aboutsummaryrefslogtreecommitdiff
path: root/hw/acpi
AgeCommit message (Collapse)AuthorFilesLines
2021-09-04hw/acpi: use existing references to pci device struct within functionsAni Sinha1-3/+3
There is no need to use fresh typecasts to get references to pci device structs when there is an existing reference to pci device struct. Use existing reference. Minor cleanup. Signed-off-by: Ani Sinha <ani@anisinha.ca> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210825031949.919376-3-ani@anisinha.ca> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-09-04hw/acpi: refactor acpi hp modules so that targets can just use what they needAni Sinha6-4/+160
Currently various acpi hotplug modules like cpu hotplug, memory hotplug, pci hotplug, nvdimm hotplug are all pulled in when CONFIG_ACPI_X86 is turned on. This brings in support for whole lot of subsystems that some targets like mips does not need. They are added just to satisfy symbol dependencies. This is ugly and should be avoided. Targets should be able to pull in just what they need and no more. For example, mips only needs support for PIIX4 and does not need acpi pci hotplug support or cpu hotplug support or memory hotplug support etc. This change is an effort to clean this up. In this change, new config variables are added for various acpi hotplug subsystems. Targets like mips can only enable PIIX4 support and not the rest of all the other modules which were being previously pulled in as a part of CONFIG_ACPI_X86. Function stubs make sure that symbols which piix4 needs but are not required by mips (for example, symbols specific to pci hotplug etc) are available to satisfy the dependencies. Currently, this change only addresses issues with mips malta targets. In future we might be able to clean up other targets which are similarly pulling in lot of unnecessary hotplug modules by enabling ACPI_X86. This change should also address issues such as the following: https://gitlab.com/qemu-project/qemu/-/issues/221 https://gitlab.com/qemu-project/qemu/-/issues/193 Signed-off-by: Ani Sinha <ani@anisinha.ca> Message-Id: <20210812071409.492299-1-ani@anisinha.ca> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-09-04hw/acpi: define PIIX4 acpi pci hotplug property strings at a single placeAni Sinha2-3/+3
Now that we have "acpi-pci-hotplug-with-bridge-support" PIIX4 PM property being used for both q35 and i440fx machine types, it is better that we defined this property string at a single place within a header file like other PIIX4 properties. We can then use this single definition at all the places that needs it instead of duplicating the string everywhere. While at it, this change also adds a definition for "acpi-root-pci-hotplug" PIIX4 PM property and uses this definition at all places that were formally using the string value. Signed-off-by: Ani Sinha <ani@anisinha.ca> Message-Id: <20210816083214.105740-1-ani@anisinha.ca> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-07-20hw/acpi/Kconfig: Add missing Kconfig dependencies (build error)Philippe Mathieu-Daudé1-0/+4
The 'microvm' machine misses various dependencies: /usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `acpi_setup_microvm': hw/i386/acpi-microvm.c:247: undefined reference to `acpi_build_tables_init' /usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `acpi_build_microvm': hw/i386/acpi-microvm.c:192: undefined reference to `bios_linker_loader_alloc' /usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `build_dsdt_microvm': hw/i386/acpi-microvm.c:121: undefined reference to `init_aml_allocator' /usr/bin/ld: hw/i386/acpi-microvm.c:124: undefined reference to `acpi_data_push' /usr/bin/ld: hw/i386/acpi-microvm.c:126: undefined reference to `aml_scope' /usr/bin/ld: hw/i386/acpi-microvm.c:129: undefined reference to `build_ged_aml' /usr/bin/ld: hw/i386/acpi-microvm.c:131: undefined reference to `acpi_dsdt_add_power_button' /usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `acpi_dsdt_add_virtio': hw/i386/acpi-microvm.c:77: undefined reference to `aml_string' /usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `build_dsdt_microvm': hw/i386/acpi-microvm.c:138: undefined reference to `aml_scope' /usr/bin/ld: hw/i386/acpi-microvm.c:149: undefined reference to `build_header' /usr/bin/ld: hw/i386/acpi-microvm.c:152: undefined reference to `free_aml_allocator' /usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `acpi_build_microvm': hw/i386/acpi-microvm.c:202: undefined reference to `acpi_add_table' /usr/bin/ld: hw/i386/acpi-microvm.c:203: undefined reference to `build_fadt' /usr/bin/ld: hw/i386/acpi-microvm.c:206: undefined reference to `acpi_add_table' /usr/bin/ld: hw/i386/acpi-microvm.c:207: undefined reference to `acpi_build_madt' /usr/bin/ld: hw/i386/acpi-microvm.c:212: undefined reference to `build_xsdt' /usr/bin/ld: hw/i386/acpi-microvm.c:224: undefined reference to `build_rsdp' /usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `acpi_setup_microvm': hw/i386/acpi-microvm.c:251: undefined reference to `acpi_add_rom_blob' /usr/bin/ld: hw/i386/acpi-microvm.c:253: undefined reference to `acpi_add_rom_blob' /usr/bin/ld: hw/i386/acpi-microvm.c:255: undefined reference to `acpi_add_rom_blob' /usr/bin/ld: hw/i386/acpi-microvm.c:258: undefined reference to `acpi_build_tables_cleanup' /usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `acpi_dsdt_add_pci': hw/i386/acpi-microvm.c:105: undefined reference to `acpi_dsdt_add_gpex' collect2: error: ld returned 1 exit status ninja: build stopped: subcommand failed. Update the ACPI_HW_REDUCED symbol to select ACPI_MEMORY_HOTPLUG / ACPI_NVDIMM / ACPI. Fixes: 8045df14bcc ("microvm/acpi: add minimal acpi support") Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20210616204328.2611406-23-philmd@redhat.com>
2021-07-20hw/acpi: Do not restrict ACPI core routines to x86 architecturePhilippe Mathieu-Daudé1-1/+2
ACPI core routines (in core.c) are not really x86-specific. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20210616204328.2611406-21-philmd@redhat.com>
2021-07-16hw/acpi/ich9: Set ACPI PCI hot-plug as default on Q35Julia Suvorova1-1/+1
Q35 has three different types of PCI devices hot-plug: PCIe Native, SHPC Native and ACPI hot-plug. This patch changes the default choice for cold-plugged bridges from PCIe Native to ACPI Hot-plug with ability to use SHPC and PCIe Native for hot-plugged bridges. This is a list of the PCIe Native hot-plug issues that led to this change: * no racy behavior during boot (see 110c477c2ed) * no delay during deleting - after the actual power off software must wait at least 1 second before indicating about it. This case is quite important for users, it even has its own bug: https://bugzilla.redhat.com/show_bug.cgi?id=1594168 * no timer-based behavior - in addition to the previous example, the attention button has a 5-second waiting period, during which the operation can be canceled with a second press. While this looks fine for manual button control, automation will result in the need to queue or drop events, and the software receiving events in all sort of unspecified combinations of attention/power indicator states, which is racy and uppredictable. * fixes: * https://bugzilla.redhat.com/show_bug.cgi?id=1752465 * https://bugzilla.redhat.com/show_bug.cgi?id=1690256 To return to PCIe Native hot-plug: -global ICH9-LPC.acpi-pci-hotplug-with-bridge-support=off Known issue: older linux guests need the following flag to allow hotplugged pci express devices to use io: -device pcie-root-port,io-reserve=4096. io is unusual for pci express so this seems minor. We'll fix this by a follow up patch. Signed-off-by: Julia Suvorova <jusual@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20210713004205.775386-6-jusual@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2021-07-16hw/pci/pcie: Do not set HPC flag if acpihp is usedJulia Suvorova1-0/+8
Instead of changing the hot-plug type in _OSC register, do not set the 'Hot-Plug Capable' flag. This way guest will choose ACPI hot-plug if it is preferred and leave the option to use SHPC with pcie-pci-bridge. The ability to control hot-plug for each downstream port is retained, while 'hotplug=off' on the port means all hot-plug types are disabled. Signed-off-by: Julia Suvorova <jusual@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20210713004205.775386-4-jusual@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-07-16hw/acpi/ich9: Enable ACPI PCI hot-plugJulia Suvorova3-2/+86
Add acpi_pcihp to ich9_pm as part of 'acpi-pci-hotplug-with-bridge-support' option. Set default to false. Signed-off-by: Julia Suvorova <jusual@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20210713004205.775386-3-jusual@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2021-07-16hw/i386/acpi-build: Add ACPI PCI hot-plug methods to Q35Julia Suvorova2-4/+6
Implement notifications and gpe to support q35 ACPI PCI hot-plug. Use 0xcc4 - 0xcd7 range for 'acpi-pci-hotplug' io ports. Signed-off-by: Julia Suvorova <jusual@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Message-Id: <20210713004205.775386-2-jusual@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2021-07-03acpi/ged: fix reset causeGerd Hoffmann1-1/+1
Reset requests should use SHUTDOWN_CAUSE_GUEST_RESET not SHUTDOWN_CAUSE_GUEST_SHUTDOWN. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20210624110057.2398779-1-kraxel@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-06-21hw/acpi: Provide function acpi_ghes_present()Peter Maydell2-0/+22
Allow code elsewhere in the system to check whether the ACPI GHES table is present, so it can determine whether it is OK to try to record an error by calling acpi_ghes_record_errors(). (We don't need to migrate the new 'present' field in AcpiGhesState, because it is set once at system initialization and doesn't change.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Dongjiu Geng <gengdongjiu1@gmail.com> Message-id: 20210603171259.27962-3-peter.maydell@linaro.org
2021-06-21hw/acpi: Provide stub version of acpi_ghes_record_errors()Peter Maydell2-3/+20
Generic code in target/arm wants to call acpi_ghes_record_errors(); provide a stub version so that we don't fail to link when CONFIG_ACPI_APEI is not set. This requires us to add a new ghes-stub.c file to contain it and the meson.build mechanics to use it when appropriate. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Dongjiu Geng <gengdongjiu1@gmail.com> Message-id: 20210603171259.27962-2-peter.maydell@linaro.org
2021-06-15acpi: Eliminate all TPM related code if CONFIG_TPM is not setStefan Berger1-0/+2
Cc: M: Michael S. Tsirkin <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210614191335.1968807-4-stefanb@linux.ibm.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2021-06-02docs: fix references to docs/specs/tpm.rstStefano Garzarella1-1/+1
Commit 6e8a3ff6ed ("docs/specs/tpm: reST-ify TPM documentation") converted docs/specs/tpm.txt to docs/specs/tpm.rst. We still have several references to the old file, so let's fix them with the following command: sed -i s/tpm.txt/tpm.rst/ $(git grep -l docs/specs/tpm.txt) Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210517151702.109066-5-sgarzare@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-06-02docs: fix references to docs/devel/tracing.rstStefano Garzarella1-1/+1
Commit e50caf4a5c ("tracing: convert documentation to rST") converted docs/devel/tracing.txt to docs/devel/tracing.rst. We still have several references to the old file, so let's fix them with the following command: sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt) Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210517151702.109066-2-sgarzare@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-05-16Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell1-6/+9
pc,pci,virtio: bugfixes, improvements Fixes all over the place. Faster boot for virtio. ioeventfd support for mmio. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri 14 May 2021 15:27:13 BST # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: Fix build with 64 bits time_t vhost-vdpa: Make vhost_vdpa_get_device_id() static hw/virtio: enable ioeventfd configuring for mmio hw/smbios: support for type 41 (onboard devices extended information) checkpatch: Fix use of uninitialized value virtio-scsi: Configure all host notifiers in a single MR transaction virtio-scsi: Set host notifiers and callbacks separately virtio-blk: Configure all host notifiers in a single MR transaction virtio-blk: Fix rollback path in virtio_blk_data_plane_start() pc-dimm: remove unnecessary get_vmstate_memory_region() method amd_iommu: fix wrong MMIO operations virtio-net: Constify VirtIOFeature feature_sizes[] virtio-blk: Constify VirtIOFeature feature_sizes[] hw/virtio: Pass virtio_feature_get_config_size() a const argument x86: acpi: use offset instead of pointer when using build_header() amd_iommu: Fix pte_override_page_mask() Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/arm/virt.c
2021-05-04x86: acpi: use offset instead of pointer when using build_header()Igor Mammedov1-6/+9
Do the same as in commit (4d027afeb3a97 Virt: ACPI: fix qemu assert due to re-assigned table data address) for remaining tables that happen to use saved at the beginning pointer to build header to avoid assert when table_data is relocated due to implicit re-size. In this case user is trying to start Windows 10 and getting assert at hw/acpi/bios-linker-loader.c:239: bios_linker_loader_add_checksum: Assertion `start_offset < file->blob->len' failed. Fixes: https://bugs.launchpad.net/bugs/1923497 Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20210414084356.3792113-1-imammedo@redhat.com> Cc: mst@redhat.com, qemu-stable@nongnu.org Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-05-02Do not include exec/address-spaces.h if it's not really necessaryThomas Huth4-4/+0
Stop including exec/address-spaces.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-5-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02Do not include hw/boards.h if it's not really necessaryThomas Huth2-2/+0
Stop including hw/boards.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-3-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-04-01acpi/piix4: reinitialize acpi PM device on resetIsaku Yamahata1-0/+7
Commit 6be8cf56bc8b made sure that SCI is enabled in PM1.CNT on reset in acpi_only mode by modifying acpi_pm1_cnt_reset() and that worked for q35 as expected. The function was introduced by commit eaba51c573a (acpi, acpi_piix, vt82c686: factor out PM1_CNT logic) that forgot to actually call it at piix4 reset time and as result SCI_EN wasn't set as was expected by 6be8cf56bc8b in acpi_only mode. So Windows crashes when it notices that SCI_EN is not set and FADT is not providing information about how to enable it anymore. Reproducer: qemu-system-x86_64 -enable-kvm -M pc-i440fx-6.0,smm=off -cdrom any_windows_10x64.iso Fix it by calling acpi_pm1_cnt_reset() at piix4 reset time. Occasionally this patch adds reset acpi PM related registers on piix4 reset time and de-assert sci. piix4_pm_realize() initializes acpi pm tmr, evt, cnt and gpe. Reset them on device reset. pm_reset() in ich9.c correctly calls corresponding reset functions. Fixes: 6be8cf56bc8b (acpi/core: always set SCI_EN when SMM isn't supported) Reported-by: Reinoud Zandijk <reinoud@NetBSD.org> Co-developed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com> Message-Id: <8a5bbd19727045ec863523830078dd4ca63f6a9a.1616532563.git.isaku.yamahata@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-03-22acpi: Set proper maximum size for "etc/acpi/rsdp" blobDavid Hildenbrand1-1/+6
Let's also set a maximum size for "etc/acpi/rsdp", so the maximum size doesn't get implicitly set based on the initial table size. In my experiments, the table size was in the range of 22 bytes, so a single page (== what we used until now) seems to be good enough. Now that we have defined maximum sizes for all currently used table types, let's assert that we catch usage with new tables that need a proper maximum size definition. Also assert that our initial size does not exceed the maximum size; while qemu_ram_alloc_internal() properly asserts that the initial RAMBlock size is <= its maximum size, the result might differ when the host page size is bigger than 4k. Suggested-by: Laszlo Ersek <lersek@redhat.com> Cc: Alistair Francis <alistair.francis@xilinx.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Shannon Zhao <shannon.zhaosl@gmail.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Laszlo Ersek <lersek@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210304105554.121674-5-david@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-03-22acpi: Move maximum size logic into acpi_add_rom_blob()David Hildenbrand1-2/+10
We want to have safety margins for all tables based on the table type. Let's move the maximum size logic into acpi_add_rom_blob() and make it dependent on the table name, so we don't have to replicate for each and every instance that creates such tables. Suggested-by: Laszlo Ersek <lersek@redhat.com> Cc: Alistair Francis <alistair.francis@xilinx.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Shannon Zhao <shannon.zhaosl@gmail.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Laszlo Ersek <lersek@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210304105554.121674-4-david@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-03-22acpi: add aml_to_decimalstring() and aml_call6() helpersIgor Mammedov1-0/+28
it will be used by follow up patches Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20210315180102.3008391-5-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-03-22pci: acpi: ensure that acpi-index is uniqueIgor Mammedov1-0/+46
it helps to avoid device naming conflicts when guest OS is configured to use acpi-index for naming. Spec ialso says so: PCI Firmware Specification Revision 3.2 4.6.7. _DSM for Naming a PCI or PCI Express Device Under Operating Systems " Instance number must be unique under \_SB scope. This instance number does not have to be sequential in a given system configuration. " Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20210315180102.3008391-4-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-03-22pci: introduce acpi-index property for PCI deviceIgor Mammedov4-4/+60
In x86/ACPI world, linux distros are using predictable network interface naming since systemd v197. Which on QEMU based VMs results into path based naming scheme, that names network interfaces based on PCI topology. With itm on has to plug NIC in exactly the same bus/slot, which was used when disk image was first provisioned/configured or one risks to loose network configuration due to NIC being renamed to actually used topology. That also restricts freedom to reshape PCI configuration of VM without need to reconfigure used guest image. systemd also offers "onboard" naming scheme which is preferred over PCI slot/topology one, provided that firmware implements: " PCI Firmware Specification 3.1 4.6.7. DSM for Naming a PCI or PCI Express Device Under Operating Systems " that allows to assign user defined index to PCI device, which systemd will use to name NIC. For example, using -device e1000,acpi-index=100 guest will rename NIC to 'eno100', where 'eno' is default prefix for "onboard" naming scheme. This doesn't require any advance configuration on guest side to com in effect at 'onboard' scheme takes priority over path based naming. Hope is that 'acpi-index' it will be easier to consume by management layer, compared to forcing specific PCI topology and/or having several disk image templates for different topologies and will help to simplify process of spawning VM from the same template without need to reconfigure guest NIC. This patch adds, 'acpi-index'* property and wires up a 32bit register on top of pci hotplug register block to pass index value to AML code at runtime. Following patch will add corresponding _DSM code and wire it up to PCI devices described in ACPI. *) name comes from linux kernel terminology Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20210315180102.3008391-3-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-02-23acpi/core: always set SCI_EN when SMM isn't supportedIsaku Yamahata3-3/+13
If SMM is not supported, ACPI fixed hardware doesn't support legacy-mode. ACPI-only platform. Where SCI_EN in PM1_CNT register is always set. The bit tells OS legacy mode(SCI_EN cleared) or ACPI mode(SCI_EN set). With the next patch (setting fadt.smi_cmd = 0 when smm isn't enabled), guest Linux tries to switch to ACPI mode, finds smi_cmd = 0, and then fails to initialize acpi subsystem. This patch proactively fixes it. This patch changes guest ABI. To keep compatibility, use "smm-compat" introduced by earlier patch. If the property is true, disable new behavior. ACPI spec 4.8.10.1 PM1 Event Grouping PM1 Eanble Registers > For ACPI-only platforms (where SCI_EN is always set) Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com> Message-Id: <500f62081626997e46f96377393d3662211763a8.1613615732.git.isaku.yamahata@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-02-23ich9, piix4: add property, smm-compat, to keep compatibility of SMMIsaku Yamahata1-0/+2
The following patch will introduce incompatible behavior of SMM. Introduce a property to keep the old behavior for compatibility. To enable smm compat, use "-global ICH9-LPC.smm-compat=on" or "-global PIIX4_PM.smm-compat=on" Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com> Message-Id: <47254ae0b8c6cc6945422978b6b2af2d213ef891.1613615732.git.isaku.yamahata@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2021-02-05acpi: Permit OEM ID and OEM table ID fields to be changedMarian Postevca7-33/+36
Qemu's ACPI table generation sets the fields OEM ID and OEM table ID to "BOCHS " and "BXPCxxxx" where "xxxx" is replaced by the ACPI table name. Some games like Red Dead Redemption 2 seem to check the ACPI OEM ID and OEM table ID for the strings "BOCHS" and "BXPC" and if they are found, the game crashes(this may be an intentional detection mechanism to prevent playing the game in a virtualized environment). This patch allows you to override these default values. The feature can be used in this manner: qemu -machine oem-id=ABCDEF,oem-table-id=GHIJKLMN The oem-id string can be up to 6 bytes in size, and the oem-table-id string can be up to 8 bytes in size. If the string are smaller than their respective sizes they will be padded with space. If either of these parameters is not set, the current default values will be used for the one missing. Note that the the OEM Table ID field will not be extended with the name of the table, but will use either the default name or the user provided one. This does not affect the -acpitable option (for user-defined ACPI tables), which has precedence over -machine option. Signed-off-by: Marian Postevca <posteuca@mutex.one> Message-Id: <20210119003216.17637-3-posteuca@mutex.one> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-01-28qapi: Use QAPI_LIST_APPEND in trivial casesEric Blake2-10/+5
The easiest spots to use QAPI_LIST_APPEND are where we already have an obvious pointer to the tail of a list. While at it, consistently use the variable name 'tail' for that purpose. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210113221013.390592-5-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2021-01-17acpi: Add addr offset in build_crsJiahui Cen1-8/+10
AML needs Address Translation offset to describe how a bridge translates addresses accross the bridge when using an address descriptor, and especially on ARM, the translation offset of pio resource is usually non zero. Therefore, it's necessary to pass offset for pio, mmio32, mmio64 and bus number into build_crs. Acked-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Jiahui Cen <cenjiahui@huawei.com> Message-Id: <20210114100643.10617-4-cenjiahui@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-18qdev: Move softmmu properties to qdev-properties-system.hEduardo Habkost1-0/+1
Move the property types and property macros implemented in qdev-properties-system.c to a new qdev-properties-system.h header. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20201211220529.2290218-16-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-12-09x86: acpi: let the firmware handle pending "CPU remove" events in SMMIgor Mammedov1-2/+12
if firmware and QEMU negotiated CPU hotunplug support, generate _EJ0 method so that it will mark CPU for removal by firmware and pass control to it by triggering SMI. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20201207140739.3829993-6-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-09acpi: cpuhp: introduce 'firmware performs eject' status/control bitsIgor Mammedov2-1/+13
Adds bit #4 to status/control field of CPU hotplug MMIO interface. New bit will be used OSPM to mark CPUs as pending for removal by firmware, when it calls _EJ0 method on CPU device node. Later on, when firmware sees this bit set, it will perform CPU eject which will clear bit #4 as well. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20201207140739.3829993-3-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08acpi: Extract crs build form acpi_build.cYubo Miao1-0/+285
Extract crs build form acpi_build.c, the function could also be used to build the crs for pxbs for arm. The resources are composed by two parts: 1. The bar space of pci-bridge/pcie-root-ports 2. The resources needed by devices behind PXBs. The base and limit of memory/io are obtained from the config via two APIs: pci_bridge_get_base and pci_bridge_get_limit Signed-off-by: Yubo Miao <miaoyubo@huawei.com> Signed-off-by: Jiahui Cen <cenjiahui@huawei.com> Message-Id: <20201119014841.7298-5-cenjiahui@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-11-15nomaintainer: Fix Lesser GPL version numberChetan Pant6-6/+6
There is no "version 2" of the "Lesser" General Public License. It is either "GPL version 2.0" or "Lesser GPL version 2.1". This patch replaces all occurrences of "Lesser GPL version 2" with "Lesser GPL version 2.1" in comment section. This patch contains all the files, whose maintainer I could not get from ‘get_maintainer.pl’ script. Signed-off-by: Chetan Pant <chetan4windows@gmail.com> Message-Id: <20201023124424.20177-1-chetan4windows@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> [thuth: Adapted exec.c and qdev-monitor.c to new location] Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-11-15nvdimm: Fix Lesser GPL version numberChetan Pant1-1/+1
There is no "version 2" of the "Lesser" General Public License. It is either "GPL version 2.0" or "Lesser GPL version 2.1". This patch replaces all occurrences of "Lesser GPL version 2" with "Lesser GPL version 2.1" in comment section. Signed-off-by: Chetan Pant <chetan4windows@gmail.com> Message-Id: <20201023123749.19941-1-chetan4windows@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-11-12ACPI: Avoid infinite recursion when dump-vmstatePeng Liang1-1/+11
There is a field with vmstate_ghes_state as vmsd in vmstate_ghes_state, which will lead to infinite recursion in dump_vmstate_vmsd. Fixes: a08a64627b ("ACPI: Record the Generic Error Status Block address") Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Peng Liang <liangpeng10@huawei.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20201112020638.874515-1-liangpeng10@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-03hw/acpi : add spaces around operatorXinhao Zhang1-1/+1
Fix code style. Operator needs spaces both sides. Signed-off-by: Xinhao Zhang <zhangxinhao1@huawei.com> Signed-off-by: Kai Deng <dengkai1@huawei.com> Message-Id: <20201103102634.273021-3-zhangxinhao1@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-11-03hw/acpi : add space before the open parenthesis '('Xinhao Zhang1-1/+1
Fix code style. Space required before the open parenthesis '('. Signed-off-by: Xinhao Zhang <zhangxinhao1@huawei.com> Signed-off-by: Kai Deng <dengkai1@huawei.com> Message-Id: <20201103102634.273021-2-zhangxinhao1@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-11-03hw/acpi : Don't use '#' flag of printf formatXinhao Zhang1-10/+10
Fix code style. Don't use '#' flag of printf format ('%#') in format strings, use '0x' prefix instead Signed-off-by: Xinhao Zhang <zhangxinhao1@huawei.com> Signed-off-by: Kai Deng <dengkai1@huawei.com> Message-Id: <20201103102634.273021-1-zhangxinhao1@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-10-21acpi: add aml builder stubsGerd Hoffmann1-0/+14
Add stubs for aml_interrupt and aml_memory32_fixed, these will be needed by followup patches, Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20201020074844.5304-2-kraxel@redhat.com
2020-10-13hw/acpi/piix4: Rename piix4_pm_add_propeties() to piix4_pm_add_properties()Greg Kurz1-2/+2
Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Message-Id: <160165476743.57452.2128307974125615413.stgit@bahia.lan> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-29qapi: Extract ACPI commands to 'acpi.json'Philippe Mathieu-Daudé3-3/+3
Only qemu-system-FOO and qemu-storage-daemon provide QMP monitors, therefore such declarations and definitions are irrelevant for user-mode emulation. Extracting the ACPI commands to their own schema reduces the size of the qapi-misc* headers generated, and pulls less QAPI-generated code into user-mode. Suggested-by: Markus Armbruster <armbru@redhat.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200913195348.1064154-8-philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29qapi: Restrict device memory commands to machine codePhilippe Mathieu-Daudé1-0/+1
Only qemu-system-FOO and qemu-storage-daemon provide QMP monitors, therefore such declarations and definitions are irrelevant for user-mode emulation. Restricting the memory commands to machine.json pulls less QAPI-generated code into user-mode. Acked-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200913195348.1064154-7-philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29qapi: Restrict query-vm-generation-id command to machine codePhilippe Mathieu-Daudé1-1/+1
Only qemu-system-FOO and qemu-storage-daemon provide QMP monitors, therefore such declarations and definitions are irrelevant for user-mode emulation. Restricting the query-vm-generation-id command to machine.json pulls less QAPI-generated code into user-mode. Acked-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200913195348.1064154-5-philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29piix4: don't reserve hw resources when hotplug is off globallyAni Sinha1-2/+4
When acpi hotplug is turned off for both root pci bus as well as for pci bridges, we should not generate the related ACPI code for DSDT table or initialize related hw ports or reserve hw resources. This change makes sure all those operations are turned off in the case ACPI pci hotplug is off globally. In this change, we also make sure ACPI code for the PCNT method are only added when bsel is enabled for the corresponding pci bus or bridge hotplug is turned on. As q35 machines do not use bsel for it's pci buses at this point in time, this change affects DSDT acpi table for q35 machines as well. Therefore, we will also need to commit the updated golden master DSDT table acpi binary blobs as well. Following is the list of blobs which needs updating: tests/data/acpi/q35/DSDT tests/data/acpi/q35/DSDT.acpihmat tests/data/acpi/q35/DSDT.bridge tests/data/acpi/q35/DSDT.cphp tests/data/acpi/q35/DSDT.dimmpxm tests/data/acpi/q35/DSDT.ipmibt tests/data/acpi/q35/DSDT.memhp tests/data/acpi/q35/DSDT.mmio64 tests/data/acpi/q35/DSDT.numamem tests/data/acpi/q35/DSDT.tis These tables are updated in the following commit. Without the updated table blobs, the unit tests would fail with this patch. Signed-off-by: Ani Sinha <ani@anisinha.ca> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200918084111.15339-11-ani@anisinha.ca> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29Fix a gap where acpi_pcihp_find_hotplug_bus() returns a non-hotpluggable busAni Sinha1-0/+15
When ACPI hotplug for the root bus is disabled, the bsel property for that bus is not set. Please see the following commit: 3d7e78aa7777f ("Introduce a new flag for i440fx to disable PCI hotplug on the root bus"). As a result, when acpi_pcihp_find_hotplug_bus() is called with bsel set to 0, it may return the root bus. This can cause devices attached to the root bus to get hot-unplugged if the user issues the following set of commmands: outl 0xae10 0 outl 0xae08 your_slot Thanks to Julia for pointing this out here: https://www.mail-archive.com/qemu-devel@nongnu.org/msg734548.html In this patch, we fix the issue in this function by checking if the bus which is returned by the function is actually hotpluggable. If not, we simply return NULL. This avoids the scenario where we were returning a non-hotpluggable bus. Signed-off-by: Ani Sinha <ani@anisinha.ca> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200918084111.15339-5-ani@anisinha.ca> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29x68: acpi: trigger SMI before sending hotplug Notify event to OSPMIgor Mammedov1-27/+138
In case firmware has negotiated CPU hotplug SMI feature, generate AML to describe SMI IO port region and send SMI to firmware on each CPU hotplug SCI in case new CPUs were hotplugged. Since new CPUs can be hotplugged while CPU_SCAN_METHOD is running we can't send SMI before new CPUs are fetched from QEMU as it could cause sending Notify to a CPU that firmware hasn't seen yet. So fetch new CPUs into local cache first, then send SMI and after that send Notify events to cached CPUs. This should ensure that Notify is sent only to CPUs which were processed by firmware first. Any CPUs that were hotplugged after caching will be processed by the next CPU_SCAN_METHOD, when pending SCI is handled. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200923094650.1301166-10-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29acpi: add aml_land() and aml_break() primitivesIgor Mammedov1-0/+16
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200923094650.1301166-5-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29x86: cpuhp: refuse cpu hot-unplug request earlier if not supportedIgor Mammedov1-0/+12
CPU hot-unplug with SMM requires firmware participation to prevent guest crash (i.e. CPU can be removed only after OS _and_ firmware were prepared for the action). Previous patches introduced ICH9_LPC_SMI_F_CPU_HOT_UNPLUG_BIT feature bit, which is advertised by firmware when it has support for CPU hot-unplug. Use it to check if guest is able to handle unplug and make device_del fail gracefully if hot-unplug feature hasn't been negotiated. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200923094650.1301166-4-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.1 at 2025-01-03 22:13:59 +0000