aboutsummaryrefslogtreecommitdiff
path: root/hw/acpi/pcihp.c
AgeCommit message (Collapse)AuthorFilesLines
2017-06-20pcihp: use get_uint() for "bsel" propertyMarc-André Lureau1-3/+3
The property is defined with object_property_add_uint32_ptr() Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20170607163635.17635-24-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-06-20qapi: merge QInt and QFloat in QNumMarc-André Lureau1-1/+0
We would like to use a same QObject type to represent numbers, whether they are int, uint, or floats. Getters will allow some compatibility between the various types if the number fits other representations. Add a few more tests while at it. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20170607163635.17635-7-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [parse_stats_intervals() simplified a bit, comment in test_visitor_in_int_overflow() tidied up, suppress bogus warnings] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-03-01pc: pcihp: avoid adding ACPI_PCIHP_PROP_BSEL twiceIgor Mammedov1-11/+0
PCI hotplug for bridges was introduced only since 2.0 however acpi_set_bsel()->object_property_add_uint32_ptr(bus, ACPI_PCIHP_PROP_BSEL) didn't take in account that for legacy mode (1.7) when PCI hotplug for bridges is unavailable and ACPI_PCIHP_PROP_BSEL property the only bus "PCI.0' has been created earlier at acpi_pcihp_init() time. We managed to live with it only because of error rised by adding a duplicate property in acpi_set_bsel() has been ignored which resulted in useless leaking of just allocated (int)bus_bsel. Issue affects only 1.7 machine type as ACPI tables supported by QEMU were introduced at that time, but there wasn't PCI hotplug for bridges till the next release (2.0). Fix it by removing duplicate ACPI_PCIHP_PROP_BSEL intialization in acpi_pcihp_init() and doing it only in one place acpi_set_pci_info(). PS: do not ignore error returned by object_property_add_uint32_ptr() and abort QEMU since it's programming error which should be fixed instead of being ignored. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reported-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1470211497-116801-1-git-send-email-imammedo@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> [ Marc-André - Remove now unused ACPI_PCIHP_LEGACY_SIZE ] Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2016-06-07pc: use AcpiDeviceIfClass.send_event to issue GPE eventsIgor Mammedov1-6/+4
it reduces number of args passed in handlers by 1 and a number of used proxy wrappers saving ~20LOC. Also it allows to make cpu/mem hotplug code more universal as it would allow ARM to reuse it without rewrite by providing its own send_event callback to trigger events usiong GPIO instead of GPE as fixed hadrware ACPI model doen't have GPE at all. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster1-0/+1
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-29x86: Clean up includesPeter Maydell1-0/+1
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-11-git-send-email-peter.maydell@linaro.org
2015-06-03acpi: add acpi_send_gpe_event() to rise sci for hotplugZhu Guihua1-5/+2
Add a new API named acpi_send_gpe_event() to send hotplug SCI. This API can be used by pci, cpu and memory hotplug. This patch is rebased on master. Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2015-04-30range: remove useless inclusionsPaolo Bonzini1-1/+0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-04-28Convert (ffs(val) - 1) to ctz32(val)Stefan Hajnoczi1-1/+1
This commit was generated mechanically by coccinelle from the following semantic patch: @@ expression val; @@ - (ffs(val) - 1) + ctz32(val) The call sites have been audited to ensure the ffs(0) - 1 == -1 case never occurs (due to input validation, asserts, etc). Therefore we don't need to worry about the fact that ctz32(0) == 32. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1427124571-28598-5-git-send-email-stefanha@redhat.com Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-26pc: pcihp: expose MMIO base and len as propertiesIgor Mammedov1-6/+12
it will be used later to dynamically reserve MMIO region instead of manually punching holes in PCI0._CRS Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-08-25pcihp: fix possible array out of boundsGonglei1-1/+1
Prevent out-of-bounds array access on acpi_pcihp_pci_status. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2014-06-16savevm: Remove all the unneeded version_minimum_id_old (x86)Juan Quintela1-2/+1
After previous Peter patch, they are redundant. This way we don't assign them except when needed. Once there, there were lots of case where the ".fields" indentation was wrong: .fields = (VMStateField []) { and .fields = (VMStateField []) { Change all the combinations to: .fields = (VMStateField[]){ The biggest problem (appart from aesthetics) was that checkpatch complained when we copy&pasted the code from one place to another. Signed-off-by: Juan Quintela <quintela@redhat.com> Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2014-05-07acpi/pcihp.c: Rewrite acpi_pcihp_get_bsel using object_property_get_intKirill Batuzov1-8/+10
acpi_pcihp_get_bsel implements functionality of object_property_get_int for specific property named ACPI_PCIHP_PROP_BSEL, but fails to decrement object's reference counter properly. Rewriting it using generic object_property_get_int serves two purposes: reducing code duplication and fixing memory leak. Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-10acpi/piix4pm: convert ACPI PCI hotplug to use hotplug-handler APIIgor Mammedov1-12/+31
Split piix4_device_hotplug() into hotplug/unplug callbacks and register them as "hotplug-handler" interface implementation of PIIX4_PM device. Replace pci_bus_hotplug() wiring with setting link on PCI BUS "hotplug-handler" property to PIIX4_PM device. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-10qdev:pci: refactor PCIDevice to use generic "hotpluggable" propertyIgor Mammedov1-1/+2
Get rid of PCIDevice specific PCIDeviceClass.no_hotplug and use generic DeviceClass.hotpluggable field instead. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-05hw:piix4:acpi: reuse pcihp code for legacy PCI hotplugIgor Mammedov1-5/+18
reduces acpi PCI hotplug code duplication by ~200LOC Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-05pcihp: make pci_read() mmio calback compatible with legacy ACPI hotplugIgor Mammedov1-2/+5
due to recent change introduced by: "pcihp: reduce number of device check events" 'up' field is cleared right after it's read. This is incompatible with legacy BIOS ACPI code where PCNF ACPI method reads this field 32 times. To make pci_read mmio callback compatible with legacy 'up' behavior, pcihp code will need to know in which mode it runs add 'legacy_piix' field to AcpiPciHpState structure and alter register behavior accordingly. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-05pcihp: make PCI hotplug mmio handlers indifferent to PCI_HOTPLUG_ADDRIgor Mammedov1-12/+12
... removes dependency of mmio handler on PCI_HOTPLUG_ADDR. It will be needed in case of Q35 where base could be different. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-05pcihp: replace enable|disable_device() with onelinersIgor Mammedov1-12/+2
enable_device() and disable_device() functions aren't reused anywere, so replace them with respective oneliners at call sites. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-05pcihp: reduce number of device check eventsMichael S. Tsirkin1-16/+5
PIIX created a made-up value for the UP register since it was read by guest 32 times for each interrupt. There's no reason to do this for the new PCIHP: register is only read once for each interrupt, so clean up code by making read act as an interrupt acknowledgement: the new UP register clear on read. In this way we cut down the number of bus rescans by a factor of 32, and drop a bunch of code that's now unused. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26pcihp: generalization of piix4 acpiMichael S. Tsirkin1-0/+316
Add ACPI based PCI hotplug library with bridge hotplug support. Design - each bus gets assigned "bsel" property. - ACPI code writes this number to a new BNUM register, then uses existing UP/DOWN registers to probe slot status; to eject, write number to BNUM register, then slot into existing EJ. The interface is actually backwards-compatible with existing PIIX4 ACPI (though not migration compatible). This is split out from PIIX4 codebase so we can reuse it for Q35 as well. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.1 at 2024-11-03 04:19:14 +0000