aboutsummaryrefslogtreecommitdiff
path: root/gdbstub.c
AgeCommit message (Collapse)AuthorFilesLines
2020-10-06replay: create temporary snapshot at debugger connectionPavel Dovgalyuk1-0/+1
When record/replay does not uses overlays for storing the snapshots, user is not capable of issuing reverse debugging commands. This patch adds creation of the VM snapshot on the temporary overlay image, when the debugger connects to QEMU. Therefore the execution can be rewind to the moment of the debugger connection while debugging the virtual machine. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> -- v6: - dropped unused error processing (suggested by Philippe Mathieu-Daudé) Message-Id: <160174524096.12451.11651270339216758643.stgit@pasha-ThinkPad-X280> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-06gdbstub: add reverse continue support in replay modePavel Dovgalyuk1-1/+9
This patch adds support of the reverse continue operation for gdbstub. Reverse continue finds the last breakpoint that would happen in normal execution from the beginning to the current moment. Implementation of the reverse continue replays the execution twice: to find the breakpoints that were hit and to seek to the last breakpoint. Reverse continue loads the previous snapshot and tries to find the breakpoint since that moment. If there are no such breakpoints, it proceeds to the earlier snapshot, and so on. When no breakpoints or watchpoints were hit at all, execution stops at the beginning of the replay log. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Message-Id: <160174522930.12451.6994758004725016836.stgit@pasha-ThinkPad-X280> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-06gdbstub: add reverse step support in replay modePavel Dovgalyuk1-2/+53
GDB remote protocol supports two reverse debugging commands: reverse step and reverse continue. This patch adds support of the first one to the gdbstub. Reverse step is intended to step one instruction in the backwards direction. This is not possible in regular execution. But replayed execution is deterministic, therefore we can load one of the prior snapshots and proceed to the desired step. It is equivalent to stepping one instruction back. There should be at least one snapshot preceding the debugged part of the replay log. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> -- v4 changes: - inverted condition in cpu_handle_guest_debug (suggested by Alex Bennée) Message-Id: <160174522341.12451.1498758422543765253.stgit@pasha-ThinkPad-X280> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21trace: switch position of headers to what Meson requiresPaolo Bonzini1-1/+1
Meson doesn't enjoy the same flexibility we have with Make in choosing the include path. In particular the tracing headers are using $(build_root)/$(<D). In order to keep the include directives unchanged, the simplest solution is to generate headers with patterns like "trace/trace-audio.h" and place forwarding headers in the source tree such that for example "audio/trace.h" includes "trace/trace-audio.h". This patch is too ugly to be applied to the Makefiles now. It's only a way to separate the changes to the tracing header files from the Meson rewrite of the tracing logic. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-21qom: Change object_get_canonical_path_component() not to mallocMarkus Armbruster1-1/+1
object_get_canonical_path_component() returns a malloced copy of a property name on success, null on failure. 19 of its 25 callers immediately free the returned copy. Change object_get_canonical_path_component() to return the property name directly. Since modifying the name would be wrong, adjust the return type to const char *. Drop the free from the 19 callers become simpler, add the g_strdup() to the other six. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200714160202.3121879-4-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Li Qiang <liq3ea@gmail.com>
2020-05-06gdbstub/linux-user: support debugging over a unix socketAlex Bennée1-16/+87
While debugging over TCP is fairly straightforward now we have test cases that want to orchestrate via make and currently a parallel build fails as two processes can't use the same listening port. While system emulation offers a wide cornucopia of connection methods thanks to the chardev abstraction we are a little more limited for linux user. Thankfully the programming API for a TCP socket and a local UNIX socket is pretty much the same once it's set up. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200430190122.4592-7-alex.bennee@linaro.org>
2020-05-06gdbstub: eliminate gdbserver_fd globalAlex Bennée1-13/+11
We don't really need to track this fd beyond the initial creation of the socket. We already know if the system has been initialised by virtue of the gdbserver_state so lets remove it. This makes the later re-factoring easier. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200430190122.4592-6-alex.bennee@linaro.org>
2020-04-07gdbstub: fix compiler complainingDenis Plotnikov1-2/+2
./gdbstub.c: In function ‘handle_query_thread_extra’: /usr/include/glib-2.0/glib/glib-autocleanups.h:28:10: error: ‘cpu_name’ may be used uninitialized in this function [-Werror=maybe-uninitialized] g_free (*pp); ^ ./gdbstub.c:2063:26: note: ‘cpu_name’ was declared here g_autofree char *cpu_name; ^ cc1: all warnings being treated as errors Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> Message-Id: <20200326151407.25046-1-dplotnikov@virtuozzo.com> Reported-by: Euler Robot <euler.robot@huawei.com> Reported-by: Chen Qun <kuhn.chenqun@huawei.com> Reviewed-by: Miroslav Rezanina <mrezanin@redhat.com> Message-Id: <20200325092137.24020-1-kuhn.chenqun@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200403191150.863-7-alex.bennee@linaro.org>
2020-03-17gdbstub: Fix single-step issue by confirming 'vContSupported+' feature to gdbChangbin Du1-1/+1
Recently when debugging an arm32 system on qemu, I found sometimes the single-step command (stepi) is not working. This can be reproduced by below steps: 1) start qemu-system-arm -s -S .. and wait for gdb connection. 2) start gdb and connect to qemu. In my case, gdb gets a wrong value (0x60) for PC, which is an another bug. 3) After connected, type 'stepi' and expect it will stop at next ins. But, it has never stopped. This because: 1) We doesn't report ‘vContSupported’ feature to gdb explicitly and gdb think we do not support it. In this case, gdb use a software breakpoint to emulate single-step. 2) Since gdb gets a wrong initial value of PC, then gdb inserts a breakpoint to wrong place (PC+4). Not only for the arm target, Philippe has also encountered this on MIPS. Probably gdb has different assumption for different architectures. Since we do support ‘vContSupported’ query command, so let's tell gdb that we support it. Before this change, gdb send below 'Z0' packet to implement single-step: gdb_handle_packet: Z0,4,4 After this change, gdb send "vCont;s.." which is expected: gdb_handle_packet: vCont? put_packet: vCont;c;C;s;S gdb_handle_packet: vCont;s:p1.1;c:p1.-1 Signed-off-by: Changbin Du <changbin.du@gmail.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200221002559.6768-1-changbin.du@gmail.com> [AJB: fix for static gdbstub] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-Id: <20200316172155.971-29-alex.bennee@linaro.org>
2020-03-17gdbstub: do not split gdb_monitor_write payloadDamien Hedde1-20/+3
Since we can now send packets of arbitrary length: simplify gdb_monitor_write() and send the whole payload in one packet. Suggested-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20191211160514.58373-3-damien.hedde@greensocs.com> Message-Id: <20200316172155.971-28-alex.bennee@linaro.org>
2020-03-17gdbstub: change GDBState.last_packet to GByteArrayDamien Hedde1-18/+21
Remove the packet size upper limit by using a GByteArray instead of a statically allocated array for last_packet. Thus we can now send big packets. Also remove the last_packet_len field and use last_packet->len instead. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191211160514.58373-2-damien.hedde@greensocs.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200316172155.971-27-alex.bennee@linaro.org>
2020-03-17gdbstub: extend GByteArray to read register helpersAlex Bennée1-10/+10
Instead of passing a pointer to memory now just extend the GByteArray to all the read register helpers. They can then safely append their data through the normal way. We don't bother with this abstraction for write registers as we have already ensured the buffer being copied from is the correct size. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Message-Id: <20200316172155.971-15-alex.bennee@linaro.org>
2020-03-17gdbstub: move mem_buf to GDBState and use GByteArrayAlex Bennée1-21/+35
This is in preparation for further re-factoring of the register API with the rest of the code. Theoretically the read register function could overwrite the MAX_PACKET_LENGTH buffer although currently all registers are well within the size range. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Tested-by: Damien Hedde <damien.hedde@greensocs.com> Message-Id: <20200316172155.971-10-alex.bennee@linaro.org>
2020-03-17gdbstub: move str_buf to GDBState and use GStringAlex Bennée1-105/+90
Rather than having a static buffer replace str_buf with a GString which we know can grow on demand. Convert the internal functions to take a GString instead of a char * and length. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Tested-by: Damien Hedde <damien.hedde@greensocs.com> Message-Id: <20200316172155.971-9-alex.bennee@linaro.org>
2020-03-17gdbstub: stop passing GDBState * around and use globalAlex Bennée1-283/+278
We only have one GDBState which should be allocated at the time we process any commands. This will make further clean-up a bit easier. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200316172155.971-8-alex.bennee@linaro.org>
2020-03-17gdbstub: make GDBState static and have common init functionAlex Bennée1-87/+81
Instead of allocating make this entirely static. We shall reduce the size of the structure in later commits and dynamically allocate parts of it. We introduce an init and reset helper function to keep all the manipulation in one place. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Message-Id: <20200316172155.971-7-alex.bennee@linaro.org>
2020-03-06hmp: Fail gracefully if chardev is already in useKevin Wolf1-1/+1
Trying to attach a HMP monitor to a chardev that is already in use results in a crash because monitor_init_hmp() passes &error_abort to qemu_chr_fe_init(): $ ./x86_64-softmmu/qemu-system-x86_64 --chardev stdio,id=foo --mon foo --mon foo QEMU 4.2.50 monitor - type 'help' for more information (qemu) Unexpected error in qemu_chr_fe_init() at chardev/char-fe.c:220: qemu-system-x86_64: --mon foo: Device 'foo' is in use Abgebrochen (Speicherabzug geschrieben) Fix this by allowing monitor_init_hmp() to return an error and passing any error in qemu_chr_fe_init() to its caller instead of aborting. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200224143008.13362-19-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-01-08chardev: Use QEMUChrEvent enum in IOEventHandler typedefPhilippe Mathieu-Daudé1-1/+1
The Chardev events are listed in the QEMUChrEvent enum. By using the enum in the IOEventHandler typedef we: - make the IOEventHandler type more explicit (this handler process out-of-band information, while the IOReadHandler is in-band), - help static code analyzers. This patch was produced with the following spatch script: @match@ expression backend, opaque, context, set_open; identifier fd_can_read, fd_read, fd_event, be_change; @@ qemu_chr_fe_set_handlers(backend, fd_can_read, fd_read, fd_event, be_change, opaque, context, set_open); @depends on match@ identifier opaque, event; identifier match.fd_event; @@ static -void fd_event(void *opaque, int event) +void fd_event(void *opaque, QEMUChrEvent event) { ... } Then the typedef was modified manually in include/chardev/char-fe.h. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Corey Minyard <cminyard@mvista.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20191218172009.8868-15-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-28gdbstub: Fix handler for 'F' packetSandra Loosemore1-2/+6
Handling of the 'F' packet has been broken since commit 4b20fab101b9e2d0fb47454209637a17fc7a13d5, which converted it to use the new packet parsing infrastructure. Per the GDB RSP specification https://sourceware.org/gdb/current/onlinedocs/gdb/The-F-Reply-Packet.html the second parameter may be omitted, but the rewritten implementation was failing to recognize this case. The result was that QEMU was repeatedly resending the fileio request and ignoring GDB's replies of successful completion. This patch restores the behavior of the previous code in allowing the errno parameter to be omitted and passing 0 to the callback in that case. Signed-off-by: Sandra Loosemore <sandra@codesourcery.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20190827223317.8614-1-sandra@codesourcery.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-08-28gdbstub: Fix handling of '!' packet with new infraRamiro Polla1-1/+3
Since the '!' packet is not handled by the new infrastructure, gdb_handle_packet() would call run_cmd_parser() with a NULL cmd_parser value, which would lead to an unsupported packet ("$#00") being sent, which could confuse the gdb client. This also has a side-effect of speeding up the initial connection with gdb. Fixes: 3e2c12615b52 ("gdbstub: Implement deatch (D pkt) with new infra") Signed-off-by: Ramiro Polla <ramiro.polla@gmail.com> Message-Id: <20190805190901.14072-1-ramiro.polla@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-08-16sysemu: Split sysemu/runstate.h off sysemu/sysemu.hMarkus Armbruster1-0/+1
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related to the system-emulator. Evidence: * It's included widely: in my "build everything" tree, changing sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h, down from 5400 due to the previous two commits). * It pulls in more than a dozen additional headers. Split stuff related to run state management into its own header sysemu/runstate.h. Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400 to 4200. Touching new sysemu/runstate.h recompiles some 500 objects. Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also add qemu/main-loop.h. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-30-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> [Unbreak OS-X build]
2019-07-10gdbstub: revert to previous set_reg behaviourAlex Bennée1-6/+12
The refactoring of handle_set_reg missed the fact we previously had responded with an empty packet when we were not using XML based protocols. This broke the fallback behaviour for architectures that don't have registers defined in QEMU's gdb-xml directory. Revert to the previous behaviour and clean up the commentary for what is going on. Fixes: 62b3320bddd Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Cc: Jon Doron <arilou@gmail.com>
2019-07-10gdbstub: add some notes to the header commentAlex Bennée1-0/+6
Add a link to the remote protocol spec and an SPDX tag. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-05general: Replace global smp variables with smp machine propertiesLike Xu1-0/+4
Basically, the context could get the MachineState reference via call chains or unrecommended qdev_get_machine() in !CONFIG_USER_ONLY mode. A local variable of the same name would be introduced in the declaration phase out of less effort OR replace it on the spot if it's only used once in the context. No semantic changes. Signed-off-by: Like Xu <like.xu@linux.intel.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190518205428.90532-4-like.xu@linux.intel.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-06-18monitor: Replace monitor_init() with monitor_init_{hmp, qmp}()Kevin Wolf1-1/+1
Most callers know which monitor type they want to have. Instead of calling monitor_init() with flags that can describe both types of monitors, make monitor_init_{hmp,qmp}() public interfaces that take specific bools instead of flags and call these functions directly. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20190613153405.24769-15-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-06-12gdbstub: Implement qemu physical memory modeJon Doron1-2/+60
Add a new query/set which changes the memory GDB sees to physical memory only. gdb> maint packet qqemu.PhyMemMode will reply the current phy_mem_mode state (1 for enabled, 0 for disabled) gdb> maint packet Qqemu.PhyMemMode:1 Will make GDB read/write only to physical memory, set to 0 to disable Signed-off-by: Jon Doron <arilou@gmail.com> Message-Id: <20190529064148.19856-21-arilou@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-06-12gdbstub: Clear unused variables in gdb_handle_packetJon Doron1-9/+2
Signed-off-by: Jon Doron <arilou@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20190529064148.19856-20-arilou@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-06-12gdbstub: Implement target halted (? pkt) with new infraJon Doron1-10/+25
Note: The user-mode thread-id has been correctly reported since bd88c780e6 Signed-off-by: Jon Doron <arilou@gmail.com> Message-Id: <20190529064148.19856-19-arilou@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-06-12gdbstub: Implement generic set/query (Q/q pkt) with new infraJon Doron1-186/+373
The generic set/query packets contains implementation for varioius sub-commands which are required for GDB and also additional commands which are QEMU specific. To see which QEMU specific commands are available use the command gdb> maintenance packet qqemu.Supported Currently the only implemented QEMU specific command is the command that sets the single step behavior. gdb> maintenance packet qqemu.sstepbits Will display the MASK bits used to control the single stepping. gdb> maintenance packet qqemu.sstep Will display the current value of the mask used when single stepping. gdb> maintenance packet Qqemu.sstep:HEX_VALUE Will change the single step mask. Signed-off-by: Jon Doron <arilou@gmail.com> Message-Id: <20190529064148.19856-18-arilou@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-06-12gdbstub: Implement v commands with new infraJon Doron1-60/+110
Signed-off-by: Jon Doron <arilou@gmail.com> Message-Id: <20190529064148.19856-17-arilou@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-06-12gdbstub: Implement step (s pkt) with new infraJon Doron1-6/+19
Signed-off-by: Jon Doron <arilou@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20190529064148.19856-16-arilou@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-06-12gdbstub: Implement file io (F pkt) with new infraJon Doron1-22/+26
Signed-off-by: Jon Doron <arilou@gmail.com> Message-Id: <20190529064148.19856-15-arilou@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-06-12gdbstub: Implement read all registers (g pkt) with new infraJon Doron1-8/+23
Signed-off-by: Jon Doron <arilou@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20190529064148.19856-14-arilou@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-06-12gdbstub: Implement write all registers (G pkt) with new infraJon Doron1-10/+31
Signed-off-by: Jon Doron <arilou@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20190529064148.19856-13-arilou@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-06-12gdbstub: Implement read memory (m pkt) with new infraJon Doron1-16/+32
Signed-off-by: Jon Doron <arilou@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20190529064148.19856-12-arilou@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-06-12gdbstub: Implement write memory (M pkt) with new infraJon Doron1-18/+33
Signed-off-by: Jon Doron <arilou@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20190529064148.19856-11-arilou@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-06-12gdbstub: Implement get register (p pkt) with new infraJon Doron1-12/+38
Signed-off-by: Jon Doron <arilou@gmail.com> Message-Id: <20190529064148.19856-10-arilou@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-06-12gdbstub: Implement set register (P pkt) with new infraJon Doron1-9/+30
Signed-off-by: Jon Doron <arilou@gmail.com> Message-Id: <20190529064148.19856-9-arilou@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-06-12gdbstub: Implement breakpoint commands (Z/z pkt) with new infraJon Doron1-19/+67
Signed-off-by: Jon Doron <arilou@gmail.com> Message-Id: <20190529064148.19856-8-arilou@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-06-12gdbstub: Implement set_thread (H pkt) with new infraJon Doron1-30/+53
Signed-off-by: Jon Doron <arilou@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20190529064148.19856-7-arilou@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-06-12gdbstub: Implement continue with signal (C pkt) with new infraJon Doron1-5/+29
Signed-off-by: Jon Doron <arilou@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20190529064148.19856-6-arilou@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-06-12gdbstub: Implement continue (c pkt) with new infraJon Doron1-6/+19
Signed-off-by: Jon Doron <arilou@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20190529064148.19856-5-arilou@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-06-12gdbstub: Implement thread_alive (T pkt) with new infraJon Doron1-11/+32
Signed-off-by: Jon Doron <arilou@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20190529064148.19856-4-arilou@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-06-12gdbstub: Implement deatch (D pkt) with new infraJon Doron1-40/+61
Signed-off-by: Jon Doron <arilou@gmail.com> Message-Id: <20190529064148.19856-3-arilou@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-06-12gdbstub: Add infrastructure to parse cmd packetsJon Doron1-0/+195
Signed-off-by: Jon Doron <arilou@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20190529064148.19856-2-arilou@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster1-0/+1
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster1-0/+1
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-06-11qemu-common: Move qemu_isalnum() etc. to qemu/ctype.hMarkus Armbruster1-0/+2
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-3-armbru@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-28semihosting: move semihosting configuration into its own directoryAlex Bennée1-1/+1
In preparation for having some more common semihosting code let's excise the current config magic from vl.c into its own file. We shall later add more conditionals to the build configurations so we can avoid building this if we don't need it. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22gdbstub: Fix misuse of isxdigit()Markus Armbruster1-7/+7
gdb_read_byte() passes its @ch argument to isxdigit(). Undefined behavior when the value is negative. Two callers: * gdb_chr_receive() passes an uint8_t value. Safe. * gdb_handlesig() a char value. Unsafe. Not a security issue, because the characters come from the gdb client, which is trusted. The obvious fix would be casting @ch to unsigned char. But note that gdb_read_byte() already casts @ch to uint8_t in many places. Uses of @ch without such a cast: (1) Compare to a character constant with == or != (2) s->linesum += ch (3) Store ch or ch ^ 0x20 into s->line_buf[] (4) Check for invalid RLE count: ch < ' ' || ch == '#' || ch == '$' || ch > 126 (5) Pass to isxdigit() (6) Pass to fromhex() Change the parameter type from int to uint8_t, and drop the now redundant casts. Affects the above uses as follows: (1) No change: the character constants are all non-negative. (2) Effectively no change: we only ever use s->linesum & 0xff, and s->linesum is int. (3) No change: s->line_buf[] is char[]. (4) No change. (5) Avoid undefined behavior. (6) No change: only reached when isxdigit(ch) Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190514180311.16028-5-armbru@redhat.com>