aboutsummaryrefslogtreecommitdiff
path: root/hw/acpi
AgeCommit message (Collapse)AuthorFilesLines
2019-02-01uuid: Make qemu_uuid_bswap() take and return a QemuUUIDPeter Maydell1-4/+2
Currently qemu_uuid_bswap() takes a pointer to the QemuUUID to be byte-swapped. This means it can't be used when the UUID to be swapped is in a packed member of a struct. It's also out of line with the general bswap*() functions we provide in bswap.h, which take the value to be swapped and return it. Make qemu_uuid_bswap() take a QemuUUID and return the swapped version. This fixes some clang warnings about taking the address of a packed struct member in block/vdi.c. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-01-30typo: apci->acpiDr. David Alan Gilbert1-1/+1
apci_1_compatible should be acpi_1_compatible. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190125094047.22276-1-dgilbert@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-01-17hw/acpi: Use QEMU_NONSTRING for non NUL-terminated arraysPhilippe Mathieu-Daudé1-4/+8
GCC 8 added a -Wstringop-truncation warning: The -Wstringop-truncation warning added in GCC 8.0 via r254630 for bug 81117 is specifically intended to highlight likely unintended uses of the strncpy function that truncate the terminating NUL character from the source string. This new warning leads to compilation failures: CC hw/acpi/core.o In function 'acpi_table_install', inlined from 'acpi_table_add' at qemu/hw/acpi/core.c:296:5: qemu/hw/acpi/core.c:184:9: error: 'strncpy' specified bound 4 equals destination size [-Werror=stringop-truncation] strncpy(ext_hdr->sig, hdrs->sig, sizeof ext_hdr->sig); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ make: *** [qemu/rules.mak:69: hw/acpi/core.o] Error 1 Use the QEMU_NONSTRING attribute, since ACPI tables don't require the strings to be NUL-terminated. Suggested-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-01-17hw: acpi: Fix memory hotplug AML generation errorYang Zhong1-5/+5
When using the generated memory hotplug AML, the iasl compiler would give the following error: dsdt.dsl 266: Return (MOST (_UID, Arg0, Arg1, Arg2)) Error 6080 - Called method returns no value ^ Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-17acpi: add ACPI memory clear interfaceMarc-André Lureau1-0/+55
The interface is described in the "TCG Platform Reset Attack Mitigation Specification", chapter 6 "ACPI _DSM Function". According to Laszlo, it's not so easy to implement in OVMF, he suggested to do it in qemu instead. See specification documentation for more details, and next commit for memory clear on reset handling. The underlying TCG specification is accessible from the following page. https://trustedcomputinggroup.org/resource/pc-client-work-group-platform-reset-attack-mitigation-specification-version-1-0/ This patch implements version 1.0. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-17acpi: build TPM Physical Presence interfaceStefan Berger2-0/+405
The TPM Physical Presence interface consists of an ACPI part, a shared memory part, and code in the firmware. Users can send messages to the firmware by writing a code into the shared memory through invoking the ACPI code. When a reboot happens, the firmware looks for the code and acts on it by sending sequences of commands to the TPM. This patch adds the ACPI code. It is similar to the one in EDK2 but doesn't assume that SMIs are necessary to use. It uses a similar datastructure for the shared memory as EDK2 does so that EDK2 and SeaBIOS could both make use of it. I extended the shared memory data structure with an array of 256 bytes, one for each code that could be implemented. The array contains flags describing the individual codes. This decouples the ACPI implementation from the firmware implementation. The underlying TCG specification is accessible from the following page. https://trustedcomputinggroup.org/tcg-physical-presence-interface-specification/ This patch implements version 1.30. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> [ Marc-André - ACPI code improvements and windows fixes ] Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-20pci/pcihp: perform unplug via the hotplug handlerDavid Hildenbrand2-3/+15
Introduce and use the "unplug" callback. This is a preparation for multi-stage hotplug handlers, whereby the bus hotplug handler is overwritten by the machine hotplug handler. This handler will then pass control to the bus hotplug handler. So to get this running cleanly, we also have to make sure to go via the hotplug handler chain when actually unplugging a device after an unplug request. Lookup the hotplug handler and call "unplug". Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-20pci/pcihp: overwrite hotplug handler recursively from the startDavid Hildenbrand2-15/+16
For now, the hotplug handler is not called for devices that are being cold plugged. The hotplug handler is setup when the machine initialization is fully done. Only bridges that were cold plugged are considered. Set the hotplug handler for the root piix bus directly when realizing. Overwrite the hotplug handler of bridges when coldplugging them. This will now make sure that the ACPI PCI hotplug handler is also called for cold plugged devices (also on bridges) but not for bridges that were hotplugged (keeping the current behavior). Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-20pci/pcihp: perform check for bus capability in pre_plug handlerDavid Hildenbrand2-8/+29
Perform the check in the pre_plug handler. In addition, we need the capability only if the device is actually hotplugged (and not created during machine initialization). This is a preparation for coldplugging pci devices via that hotplug handler. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19hw: acpi: Export and share the ARM RSDP buildSamuel Ortiz1-0/+68
Now that build_rsdp() supports building both legacy and current RSDP tables, we can move it to a generic folder (hw/acpi) and have the i386 ACPI code reuse it in order to reduce code duplication. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com>
2018-12-19pc:piix4: Update smbus I/O space after a migrationCorey Minyard1-0/+1
Otherwise it won't be set up correctly and won't work after miigration. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-18qmp hmp: Make system_wakeup check wake-up support and run stateDaniel Henrique Barboza1-1/+2
The qmp/hmp command 'system_wakeup' is simply a direct call to 'qemu_system_wakeup_request' from vl.c. This function verifies if runstate is SUSPENDED and if the wake up reason is valid before proceeding. However, no error or warning is thrown if any of those pre-requirements isn't met. There is no way for the caller to differentiate between a successful wakeup or an error state caused when trying to wake up a guest that wasn't suspended. This means that system_wakeup is silently failing, which can be considered a bug. Adding error handling isn't an API break in this case - applications that didn't check the result will remain broken, the ones that check it will have a chance to deal with it. Adding to that, the commit before previous created a new QMP API called query-current-machine, with a new flag called wakeup-suspend-support, that indicates if the guest has the capability of waking up from suspended state. Although such guest will never reach SUSPENDED state and erroring it out in this scenario would suffice, it is more informative for the user to differentiate between a failure because the guest isn't suspended versus a failure because the guest does not have support for wake up at all. All this considered, this patch changes qmp_system_wakeup to check if the guest is capable of waking up from suspend, and if it is suspended. After this patch, this is the output of system_wakeup in a guest that does not have wake-up from suspend support (ppc64): (qemu) system_wakeup wake-up from suspend is not supported by this guest (qemu) And this is the output of system_wakeup in a x86 guest that has the support but isn't suspended: (qemu) system_wakeup Unable to wake up: guest is not in suspended state (qemu) Reported-by: Balamuruhan S <bala24@linux.vnet.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20181205194701.17836-4-danielhb413@gmail.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-12-18qmp: query-current-machine with wakeup-suspend-supportDaniel Henrique Barboza1-0/+6
When issuing the qmp/hmp 'system_wakeup' command, what happens in a nutshell is: - qmp_system_wakeup_request set runstate to RUNNING, sets a wakeup_reason and notify the event - in the main_loop, all vcpus are paused, a system reset is issued, all subscribers of wakeup_notifiers receives a notification, vcpus are then resumed and the wake up QAPI event is fired Note that this procedure alone doesn't ensure that the guest will awake from SUSPENDED state - the subscribers of the wake up event must take action to resume the guest, otherwise the guest will simply reboot. At this moment, only the ACPI machines via acpi_pm1_cnt_init and xen_hvm_init have wake-up from suspend support. However, only the presence of 'system_wakeup' is required for QGA to support 'guest-suspend-ram' and 'guest-suspend-hybrid' at this moment. This means that the user/management will expect to suspend the guest using one of those suspend commands and then resume execution using system_wakeup, regardless of the support offered in system_wakeup in the first place. This patch creates a new API called query-current-machine [1], that holds a new flag called 'wakeup-suspend-support' that indicates if the guest supports wake up from suspend via system_wakeup. The machine is considered to implement wake-up support if a call to a new 'qemu_register_wakeup_support' is made during its init, as it is now being done inside acpi_pm1_cnt_init and xen_hvm_init. This allows for any other machine type to declare wake-up support regardless of ACPI state or wakeup_notifiers subscription, making easier for newer implementations that might have their own mechanisms in the future. This is the expected output of query-current-machine when running a x86 guest: {"execute" : "query-current-machine"} {"return": {"wakeup-suspend-support": true}} Running the same x86 guest, but with the --no-acpi option: {"execute" : "query-current-machine"} {"return": {"wakeup-suspend-support": false}} This is the output when running a pseries guest: {"execute" : "query-current-machine"} {"return": {"wakeup-suspend-support": false}} With this extra tool, management can avoid situations where a guest that does not have proper suspend/wake capabilities ends up in inconsistent state (e.g. https://github.com/open-power-host-os/qemu/issues/31). [1] the decision of creating the query-current-machine API is based on discussions in the QEMU mailing list where it was decided that query-target wasn't a proper place to store the wake-up flag, neither was query-machines because this isn't a static property of the machine object. This new API can then be used to store other dynamic machine properties that are scattered around the code ATM. More info at: https://lists.gnu.org/archive/html/qemu-devel/2018-05/msg04235.html Reported-by: Balamuruhan S <bala24@linux.vnet.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20181205194701.17836-2-danielhb413@gmail.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-11-12hw/acpi/nvdimm: Don't take address of fields in packed structsPeter Maydell1-8/+8
Taking the address of a field in a packed struct is a bad idea, because it might not be actually aligned enough for that pointer type (and thus cause a crash on dereference on some host architectures). Newer versions of clang warn about this. Avoid the bug by not using the "modify in place" byte swapping functions. Patch produced with scripts/coccinelle/inplace-byteswaps.cocci. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20181016175236.5840-1-peter.maydell@linaro.org
2018-09-24Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell1-4/+6
pci, pc, virtio: fixes, features pci resource capability + misc fixes everywhere. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri 07 Sep 2018 22:50:38 BST # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: tests: update acpi expected files vhost: fix invalid downcast pc: make sure that guest isn't able to unplug the first cpu hw/pci: add PCI resource reserve capability to legacy PCI bridge hw/pci: factor PCI reserve resources to a separate structure virtio: update MemoryRegionCaches when guest negotiates features pc: acpi: revert back to 1 SRAT entry for hotpluggable area Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-09-07pc: make sure that guest isn't able to unplug the first cpuIgor Mammedov1-4/+6
The first cpu unplug wasn't ever supported and corresponding monitor/qmp commands refuse to unplug it. However guest is able to issue eject request either using following command: # echo 1 >/sys/devices/system/cpu/cpu0/firmware_node/eject or directly writing to cpu hotplug registers, which makes qemu crash with SIGSEGV following back trace: kvm_flush_coalesced_mmio_buffer () while (ring->first != ring->last) ... qemu_flush_coalesced_mmio_buffer prepare_mmio_access flatview_read_continue flatview_read address_space_read_full address_space_rw kvm_cpu_exec(cpu!0) qemu_kvm_cpu_thread_fn the reason for which is that ring == KVMState::coalesced_mmio_ring happens to be a part of 1st CPU that was uplugged by guest. Fix it by forbidding 1st cpu unplug from guest side and in addition remove CPU0._EJ0 ACPI method to make clear that unplug of the first CPU is not supported. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-28qapi: Drop qapi_event_send_FOO()'s Error ** argumentPeter Xu3-5/+4
The generated qapi_event_send_FOO() take an Error ** argument. They can't actually fail, because all they do with the argument is passing it to functions that can't fail: the QObject output visitor, and the @qmp_emit callback, which is either monitor_qapi_event_queue() or event_test_emit(). Drop the argument, and pass &error_abort to the QObject output visitor and @qmp_emit instead. Suggested-by: Eric Blake <eblake@redhat.com> Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180815133747.25032-4-peterx@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message rewritten, update to qapi-code-gen.txt corrected] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-08-23i2c: pm_smbus: Add the ability to force block transfer enableCorey Minyard1-1/+1
The PIIX4 hardware has block transfer buffer always enabled in the hardware, but the i801 does not. Add a parameter to pm_smbus_init to force on the block transfer so the PIIX4 handler can enable this by default, as it was disabled by default before. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1534796770-10295-9-git-send-email-minyard@acm.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-11nvdimm: make persistence option symbolicRoss Zwisler1-2/+2
Replace the "nvdimm-cap" option which took numeric arguments such as "2" with a more user friendly "nvdimm-persistence" option which takes symbolic arguments "cpu" or "mem-ctrl". Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Suggested-by: Michael S. Tsirkin <mst@redhat.com> Suggested-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-06-04Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell1-4/+41
acpi, vhost, misc: fixes, features vDPA support, fix to vhost blk RO bit handling, some include path cleanups, NFIT ACPI table. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri 01 Jun 2018 17:25:19 BST # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (31 commits) vhost-blk: turn on pre-defined RO feature bit ACPI testing: test NFIT platform capabilities nvdimm, acpi: support NFIT platform capabilities tests/.gitignore: add entry for generated file arch_init: sort architectures ui: use local path for local headers qga: use local path for local headers colo: use local path for local headers migration: use local path for local headers usb: use local path for local headers sd: fix up include vhost-scsi: drop an unused include ppc: use local path for local headers rocker: drop an unused include e1000e: use local path for local headers ioapic: fix up includes ide: use local path for local headers display: use local path for local headers trace: use local path for local headers migration: drop an unused include ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-01nvdimm, acpi: support NFIT platform capabilitiesRoss Zwisler1-4/+41
Add a machine command line option to allow the user to control the Platform Capabilities Structure in the virtualized NFIT. This Platform Capabilities Structure was added in ACPI 6.2 Errata A. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-06-01hw: Do not include "exec/ioport.h" if it is not necessaryPhilippe Mathieu-Daudé2-2/+0
Code change produced with: $ git grep '#include "exec/ioport.h"' hw | \ cut -d: -f-1 | \ xargs egrep -Li "(portio|cpu_(in|out).\()" | \ xargs sed -i.bak '/#include "exec\/ioport.h"/d' Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-11-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum<marcel.apfelbaum@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-20acpi: fix a comment about aml_call0()Marc-André Lureau1-1/+1
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2018-03-13virt_arm: acpi: reuse common build_fadt()Igor Mammedov1-2/+21
Extend generic build_fadt() to support rev5.1 FADT and reuse it for 'virt' board, it would allow to phase out usage of AcpiFadtDescriptorRev5_1 and later ACPI_FADT_COMMON_DEF. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-13acpi: move build_fadt() from i386 specific to generic ACPI sourceIgor Mammedov1-0/+105
It will be extended and reused by follow up patch for ARM target. PS: Since it's generic function now, don't patch FIRMWARE_CTRL, DSDT fields if they don't point to tables since platform might not provide them and use X_ variants instead if applicable. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-13acpi: add build_append_gas() helper for Generic Address StructureIgor Mammedov1-0/+16
it will help to add Generic Address Structure to ACPI tables without using packed C structures and avoid endianness issues as API doesn't need an explicit conversion. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-02qapi: Empty out qapi-schema.jsonMarkus Armbruster4-4/+4
The previous commit improved compile time by including less of the generated QAPI headers. This is impossible for stuff defined directly in qapi-schema.json, because that ends up in headers that that pull in everything. Move everything but include directives from qapi-schema.json to new sub-module qapi/misc.json, then include just the "misc" shard where possible. It's possible everywhere, except: * monitor.c needs qmp-command.h to get qmp_init_marshal() * monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need qapi-event.h to get enum QAPIEvent Perhaps we'll get rid of those some other day. Adding a type to qapi/migration.json now recompiles some 120 instead of 2300 out of 5100 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-25-armbru@redhat.com> [eblake: rebase to master] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02Include less of the generated modular QAPI headersMarkus Armbruster1-1/+1
In my "build everything" tree, a change to the types in qapi-schema.json triggers a recompile of about 4800 out of 5100 objects. The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h, qapi-types.h. Each of these headers still includes all its shards. Reduce compile time by including just the shards we actually need. To illustrate the benefits: adding a type to qapi/migration.json now recompiles some 2300 instead of 4800 objects. The next commit will improve it further. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-24-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> [eblake: rebase to master] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-09Move include qemu/option.h from qemu-common.h to actual usersMarkus Armbruster1-0/+1
qemu-common.h includes qemu/option.h, but most places that include the former don't actually need the latter. Drop the include, and add it to the places that actually need it. While there, drop superfluous includes of both headers, and separate #include from file comment with a blank line. This cleanup makes the number of objects depending on qemu/option.h drop from 4545 (out of 4743) to 284 in my "build everything" tree. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-20-armbru@redhat.com> [Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
2018-02-09Include qmp-commands.h exactly where neededMarkus Armbruster1-1/+0
Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-7-armbru@redhat.com> [OSX breakage fixed]
2018-02-09Include qapi/error.h exactly where neededMarkus Armbruster4-0/+5
This cleanup makes the number of objects depending on qapi/error.h drop from 1910 (out of 4743) to 1612 in my "build everything" tree. While there, separate #include from file comment with a blank line, and drop a useless comment on why qemu/osdep.h is included first. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-5-armbru@redhat.com> [Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
2018-01-19nvdimm: add 'unarmed' optionHaozhong Zhang1-0/+7
Currently the only vNVDIMM backend can guarantee the guest write persistence is device DAX on Linux, because no host-side kernel cache is involved in the guest access to it. The approach to detect whether the backend is device DAX needs to access sysfs, which may not work with SELinux. Instead, we add the 'unarmed' option to device 'nvdimm', so that users or management utils, which have enough knowledge about the backend, can control the unarmed flag in guest ACPI NFIT via this option. The guest Linux NVDIMM driver, for example, will mark the corresponding vNVDIMM device read-only if the unarmed flag in guest NFIT is set. The default value of 'unarmed' option is 'off' in order to keep the backwards compatibility. Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Message-Id: <20171211072806.2812-4-haozhong.zhang@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-01-11Merge remote-tracking branch 'origin/master' into HEADMichael S. Tsirkin2-1/+1
Resolve conflicts around apb. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-12-18hw/acpi: ACPI_PM_* defines are not restricted to i386 archPhilippe Mathieu-Daudé1-1/+0
this allows to remove the old i386/pc dependency on acpi/core. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-12-18hw: use "qemu/osdep.h" as first #include in source filesPhilippe Mathieu-Daudé1-0/+1
applied using ./scripts/clean-includes Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-12-05pci: Eliminate redundant PCIDevice::bus pointerDavid Gibson2-5/+6
The bus pointer in PCIDevice is basically redundant with QOM information. It's always initialized to the qdev_get_parent_bus(), the only difference is the type. Therefore this patch eliminates the field, instead creating a pci_get_bus() helper to do the type mangling to derive it conveniently from the QOM Device object underneath. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-12-05vmgenid: use UUID property typeRoman Kagan1-22/+8
Switch vmgenid device to use the UUID property type introduced in the previous patch for its 'guid' property. One semantic change it introduces is that post-realize modification of 'guid' via HMP or QMP will now be rejected with an error; however, according to docs/specs/vmgenid.txt this is actually desirable. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Ben Warren <ben@skyportsystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-19Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell2-2/+13
* TCG 8-byte atomic accesses bugfix (Andrew) * Report disk rotation rate (Daniel) * Report invalid scsi-disk block size configuration (Mark) * KVM and memory API MemoryListener fixes (David, Maxime, Peter Xu) * x86 CPU hotplug crash fix (Igor) * Load/store API documentation (Peter Maydell) * Small fixes by myself and Thomas * qdev DEVICE_DELETED deferral (Michael) # gpg: Signature made Wed 18 Oct 2017 10:56:24 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (29 commits) scsi: reject configurations with logical block size > physical block size qdev: defer DEVICE_DEL event until instance_finalize() Revert "qdev: Free QemuOpts when the QOM path goes away" qdev: store DeviceState's canonical path to use when unparenting qemu-pr-helper: use new libmultipath API watch_mem_write: implement 8-byte accesses notdirty_mem_write: implement 8-byte accesses memory: reuse section_from_flat_range() kvm: simplify kvm_align_section() kvm: region_add and region_del is not called on updates kvm: fix error message when failing to unregister slot kvm: tolerate non-existing slot for log_start/log_stop/log_sync kvm: fix alignment of ram address memory: call log_start after region_add target/i386: trap on instructions longer than >15 bytes target/i386: introduce x86_ld*_code tco: add trace events docs/devel/loads-stores.rst: Document our various load and store APIs nios2: define tcg_env build: remove CONFIG_LIBDECNUMBER ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-10-16tco: add trace eventsPaolo Bonzini2-2/+13
Add trace events to the PCH watchdog timer, it can be useful to see how the guest is using it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1507816448-86665-1-git-send-email-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-10-15pci: Add INTERFACE_CONVENTIONAL_PCI_DEVICE to Conventional PCI devicesEduardo Habkost1-0/+1
Add INTERFACE_CONVENTIONAL_PCI_DEVICE to all direct subtypes of TYPE_PCI_DEVICE, except: 1) The ones that already have INTERFACE_PCIE_DEVICE set: * base-xhci * e1000e * nvme * pvscsi * vfio-pci * virtio-pci * vmxnet3 2) base-pci-bridge Not all PCI bridges are Conventional PCI devices, so INTERFACE_CONVENTIONAL_PCI_DEVICE is added only to the subtypes that are actually Conventional PCI: * dec-21154-p2p-bridge * i82801b11-bridge * pbm-bridge * pci-bridge The direct subtypes of base-pci-bridge not touched by this patch are: * xilinx-pcie-root: Already marked as PCIe-only. * pcie-pci-bridge: Already marked as PCIe-only. * pcie-port: all non-abstract subtypes of pcie-port are already marked as PCIe-only devices. 3) megasas-base Not all megasas devices are Conventional PCI devices, so the interface names are added to the subclasses registered by megasas_register_types(), according to information in the megasas_devices[] array. "megasas-gen2" already implements INTERFACE_PCIE_DEVICE, so add INTERFACE_CONVENTIONAL_PCI_DEVICE only to "megasas". Acked-by: Alberto Garcia <berto@igalia.com> Acked-by: John Snow <jsnow@redhat.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-15fw_cfg: add write callbackMarc-André Lureau1-1/+1
Reintroduce the write callback that was removed when write support was removed in commit 023e3148567ac898c7258138f8e86c3c2bb40d07. Contrary to the previous callback implementation, the write_cb callback is called whenever a write happened, so handlers must be ready to handle partial write as necessary. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-19Convert multi-line fprintf() to warn_report()Alistair Francis1-4/+3
Convert all the multi-line uses of fprintf(stderr, "warning:"..."\n"... to use warn_report() instead. This helps standardise on a single method of printing warnings to the user. All of the warnings were changed using these commands: find ./* -type f -exec sed -i \ 'N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + Indentation fixed up manually afterwards. Some of the lines were manually edited to reduce the line length to below 80 charecters. Some of the lines with newlines in the middle of the string were also manually edit to avoid checkpatch errrors. The #include lines were manually updated to allow the code to compile. Several of the warning messages can be improved after this patch, to keep this patch mechanical this has been moved into a later patch. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Anthony Perard <anthony.perard@citrix.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Alexander Graf <agraf@suse.de> Cc: Jason Wang <jasowang@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <5def63849ca8f551630c6f2b45bcb1c482f765a6.1505158760.git.alistair.francis@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19Convert single line fprintf(.../n) to warn_report()Alistair Francis1-1/+2
Convert all the single line uses of fprintf(stderr, "warning:"..."\n"... to use warn_report() instead. This helps standardise on a single method of printing warnings to the user. All of the warnings were changed using this command: find ./* -type f -exec sed -i \ 's|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig' \ {} + Some of the lines were manually edited to reduce the line length to below 80 charecters. The #include lines were manually updated to allow the code to compile. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael Roth <mdroth@linux.vnet.ibm.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> [mips] Message-Id: <ae8f8a7f0a88ded61743dff2adade21f8122a9e7.1505158760.git.alistair.francis@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-08vmgenid: replace x-write-pointer-available hackMarc-André Lureau2-8/+11
This compat property sole function is to prevent the device from being instantiated. Instead of requiring an extra compat property, check if fw_cfg has DMA enabled. fw_cfg is a built-in device that is initialized very early by the machine init code. We have at least one other device that also assumes fw_cfg_find() can be safely used on realize: pvpanic. This has the additional benefit of handling other cases properly, like: $ qemu-system-x86_64 -device vmgenid -machine none qemu-system-x86_64: -device vmgenid: vmgenid requires DMA write support in fw_cfg, which this machine type does not provide $ qemu-system-x86_64 -device vmgenid -machine pc-i440fx-2.9 -global fw_cfg.dma_enabled=off qemu-system-x86_64: -device vmgenid: vmgenid requires DMA write support in fw_cfg, which this machine type does not provide $ qemu-system-x86_64 -device vmgenid -machine pc-i440fx-2.6 -global fw_cfg.dma_enabled=on [boots normally] Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Ben Warren <ben@skyportsystems.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08acpi/vmgenid: change device category to miscYoni Bettan1-0/+1
Moved vmgenid from uncategorized to misc category in QEMU help menu Signed-off-by: Yoni Bettan <ybettan@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08Revert "ACPI: don't call acpi_pcihp_device_plug_cb on xen"Anthony PERARD1-8/+3
This reverts commit 153eba4726dfa1bdfc31d1fe973b2a61b9035492. This patch prevents PCI passthrough hotplug on Xen. Even if the Xen tool stack prepares its own ACPI tables, we still rely on QEMU for hotplug ACPI notifications. The original issue is fixed by the two previous patch: hw/acpi: Limit hotplug to root bus on legacy mode hw/acpi: Move acpi_set_pci_info to pcihp Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08hw/acpi: Move acpi_set_pci_info to pcihpAnthony PERARD1-0/+38
HW part of ACPI PCI hotplug in QEMU depends on ACPI_PCIHP_PROP_BSEL being set on a PCI bus that supports ACPI hotplug. It should work regardless of the source of ACPI tables (QEMU generator/legacy SeaBIOS/Xen). So move ACPI_PCIHP_PROP_BSEL initialization into HW ACPI implementation part from QEMU's ACPI table generator. To do PCI passthrough with Xen, the property ACPI_PCIHP_PROP_BSEL needs to be set, but this was done only when ACPI tables are built which is not needed for a Xen guest. The need for the property starts with commit "pc: pcihp: avoid adding ACPI_PCIHP_PROP_BSEL twice" (f0c9d64a68b776374ec4732424a3e27753ce37b6). Adding find_i440fx into stubs so that mips-softmmu target can be built. Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08hw/acpi: Limit hotplug to root bus on legacy modeAnthony PERARD1-1/+1
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-07-31docs: fix broken paths to docs/devel/tracing.txtPhilippe Mathieu-Daudé1-1/+1
With the move of some docs/ to docs/devel/ on ac06724a71, no references were updated. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-07-04include/exec/poison: Mark CONFIG_KVM as poisoned, tooThomas Huth1-1/+0
CONFIG_KVM is only defined for target-specific code, so nobody should use it by accident in common code. To avoid such subtle bugs, CONFIG_KVM is now marked as poisoned in common code. The header include/sysemu/kvm.h is somewhat special since it is included all over the place from common code, too, so we need some extra logic via "#ifdef NEED_CPU_H" here to make sure that we can compile all files without problems. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1498454578-18709-4-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2024-11-03 15:37:22 +0000