aboutsummaryrefslogtreecommitdiff
path: root/hw/acpi.c
AgeCommit message (Collapse)AuthorFilesLines
2012-08-13qmp: add SUSPEND_DISK eventLuiz Capitulino1-0/+2
Emitted when the guest makes a request to enter S4 state. There are three possible ways of having this event, as described here: http://lists.gnu.org/archive/html/qemu-devel/2012-07/msg02307.html I've decided to add a new event and make it indepedent of SHUTDOWN. This means that the SHUTDOWN event will eventually follow the SUSPEND_DISK event. I've choosen this way because of two reasons: 1. Having an indepedent event makes it possible to query for its existence by using query-events 2. In the future, we may allow the user to change what QEMU should do as a result of the guest entering S4. So it's a good idea to keep both events separated Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-06-19Add PIIX4 properties to control PM system states.Gleb Natapov1-1/+4
This patch adds two things. First it allows QEMU to distinguish between regular powerdown and S4 powerdown. Later separate QMP notification will be added for S4 powerdown. Second it allows S3/S4 states to be disabled from QEMU command line. Some guests known to be broken with regards to power management, but allow to use it anyway. Using new properties management will be able to disable S3/S4 for such guests. Supported system state are passed to a firmware using new fw_cfg file. The file contains 6 byte array. Each byte represents one system state. If byte at offset X has its MSB set it means that system state X is supported and to enter it guest should use the value from lowest 3 bits. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-24suspend: make acpi timer wakeup the guest.Gerd Hoffmann1-0/+8
Make the acpi timer wake up the guest. Guests can enable/disable this via acpi too. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-24suspend: make rtc alarm wakeup the guest.Gerd Hoffmann1-0/+7
Make the rtc wake up the guest when the alarm fires. Add acpi windup to property support RTC_EN, so guests can enable and disable this. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-24suspend: switch acpi s3 to new infrastructure.Gerd Hoffmann1-11/+21
This patch switches pc s3 suspend over to the new infrastructure. The cmos_s3 qemu_irq is killed, the new notifier is used instead. The xen hack goes away with that too, the hypercall can simply be done in a notifier function now. This patch also makes the guest actually stay suspended instead of leaving suspend instantly, so it is useful for more than just testing whenever the suspend/resume cycle actually works. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-24acpi: add acpi_pm1_evt_write_enGerd Hoffmann1-0/+5
Do APCIREGS->pm1.evt.en updates using the new acpi_pm1_evt_write_en function, so the acpi code will see those updates. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-24acpi: don't pass overflow_time to acpi_pm1_evt_get_stsGerd Hoffmann1-3/+3
Pretty pointless, can easily be reached via ACPIREGS now. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-24acpi: add ACPIREGSGerd Hoffmann1-66/+64
All those acpi structs are not independent from each other. Various acpi functions expecting multiple acpi structs passed in are a clean indicator for that ;) So this patch bundles all acpi structs in the new ACPIREGS struct, then use it everythere pass around acpi state. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-13prepare for future GPLv2+ relicensingPaolo Bonzini1-0/+3
All files under GPLv2 will get GPLv2+ changes starting tomorrow. event_notifier.c and exec-obsolete.h were only ever touched by Red Hat employees and can be relicensed now. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-12-06fix typo: delete redundant semicolonDong Xu Wang1-1/+1
Double semicolons should be single. Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-09-03Use new macro QEMU_PACKED for packed structuresStefan Weil1-1/+1
Most changes were made using these commands: git grep -la '__attribute__((packed))'|xargs perl -pi -e 's/__attribute__\(\(packed\)\)/QEMU_PACKED/' git grep -la '__attribute__ ((packed))'|xargs perl -pi -e 's/__attribute__ \(\(packed\)\)/QEMU_PACKED/' git grep -la '__attribute__((__packed__))'|xargs perl -pi -e 's/__attribute__\(\(__packed__\)\)/QEMU_PACKED/' git grep -la '__attribute__ ((__packed__))'|xargs perl -pi -e 's/__attribute__ \(\(__packed__\)\)/QEMU_PACKED/' git grep -la '__attribute((packed))'|xargs perl -pi -e 's/__attribute\(\(packed\)\)/QEMU_PACKED/' Whitespace in linux-user/syscall_defs.h was fixed manually to avoid warnings from scripts/checkpatch.pl. Manual changes were also applied to hw/pc.c. I did not fix indentation with tabs in block/vvfat.c. The patch will show 4 errors with scripts/checkpatch.pl. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-20Use glib memory allocation and free functionsAnthony Liguori1-5/+5
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-30revamp acpitable parsing and allow to specify complete (headerful) tableMichael Tokarev1-126/+172
This patch almost rewrites acpi_table_add() function (but still leaves it using old get_param_value() interface). The result is that it's now possible to specify whole table (together with a header) in an external file, instead of just data portion, with a new file= parameter, but at the same time it's still possible to specify header fields as before. Now with the checkpatch.pl formatting fixes, thanks to Stefan Hajnoczi for suggestions, with changes from Isaku Yamahata, and with my further refinements. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Cc: Isaku Yamahata <yamahata@valinux.co.jp> Cc: John Baboval <john.baboval@virtualcomputer.com> Cc: Blue Swirl <blauwirbel@gmail.com> [yamahata@valinux.co.jp: fix compile error, comment fallthrough] Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-04-12fix acpi regressionWen Congyang1-1/+1
This bug is introduced by commit 23910d3f. Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-10acpi, acpi_piix: factor out GPE logicIsaku Yamahata1-0/+66
factor out ACPI GPE logic. Later it will be used by ICH9 ACPI. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-09acpi, acpi_piix, vt82c686: factor out PM1_CNT logicIsaku Yamahata1-0/+49
factor out ACPI PM1_CNT logic. This will be used by ich9 acpi. Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Huacai Chen <zltjiangshi@gmail.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-09acpi, acpi_piix, vt82c686: factor out PM1a EVT logicIsaku Yamahata1-0/+37
factor out ACPI PM1a EVT logic. Later this will be used by ich9 acpi. Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Huacai Chen <zltjiangshi@gmail.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-09acpi, acpi_piix, vt82c686: factor out PM_TMR logicIsaku Yamahata1-0/+45
factor out PM_TMR logic. Later This will be used by ich9 acpi. Also fixes the same bug in vt82c686.c that was fixed by the following commits. > commit 055479feab63607b8042bb8ebb2e0523f17cbc4e > Author: aliguori <aliguori@c046a42c-6fe2-441c-8c8c-71466251a162> > Date: Wed Jan 21 16:31:20 2009 +0000 > > Always return latest pmsts instead of the old one (Xiantao Zhang) > > It may lead to the issue when booting windows guests with acpi=1 > if return the old pmsts. > > Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com> > Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Huacai Chen <zltjiangshi@gmail.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-10-09acpi: Fix an infinite loop in acpi_table_addVincent Minet1-1/+1
Commit d729bb9a7700e364b1c5f9893d61f07a9e002bce has a typo, causing an infinite loop in acpi_table_add. Signed-off-by: Vincent Minet <vincent@vincent-minet.net> Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-30acpi: fix file size check with -acpitable.Isaku Yamahata1-9/+19
acpi table file can be modified during load so file size check should be more strict. pointer calculation should be after qemu_realloc(). not before realloc(). Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15Trim unnecessary includesBlue Swirl1-2/+0
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15acpi: split acpi.c into the common part and the piix4 part.Isaku Yamahata1-562/+0
Split acpi.c into the common part and the piix4 specific part. The common part will be used later. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15acpi: add acpi constants from linux header files and use them.Isaku Yamahata1-31/+25
add acpi constants from linux header files and replace the old constants with them. The acpi constants will be used by other file. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15acpi: split out apm register emulation from acpi.cIsaku Yamahata1-43/+18
Split out apm register emulation for acpi.c into apm.c. The apm emulation will be used later. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15acpi: split out piix4 smbus routines from acpi.c into pm_smbus.cIsaku Yamahata1-156/+8
Split out piix4 smbus routines from acpi.c into pm_smbus.c and use it. The split out smbus emulation will be used later. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-25x86: remove dead assignments, spotted by clang analyzerBlue Swirl1-3/+2
Value stored is never read. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-01Fix -enable-kvmAnthony Liguori1-1/+2
Make vl.o compiled per target and fix a thinko in hw/acpi.c. It's not trivial to make kvm.h consumable by compiled-once files. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-29Compile acpi only onceBlue Swirl1-10/+15
Use qemu_irqs to trigger CMOS S3 and SMI events. Avoid using kvm.h, which uses CPUState. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-12-23acpi: use range helper function.Isaku Yamahata1-1/+1
use range helper function in pm_write_config(). Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-12-02Fix qemu_free use in acpi.cJean-Christophe DUBOIS1-1/+1
acpi.c is using free() instead of qemu_free(). Fix it. Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27kill dead nic unplug code.Gerd Hoffmann1-3/+0
Cleanup on unplug happens via qdev->exit() callback now. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-15hotplug: safely iterate bus's sibling list while removing a deviceMark McLoughlin1-2/+2
Without this, I'm seeing a segfault when unpluging a NIC. Cc: Gerd Hoffmann <kraxel@redhat.com> Patchworks-ID: 35519 Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05pci: windup acpi-based hotplugGerd Hoffmann1-20/+21
Switch over acpi-based PCI hotplug for pc over to the new qdev-based pci hotplugging. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05vmstate: add version_id argument to post_loadJuan Quintela1-1/+1
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-11vmstate: rename run_after_load() -> post_load()Juan Quintela1-2/+2
This naming was used in kvm tree, and is easier to remember Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-11Unexport ticks_per_sec variable. Create get_ticks_per_sec() functionJuan Quintela1-4/+5
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27Port ACPI to VMStateJuan Quintela1-34/+21
This uses a run_after_load() function, and VMSTATE_PCI_DEVICE() It could be made smaller changing the type of pm_io_space_update() to return an int. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-09Use qemu_irq for system_powerdownBlue Swirl1-12/+16
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-16Update to a hopefully more future proof FSF addressBlue Swirl1-2/+1
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-06-29Revert "Introduce reset notifier order"Jan Kiszka1-1/+1
This reverts commit 8217606e6edb49591b4a6fd5a0d1229cebe470a9 (and updates later added users of qemu_register_reset), we solved the problem it originally addressed less invasively. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-22acpi.c: make qemu_system_device_hot_add piix independent.Isaku Yamahata1-2/+18
introruce piix4_device_hot_add() for piix4 specific code and make qemu_system_device_hot_add() generic. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-23Add common BusStatePaul Brook1-1/+1
Implement and use a common device bus state. The main side-effect is that creating a bus and attaching it to a parent device are no longer separate operations. For legacy code we allow a NULL parent, but that should go away eventually. Also tweak creation code to veriry theat a device in on the right bus. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-22Introduce reset notifier orderJan Kiszka1-1/+1
Add the parameter 'order' to qemu_register_reset and sort callbacks on registration. On system reset, callbacks with lower order will be invoked before those with higher order. Update all existing users to the standard order 0. Note: At least for x86, the existing users seem to assume that handlers are called in their registration order. Therefore, the patch preserves this property. If someone feels bored, (s)he could try to identify this dependency and express it properly on callback registration. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-03use PCI_HEADER_TYPE.Isaku Yamahata1-1/+1
use symbolic value instead of 0x0e and related value. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
2009-05-01Fix hw/acpi.c build w/ DEBUG enabledAlex Williamson1-6/+6
Trivial build warning/fixes when the local DEBUG define is enabled. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-04-17kvm: Apply SMM-already-initialized workaround on reset (Jan Kiszka)aliguori1-6/+11
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7136 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-27Remove some warnings and fix windows build.aliguori1-2/+2
Initialize some variables to make GCC happy and switch from using index to strchr. index is not available on Windows. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6653 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-27Allow additions of ACPI tables from command line (Gleb Natapov)aliguori1-0/+169
This is needed to dynamically add SLIC tables with Windows activation keys. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6650 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-16Generate PCI hotplug interrupt only if corespondent EN bit is set. (Gleb ↵aliguori1-4/+4
Natapov) Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6625 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-16Fix GPE registers read/write handling. (Gleb Natapov)aliguori1-12/+31
For STS register bit are cleared by writing 1 into it. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6624 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.1 at 2024-12-29 08:05:16 +0000