aboutsummaryrefslogtreecommitdiff
path: root/hmp-commands-info.hx
AgeCommit message (Collapse)AuthorFilesLines
2020-10-06replay: introduce info hmp/qmp commandPavel Dovgalyuk1-0/+11
This patch introduces 'info replay' monitor command and corresponding qmp request. These commands request the current record/replay mode, replay log file name, and the instruction count (number of recorded/replayed instructions). The instruction count can be used with the replay_seek/replay_break commands added in the next two patches. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Message-Id: <160174520026.12451.13112161947433306561.stgit@pasha-ThinkPad-X280> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-10memory: Make 'info mtree' not display disabled regions by defaultPhilippe Mathieu-Daudé1-3/+4
We might have many disabled memory regions, making the 'info mtree' output too verbose to be useful. Remove the disabled regions in the default output, but allow the monitor user to display them using the '-D' option. Before: (qemu) info mtree memory-region: system 0000000000000000-ffffffffffffffff (prio 0, i/o): system 0000000000000000-0000000007ffffff (prio 0, ram): alias ram-below-4g @pc.ram 0000000000000000-0000000007ffffff 0000000000000000-ffffffffffffffff (prio -1, i/o): pci 00000000000a0000-00000000000bffff (prio 1, i/o): vga-lowmem 00000000000c0000-00000000000dffff (prio 1, rom): pc.rom 00000000000e0000-00000000000fffff (prio 1, rom): alias isa-bios @pc.bios 0000000000020000-000000000003ffff 00000000fffc0000-00000000ffffffff (prio 0, rom): pc.bios 00000000000a0000-00000000000bffff (prio 1, i/o): alias smram-region @pci 00000000000a0000-00000000000bffff 00000000000c0000-00000000000c3fff (prio 1, ram): alias pam-ram @pc.ram 00000000000c0000-00000000000c3fff [disabled] 00000000000c0000-00000000000c3fff (prio 1, ram): alias pam-pci @pc.ram 00000000000c0000-00000000000c3fff [disabled] 00000000000c0000-00000000000c3fff (prio 1, ram): alias pam-rom @pc.ram 00000000000c0000-00000000000c3fff [disabled] 00000000000c0000-00000000000c3fff (prio 1, i/o): alias pam-pci @pci 00000000000c0000-00000000000c3fff 00000000000c4000-00000000000c7fff (prio 1, ram): alias pam-ram @pc.ram 00000000000c4000-00000000000c7fff [disabled] 00000000000c4000-00000000000c7fff (prio 1, ram): alias pam-pci @pc.ram 00000000000c4000-00000000000c7fff [disabled] 00000000000c4000-00000000000c7fff (prio 1, ram): alias pam-rom @pc.ram 00000000000c4000-00000000000c7fff [disabled] 00000000000c4000-00000000000c7fff (prio 1, i/o): alias pam-pci @pci 00000000000c4000-00000000000c7fff 00000000000c8000-00000000000cbfff (prio 1, ram): alias pam-ram @pc.ram 00000000000c8000-00000000000cbfff [disabled] 00000000000c8000-00000000000cbfff (prio 1, ram): alias pam-pci @pc.ram 00000000000c8000-00000000000cbfff [disabled] 00000000000c8000-00000000000cbfff (prio 1, ram): alias pam-rom @pc.ram 00000000000c8000-00000000000cbfff [disabled] 00000000000c8000-00000000000cbfff (prio 1, i/o): alias pam-pci @pci 00000000000c8000-00000000000cbfff 00000000000cc000-00000000000cffff (prio 1, ram): alias pam-ram @pc.ram 00000000000cc000-00000000000cffff [disabled] 00000000000cc000-00000000000cffff (prio 1, ram): alias pam-pci @pc.ram 00000000000cc000-00000000000cffff [disabled] 00000000000cc000-00000000000cffff (prio 1, ram): alias pam-rom @pc.ram 00000000000cc000-00000000000cffff [disabled] 00000000000cc000-00000000000cffff (prio 1, i/o): alias pam-pci @pci 00000000000cc000-00000000000cffff 00000000000d0000-00000000000d3fff (prio 1, ram): alias pam-ram @pc.ram 00000000000d0000-00000000000d3fff [disabled] 00000000000d0000-00000000000d3fff (prio 1, ram): alias pam-pci @pc.ram 00000000000d0000-00000000000d3fff [disabled] 00000000000d0000-00000000000d3fff (prio 1, ram): alias pam-rom @pc.ram 00000000000d0000-00000000000d3fff [disabled] 00000000000d0000-00000000000d3fff (prio 1, i/o): alias pam-pci @pci 00000000000d0000-00000000000d3fff 00000000000d4000-00000000000d7fff (prio 1, ram): alias pam-ram @pc.ram 00000000000d4000-00000000000d7fff [disabled] 00000000000d4000-00000000000d7fff (prio 1, ram): alias pam-pci @pc.ram 00000000000d4000-00000000000d7fff [disabled] 00000000000d4000-00000000000d7fff (prio 1, ram): alias pam-rom @pc.ram 00000000000d4000-00000000000d7fff [disabled] 00000000000d4000-00000000000d7fff (prio 1, i/o): alias pam-pci @pci 00000000000d4000-00000000000d7fff 00000000000d8000-00000000000dbfff (prio 1, ram): alias pam-ram @pc.ram 00000000000d8000-00000000000dbfff [disabled] 00000000000d8000-00000000000dbfff (prio 1, ram): alias pam-pci @pc.ram 00000000000d8000-00000000000dbfff [disabled] 00000000000d8000-00000000000dbfff (prio 1, ram): alias pam-rom @pc.ram 00000000000d8000-00000000000dbfff [disabled] 00000000000d8000-00000000000dbfff (prio 1, i/o): alias pam-pci @pci 00000000000d8000-00000000000dbfff 00000000000dc000-00000000000dffff (prio 1, ram): alias pam-ram @pc.ram 00000000000dc000-00000000000dffff [disabled] 00000000000dc000-00000000000dffff (prio 1, ram): alias pam-pci @pc.ram 00000000000dc000-00000000000dffff [disabled] 00000000000dc000-00000000000dffff (prio 1, ram): alias pam-rom @pc.ram 00000000000dc000-00000000000dffff [disabled] 00000000000dc000-00000000000dffff (prio 1, i/o): alias pam-pci @pci 00000000000dc000-00000000000dffff 00000000000e0000-00000000000e3fff (prio 1, ram): alias pam-ram @pc.ram 00000000000e0000-00000000000e3fff [disabled] 00000000000e0000-00000000000e3fff (prio 1, ram): alias pam-pci @pc.ram 00000000000e0000-00000000000e3fff [disabled] 00000000000e0000-00000000000e3fff (prio 1, ram): alias pam-rom @pc.ram 00000000000e0000-00000000000e3fff [disabled] 00000000000e0000-00000000000e3fff (prio 1, i/o): alias pam-pci @pci 00000000000e0000-00000000000e3fff 00000000000e4000-00000000000e7fff (prio 1, ram): alias pam-ram @pc.ram 00000000000e4000-00000000000e7fff [disabled] 00000000000e4000-00000000000e7fff (prio 1, ram): alias pam-pci @pc.ram 00000000000e4000-00000000000e7fff [disabled] 00000000000e4000-00000000000e7fff (prio 1, ram): alias pam-rom @pc.ram 00000000000e4000-00000000000e7fff [disabled] 00000000000e4000-00000000000e7fff (prio 1, i/o): alias pam-pci @pci 00000000000e4000-00000000000e7fff 00000000000e8000-00000000000ebfff (prio 1, ram): alias pam-ram @pc.ram 00000000000e8000-00000000000ebfff [disabled] 00000000000e8000-00000000000ebfff (prio 1, ram): alias pam-pci @pc.ram 00000000000e8000-00000000000ebfff [disabled] 00000000000e8000-00000000000ebfff (prio 1, ram): alias pam-rom @pc.ram 00000000000e8000-00000000000ebfff [disabled] 00000000000e8000-00000000000ebfff (prio 1, i/o): alias pam-pci @pci 00000000000e8000-00000000000ebfff 00000000000ec000-00000000000effff (prio 1, ram): alias pam-ram @pc.ram 00000000000ec000-00000000000effff [disabled] 00000000000ec000-00000000000effff (prio 1, ram): alias pam-pci @pc.ram 00000000000ec000-00000000000effff [disabled] 00000000000ec000-00000000000effff (prio 1, ram): alias pam-rom @pc.ram 00000000000ec000-00000000000effff [disabled] 00000000000ec000-00000000000effff (prio 1, i/o): alias pam-pci @pci 00000000000ec000-00000000000effff 00000000000f0000-00000000000fffff (prio 1, ram): alias pam-ram @pc.ram 00000000000f0000-00000000000fffff [disabled] 00000000000f0000-00000000000fffff (prio 1, ram): alias pam-pci @pc.ram 00000000000f0000-00000000000fffff [disabled] 00000000000f0000-00000000000fffff (prio 1, ram): alias pam-rom @pc.ram 00000000000f0000-00000000000fffff [disabled] 00000000000f0000-00000000000fffff (prio 1, i/o): alias pam-pci @pci 00000000000f0000-00000000000fffff 00000000fec00000-00000000fec00fff (prio 0, i/o): ioapic 00000000fed00000-00000000fed003ff (prio 0, i/o): hpet 00000000fee00000-00000000feefffff (prio 4096, i/o): apic-msi After: (qemu) info mtree memory-region: system 0000000000000000-ffffffffffffffff (prio 0, i/o): system 0000000000000000-0000000007ffffff (prio 0, ram): alias ram-below-4g @pc.ram 0000000000000000-0000000007ffffff 0000000000000000-ffffffffffffffff (prio -1, i/o): pci 00000000000a0000-00000000000bffff (prio 1, i/o): vga-lowmem 00000000000c0000-00000000000dffff (prio 1, rom): pc.rom 00000000000e0000-00000000000fffff (prio 1, rom): alias isa-bios @pc.bios 0000000000020000-000000000003ffff 00000000fffc0000-00000000ffffffff (prio 0, rom): pc.bios 00000000000a0000-00000000000bffff (prio 1, i/o): alias smram-region @pci 00000000000a0000-00000000000bffff 00000000000c0000-00000000000c3fff (prio 1, i/o): alias pam-pci @pci 00000000000c0000-00000000000c3fff 00000000000c4000-00000000000c7fff (prio 1, i/o): alias pam-pci @pci 00000000000c4000-00000000000c7fff 00000000000c8000-00000000000cbfff (prio 1, i/o): alias pam-pci @pci 00000000000c8000-00000000000cbfff 00000000000cc000-00000000000cffff (prio 1, i/o): alias pam-pci @pci 00000000000cc000-00000000000cffff 00000000000d0000-00000000000d3fff (prio 1, i/o): alias pam-pci @pci 00000000000d0000-00000000000d3fff 00000000000d4000-00000000000d7fff (prio 1, i/o): alias pam-pci @pci 00000000000d4000-00000000000d7fff 00000000000d8000-00000000000dbfff (prio 1, i/o): alias pam-pci @pci 00000000000d8000-00000000000dbfff 00000000000dc000-00000000000dffff (prio 1, i/o): alias pam-pci @pci 00000000000dc000-00000000000dffff 00000000000e0000-00000000000e3fff (prio 1, i/o): alias pam-pci @pci 00000000000e0000-00000000000e3fff 00000000000e4000-00000000000e7fff (prio 1, i/o): alias pam-pci @pci 00000000000e4000-00000000000e7fff 00000000000e8000-00000000000ebfff (prio 1, i/o): alias pam-pci @pci 00000000000e8000-00000000000ebfff 00000000000ec000-00000000000effff (prio 1, i/o): alias pam-pci @pci 00000000000ec000-00000000000effff 00000000000f0000-00000000000fffff (prio 1, i/o): alias pam-pci @pci 00000000000f0000-00000000000fffff 00000000fec00000-00000000fec00fff (prio 0, i/o): ioapic 00000000fed00000-00000000fed003ff (prio 0, i/o): hpet 00000000fee00000-00000000feefffff (prio 4096, i/o): apic-msi The old behavior is preserved using 'info mtree -D'. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-12Update comments in .hx files that mention TexinfoPeter Maydell1-4/+4
Update the header comments in .hx files that mention STEXI/ETEXI markup; this is now SRST/ERST as all these files have been converted to rST. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200306171749.10756-3-peter.maydell@linaro.org
2020-03-06*.hx: Remove all the STEXI/ETEXI blocksPeter Maydell1-329/+0
We no longer generate texinfo from the hxtool input files, so delete all the STEXI/ETEXI blocks. This commit was created using the following Perl one-liner: perl -i -n -e '$suppress = 1,next if /^STEXI/;$suppress=0,next if /^ETEXI/; print if !$suppress;' *.hx Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-06hmp-commands-info.hx: Add rST documentation fragmentsPeter Maydell1-0/+271
Add the rST versions of the documentation fragments. Once we've converted fully from Texinfo to rST we can remove the ETEXI fragments; for the moment we need both. Note that most of the SRST fragments are 2-space indented so that the 'info foo' documentation entries appear as a sublist under the 'info' entry in the top level list. Again, all we need to do to put the documentation in the Sphinx manual is a one-line hxtool-doc invocation. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200228153619.9906-22-peter.maydell@linaro.org
2019-09-17riscv: hmp: Add a command to show virtual memory mappingsBin Meng1-1/+1
This adds 'info mem' command for RISC-V, to show virtual memory mappings that aids debugging. Rather than showing every valid PTE, the command compacts the output by merging all contiguous physical address mappings into one block and only shows the merged block mapping details. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-16{hmp, hw/pvrdma}: Expose device internals via monitor interfaceYuval Shaia1-0/+14
Allow interrogating device internals through HMP interface. The exposed indicators can be used for troubleshooting by developers or sysadmin. There is no need to expose these attributes to a management system (e.x. libvirt) because (1) most of them are not "device-management' related info and (2) there is no guarantee the interface is stable. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1552300155-25216-6-git-send-email-yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2018-08-23hmp-commands-info: add sync-profileEmilio G. Cota1-0/+22
The command introduced here is just for developers. This means that: - the info displayed and the output format could change in the future - the command is only meant to be used from HMP, not from QMP Sample output: (qemu) sync-profile sync-profile is off (qemu) info sync-profile Type Object Call site Wait Time (s) Count Average (us) ------------------------------------------------------------------------------- ------------------------------------------------------------------------------- (qemu) sync-profile on (qemu) sync-profile sync-profile is on (qemu) info sync-profile 15 Type Object Call site Wait Time (s) Count Average (us) ---------------------------------------------------------------------------------------------- condvar 0x55a01813ced0 cpus.c:1165 91.38235 2842 32154.24 BQL mutex 0x55a0171b7140 cpus.c:1434 12.56490 5787 2171.23 BQL mutex 0x55a0171b7140 accel/tcg/cpu-exec.c:432 7.75846 2844 2728.01 BQL mutex 0x55a0171b7140 accel/tcg/cputlb.c:870 5.09889 2884 1767.99 BQL mutex 0x55a0171b7140 accel/tcg/cpu-exec.c:529 3.46140 3254 1063.74 BQL mutex 0x55a0171b7140 accel/tcg/cputlb.c:804 0.76333 8655 88.20 BQL mutex 0x55a0171b7140 cpus.c:1466 0.60893 2941 207.05 BQL mutex 0x55a0171b7140 util/main-loop.c:236 0.00894 6425 1.39 mutex [ 3] util/qemu-timer.c:520 0.00342 50611 0.07 mutex [ 2] util/qemu-timer.c:426 0.00254 31336 0.08 mutex [ 3] util/qemu-timer.c:234 0.00107 19275 0.06 mutex 0x55a0171d9960 vl.c:763 0.00043 6425 0.07 mutex 0x55a0180d1bb0 monitor.c:458 0.00015 1603 0.09 mutex 0x55a0180e4c78 chardev/char.c:109 0.00002 217 0.08 mutex 0x55a0180d1bb0 monitor.c:448 0.00001 162 0.08 ---------------------------------------------------------------------------------------------- (qemu) info sync-profile -m 15 Type Object Call site Wait Time (s) Count Average (us) ---------------------------------------------------------------------------------------------- condvar 0x55a01813ced0 cpus.c:1165 95.11196 3051 31174.03 BQL mutex 0x55a0171b7140 accel/tcg/cpu-exec.c:432 7.92108 3052 2595.37 BQL mutex 0x55a0171b7140 cpus.c:1434 13.38253 6210 2155.00 BQL mutex 0x55a0171b7140 accel/tcg/cputlb.c:870 5.09901 3093 1648.57 BQL mutex 0x55a0171b7140 accel/tcg/cpu-exec.c:529 4.21123 3468 1214.31 BQL mutex 0x55a0171b7140 cpus.c:1466 0.60895 3156 192.95 BQL mutex 0x55a0171b7140 accel/tcg/cputlb.c:804 0.76337 9282 82.24 BQL mutex 0x55a0171b7140 util/main-loop.c:236 0.00944 6889 1.37 mutex 0x55a01813ce80 tcg/tcg.c:397 0.00000 24 0.15 mutex 0x55a0180d1bb0 monitor.c:458 0.00018 1922 0.09 mutex [ 2] util/qemu-timer.c:426 0.00266 32710 0.08 mutex 0x55a0180e4c78 chardev/char.c:109 0.00002 260 0.08 mutex 0x55a0180d1bb0 monitor.c:448 0.00001 187 0.08 mutex 0x55a0171d9960 vl.c:763 0.00047 6889 0.07 mutex [ 3] util/qemu-timer.c:520 0.00362 53377 0.07 ---------------------------------------------------------------------------------------------- (qemu) info sync-profile -m -n 15 Type Object Call site Wait Time (s) Count Average (us) ---------------------------------------------------------------------------------------------- condvar 0x55a01813ced0 cpus.c:1165 101.39331 3398 29839.12 BQL mutex 0x55a0171b7140 accel/tcg/cpu-exec.c:432 7.92112 3399 2330.43 BQL mutex 0x55a0171b7140 cpus.c:1434 14.28280 6922 2063.39 BQL mutex 0x55a0171b7140 accel/tcg/cputlb.c:870 5.77505 3445 1676.36 BQL mutex 0x55a0171b7140 accel/tcg/cpu-exec.c:529 5.66139 3883 1457.99 BQL mutex 0x55a0171b7140 cpus.c:1466 0.60901 3519 173.06 BQL mutex 0x55a0171b7140 accel/tcg/cputlb.c:804 0.76351 10338 73.85 BQL mutex 0x55a0171b7140 util/main-loop.c:236 0.01032 7664 1.35 mutex 0x55a0180e4f08 util/qemu-timer.c:426 0.00041 901 0.45 mutex 0x55a01813ce80 tcg/tcg.c:397 0.00000 24 0.15 mutex 0x55a0180d1bb0 monitor.c:458 0.00022 2319 0.09 mutex 0x55a0180e4c78 chardev/char.c:109 0.00003 306 0.08 mutex 0x55a0180e4f08 util/qemu-timer.c:520 0.00068 8565 0.08 mutex 0x55a0180d1bb0 monitor.c:448 0.00002 215 0.08 mutex 0x55a0180e4f78 util/qemu-timer.c:426 0.00247 34224 0.07 ---------------------------------------------------------------------------------------------- (qemu) sync-profile reset (qemu) info sync-profile -m 2 Type Object Call site Wait Time (s) Count Average (us) -------------------------------------------------------------------------------------------- condvar 0x55a01813ced0 cpus.c:1165 2.78756 99 28157.12 BQL mutex 0x55a0171b7140 accel/tcg/cputlb.c:870 0.33054 102 3240.55 -------------------------------------------------------------------------------------------- (qemu) sync-profile off (qemu) sync-profile sync-profile is off (qemu) sync-profile reset (qemu) info sync-profile Type Object Call site Wait Time (s) Count Average (us) ------------------------------------------------------------------------------- ------------------------------------------------------------------------------- Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-03qapi: add conditions to VNC type/commands/events on the schemaMarc-André Lureau1-0/+2
Add #if defined(CONFIG_VNC) in generated code, and adjust the qmp/hmp code accordingly. query-qmp-schema no longer reports the command/events etc as available when disabled at compile. Commands made conditional: * query-vnc, query-vnc-servers, change-vnc-password Before the patch, the commands for !CONFIG_VNC are stubs that fail like this: {"error": {"class": "GenericError", "desc": "The feature 'vnc' is not enabled"}} Afterwards, they fail like this: {"error": {"class": "CommandNotFound", "desc": "The command FOO has not been found"}} I call that an improvement, because it lets clients distinguish between command unavailable (class CommandNotFound) and command failed (class GenericError). Events made conditional: * VNC_CONNECTED, VNC_INITIALIZED, VNC_DISCONNECTED HMP change: * info vnc Will return "unknown command: 'info vnc'" when VNC is compiled out (same as error for spice when --disable-spice) Occurrences of VNC (case insensitive) in the schema that aren't covered by this change: * add_client Command has other uses, including "socket bases character devices". These are unconditional as far as I can tell. * set_password, expire_password In theory, these commands could be used for managing any service's password. In practice, they're used for VNC and SPICE services. They're documented for "remote display session" / "remote display server". The service is selected by argument @protocol. The code special-cases protocol-specific argument checking, then calls a protocol-specific function to do the work. If it fails, the command fails with "Could not set password". It does when the service isn't compiled in (it's a stub then). We could make these commands conditional on the conjunction of all services [currently: defined(CONFIG_VNC) || defined(CONFIG_SPICE)], but I doubt it's worthwhile. * change Command has other uses, namely changing media. This patch inlines a stub; no functional change. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180703155648.11933-14-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-06-28doc: another fix to "info pic"Peter Xu1-1/+1
Something that commit 254316fa1f ("intc: make HMP 'info irq' and 'info pic' commands available on all targets", 2016-10-04) forgot to touch up. Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20171229073104.3810-2-peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28memory/hmp: Print owners/parents in "info mtree"Alexey Kardashevskiy1-3/+4
This adds owners/parents (which are the same, just occasionally owner==NULL) printing for memory regions; a new '-o' flag enabled new output. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <20180604032511.6980-1-aik@ozlabs.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-21hmp: Add commands for preconfigDr. David Alan Gilbert1-0/+10
Allow a bunch of the info commands to be used in preconfig. version, chardev, name, uuid,memdev, iothreads Were enabled in QMP in the previous patch from Igor status, hotpluggable_cpus Was enabled in the original allow-preconfig series history is HMP specific qom-tree Don't have a QMP equivalent Also enable the qom commands qom-list and qom-set. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20180620153947.30834-6-dgilbert@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Dropped info numa as per Igor's 2018-06-21 review
2018-03-13sev/i386: hmp: add 'info sev' commandBrijesh Singh1-0/+16
The command can be used to show the SEV information when memory encryption is enabled on AMD platform. Cc: Eric Blake <eblake@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Reviewed-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-01-25target/m68k: add HMP command "info tlb"Laurent Vivier1-1/+1
Dump MMU state and address mappings. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180118193846.24953-8-laurent@vivier.eu>
2017-10-05hmp-commands-info: Change "@findex FOO" to "@findex info FOO"Markus Armbruster1-59/+59
qemu-doc has the monitor commands in the "Function Index". The "info FOO" are listed as "FOO" there. List them as "info FOO" instead. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20171002134538.23332-4-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-10-05hmp-commands-info: Move Texinfo stanzas to conventional placeMarkus Armbruster1-10/+10
A command's STEXI..ETEXI stanza follows the command's initializer. Two commands got them backwards. Correct that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20171002134538.23332-3-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-10-05hmp-commands-info: Fix "info rocker-FOO" misspellingsMarkus Armbruster1-3/+3
Screwed up in commit da76ee7. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20171002134538.23332-2-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-09-21memory: Rework "info mtree" to print flat views and dispatch treesAlexey Kardashevskiy1-3/+4
This adds a new "-d" switch to "info mtree" to print dispatch tree internals. This changes the way "-f" is handled - it prints now flat views and associated address spaces. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <20170921085110.25598-15-aik@ozlabs.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-14hmp: introduce 'info memory_size_summary' commandVadim Galitsyn1-0/+16
Add 'info memory_size_summary' command which is a sibling of QMP command query-memory-size-summary. It provides the following memory information in bytes: * base-memory - size of "base" memory specified with command line option -m. * plugged-memory - amount of memory that was hot-plugged. If target does not have CONFIG_MEM_HOTPLUG enabled, no value is reported. Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Signed-off-by: Mohammed Gamal <mohammed.gamal@profitbricks.com> Signed-off-by: Eduardo Otubo <eduardo.otubo@profitbricks.com> Signed-off-by: Vadim Galitsyn <vadim.galitsyn@profitbricks.com> Reviewed-by: Eugene Crosser <evgenii.cherkashin@profitbricks.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: qemu-devel@nongnu.org Message-Id: <20170829153022.27004-4-vadim.galitsyn@profitbricks.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Fixed up comments from Igor's review
2017-09-01hmp: allow apic-id for "info lapic"Yi Wang1-3/+4
Add [apic-id] support for hmp command "info lapic", which is useful when debugging ipi and so on. Current behavior is not changed when the parameter isn't specified. Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Signed-off-by: Yun Liu <liu.yunh@zte.com.cn> Message-Id: <1501049917-4701-3-git-send-email-wang.yi59@zte.com.cn> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-07-14s390x/migration: Monitor commands for storage attributesClaudio Imbrenda1-0/+16
Add an "info" monitor command to non-destructively inspect the state of the storage attributes of the guest, and a normal command to toggle migration mode (useful for debugging). Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-04monitor: disable "info jit" and "info opcount" if !TCGPaolo Bonzini1-0/+4
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-29monitor: Add -a (all) option to info registersSuraj Jitindar Singh1-3/+3
The info registers command in the qemu monitor is used to dump register values. Currently this command uses the monitor cpu (which can be set by the user) as the cpu for whose registers will be dumped. Sometimes it is useful to see the registers for all cpus and currently this requires setting the monitor cpu and the re-running the command for each cpu in the system. I would be nice if there was an easier way to do this. Add the "-a" option to the info registers command to dump the register values for all cpus. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Message-Id: <20170608054116.17203-1-sjitindarsingh@gmail.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-05-17ramblock: add new hmp command "info ramblock"Peter Xu1-0/+14
To dump information about ramblocks. It looks like: (qemu) info ramblock Block Name PSize Offset Used Total /objects/mem 2 MiB 0x0000000000000000 0x0000000080000000 0x0000000080000000 vga.vram 4 KiB 0x0000000080060000 0x0000000001000000 0x0000000001000000 /rom@etc/acpi/tables 4 KiB 0x00000000810b0000 0x0000000000020000 0x0000000000200000 pc.bios 4 KiB 0x0000000080000000 0x0000000000040000 0x0000000000040000 0000:00:03.0/e1000.rom 4 KiB 0x0000000081070000 0x0000000000040000 0x0000000000040000 pc.rom 4 KiB 0x0000000080040000 0x0000000000020000 0x0000000000020000 0000:00:02.0/vga.rom 4 KiB 0x0000000081060000 0x0000000000010000 0x0000000000010000 /rom@etc/table-loader 4 KiB 0x00000000812b0000 0x0000000000001000 0x0000000000001000 /rom@etc/acpi/rsdp 4 KiB 0x00000000812b1000 0x0000000000001000 0x0000000000001000 Ramblock is something hidden internally in QEMU implementation, and this command should only be used by mostly QEMU developers on RAM stuff. It is not a command suitable for QMP interface. So only HMP interface is provided for it. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1494562661-9063-4-git-send-email-peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-03-02qmp/hmp: add query-vm-generation-id and 'info vm-generation-id' commandsIgor Mammedov1-0/+14
Add commands to query Virtual Machine Generation ID counter. QMP command example: { "execute": "query-vm-generation-id" } HMP command example: info vm-generation-id Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Ben Warren <ben@skyportsystems.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-01-27memory: hmp: add "-f" for "info mtree"Peter Xu1-3/+3
Adding one more option "-f" for "info mtree" to dump the flat views of all the address spaces. This will be useful to debug the memory rendering logic, also it'll be much easier with it to know what memory region is handling what address range. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1484556005-29701-3-git-send-email-peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-04intc: make HMP 'info irq' and 'info pic' commands available on all targetsHervé Poussineau1-4/+1
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Message-Id: <1474921408-24710-7-git-send-email-hpoussin@reactos.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-04intc: make HMP 'info irq' and 'info pic' commands use InterruptStatsProvider ↵Hervé Poussineau1-12/+0
interface Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Message-Id: <1474921408-24710-6-git-send-email-hpoussin@reactos.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-19monitor: remove mhandler.cmd_newMarc-André Lureau1-59/+59
This is no longer necessary now that we aren't using middle mode anymore. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20160912091913.15831-12-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-18trace: Add QAPI/QMP interfaces to query and control per-vCPU tracing stateLluís Vilanova1-3/+3
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-18trace: Allow event name pattern in "info trace-events"Lluís Vilanova1-3/+5
Homogenizes the command capabilities with QMP. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-17hmp: Add 'info hotpluggable-cpus' HMP commandBharata B Rao1-0/+14
This is the HMP equivalent for QMP query-hotpluggable-cpus. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [dwg: Fixed problem with printf formats on 32-bit host] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-22Dump: add hmp command "info dump"Peter Xu1-0/+14
It will calculate percentage of finished work from completed and total. Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1455772616-8668-11-git-send-email-peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-25hmp: added io apic dump statePavel Butsykin1-0/+16
Added the hmp command to query io apic state, may be usefull after guest crashes to understand IRQ routing in guest. Implementation is only for kvm here. The dump will look like (qemu) info ioapic ioapic id=0x00 sel=0x26 (redir[11]) pin 0 0x0000000000010000 dest=0 vec=0 active-hi edge masked fixed physical pin 1 0x0000000000000031 dest=0 vec=49 active-hi edge fixed physical ... pin 23 0x0000000000010000 dest=0 vec=0 active-hi edge masked fixed physical IRR (none) Remote IRR (none) Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Andreas Färber <afaerber@suse.de> Message-Id: <1442927901-1084-9-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-25hmp: added local apic dump statePavel Butsykin1-0/+16
Added the hmp command to query local apic registers state, may be usefull after guest crashes to understand IRQ routing in guest. (qemu) info lapic dumping local APIC state for CPU 0 LVT0 0x00010700 active-hi edge masked ExtINT (vec 0) LVT1 0x00000400 active-hi edge NMI LVTPC 0x00010000 active-hi edge masked Fixed (vec 0) LVTERR 0x000000fe active-hi edge Fixed (vec 254) LVTTHMR 0x00010000 active-hi edge masked Fixed (vec 0) LVTT 0x000000ef active-hi edge one-shot Fixed (vec 239) Timer DCR=0x3 (divide by 16) initial_count = 61360 SPIV 0x000001ff APIC enabled, focus=off, spurious vec 255 ICR 0x000000fd physical edge de-assert no-shorthand ICR2 0x00000001 cpu 1 (X2APIC ID) ESR 0x00000000 ISR (none) IRR 239 APR 0x00 TPR 0x00 DFR 0x0f LDR 0x00 PPR 0x00 Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Andreas Färber <afaerber@suse.de> Message-Id: <1442927901-1084-7-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-22hmp: Restore "info pci"Paolo Bonzini1-0/+14
Dropped by commit da76ee76f78b9705e2a91e3c964aef28fecededb's transition to hmp-commands-info.hx. Reported-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1442589509-10806-1-git-send-email-pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-09-16monitor: added generation of documentation for hmp-commands-info.hxPavel Butsykin1-0/+8
It will be easier if you need to add info-commands to edit only hmp-commands-info.hx, before this had to edit monitor.c and hmp-commands.hx. From the build point of view all documentation is saved into qemu-monitor-info.texi which from now on is used for all user documentation building. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Peter Maydell <peter.maydell@linaro.org> Message-Id: <1441899541-1856-5-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-16hmp-commands-info: move info_cmds content out of monitor.cPavel Butsykin1-0/+741
For moving target- and device-specific code from monitor.c, to beginning we move info_cmds content to hmp-commands-info.hx Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Peter Maydell <peter.maydell@linaro.org> Message-Id: <1441899541-1856-2-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2024-12-27 08:15:09 +0000