aboutsummaryrefslogtreecommitdiff
path: root/hw/arm/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2023-07-04hw/arm/sbsa-ref: use XHCI to replace EHCIYuquan Wang1-1/+1
The current sbsa-ref cannot use EHCI controller which is only able to do 32-bit DMA, since sbsa-ref doesn't have RAM below 4GB. Hence, this uses XHCI to provide a usb controller with 64-bit DMA capablity instead of EHCI. We bump the platform version to 0.3 with this change. Although the hardware at the USB controller address changes, the firmware and Linux can both cope with this -- on an older non-XHCI-aware firmware/kernel setup the probe routine simply fails and the guest proceeds without any USB. (This isn't a loss of functionality, because the old USB controller never worked in the first place.) So we can call this a backwards-compatible change and only bump the minor version. Signed-off-by: Yuquan Wang <wangyuquan1236@phytium.com.cn> Message-id: 20230621103847.447508-2-wangyuquan1236@phytium.com.cn [PMM: tweaked commit message; add line to docs about what changes in platform version 0.3] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-19hw/arm/Kconfig: sbsa-ref uses Bochs displayMarcin Juszkiewicz1-0/+1
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20230607092112.655098-1-marcin.juszkiewicz@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06hw: arm: allwinner-sramc: Add SRAM Controller support for R40qianfan Zhao1-0/+1
Only a few important registers are added, especially the SRAM_VER register. Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06hw/misc: Rename axp209 to axp22x and add support AXP221 PMUqianfan Zhao1-1/+2
This patch adds minimal support for AXP-221 PMU and connect it to bananapi M2U board. Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06hw: arm: Add bananapi M2-Ultra and allwinner-r40 supportqianfan Zhao1-0/+10
Allwinner R40 (sun8i) SoC features a Quad-Core Cortex-A7 ARM CPU, and a Mali400 MP2 GPU from ARM. It's also known as the Allwinner T3 for In-Car Entertainment usage, A40i and A40pro are variants that differ in applicable temperatures range (industrial and military). Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-05-30arm/Kconfig: Make TCG dependence explicitFabiano Rosas1-41/+82
Replace the 'default y if TCG' pattern with 'default y; depends on TCG'. That makes explict that there is a dependence on TCG and enabling these CONFIGs via .mak files without TCG present will fail earlier. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230523180525.29994-4-farosas@suse.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-05-10hw/arm: Select XLNX_USB_SUBSYS for xlnx-zcu102 machineFabiano Rosas1-0/+1
This machine hardcodes initialization of the USB device, so select the corresponding Kconfig. It is not enough to have it as "default y if XLNX_VERSAL" at usb/Kconfig because building --without-default-devices disables the default selection resulting in: $ ./qemu-system-aarch64 -M xlnx-zcu102 qemu-system-aarch64: missing object type 'usb_dwc3' Aborted (core dumped) Signed-off-by: Fabiano Rosas <farosas@suse.de> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230208192654.8854-8-farosas@suse.de> Message-Id: <20230503091244.1450613-8-alex.bennee@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-02arm/Kconfig: Do not build TCG-only boards on a KVM-only buildFabiano Rosas1-1/+41
Move all the CONFIG_FOO=y from default.mak into "default y if TCG" statements in Kconfig. That way they won't be selected when CONFIG_TCG=n. I'm leaving CONFIG_ARM_VIRT in default.mak because it allows us to keep the two default.mak files not empty and keep aarch64-default.mak including arm-default.mak. That way we don't surprise anyone that's used to altering these files. With this change we can start building with --disable-tcg. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230426180013.14814-12-farosas@suse.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-05-02arm/Kconfig: Always select SEMIHOSTING when TCG is presentFabiano Rosas1-1/+0
We are about to enable the build without TCG, so CONFIG_SEMIHOSTING and CONFIG_ARM_COMPATIBLE_SEMIHOSTING cannot be unconditionally set in default.mak anymore. So reflect the change in a Kconfig. Instead of using semihosting/Kconfig, use a target-specific file, so that the change doesn't affect other architectures which might implement semihosting in a way compatible with KVM. The selection from ARM_v7M needs to be removed to avoid a cycle during parsing. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230426180013.14814-11-farosas@suse.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-04-21Merge tag 'pull-tpm-2023-04-20-1' of ↵Richard Henderson1-0/+1
https://github.com/stefanberger/qemu-tpm into staging Merge tpm 2023/04/20 v1 # -----BEGIN PGP SIGNATURE----- # # iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAmRBLgoACgkQda1lgCoL # QhEPyQf/WfEg8k2hDLExobsSgup1IsnT+mHHTBOZVJvq2efg2YXUTHA56fmD9X6d # crqTq68L5oaMES5iYEZhA7EAgfk3RvxDQGrlXBByPzrc6SSwEHHMR4Zzi5zrbCoW # t6TmaKQrlQqYwkhhsbyqnG46bj0ugCDagkBLfJdVl96fjkYgTspcDxaNwqwy/DPn # GTmQlvdRY09D1nylIdtcLBIfsM+sIkRslyngbUEIy+Bx8EWRy2a8Qw0BdY9g1XoE # e0CaRaFMpju1KOIjq0YSIzt0LSQDFfPc1IlUAC0ZALhNmp+PPNtr4E7+4kFfO2ym # 1sT2w25ho8dYDdm/m8tIauCdGoHw4A== # =ML27 # -----END PGP SIGNATURE----- # gpg: Signature made Thu 20 Apr 2023 01:20:26 PM BST # gpg: using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211 # gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211 * tag 'pull-tpm-2023-04-20-1' of https://github.com/stefanberger/qemu-tpm: qtest: Add a test case for TPM TIS I2C connected to Aspeed I2C controller qtest: Move tpm_util_tis_transmit() into tpm-tis-utils.c and rename it qtest: Add functions for accessing devices on Aspeed I2C controller tests/avocado/aspeed: Add TPM TIS I2C test tpm: Add support for TPM device over I2C bus tpm: Extend common APIs to support TPM TIS I2C docs: Add support for TPM devices over I2C bus Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-04-20tpm: Add support for TPM device over I2C busNinad Palsule1-0/+1
Qemu already supports devices attached to ISA and sysbus. This drop adds support for the I2C bus attached TPM devices. I2C model only supports TPM2 protocol. This commit includes changes for the common code. - Added I2C emulation model. Logic was added in the model to temporarily cache the data as I2C interface works per byte basis. - New tpm type "tpm-tis-i2c" added for I2C support. The user has to provide this string on command line. Testing: TPM I2C device module is tested using SWTPM (software based TPM package). Qemu uses the rainier machine and is connected to swtpm over the socket interface. The command to start swtpm is as follows: $ swtpm socket --tpmstate dir=/tmp/mytpm1 \ --ctrl type=unixio,path=/tmp/mytpm1/swtpm-sock \ --tpm2 --log level=100 The command to start qemu is as follows: $ qemu-system-arm -M rainier-bmc -nographic \ -kernel ${IMAGEPATH}/fitImage-linux.bin \ -dtb ${IMAGEPATH}/aspeed-bmc-ibm-rainier.dtb \ -initrd ${IMAGEPATH}/obmc-phosphor-initramfs.rootfs.cpio.xz \ -drive file=${IMAGEPATH}/obmc-phosphor-image.rootfs.wic.qcow2,if=sd,index=2 \ -net nic -net user,hostfwd=:127.0.0.1:2222-:22,hostfwd=:127.0.0.1:2443-:443 \ -chardev socket,id=chrtpm,path=/tmp/mytpm1/swtpm-sock \ -tpmdev emulator,id=tpm0,chardev=chrtpm \ -device tpm-tis-i2c,tpmdev=tpm0,bus=aspeed.i2c.bus.12,address=0x2e Signed-off-by: Ninad Palsule <ninad@linux.ibm.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Tested-by: Joel Stanley <joel@jms.id.au> Message-id: 20230414220754.1191476-4-ninadpalsule@us.ibm.com
2023-04-20hw/arm: Add WDT to Allwinner-H3 and Orangepi-PCStrahinja Jankovic1-0/+1
This patch adds WDT to Allwinner-H3 and Orangepi-PC. WDT is added as an overlay to the Timer module memory area. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20230326202256.22980-4-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-04-20hw/arm: Add WDT to Allwinner-A10 and CubieboardStrahinja Jankovic1-0/+1
This patch adds WDT to Allwinner-A10 and Cubieboard. WDT is added as an overlay to the Timer module memory map. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20230326202256.22980-3-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-04-20hw/arm: Fix some typos in comments (most found by codespell)Stefan Weil1-1/+1
Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230409200526.1156456-1-sw@weilnetz.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-16hw/arm: Add missing XLNX_ZYNQMP_ARM -> USB_DWC3 Kconfig dependencyPhilippe Mathieu-Daudé1-0/+1
Since commit acc0b8b05a when running the ZynqMP ZCU102 board with a QEMU configured using --without-default-devices, we get: $ qemu-system-aarch64 -M xlnx-zcu102 qemu-system-aarch64: missing object type 'usb_dwc3' Abort trap: 6 Fix by adding the missing Kconfig dependency. Fixes: acc0b8b05a ("hw/arm/xlnx-zynqmp: Connect ZynqMP's USB controllers") Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230216092327.2203-1-philmd@linaro.org Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-23hw/i2c/versatile_i2c: Rename versatile_i2c -> arm_sbcon_i2cPhilippe Mathieu-Daudé1-2/+2
This device model started with the Versatile board, named TYPE_VERSATILE_I2C, then ended up renamed TYPE_ARM_SBCON_I2C as per the official "ARM SBCon two-wire serial bus interface" description from: https://developer.arm.com/documentation/dui0440/b/programmer-s-reference/two-wire-serial-bus-interface--sbcon Use the latter name as a better description. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230110082508.24038-6-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12hw/arm: Add AXP209 to CubieboardStrahinja Jankovic1-0/+1
SPL Boot for Cubieboard expects AXP209 connected to I2C0 bus. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20221226220303.14420-6-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12{hw/i2c,docs/system/arm}: Allwinner TWI/I2C EmulationStrahinja Jankovic1-0/+2
This patch implements Allwinner TWI/I2C controller emulation. Only master-mode functionality is implemented. The SPL boot for Cubieboard expects AXP209 PMIC on TWI0/I2C0 bus, so this is first part enabling the TWI/I2C bus operation. Since both Allwinner A10 and H3 use the same module, it is added for both boards. Docs are also updated for Cubieboard and Orangepi-PC board to indicate I2C availability. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-4-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12hw/misc: Allwinner A10 DRAM Controller EmulationStrahinja Jankovic1-0/+1
During SPL boot several DRAM Controller registers are used. Most important registers are those related to DRAM initialization and calibration, where SPL initiates process and waits until certain bit is set/cleared. This patch adds these registers, initializes reset values from user's guide and updates state of registers as SPL expects it. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-3-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12hw/misc: Allwinner-A10 Clock Controller Module EmulationStrahinja Jankovic1-0/+1
During SPL boot several Clock Controller Module (CCM) registers are read, most important are PLL and Tuning, as well as divisor registers. This patch adds these registers and initializes reset values from user's guide. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-2-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12hw/arm: Add Olimex H405Felipe Balbi1-0/+4
Olimex makes a series of low-cost STM32 boards. This commit introduces the minimum setup to support SMT32-H405. See [1] for details [1] https://www.olimex.com/Products/ARM/ST/STM32-H405/ Signed-off-by: Felipe Balbi <balbi@kernel.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20221230145733.200496-3-balbi@kernel.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-11-07hw/arm/virt: Enable HMAT on arm virt machineXiang Chen1-0/+1
Since the patchset ("Build ACPI Heterogeneous Memory Attribute Table (HMAT)"), HMAT is supported, but only x86 is enabled. Enable HMAT on arm virt machine. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Hesham Almatary <hesham.almatary@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20221027100037.251-7-hesham.almatary@huawei.com> Tested-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-30hw/arm/aspeed: Add MAX31785 Fan controllersMaheswara Kurapati1-0/+2
Add MAX31785 fan controllers in machines so that the Linux driver populates the sysfs interface. Firework has two MAX31785 Fan controllers at 0x52, and 0x54 on bus 9. Witherspoon has one at 0x52 on bus 3. Rainier has one at 0x52 on bus 7. Signed-off-by: Maheswara Kurapati <quic_mkurapat@quicinc.com> Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220627154703.148943-6-quic_jaehyoo@quicinc.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-05-13hw/pci-host/gpex-acpi: Add support for dsdt construction for pxb-cxlJonathan Cameron1-0/+1
This adds code to instantiate the slightly extended ACPI root port description in DSDT as per the CXL 2.0 specification. Basically a cut and paste job from the i386/pc code. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220429144110.25167-30-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-03-08hw/sensor: add Intersil ISL69260 device modelTitus Rwantare1-0/+1
Signed-off-by: Titus Rwantare <titusr@google.com> Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Corey Minyard <cminyard@mvista.com> Message-Id: <20220307200605.4001451-8-titusr@google.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-02-21Kconfig: Add 'imply I2C_DEVICES' on boards with available i2c busPeter Maydell1-0/+10
For arm boards with an i2c bus which a user could reasonably want to plug arbitrary devices, add 'imply I2C_DEVICES' to the Kconfig stanza. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Hao Wu <wuhaotsh@google.com> Message-id: 20220208155911.3408455-3-peter.maydell@linaro.org
2022-01-20hw/arm/virt: Support for virtio-mem-pciGavin Shan1-0/+1
This supports virtio-mem-pci device on "virt" platform, by simply following the implementation on x86. * This implements the hotplug handlers to support virtio-mem-pci device hot-add, while the hot-remove isn't supported as we have on x86. * The block size is 512MB on ARM64 instead of 128MB on x86. * It has been passing the tests with various combinations like 64KB and 4KB page sizes on host and guest, different memory device backends like normal, transparent huge page and HugeTLB, plus migration. Co-developed-by: David Hildenbrand <david@redhat.com> Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com> Reviewed-by: David Hildenbrand <david@redhat.com> Message-id: 20220111063329.74447-3-gshan@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-01-20hw: Move MARVELL_88W8618 Kconfig from audio/ to arm/Philippe Mathieu-Daudé1-0/+3
The Marvell 88W8618 is a system-on-chip with an ARM core. We implement its audio codecs and network interface. Homogeneous SoC Kconfig are usually defined in the hw/$ARCH directory. Move it there. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20220107184429.423572-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-12-15hw/arm/virt-acpi-build: Add VIOT table for virtio-iommuJean-Philippe Brucker1-0/+1
When a virtio-iommu is instantiated, describe it using the ACPI VIOT table. Acked-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-2-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-30hw/arm: xlnx-versal-virt: Add Xilinx eFUSE deviceTong Ho1-0/+1
Connect the support for Versal eFUSE one-time field-programmable bit array. The command argument: -drive if=pflash,index=1,... Can be used to optionally connect the bit array to a backend storage, such that field-programmed values in one invocation can be made available to next invocation. The backend storage must be a seekable binary file, and its size must be 3072 bytes or larger. A file with all binary 0's is a 'blank'. Signed-off-by: Tong Ho <tong.ho@xilinx.com> Message-id: 20210917052400.1249094-7-tong.ho@xilinx.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-30hw/arm: xlnx-versal-virt: Add Xilinx BBRAM deviceTong Ho1-0/+1
Connect the support for Versal Battery-Backed RAM (BBRAM) The command argument: -drive if=pflash,index=0,... Can be used to optionally connect the bbram to a backend storage, such that field-programmed values in one invocation can be made available to next invocation. The backend storage must be a seekable binary file, and its size must be 36 bytes or larger. A file with all binary 0's is a 'blank'. Signed-off-by: Tong Ho <tong.ho@xilinx.com> Message-id: 20210917052400.1249094-6-tong.ho@xilinx.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-20hw/misc: Add Infineon DPS310 sensor modelJoel Stanley1-0/+1
This contains some hardcoded register values that were obtained from the hardware after reading the temperature. It does enough to test the Linux kernel driver. The FIFO mode, IRQs and operation modes other than the default as used by Linux are not modelled. Signed-off-by: Joel Stanley <joel@jms.id.au> Message-Id: <20210616073358.750472-2-joel@jms.id.au> [ clg: - Fixed sequential reading - Reworked regs_reset_state array - Moved model under hw/sensor/ ] Message-Id: <20210629142336.750058-4-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-09-01hw/arm/stellaris: Split stellaris-gptm into its own filePeter Maydell1-0/+1
The implementation of the Stellaris general purpose timer module device stellaris-gptm is currently in the same source file as the board model. Split it out into its own source file in hw/timer. Apart from the new file comment headers and the Kconfig and meson.build changes, this is just code movement. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Message-id: 20210812093356.1946-24-peter.maydell@linaro.org
2021-08-26hw/arm/Kconfig: no need to enable ACPI_MEMORY_HOTPLUG/ACPI_NVDIMM explicitlyAni Sinha1-2/+0
Since commit 36b79e3219d ("hw/acpi/Kconfig: Add missing Kconfig dependencies (build error)"), ACPI_MEMORY_HOTPLUG and ACPI_NVDIMM is implicitly turned on when ACPI_HW_REDUCED is selected. ACPI_HW_REDUCED is already enabled. No need to turn on ACPI_MEMORY_HOTPLUG or ACPI_NVDIMM explicitly. This is a minor cleanup. Signed-off-by: Ani Sinha <ani@anisinha.ca> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210819162637.518507-1-ani@anisinha.ca Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-07-20hw/arm/Kconfig: Add missing SDHCI symbol to FSL_IMX25Philippe Mathieu-Daudé1-0/+1
Commit bfae1772c43 ("hw/arm/fsl-imx25: Wire up eSDHC controllers") added a dependency on the TYPE_IMX_USDHC model, but forgot to add the Kconfig selector. Fix that to solve when built stand-alone: $ qemu-system-arm -M imx25-pdk qemu-system-arm: missing object type 'imx-usdhc' Aborted (core dumped) Fixes: bfae1772c43 ("hw/arm/fsl-imx25: Wire up eSDHC controllers") Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210515173716.358295-6-philmd@redhat.com>
2021-07-20hw/arm/Kconfig: Remove unused DS1338 symbol from i.MX25 PDK BoardPhilippe Mathieu-Daudé1-1/+0
In commit c4f00daa5b3 ("imx25-pdk: create ds1338 for qtest inside the test") we removed the DS1338 device from the i.MX25 machine but forgot to remove it in the machine Kconfig definitions, do it now. Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210515173716.358295-5-philmd@redhat.com>
2021-07-20hw/arm/Kconfig: Add missing dependency NPCM7XX -> SMBUSPhilippe Mathieu-Daudé1-0/+1
The TYPE_NPCM7XX_SMBUS device model exposes an SMBus, but this isn't advertised with proper Kconfig symbol, leading to an early build failure when building NPCM7XX machines standalone: The following clauses were found for AT24C config AT24C depends on I2C select AT24C if NPCM7XX Fix by adding SMBUS to NPCM7XX. Fixes: 94e77879395 ("hw/i2c: Implement NPCM7XX SMBus Module Single Mode") Reviewed-by: Hao Wu <wuhaotsh@google.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210515173716.358295-4-philmd@redhat.com>
2021-07-11Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into ↵Peter Maydell1-0/+4
staging * More SVM fixes (Lara) * Module annotation database (Gerd) * Memory leak fixes (myself) * Build fixes (myself) * --with-devices-* support (Alex) # gpg: Signature made Fri 09 Jul 2021 17:23:52 BST # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini-gitlab/tags/for-upstream: (48 commits) meson: Use input/output for entitlements target configure: allow the selection of alternate config in the build configs: rename default-configs to configs and reorganise hw/arm: move CONFIG_V7M out of default-devices hw/arm: add dependency on OR_IRQ for XLNX_VERSAL meson: Introduce target-specific Kconfig meson: switch function tests from compilation to linking vl: fix leak of qdict_crumple return value target/i386: fix exceptions for MOV to DR target/i386: Added DR6 and DR7 consistency checks target/i386: Added MSRPM and IOPM size check monitor/tcg: move tcg hmp commands to accel/tcg, register them dynamically usb: build usb-host as module monitor/usb: register 'info usbhost' dynamically usb: drop usb_host_dev_is_scsi_storage hook monitor: allow register hmp commands accel: build tcg modular accel: add tcg module annotations accel: build qtest modular accel: add qtest module annotations ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-07-11Merge remote-tracking branch 'remotes/cminyard/tags/for-qemu-6.1-2' into stagingPeter Maydell1-0/+3
Some qemu updates for IPMI and I2C Move some ADC file to where they belong and move some sensors to a sensor directory, since with new BMCs coming in lots of different sensors should be coming in. Keep from cluttering things up. Add support for I2C PMBus devices. Replace the confusing and error-prone i2c_send_recv and i2c_transfer with specific send and receive functions. Several errors have already been made with these, avoid any new errors. Fix the watchdog_expired field in the IPMI watchdog, it's not a bool, it's a u8. After a vmstate transfer, the new value could be wrong. # gpg: Signature made Fri 09 Jul 2021 17:25:04 BST # gpg: using RSA key FD0D5CE67CE0F59A6688268661F38C90919BFF81 # gpg: Good signature from "Corey Minyard <cminyard@mvista.com>" [unknown] # gpg: aka "Corey Minyard <minyard@acm.org>" [unknown] # gpg: aka "Corey Minyard <corey@minyard.net>" [unknown] # gpg: aka "Corey Minyard <minyard@mvista.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: FD0D 5CE6 7CE0 F59A 6688 2686 61F3 8C90 919B FF81 * remotes/cminyard/tags/for-qemu-6.1-2: (24 commits) tests/qtest: add tests for MAX34451 device model hw/misc: add MAX34451 device tests/qtest: add tests for ADM1272 device model hw/misc: add ADM1272 device hw/i2c: add support for PMBus ipmi/sim: fix watchdog_expired data type error in IPMIBmcSim struct hw/i2c: Introduce i2c_start_recv() and i2c_start_send() hw/i2c: Extract i2c_do_start_transfer() from i2c_start_transfer() hw/i2c: Make i2c_start_transfer() direction argument a boolean hw/i2c: Rename i2c_set_slave_address() -> i2c_slave_set_address() hw/i2c: Remove confusing i2c_send_recv() hw/misc/auxbus: Replace i2c_send_recv() by i2c_recv() & i2c_send() hw/misc/auxbus: Replace 'is_write' boolean by its value hw/misc/auxbus: Explode READ_I2C / WRITE_I2C_MOT cases hw/misc/auxbus: Fix MOT/classic I2C mode hw/i2c/ppc4xx_i2c: Replace i2c_send_recv() by i2c_recv() & i2c_send() hw/i2c/ppc4xx_i2c: Add reference to datasheet hw/display/sm501: Replace i2c_send_recv() by i2c_recv() & i2c_send() hw/display/sm501: Simplify sm501_i2c_write() logic hw/input/lm832x: Define TYPE_LM8323 in public header ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-07-09hw/arm: move CONFIG_V7M out of default-devicesAlex Bennée1-0/+3
We currently select CONFIG_V7M for a bunch of our m-profile devices. The last sticking point is translate.c which cannot be compiled without expecting v7m support. Express this dependency in Kconfig rather than in default devices as a stepping stone to a fully configurable translate.c. While we are at it we also need to select ARM_COMPATIBLE_SEMIHOSTING as that is implied for M profile machines. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210707131744.26027-4-alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-09hw/arm: add dependency on OR_IRQ for XLNX_VERSALAlex Bennée1-0/+1
We need this functionality due to: /* XRAM IRQs get ORed into a single line. */ object_initialize_child(OBJECT(s), "xram-irq-orgate", &s->lpd.xram.irq_orgate, TYPE_OR_IRQ); Fixes: a55b441b2ca ("hw/arm: versal: Add support for the XRAMs") Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210707131744.26027-3-alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-09stm32vldiscovery: Add the STM32VLDISCOVERY MachineAlexandre Iooss1-0/+4
This is a Cortex-M3 based machine. Information can be found at: https://www.st.com/en/evaluation-tools/stm32vldiscovery.html Signed-off-by: Alexandre Iooss <erdnaxe@crans.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210617165647.2575955-3-erdnaxe@crans.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-07-09stm32f100: Add the stm32f100 SoCAlexandre Iooss1-0/+6
This SoC is similar to stm32f205 SoC. This will be used by the STM32VLDISCOVERY to create a machine. Signed-off-by: Alexandre Iooss <erdnaxe@crans.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210617165647.2575955-2-erdnaxe@crans.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-07-08hw/misc: add MAX34451 deviceTitus Rwantare1-0/+1
The MAX34451 is a Maxim power-supply system manager that can monitor up to 16 voltage rails or currents. It also contains a temperature sensor and supports up to four external temperature sensors. This commit adds support for interfacing with it, and setting limits on the supported sensors. Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Hao Wu <wuhaotsh@google.com> Signed-off-by: Titus Rwantare <titusr@google.com> Message-Id: <20210708172556.1868139-5-titusr@google.com> [Moved the device to the sensor directory] Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-07-08hw/misc: add ADM1272 deviceTitus Rwantare1-0/+1
The ADM1272 is a PMBus compliant Hot Swap Controller and Digital Power Monitor by Analog Devices. This commit adds support for interfacing with it, and support for setting and monitoring sensor limits. Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1272.pdf Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Hao Wu <wuhaotsh@google.com> Signed-off-by: Titus Rwantare <titusr@google.com> Message-Id: <20210708172556.1868139-3-titusr@google.com> [Moved the device to the sensor directory] [remove include of trace.h, it is not needed] Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-07-08hw/i2c: add support for PMBusTitus Rwantare1-0/+1
QEMU has support for SMBus devices, and PMBus is a more specific implementation of SMBus. The additions made in this commit makes it easier to add new PMBus devices to QEMU. https://pmbus.org/specification-archives/ Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Hao Wu <wuhaotsh@google.com> Signed-off-by: Titus Rwantare <titusr@google.com> Message-Id: <20210708172556.1868139-2-titusr@google.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-06-16hw/arm: quanta-q71l add pca954x muxesPatrick Venture1-0/+1
Adds the pca954x muxes expected. Tested: Booted quanta-q71l image to userspace. Signed-off-by: Patrick Venture <venture@google.com> Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-id: 20210608202522.2677850-4-venture@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-06-16hw/arm: gsj add pca9548Patrick Venture1-0/+1
Tested: Quanta-gsj firmware booted. i2c /dev entries driver I2C init bus 1 freq 100000 I2C init bus 2 freq 100000 I2C init bus 3 freq 100000 I2C init bus 4 freq 100000 I2C init bus 8 freq 100000 I2C init bus 9 freq 100000 at24 9-0055: 8192 byte 24c64 EEPROM, writable, 1 bytes/write I2C init bus 10 freq 100000 at24 10-0055: 8192 byte 24c64 EEPROM, writable, 1 bytes/write I2C init bus 12 freq 100000 I2C init bus 15 freq 100000 i2c i2c-15: Added multiplexed i2c bus 16 i2c i2c-15: Added multiplexed i2c bus 17 i2c i2c-15: Added multiplexed i2c bus 18 i2c i2c-15: Added multiplexed i2c bus 19 i2c i2c-15: Added multiplexed i2c bus 20 i2c i2c-15: Added multiplexed i2c bus 21 i2c i2c-15: Added multiplexed i2c bus 22 i2c i2c-15: Added multiplexed i2c bus 23 pca954x 15-0075: registered 8 multiplexed busses for I2C switch pca9548 Signed-off-by: Patrick Venture <venture@google.com> Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20210608202522.2677850-3-venture@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-26hw/mem/nvdimm: Use Kconfig 'imply' instead of 'depends on'Philippe Mathieu-Daudé1-0/+1
Per the kconfig.rst: A device should be listed [...] ``imply`` if (depending on the QEMU command line) the board may or may not be started without it. This is the case with the NVDIMM device, so use the 'imply' weak reverse dependency to select the symbol. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210511155354.3069141-2-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-02hw/arm/pxa2xx: Declare PCMCIA bus with KconfigPhilippe Mathieu-Daudé1-0/+1
The Intel XScale PXA chipsets provide a PCMCIA controller, which expose a PCMCIA bus. Express this dependency using the Kconfig 'select' expression. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210424222057.3434459-2-f4bug@amsat.org> [lv: remove "(IDE)"] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
generated by cgit v1.1 at 2024-12-25 06:40:47 +0000