aboutsummaryrefslogtreecommitdiff
path: root/hmp.h
AgeCommit message (Collapse)AuthorFilesLines
2018-02-09Include qapi/qmp/qdict.h exactly where neededMarkus Armbruster1-1/+0
This cleanup makes the number of objects depending on qapi/qmp/qdict.h drop from 4550 (out of 4743) to 368 in my "build everything" tree. For qapi/qmp/qobject.h, the number drops from 4552 to 390. While there, separate #include from file comment with a blank line. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-13-armbru@redhat.com>
2018-02-09Drop superfluous includes of qapi-types.h and test-qapi-types.hMarkus Armbruster1-1/+0
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-4-armbru@redhat.com>
2018-01-26hmp: Add nbd_server_remove to mirror QMP commandEric Blake1-0/+1
Since everything else about the nbd-server-* QMP commands is accessible from HMP, we might as well make removing an export available as well. For now, I went with a bool flag rather than a mode string for choosing between safe (default) and hard modes. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20180125144557.25502-1-eblake@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-10-23migrate: HMP migate_continueDr. David Alan Gilbert1-0/+1
HMP equivalent to the just added migrate-continue Unpause a migrate paused at a given state. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-09-14hmp: introduce 'info memory_size_summary' commandVadim Galitsyn1-0/+1
Add 'info memory_size_summary' command which is a sibling of QMP command query-memory-size-summary. It provides the following memory information in bytes: * base-memory - size of "base" memory specified with command line option -m. * plugged-memory - amount of memory that was hot-plugged. If target does not have CONFIG_MEM_HOTPLUG enabled, no value is reported. Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Signed-off-by: Mohammed Gamal <mohammed.gamal@profitbricks.com> Signed-off-by: Eduardo Otubo <eduardo.otubo@profitbricks.com> Signed-off-by: Vadim Galitsyn <vadim.galitsyn@profitbricks.com> Reviewed-by: Eugene Crosser <evgenii.cherkashin@profitbricks.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: qemu-devel@nongnu.org Message-Id: <20170829153022.27004-4-vadim.galitsyn@profitbricks.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Fixed up comments from Igor's review
2017-07-14hmp: add hmp analogue for qmp-chardev-changeAnton Nefedov1-0/+1
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <1499342940-56739-11-git-send-email-anton.nefedov@virtuozzo.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-29Add chardev-send-break monitor commandStefan Fritsch1-0/+1
Sending a break on a serial console can be useful for debugging the guest. But not all chardev backends support sending breaks (only telnet and mux do). The chardev-send-break command allows to send a break even if using other backends. Signed-off-by: Stefan Fritsch <sf@sfritsch.de> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20170611074817.13621-1-sf@sfritsch.de> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Use 'send a break' in all 3 pieces of text as suggested by eblake
2017-05-17ramblock: add new hmp command "info ramblock"Peter Xu1-0/+1
To dump information about ramblocks. It looks like: (qemu) info ramblock Block Name PSize Offset Used Total /objects/mem 2 MiB 0x0000000000000000 0x0000000080000000 0x0000000080000000 vga.vram 4 KiB 0x0000000080060000 0x0000000001000000 0x0000000001000000 /rom@etc/acpi/tables 4 KiB 0x00000000810b0000 0x0000000000020000 0x0000000000200000 pc.bios 4 KiB 0x0000000080000000 0x0000000000040000 0x0000000000040000 0000:00:03.0/e1000.rom 4 KiB 0x0000000081070000 0x0000000000040000 0x0000000000040000 pc.rom 4 KiB 0x0000000080040000 0x0000000000020000 0x0000000000020000 0000:00:02.0/vga.rom 4 KiB 0x0000000081060000 0x0000000000010000 0x0000000000010000 /rom@etc/table-loader 4 KiB 0x00000000812b0000 0x0000000000001000 0x0000000000001000 /rom@etc/acpi/rsdp 4 KiB 0x00000000812b1000 0x0000000000001000 0x0000000000001000 Ramblock is something hidden internally in QEMU implementation, and this command should only be used by mostly QEMU developers on RAM stuff. It is not a command suitable for QMP interface. So only HMP interface is provided for it. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1494562661-9063-4-git-send-email-peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-05-04monitor: Move hmp_info_snapshots from savevm.c to hmp.cJuan Quintela1-0/+1
It only uses block/* functions, nothing from migration. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-05-04monitor: Move hmp_delvm from savevm.c to hmp.cJuan Quintela1-0/+1
It really uses block/* stuff, not migration one. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-05-04monitor: Move hmp_savevm from savevm.c to hmp.cJuan Quintela1-0/+1
It is a monitor command, and has nothing migration specific in it. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-05-04monitor: Move hmp_loadvm from monitor.c to hmp.cJuan Quintela1-0/+1
We are going to move the rest of hmp snapshots functions there instead of monitor.c. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-03-02qmp/hmp: add query-vm-generation-id and 'info vm-generation-id' commandsIgor Mammedov1-0/+1
Add commands to query Virtual Machine Generation ID counter. QMP command example: { "execute": "query-vm-generation-id" } HMP command example: info vm-generation-id Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Ben Warren <ben@skyportsystems.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-30COLO: Add 'x-colo-lost-heartbeat' command to trigger failoverzhanghailiang1-0/+1
We leave users to choose whatever heartbeat solution they want, if the heartbeat is lost, or other errors they detect, they can use experimental command 'x_colo_lost_heartbeat' to tell COLO to do failover, COLO will do operations accordingly. For example, if the command is sent to the Primary side, the Primary side will exit COLO mode, does cleanup work, and then, PVM will take over the service work. If sent to the Secondary side, the Secondary side will run failover work, then takes over PVM's service work. Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-04intc: make HMP 'info irq' and 'info pic' commands use InterruptStatsProvider ↵Hervé Poussineau1-0/+2
interface Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Message-Id: <1474921408-24710-6-git-send-email-hpoussin@reactos.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-18trace: Allow event name pattern in "info trace-events"Lluís Vilanova1-0/+1
Homogenizes the command capabilities with QMP. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-17hmp: Add 'info hotpluggable-cpus' HMP commandBharata B Rao1-0/+1
This is the HMP equivalent for QMP query-hotpluggable-cpus. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [dwg: Fixed problem with printf formats on 32-bit host] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-22Dump: add hmp command "info dump"Peter Xu1-0/+1
It will calculate percentage of finished work from completed and total. Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1455772616-8668-11-git-send-email-peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10migrate_start_postcopy: Command to trigger transition to postcopyDr. David Alan Gilbert1-0/+1
Once postcopy is enabled (with migrate_set_capability), the migration will still start on precopy mode. To cause a transition into postcopy the: migrate_start_postcopy command must be issued. Postcopy will start sometime after this (when it's next checked in the migration loop). Issuing the command before migration has started will error, and issuing after it has finished is ignored. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-09-04hmp: add info iothreads commandTing Wang1-0/+1
Make "info iothreads" available on the HMP monitor. For example, the results are as follows when executing qemu command with "-object iothread,id=iothread-1 -object iothread,id=iothread-2". (qemu) info iothreads iothread-1: thread_id=123 iothread-2: thread_id=456 Signed-off-by: Ting Wang <kathy.wangting@huawei.com> Message-Id: <1435306033-58372-1-git-send-email-kathy.wangting@huawei.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Amos Jianjun Kong <kongjianjun@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-09-03trace-events: Add hmp completionDr. David Alan Gilbert1-0/+1
Add completion for the trace event names in the hmp trace-event command. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-id: 1439548063-18410-1-git-send-email-dgilbert@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12qmp/hmp: add rocker device supportScott Feldman1-0/+4
Add QMP/HMP support for rocker devices. This is mostly for debugging purposes to see inside the device's tables and port configurations. Some examples: (qemu) info rocker sw1 name: sw1 id: 0x0000013512005452 ports: 4 (qemu) info rocker-ports sw1 ena/ speed/ auto port link duplex neg? sw1.1 up 10G FD No sw1.2 up 10G FD No sw1.3 !ena 10G FD No sw1.4 !ena 10G FD No (qemu) info rocker-of-dpa-flows sw1 prio tbl hits key(mask) --> actions 2 60 pport 1 vlan 1 LLDP src 00:02:00:00:02:00 dst 01:80:c2:00:00:0e 2 60 pport 1 vlan 1 ARP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:00:02 proto 58 3 50 vlan 2 dst 33:33:ff:00:00:02 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:03:00 proto 58 3 50 1 vlan 2 dst 33:33:ff:00:03:00 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 ARP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 3 50 2 vlan 2 dst 00:02:00:00:02:00 --> write group 0x02000001 goto tbl 60 2 60 1 pport 2 vlan 2 IP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 proto 1 3 50 2 vlan 1 dst 00:02:00:00:03:00 --> write group 0x01000002 goto tbl 60 2 60 1 pport 1 vlan 1 IP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 proto 1 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:00:01 proto 58 3 50 vlan 1 dst 33:33:ff:00:00:01 --> write group 0x31000000 goto tbl 60 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:02:00 proto 58 3 50 1 vlan 1 dst 33:33:ff:00:02:00 --> write group 0x31000000 goto tbl 60 1 60 173 pport 2 vlan 2 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x02000000 1 60 6 pport 2 vlan 2 IPv6 src <any> dst <any> --> write group 0x02000000 1 60 174 pport 1 vlan 1 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x01000000 1 60 174 pport 2 vlan 2 IP src <any> dst <any> --> write group 0x02000000 1 60 6 pport 1 vlan 1 IPv6 src <any> dst <any> --> write group 0x01000000 1 60 181 pport 2 vlan 2 ARP src <any> dst <any> --> write group 0x02000000 1 10 715 pport 2 --> apply new vlan 2 goto tbl 20 1 60 177 pport 1 vlan 1 ARP src <any> dst <any> --> write group 0x01000000 1 60 174 pport 1 vlan 1 IP src <any> dst <any> --> write group 0x01000000 1 10 717 pport 1 --> apply new vlan 1 goto tbl 20 1 0 1432 pport 0(0xffff) --> goto tbl 10 (qemu) info rocker-of-dpa-groups sw1 id (decode) --> buckets 0x32000001 (type L2 multicast vlan 2 index 1) --> groups [0x02000001,0x02000000] 0x02000001 (type L2 interface vlan 2 pport 1) --> pop vlan out pport 1 0x01000002 (type L2 interface vlan 1 pport 2) --> pop vlan out pport 2 0x02000000 (type L2 interface vlan 2 pport 0) --> pop vlan out pport 0 0x01000000 (type L2 interface vlan 1 pport 0) --> pop vlan out pport 0 0x31000000 (type L2 multicast vlan 1 index 0) --> groups [0x01000002,0x01000000] [Added "query-" prefixes to rocker.json commands as suggested by Eric Blake <eblake@redhat.com>. --Stefan] Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Message-id: 1433985681-56138-5-git-send-email-sfeldma@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-02monitor: Use traditional command interface for HMP device_addMarkus Armbruster1-0/+1
All QMP commands use the "new" handler interface (mhandler.cmd_new). Most HMP commands still use the traditional interface (mhandler.cmd), but a few use the "new" one. Complicates handle_user_command() for no gain, so I'm converting these to the traditional interface. For device_add, that's easy: just wrap the obvious hmp_device_add() around do_device_add(). monitor_user_noop() is now unused, drop it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02monitor: Convert client_migrate_info to QAPIMarkus Armbruster1-0/+1
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-05-07migration: Add hmp interface to set and query parametersLiang Li1-0/+4
Add the hmp interface to tune and query the parameters used in live migration. Signed-off-by: Liang Li <liang.z.li@intel.com> Signed-off-by: Yang Zhang <yang.z.zhang@intel.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-04-30monitor: Remove unused functionsThomas Huth1-1/+0
The functions ringbuf_read_completion() and monitor_get_rs() are not used anywhere anymore, so let's remove them. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-17qom: Implement qom-set HMP commandAndreas Färber1-0/+1
Re-implemented based on qmp_qom_set() to facilitate argument parsing. Warn about ambiguous path arguments. Reviewed-by: Gonglei <arei.gonglei@huawei.com> Tested-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-03-17qom: Implement qom-list HMP commandAndreas Färber1-0/+1
Implement it as a wrapper for QMP qom-list, but mimic the behavior of scripts/qmp/qom-list in making the path argument optional and listing the root if absent, to hint users what kind of path to pass. Reviewed-by: Gonglei <arei.gonglei@huawei.com> Tested-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-03-16Add migrate_incomingDr. David Alan Gilbert1-0/+1
Add migrate_incoming/migrate-incoming to start an incoming migration. Once a qemu has been started with -incoming defer the migration can be started by issuing: migrate_incoming uri Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-02-18hmp: Name HMP command handler functions hmp_COMMAND()Markus Armbruster1-3/+3
Some are called do_COMMAND() (old ones, usually), some hmp_COMMAND(), and sometimes COMMAND pointlessly differs in spelling. Normalize to hmp_COMMAND(), where COMMAND is exactly the command name with '-' replaced by '_'. Exceptions: * do_device_add() and client_migrate_info() *not* renamed to hmp_device_add(), hmp_client_migrate_info(), because they're also QMP handlers. They still need to be converted to QAPI. * do_memory_dump(), do_physical_memory_dump(), do_ioport_read(), do_ioport_write() renamed do hmp_* instead of hmp_x(), hmp_xp(), hmp_i(), hmp_o(), because those names are too cryptic for my taste. * do_info_help() renamed to hmp_info_help() instead of hmp_info(), because it only covers help. Signed-off-by: Markus Armbruster <armbru@redhat.com>
2014-09-26Add HMP command "info memory-devices"Zhu Guihua1-0/+1
Provides HMP equivalent of QMP query-memory-devices command. Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Reviewed-By: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-19hmp: add info memdevHu Tao1-0/+1
This is the hmp counterpart of qmp query-memdev. Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> MST: fix build on 32 bit
2014-06-11monitor: Add delvm and loadvm argument completionHani Benhabiles1-0/+2
Signed-off-by: Hani Benhabiles <hani@linux.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-11monitor: Add host_net_remove arguments completionHani Benhabiles1-0/+2
Relies on readline unique completion strings patch to make the added vlan/hub completion values unique, instead of using something like a hash table. Signed-off-by: Hani Benhabiles <hani@linux.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-11monitor: Add host_net_add device argument completionHani Benhabiles1-0/+1
Also fix the parameters documentation. Signed-off-by: Hani Benhabiles <hani@linux.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-11monitor: Add migrate_set_capability completionHani Benhabiles1-0/+2
Signed-off-by: Hani Benhabiles <hani@linux.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-11monitor: Add watchdog_action argument completionHani Benhabiles1-0/+2
Signed-off-by: Hani Benhabiles <hani@linux.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-11monitor: Add ringbuf_write and ringbuf_read argument completionHani Benhabiles1-0/+2
Export chr_is_ringbuf() function. Also remove left-over function prototypes while at it. Signed-off-by: Hani Benhabiles <hani@linux.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-15monitor: Add netdev_del id argument completion.Hani Benhabiles1-0/+1
Signed-off-by: Hani Benhabiles <hani@linux.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-15monitor: Add netdev_add type argument completion.Hani Benhabiles1-0/+1
Also update the command's documentation. Signed-off-by: Hani Benhabiles <hani@linux.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-15monitor: Add set_link arguments completion.Hani Benhabiles1-0/+1
Make it possible to query all net clients without specifying an ID when calling qemu_find_net_clients_except(). This also adds the add_completion_option() function which is to be used for other commands completions as well. Signed-off-by: Hani Benhabiles <hani@linux.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-15monitor: Add chardev-add backend argument completion.Hani Benhabiles1-0/+1
Signed-off-by: Hani Benhabiles <hani@linux.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-15monitor: Add chardev-remove command completion.Hani Benhabiles1-0/+1
Signed-off-by: Hani Benhabiles <hani@linux.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-15monitor: Convert sendkey to use command_completion.Hani Benhabiles1-0/+1
Signed-off-by: Hani Benhabiles <hani@linux.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-04-25monitor: Add device_add and device_del completion.Hani Benhabiles1-0/+2
Also fix device_add completion including non-hotpluggable devices. Signed-off-by: Hani Benhabiles <hani@linux.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-04-25monitor: Add command_completion callback to mon_cmd_t.Hani Benhabiles1-0/+3
Convert object_add and object_del commands to use the new callback. Signed-off-by: Hani Benhabiles <hani@linux.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-01-06monitor: add object-add (QMP) and object_add (HMP) commandPaolo Bonzini1-0/+1
Add two commands that are the monitor counterparts of -object. The commands have the same Visitor-based implementation, but use different kinds of visitors so that the HMP command has a DWIM string-based syntax, while the QMP variant accepts a stricter JSON-based properties dictionary. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-01-06monitor: add object-del (QMP) and object_del (HMP) commandPaolo Bonzini1-0/+1
These two commands invoke the "unparent" method of Object. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-01-06qemu-monitor: HMP cpu-add wrapperJason J. Herne1-0/+1
Add HMP cpu-add wrapper to allow cpu hot plugging via monitor. Signed-off-by: Jason J. Herne <jjherne@us.ibm.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-09-12hmp: add interface hmp_snapshot_delete_blkdev_internalWenchao Xia1-0/+1
It is hard to make both id and name optional in hmp console as qmp interface, so this interface require user to specify name. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.1 at 2024-11-03 14:02:29 +0000