b05a when running the ZynqMP ZCU102 board with a QEMU configured using --without-default-devices, we get: $ qemu-system-aarch64 -M xlnx-zcu102 qemu-system-aarch64: missing object type 'usb_dwc3' Abort trap: 6 Fix by adding the missing Kconfig dependency. Fixes: acc0b8b05a ("hw/arm/xlnx-zynqmp: Connect ZynqMP's USB controllers") Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230216092327.2203-1-philmd@linaro.org Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-23hw/i2c/versatile_i2c: Rename versatile_i2c -> arm_sbcon_i2cPhilippe Mathieu-Daudé1-2/+2
This device model started with the Versatile board, named TYPE_VERSATILE_I2C, then ended up renamed TYPE_ARM_SBCON_I2C as per the official "ARM SBCon two-wire serial bus interface" description from: https://developer.arm.com/documentation/dui0440/b/programmer-s-reference/two-wire-serial-bus-interface--sbcon Use the latter name as a better description. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230110082508.24038-6-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12hw/arm: Add AXP209 to CubieboardStrahinja Jankovic1-0/+1
SPL Boot for Cubieboard expects AXP209 connected to I2C0 bus. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20221226220303.14420-6-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12{hw/i2c,docs/system/arm}: Allwinner TWI/I2C EmulationStrahinja Jankovic1-0/+2
This patch implements Allwinner TWI/I2C controller emulation. Only master-mode functionality is implemented. The SPL boot for Cubieboard expects AXP209 PMIC on TWI0/I2C0 bus, so this is first part enabling the TWI/I2C bus operation. Since both Allwinner A10 and H3 use the same module, it is added for both boards. Docs are also updated for Cubieboard and Orangepi-PC board to indicate I2C availability. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-4-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12hw/misc: Allwinner A10 DRAM Controller EmulationStrahinja Jankovic1-0/+1
During SPL boot several DRAM Controller registers are used. Most important registers are those related to DRAM initialization and calibration, where SPL initiates process and waits until certain bit is set/cleared. This patch adds these registers, initializes reset values from user's guide and updates state of registers as SPL expects it. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-3-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12hw/misc: Allwinner-A10 Clock Controller Module EmulationStrahinja Jankovic1-0/+1
During SPL boot several Clock Controller Module (CCM) registers are read, most important are PLL and Tuning, as well as divisor registers. This patch adds these registers and initializes reset values from user's guide. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-2-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12hw/arm: Add Olimex H405Felipe Balbi1-0/+4
Olimex makes a series of low-cost STM32 boards. This commit introduces the minimum setup to support SMT32-H405. See [1] for details [1] https://www.olimex.com/Products/ARM/ST/STM32-H405/ Signed-off-by: Felipe Balbi <balbi@kernel.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20221230145733.200496-3-balbi@kernel.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-11-07hw/arm/virt: Enable HMAT on arm virt machineXiang Chen1-0/+1
Since the patchset ("Build ACPI Heterogeneous Memory Attribute Table (HMAT)"), HMAT is supported, but only x86 is enabled. Enable HMAT on arm virt machine. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Hesham Almatary <hesham.almatary@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20221027100037.251-7-hesham.almatary@huawei.com> Tested-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-30hw/arm/aspeed: Add MAX31785 Fan controllersMaheswara Kurapati1-0/+2
Add MAX31785 fan controllers in machines so that the Linux driver populates the sysfs interface. Firework has two MAX31785 Fan controllers at 0x52, and 0x54 on bus 9. Witherspoon has one at 0x52 on bus 3. Rainier has one at 0x52 on bus 7. Signed-off-by: Maheswara Kurapati <quic_mkurapat@quicinc.com> Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220627154703.148943-6-quic_jaehyoo@quicinc.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-05-13hw/pci-host/gpex-acpi: Add support for dsdt construction for pxb-cxlJonathan Cameron1-0/+1
This adds code to instantiate the slightly extended ACPI root port description in DSDT as per the CXL 2.0 specification. Basically a cut and paste job from the i386/pc code. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220429144110.25167-30-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-03-08hw/sensor: add Intersil ISL69260 device modelTitus Rwantare1-0/+1
Signed-off-by: Titus Rwantare <titusr@google.com> Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Corey Minyard <cminyard@mvista.com> Message-Id: <20220307200605.4001451-8-titusr@google.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-02-21Kconfig: Add 'imply I2C_DEVICES' on boards with available i2c busPeter Maydell1-0/+10
For arm boards with an i2c bus which a user could reasonably want to plug arbitrary devices, add 'imply I2C_DEVICES' to the Kconfig stanza. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Hao Wu <wuhaotsh@google.com> Message-id: 20220208155911.3408455-3-peter.maydell@linaro.org
2022-01-20hw/arm/virt: Support for virtio-mem-pciGavin Shan1-0/+1
This supports virtio-mem-pci device on "virt" platform, by simply following the implementation on x86. * This implements the hotplug handlers to support virtio-mem-pci device hot-add, while the hot-remove isn't supported as we have on x86. * The block size is 512MB on ARM64 instead of 128MB on x86. * It has been passing the tests with various combinations like 64KB and 4KB page sizes on host and guest, different memory device backends like normal, transparent huge page and HugeTLB, plus migration. Co-developed-by: David Hildenbrand <david@redhat.com> Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com> Reviewed-by: David Hildenbrand <david@redhat.com> Message-id: 20220111063329.74447-3-gshan@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-01-20hw: Move MARVELL_88W8618 Kconfig from audio/ to arm/Philippe Mathieu-Daudé1-0/+3
The Marvell 88W8618 is a system-on-chip with an ARM core. We implement its audio codecs and network interface. Homogeneous SoC Kconfig are usually defined in the hw/$ARCH directory. Move it there. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20220107184429.423572-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.1 at 2025-08-04 03:32:23 +0000