aboutsummaryrefslogtreecommitdiff
path: root/exec.c
AgeCommit message (Collapse)AuthorFilesLines
2018-12-14Rename cpu_physical_memory_write_rom() to address_space_write_rom()Peter Maydell1-6/+8
The API of cpu_physical_memory_write_rom() is odd, because it takes an AddressSpace, unlike all the other cpu_physical_memory_* access functions. Rename it to address_space_write_rom(), and bring its API into line with address_space_write(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20181122133507.30950-3-peter.maydell@linaro.org
2018-12-14exec.c: Rename cpu_physical_memory_write_rom_internal()Peter Maydell1-7/+13
Rename cpu_physical_memory_write_rom_internal() to address_space_write_rom_internal(), and make it take MemTxAttrs and return a MemTxResult. This brings its API into line with address_space_write(). This is an internal function to exec.c; fixing its API will allow us to change the global function cpu_physical_memory_write_rom(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20181122133507.30950-2-peter.maydell@linaro.org
2018-10-18exec: introduce tlb_initEmilio G. Cota1-0/+1
Paves the way for the addition of a per-TLB lock. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <20181009174557.16125-4-cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-17cpu: Provide a proper prototype for target_words_bigendian() in a headerThomas Huth1-5/+0
We've got three places already that provide a prototype for this function in a .c file - that's ugly. Let's provide a proper prototype in a header instead, with a proper description why this function should not be used in most cases. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-10-02hostmem-file: make available memory-backend-file on POSIX-based hostsHikaru Nishida1-2/+2
Before this change, memory-backend-file object is valid for Linux hosts only because hostmem-file.c is compiled only on Linux hosts. However, other POSIX-based hosts (such as macOS) can support memory-backend-file object in the same way as on Linux hosts. This patch makes hostmem-file.c and related functions to be compiled on all POSIX-based hosts to make available memory-backend-file on them. Signed-off-by: Hikaru Nishida <hikarupsp@gmail.com> Message-Id: <20180924123205.29651-1-hikarupsp@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-21Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell1-25/+13
pc: fixes This includes nvdimm persistence fixes queued before the release. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Mon 20 Aug 2018 11:38:11 BST # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: migration/ram: ensure write persistence on loading all data to PMEM. migration/ram: Add check and info message to nvdimm post copy. mem/nvdimm: ensure write persistence to PMEM in label emulation hostmem-file: add the 'pmem' option configure: add libpmem support memory, exec: switch file ram allocation functions to 'flags' parameters memory, exec: Expose all memory block related flags. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14accel/tcg: Check whether TLB entry is RAM consistently with how we set it upPeter Maydell1-6/+0
We set up TLB entries in tlb_set_page_with_attrs(), where we have some logic for determining whether the TLB entry is considered to be RAM-backed, and thus has a valid addend field. When we look at the TLB entry in get_page_addr_code(), we use different logic for determining whether to treat the page as RAM-backed and use the addend field. This is confusing, and in fact buggy, because the code in tlb_set_page_with_attrs() correctly decides that rom_device memory regions not in romd mode are not RAM-backed, but the code in get_page_addr_code() thinks they are RAM-backed. This typically results in "Bad ram pointer" assertion if the guest tries to execute from such a memory region. Fix this by making get_page_addr_code() just look at the TLB_MMIO bit in the code_address field of the TLB, which tlb_set_page_with_attrs() sets if and only if the addend field is not valid for code execution. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180713150945.12348-1-peter.maydell@linaro.org
2018-08-10hostmem-file: add the 'pmem' optionJunyan He1-0/+8
When QEMU emulates vNVDIMM labels and migrates vNVDIMM devices, it needs to know whether the backend storage is a real persistent memory, in order to decide whether special operations should be performed to ensure the data persistence. This boolean option 'pmem' allows users to specify whether the backend storage of memory-backend-file is a real persistent memory. If 'pmem=on', QEMU will set the flag RAM_PMEM in the RAM block of the corresponding memory region. If 'pmem' is set while lack of libpmem support, a error is generated. Signed-off-by: Junyan He <junyan.he@intel.com> Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-10memory, exec: switch file ram allocation functions to 'flags' parametersJunyan He1-5/+5
As more flag parameters besides the existing 'share' are going to be added to following functions memory_region_init_ram_from_file qemu_ram_alloc_from_fd qemu_ram_alloc_from_file let's switch them to use the 'flags' parameters so as to ease future flag additions. The existing 'share' flag is converted to the RAM_SHARED bit in ram_flags, and other flag bits are ignored by above functions right now. Signed-off-by: Junyan He <junyan.he@intel.com> Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-08-10memory, exec: Expose all memory block related flags.Junyan He1-20/+0
We need to use these flags in other files rather than just in exec.c, For example, RAM_SHARED should be used when create a ram block from file. We expose them the exec/memory.h Signed-off-by: Junyan He <junyan.he@intel.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-07-02tcg: simplify !CONFIG_TCG handling of tb_invalidate_*Paolo Bonzini1-1/+5
There is no need for a stub, since tb_invalidate_phys_addr can be excised altogether when TCG is disabled. This is a bit cleaner since it avoids using code that is clearly specific to user-mode emulation (it calls mmap_lock/unlock) for the !CONFIG_TCG case. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02tcg: Fix --disable-tcg build breakagePhilippe Mathieu-Daudé1-1/+1
Fix the --disable-tcg breakage introduced by 8bca9a03ec60d: $ configure --disable-tcg [...] $ make -C i386-softmmu exec.o make: Entering directory 'i386-softmmu' CC exec.o In file included from source/qemu/exec.c:62:0: source/qemu/include/exec/ram_addr.h:96:6: error: conflicting types for ‘tb_invalidate_phys_range’ void tb_invalidate_phys_range(ram_addr_t start, ram_addr_t end); ^~~~~~~~~~~~~~~~~~~~~~~~ In file included from source/qemu/exec.c:24:0: source/qemu/include/exec/exec-all.h:309:6: note: previous declaration of ‘tb_invalidate_phys_range’ was here void tb_invalidate_phys_range(target_ulong start, target_ulong end); ^~~~~~~~~~~~~~~~~~~~~~~~ source/qemu/exec.c:1043:6: error: conflicting types for ‘tb_invalidate_phys_addr’ void tb_invalidate_phys_addr(AddressSpace *as, hwaddr addr, MemTxAttrs attrs) ^~~~~~~~~~~~~~~~~~~~~~~ In file included from source/qemu/exec.c:24:0: source/qemu/include/exec/exec-all.h:308:6: note: previous declaration of ‘tb_invalidate_phys_addr’ was here void tb_invalidate_phys_addr(target_ulong addr); ^~~~~~~~~~~~~~~~~~~~~~~ make: *** [source/qemu/rules.mak:69: exec.o] Error 1 make: Leaving directory 'i386-softmmu' Tested to build x86_64-softmmu and i386-softmmu targets. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180629200710.27626-1-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-28exec: check that alignment is a power of twoDavid Hildenbrand1-0/+4
Right now we can crash QEMU using e.g. qemu-system-x86_64 -m 256M,maxmem=20G,slots=2 \ -object memory-backend-file,id=mem0,size=12288,mem-path=/dev/zero,align=12288 \ -device pc-dimm,id=dimm1,memdev=mem0 qemu-system-x86_64: util/mmap-alloc.c:115: qemu_ram_mmap: Assertion `is_power_of_2(align)' failed Fix this by adding a proper check. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180607154705.6316-3-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28move public invalidate APIs out of translate-all.{c,h}, clean upPaolo Bonzini1-4/+25
Place them in exec.c, exec-all.h and ram_addr.h. This removes knowledge of translate-all.h (which is an internal header) from several files outside accel/tcg and removes knowledge of AddressSpace from translate-all.c (as it only operates on ram_addr_t). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28exec: Fix MAP_RAM for cached accessEric Auger1-6/+0
When an IOMMUMemoryRegion is in front of a virtio device, address_space_cache_init does not set cache->ptr as the memory region is not RAM. However when the device performs an access, we end up in glue() which performs the translation and then uses MAP_RAM. This latter uses the unset ptr and returns a wrong value which leads to a SIGSEV in address_space_lduw_internal_cached_slow, for instance. In slow path cache->ptr is NULL and MAP_RAM must redirect to qemu_map_ram_ptr((mr)->ram_block, ofs). As MAP_RAM, IS_DIRECT and INVALIDATE are the same in _cached_slow and non cached mode, let's remove those macros. This fixes the use cases featuring vIOMMU (Intel and ARM SMMU) which lead to a SIGSEV. Fixes: 48564041a73a (exec: reintroduce MemoryRegion caching) Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-Id: <1528895946-28677-1-git-send-email-eric.auger@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-27postcopy: drop ram_pages parameter from postcopy_ram_incoming_init()David Hildenbrand1-1/+1
Not needed. Don't expose last_ram_page(). Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180620202736.21399-1-david@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-06-22tcg: fix --disable-tcg build breakageEmilio G. Cota1-0/+3
Fix the --disable-tcg breakage introduced by tb_lock's removal by relying on the fact that tcg_enabled() is set to 0 at compile-time under --disable-tcg. While at it, add further asserts to fix builds that enable both --disable-tcg and --enable-debug, which were broken even before tb_lock's removal. Tested to build x86_64-softmmu and i386-softmmu targets. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-15tcg: remove tb_lockEmilio G. Cota1-15/+11
Use mmap_lock in user-mode to protect TCG state and the page descriptors. In !user-mode, each vCPU has its own TCG state, so no locks needed. Per-page locks are used to protect the page descriptors. Per-TB locks are used in both modes to protect TB jumps. Some notes: - tb_lock is removed from notdirty_mem_write by passing a locked page_collection to tb_invalidate_phys_page_fast. - tcg_tb_lookup/remove/insert/etc have their own internal lock(s), so there is no need to further serialize access to them. - do_tb_flush is run in a safe async context, meaning no other vCPU threads are running. Therefore acquiring mmap_lock there is just to please tools such as thread sanitizer. - Not visible in the diff, but tb_invalidate_phys_page already has an assert_memory_lock. - cpu_io_recompile is !user-only, so no mmap_lock there. - Added mmap_unlock()'s before all siglongjmp's that could be called in user-mode while mmap_lock is held. + Added an assert for !have_mmap_lock() after returning from the longjmp in cpu_exec, just like we do in cpu_exec_step_atomic. Performance numbers before/after: Host: AMD Opteron(tm) Processor 6376 ubuntu 17.04 ppc64 bootup+shutdown time 700 +-+--+----+------+------------+-----------+------------*--+-+ | + + + + + *B | | before ***B*** ** * | |tb lock removal ###D### *** | 600 +-+ *** +-+ | ** # | | *B* #D | | *** * ## | 500 +-+ *** ### +-+ | * *** ### | | *B* # ## | | ** * #D# | 400 +-+ ** ## +-+ | ** ### | | ** ## | | ** # ## | 300 +-+ * B* #D# +-+ | B *** ### | | * ** #### | | * *** ### | 200 +-+ B *B #D# +-+ | #B* * ## # | | #* ## | | + D##D# + + + + | 100 +-+--+----+------+------------+-----------+------------+--+-+ 1 8 16 Guest CPUs 48 64 png: https://imgur.com/HwmBHXe debian jessie aarch64 bootup+shutdown time 90 +-+--+-----+-----+------------+------------+------------+--+-+ | + + + + + + | | before ***B*** B | 80 +tb lock removal ###D### **D +-+ | **### | | **## | 70 +-+ ** # +-+ | ** ## | | ** # | 60 +-+ *B ## +-+ | ** ## | | *** #D | 50 +-+ *** ## +-+ | * ** ### | | **B* ### | 40 +-+ **** # ## +-+ | **** #D# | | ***B** ### | 30 +-+ B***B** #### +-+ | B * * # ### | | B ###D# | 20 +-+ D ##D## +-+ | D# | | + + + + + + | 10 +-+--+-----+-----+------------+------------+------------+--+-+ 1 8 16 Guest CPUs 48 64 png: https://imgur.com/iGpGFtv The gains are high for 4-8 CPUs. Beyond that point, however, unrelated lock contention significantly hurts scalability. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-06-15exec.c: Handle IOMMUs in address_space_translate_for_iotlb()Peter Maydell1-2/+133
Currently we don't support board configurations that put an IOMMU in the path of the CPU's memory transactions, and instead just assert() if the memory region fonud in address_space_translate_for_iotlb() is an IOMMUMemoryRegion. Remove this limitation by having the function handle IOMMUs. This is mostly straightforward, but we must make sure we have a notifier registered for every IOMMU that a transaction has passed through, so that we can flush the TLB appropriately when any of the IOMMUs change their mappings. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20180604152941.20374-5-peter.maydell@linaro.org
2018-06-15iommu: Add IOMMU index argument to translate methodPeter Maydell1-2/+9
Add an IOMMU index argument to the translate method of IOMMUs. Since all of our current IOMMU implementations support only a single IOMMU index, this has no effect on the behaviour. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20180604152941.20374-4-peter.maydell@linaro.org
2018-06-15exec.c: Use stn_p() and ldn_p() instead of explicit switchesPeter Maydell1-104/+8
Now we have stn_p() and ldn_p() we can use them in various functions in exec.c that used to have their own switch-on-size code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180611171007.4165-4-peter.maydell@linaro.org
2018-06-15exec.c: Don't accidentally sign-extend 4-byte loads in subpage_read()Peter Maydell1-1/+1
In subpage_read() we perform a load of the data into a local buffer which we then access using ldub_p(), lduw_p(), ldl_p() or ldq_p() depending on its size, storing the result into the uint64_t *data. Since ldl_p() returns an 'int', this means that for the 4-byte case we will sign-extend the data, whereas for 1 and 2 byte reads we zero-extend it. This ought not to matter since the caller will likely ignore values in the high bytes of the data, but add a cast so that we're consistent. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180611171007.4165-3-peter.maydell@linaro.org
2018-06-15cputlb: Pass cpu_transaction_failed() the correct physaddrPeter Maydell1-2/+3
The API for cpu_transaction_failed() says that it takes the physical address for the failed transaction. However we were actually passing it the offset within the target MemoryRegion. We don't currently have any target CPU implementations of this hook that require the physical address; fix this bug so we don't get confused if we ever do add one. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180611125633.32755-3-peter.maydell@linaro.org
2018-06-04Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20180604' ↵Peter Maydell1-0/+38
into staging migration/next for 20180604 # gpg: Signature made Mon 04 Jun 2018 05:14:24 BST # gpg: using RSA key F487EF185872D723 # gpg: Good signature from "Juan Quintela <quintela@redhat.com>" # gpg: aka "Juan Quintela <quintela@trasno.org>" # Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723 * remotes/juanquintela/tags/migration/20180604: migration: not wait RDMA_CM_EVENT_DISCONNECTED event after rdma_disconnect migration: remove unnecessary variables len in QIOChannelRDMA migration: Don't activate block devices if using -S migration: discard non-migratable RAMBlocks migration: introduce decompress-error-check Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-04migration: discard non-migratable RAMBlocksCédric Le Goater1-0/+38
On the POWER9 processor, the XIVE interrupt controller can control interrupt sources using MMIO to trigger events, to EOI or to turn off the sources. Priority management and interrupt acknowledgment is also controlled by MMIO in the presenter sub-engine. These MMIO regions are exposed to guests in QEMU with a set of 'ram device' memory mappings, similarly to VFIO, and the VMAs are populated dynamically with the appropriate pages using a fault handler. But, these regions are an issue for migration. We need to discard the associated RAMBlocks from the RAM state on the source VM and let the destination VM rebuild the memory mappings on the new host in the post_load() operation just before resuming the system. To achieve this goal, the following introduces a new RAMBlock flag RAM_MIGRATABLE which is updated in the vmstate_register_ram() and vmstate_unregister_ram() routines. This flag is then used by the migration to identify RAMBlocks to discard on the source. Some checks are also performed on the destination to make sure nothing invalid was sent. This change impacts the boston, malta and jazz mips boards for which migration compatibility is broken. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-06-01Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-0/+1
* Linux header upgrade (Peter) * firmware.json definition (Laszlo) * IPMI migration fix (Corey) * QOM improvements (Alexey, Philippe, me) * Memory API cleanups (Jay, me, Tristan, Peter) * WHPX fixes and improvements (Lucian) * Chardev fixes (Marc-André) * IOMMU documentation improvements (Peter) * Coverity fixes (Peter, Philippe) * Include cleanup (Philippe) * -clock deprecation (Thomas) * Disable -sandbox unless CONFIG_SECCOMP (Yi Min Zhao) * Configurability improvements (me) # gpg: Signature made Fri 01 Jun 2018 17:42:13 BST # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (56 commits) hw: make virtio devices configurable via default-configs/ hw: allow compiling out SCSI memory: Make operations using MemoryRegionIoeventfd struct pass by pointer. char: Remove unwanted crlf conversion qdev: Remove DeviceClass::init() and ::exit() qdev: Simplify the SysBusDeviceClass::init path hw/i2c: Use DeviceClass::realize instead of I2CSlaveClass::init hw/i2c/smbus: Use DeviceClass::realize instead of SMBusDeviceClass::init target/i386/kvm.c: Remove compatibility shim for KVM_HINTS_REALTIME Update Linux headers to 4.17-rc6 target/i386/kvm.c: Handle renaming of KVM_HINTS_DEDICATED scripts/update-linux-headers: Handle kernel license no longer being one file scripts/update-linux-headers: Handle __aligned_u64 virtio-gpu-3d: Define VIRTIO_GPU_CAPSET_VIRGL2 elsewhere gdbstub: Prevent fd leakage docs/interop: add "firmware.json" ipmi: Use proper struct reference for KCS vmstate vmstate: Add a VSTRUCT type tcg: remove softfloat from --disable-tcg builds qemu-options: Mark the non-functional -clock option as deprecated ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-01exec.c: Initialize sa_flags passed to sigaction()Peter Maydell1-0/+1
Coverity points out that in the user-only version of cpu_abort() we call sigaction() with a partially initialized struct sigaction (CID 1005351). Correct the omission. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20180515182700.31736-1-peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-31Make address_space_translate_iommu take a MemTxAttrs argumentPeter Maydell1-3/+5
As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to address_space_translate_iommu(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-14-peter.maydell@linaro.org
2018-05-31Make flatview_do_translate() take a MemTxAttrs argumentPeter Maydell1-3/+6
As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to flatview_do_translate(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-13-peter.maydell@linaro.org
2018-05-31Make address_space_get_iotlb_entry() take a MemTxAttrs argumentPeter Maydell1-1/+1
As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to address_space_get_iotlb_entry(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-12-peter.maydell@linaro.org
2018-05-31Make flatview_translate() take a MemTxAttrs argumentPeter Maydell1-8/+9
As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to flatview_translate(); all its callers now have attrs available. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-11-peter.maydell@linaro.org
2018-05-31Make flatview_access_valid() take a MemTxAttrs argumentPeter Maydell1-7/+5
As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to flatview_access_valid(). Its callers now all have an attrs value to hand, so we can correct our earlier temporary use of MEMTXATTRS_UNSPECIFIED. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-10-peter.maydell@linaro.org
2018-05-31Make MemoryRegion valid.accepts callback take a MemTxAttrs argumentPeter Maydell1-3/+6
As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to the MemoryRegion valid.accepts callback. We'll need this for subpage_accepts(). We could take the approach we used with the read and write callbacks and add new a new _with_attrs version, but since there are so few implementations of the accepts hook we just change them all. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-9-peter.maydell@linaro.org
2018-05-31Make memory_region_access_valid() take a MemTxAttrs argumentPeter Maydell1-1/+3
As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to memory_region_access_valid(). Its callers either have an attrs value to hand, or don't care and can use MEMTXATTRS_UNSPECIFIED. The callsite in flatview_access_valid() is part of a recursive loop flatview_access_valid() -> memory_region_access_valid() -> subpage_accepts() -> flatview_access_valid(); we make it pass MEMTXATTRS_UNSPECIFIED for now, until the next several commits have plumbed an attrs parameter through the rest of the loop and we can add an attrs parameter to flatview_access_valid(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-8-peter.maydell@linaro.org
2018-05-31Make flatview_extend_translation() take a MemTxAttrs argumentPeter Maydell1-5/+10
As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to flatview_extend_translation(). Its callers either have an attrs value to hand, or don't care and can use MEMTXATTRS_UNSPECIFIED. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-7-peter.maydell@linaro.org
2018-05-31Make address_space_access_valid() take a MemTxAttrs argumentPeter Maydell1-1/+2
As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to address_space_access_valid(). Its callers either have an attrs value to hand, or don't care and can use MEMTXATTRS_UNSPECIFIED. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-6-peter.maydell@linaro.org
2018-05-31Make address_space_map() take a MemTxAttrs argumentPeter Maydell1-2/+4
As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to address_space_map(). Its callers either have an attrs value to hand, or don't care and can use MEMTXATTRS_UNSPECIFIED. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-5-peter.maydell@linaro.org
2018-05-31Make address_space_translate{, _cached}() take a MemTxAttrs argumentPeter Maydell1-5/+9
As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to address_space_translate() and address_space_translate_cached(). Callers either have an attrs value to hand, or don't care and can use MEMTXATTRS_UNSPECIFIED. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-4-peter.maydell@linaro.org
2018-05-31Make tb_invalidate_phys_addr() take a MemTxAttrs argumentPeter Maydell1-1/+1
As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to tb_invalidate_phys_addr(). Its callers either have an attrs value to hand, or don't care and can use MEMTXATTRS_UNSPECIFIED. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20180521140402.23318-3-peter.maydell@linaro.org
2018-05-09exec: reintroduce MemoryRegion cachingPaolo Bonzini1-12/+109
MemoryRegionCache was reverted to "normal" address_space_* operations for 2.9, due to lack of support for IOMMUs. Reinstate the optimizations, caching only the IOMMU translation at address_cache_init but not the IOMMU lookup and target AddressSpace translation are not cached; now that MemoryRegionCache supports IOMMUs, it becomes more widely applicable too. The inlined fast path is defined in memory_ldst_cached.inc.h, while the slow path uses memory_ldst.inc.c as before. The smaller fast path causes a little code size reduction in MemoryRegionCache users: hw/virtio/virtio.o text size before: 32373 hw/virtio/virtio.o text size after: 31941 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-09exec: extract address_space_translate_iommu, fix page_mask corner casePaolo Bonzini1-35/+75
This will be used to process IOMMUs in a MemoryRegionCache. This includes a small bugfix, in that the returned page_mask is now correctly -1 if the IOMMU memory region maps the entire address space directly. Previously, address_space_get_iotlb_entry would return ~TARGET_PAGE_MASK. Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-09exec: small changes to flatview_do_translatePaolo Bonzini1-19/+14
Prepare for extracting the IOMMU part to a separate function. Mostly cosmetic; the only semantic change is that, if there is more than one cascaded IOMMU and the second one fails to translate, *plen_out is now adjusted according to the page mask of the first IOMMU. Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-04-27Add host_memory_backend_pagesize() helperDavid Gibson1-3/+2
There are a couple places (one generic, one target specific) where we need to get the host page size associated with a particular memory backend. I have some upcoming code which will add another place which wants this. So, for convenience, add a helper function to calculate this. host_memory_backend_pagesize() returns the host pagesize for a given HostMemoryBackend object. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2018-04-27Make qemu_mempath_getpagesize() accept NULLDavid Gibson1-15/+6
qemu_mempath_getpagesize() gets the effective (host side) page size for a block of memory backed by an mmap()ed file on the host. It requires the mem_path parameter to be non-NULL. This ends up meaning all the callers need a different case for handling anonymous memory (for memory-backend-ram or default memory with -mem-path is not specified). We can make all those callers a little simpler by having qemu_mempath_getpagesize() accept NULL, and treat that as the anonymous memory case. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2018-04-02exec: fix memory leak in find_max_supported_pagesize()Greg Kurz1-0/+1
The string returned by object_property_get_str() is dynamically allocated. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <152231458624.69730.1752893648612848392.stgit@bahia.lan> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-03-20Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell1-14/+72
virtio,vhost,pci,pc: features, cleanups SRAT tables for DIMM devices new virtio net flags for speed/duplex post-copy migration support in vhost cleanups in pci Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 20 Mar 2018 14:40:43 GMT # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (51 commits) postcopy shared docs libvhost-user: Claim support for postcopy postcopy: Allow shared memory vhost: Huge page align and merge vhost+postcopy: Wire up POSTCOPY_END notify vhost-user: Add VHOST_USER_POSTCOPY_END message libvhost-user: mprotect & madvises for postcopy vhost+postcopy: Call wakeups vhost+postcopy: Add vhost waker postcopy: postcopy_notify_shared_wake postcopy: helper for waking shared vhost+postcopy: Resolve client address postcopy-ram: add a stub for postcopy_request_shared_page vhost+postcopy: Helper to send requests to source for shared pages vhost+postcopy: Stash RAMBlock and offset vhost+postcopy: Send address back to qemu libvhost-user+postcopy: Register new regions with the ufd migration/ram: ramblock_recv_bitmap_test_byte_offset postcopy+vhost-user: Split set_mem_table for postcopy vhost+postcopy: Transmit 'listen' to slave ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # scripts/update-linux-headers.sh
2018-03-20postcopy: use UFFDIO_ZEROPAGE only when availableDr. David Alan Gilbert1-0/+16
Use a flag on the RAMBlock to state whether it has the UFFDIO_ZEROPAGE capability, use it when it's available. This allows the use of postcopy on tmpfs as well as hugepage backed files. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20qemu_ram_block_host_offsetDr. David Alan Gilbert1-0/+10
Utility to give the offset of a host pointer within a RAMBlock (assuming we already know it's in that RAMBlock) Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20migrate: Update ram_block_discard_range for sharedDr. David Alan Gilbert1-14/+46
The choice of call to discard a block is getting more complicated for other cases. We use fallocate PUNCH_HOLE in any file cases; it works for both hugepage and for tmpfs. We use the DONTNEED for non-hugepage cases either where they're anonymous or where they're private. Care should be taken when trying other backing files. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-19Use cpu_create(type) instead of cpu_init(cpu_model)Igor Mammedov1-0/+23
With all targets defining CPU_RESOLVING_TYPE, refactor cpu_parse_cpu_model(type, cpu_model) to parse_cpu_model(cpu_model) so that callers won't have to know internal resolving cpu type. Place it in exec.c so it could be called from both target independed vl.c and *-user/main.c. That allows us to stop abusing cpu type from MachineClass::default_cpu_type as resolver class in vl.c which were confusing part of cpu_parse_cpu_model(). Also with new parse_cpu_model(), the last users of cpu_init() in null-machine.c and bsd/linux-user targets could be switched to cpu_create() API and cpu_init() API will be removed by follow up patch. With no longer users left remove MachineState::cpu_model field, new code should use MachineState::cpu_type instead and leave cpu_model parsing to generic code in vl.c. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1518000027-274608-5-git-send-email-imammedo@redhat.com> [ehabkost: Fix bsd-user build error] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
generated by cgit v1.1 at 2024-12-29 09:43:49 +0000