aboutsummaryrefslogtreecommitdiff
path: root/docs
AgeCommit message (Collapse)AuthorFilesLines
2017-01-10vhost-user: Add MTU protocol feature and opMaxime Coquelin1-0/+16
This patch implements VHOST_USER_PROTOCOL_F_NET_MTU protocol feature and VHOST_USER_NET_SET_MTU request so that the backend gets notified of the user defined host MTU. If backend supports VHOST_USER_PROTOCOL_F_REPLY_ACK, QEMU assumes MTU is valid if success is returned. Vhost-net driver sends this request through a new vhost_net_set_mtu vhost_ops entry. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Aaron Conole <aconole@redhat.com> Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-01-10doc/pcie: correct command line examplesCao jin1-6/+6
Nit picking: Multi-function PCI Express Root Ports should mean that 'addr' property is mandatory, and slot is optional because it defaults to 0, and 'chassis' is mandatory for 2nd & 3rd root port because it defaults to 0 too. Bonus: fix a typo(2->3) Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-01-06record/replay: add network supportPavel Dovgalyuk1-0/+14
This patch adds support of recording and replaying network packets in irount rr mode. Record and replay for network interactions is performed with the network filter. Each backend must have its own instance of the replay filter as follows: -netdev user,id=net1 -device rtl8139,netdev=net1 -object filter-replay,id=replay,netdev=net1 Replay network filter is used to record and replay network packets. While recording the virtual machine this filter puts all packets coming from the outer world into the log. In replay mode packets from the log are injected into the network device. All interactions with network backend in replay mode are disabled. v5 changes: - using iov_to_buf function instead of loop Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-11-30spec/vhost-user: fix the VHOST_USER prefixWei Wang1-10/+10
Signed-off-by: Wei Wang <wei.w.wang@intel.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-25docs: Specify that cache-clean-interval is only supported in LinuxAlberto Garcia1-2/+3
Make it clear that having Linux is a hard requirement for this feature. Signed-off-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-11-15Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingStefan Hajnoczi3-51/+361
virtio, vhost, pc, pci: documentation, fixes and cleanups Lots of fixes all over the place. Unfortunately, this does not yet fix a regression with vhost introduced by the last pull, the issue is typically this error: kvm_mem_ioeventfd_add: error adding ioeventfd: File exists followed by QEMU aborting. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> * remotes/mst/tags/for_upstream: (28 commits) docs: add PCIe devices placement guidelines virtio: drop virtio_queue_get_ring_{size,addr}() vhost: drop legacy vring layout bits vhost: adapt vhost_verify_ring_mappings() to virtio 1 ring layout nvdimm acpi: introduce NVDIMM_DSM_MEMORY_SIZE nvdimm acpi: use aml_name_decl to define named object nvdimm acpi: rename nvdimm_dsm_reserved_root nvdimm acpi: fix two comments nvdimm acpi: define DSM return codes nvdimm acpi: rename nvdimm_acpi_hotplug nvdimm acpi: cleanup nvdimm_build_fit nvdimm acpi: rename nvdimm_plugged_device_list docs: improve the doc of Read FIT method nvdimm acpi: clean up nvdimm_build_acpi pc: memhp: stop handling nvdimm hotplug in pc_dimm_unplug pc: memhp: move nvdimm hotplug out of memory hotplug nvdimm acpi: drop the lock of fit buffer qdev: hotplug: drop HotplugHandler.post_plug callback vhost: migration blocker only if shared log is used virtio-net: mark VIRTIO_NET_F_GSO as legacy ... Message-id: 1479237527-11846-1-git-send-email-mst@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-15docs: add PCIe devices placement guidelinesMarcel Apfelbaum1-0/+310
Proposes best practices on how to use PCI Express/PCI device in PCI Express based machines and explain the reasoning behind them. Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-15docs: improve the doc of Read FIT methodXiao Guangrong1-49/+47
Improve the description and clearly document the length field Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-15pc: memhp: move nvdimm hotplug out of memory hotplugXiao Guangrong2-3/+5
as they use completely different way to handle hotplug event Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-15Merge remote-tracking branch 'jasowang/tags/net-pull-request' into stagingStefan Hajnoczi1-35/+37
# gpg: Signature made Tue 15 Nov 2016 07:37:27 AM GMT # gpg: using RSA key 0xEF04965B398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * jasowang/tags/net-pull-request: docs: fix COLO architecture diagram net: fix sending of data with -net socket, listen backend net: skip virtio-net config of deleted nic's peers Message-id: 1479195830-4725-1-git-send-email-jasowang@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-15docs: fix COLO architecture diagramZhang Chen1-35/+37
Fix COLO-Proxy part of COLO architecture diagram Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-11-14block/curl: Drop TFTP "support"Max Reitz1-1/+1
Because TFTP does not support byte ranges, it was never usable with our curl block driver. Since apparently nobody has ever complained loudly enough for someone to take care of the issue until now, it seems reasonable to assume that nobody has ever actually used it. Therefore, it should be safe to just drop it from curl's protocol list. [Jeff Cody: Below is additional summary pulled, with some rewording, from followup emails between Max and Markus, to explain what worked and what didn't] TFTP would sometimes work, to a limited extent, for images <= the curl "readahead" size, so long as reads started at offset zero. By default, that readahead size is 256KB. Reads starting at a non-zero offset would also have returned data from a zero offset. It can become more complicated still, with mixed reads at zero offset and non-zero offsets, due to data buffering. In short, TFTP could only have worked before in very specific scenarios with unrealistic expectations and constraints. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-id: 20161102175539.4375-4-mreitz@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-11-08docs/tracing.txt: Update documentation of default backendPeter Maydell1-2/+5
In commit baf86d6b3c we switched the default trace backend from "nop" to "log". Update the documentation to match. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1478276837-31780-1-git-send-email-peter.maydell@linaro.org Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-03Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingStefan Hajnoczi1-1/+1
* NBD bugfix (Changlong) * NBD write zeroes support (Eric) * Memory backend fixes (Haozhong) * Atomics fix (Alex) * New AVX512 features (Luwei) * "make check" logging fix (Paolo) * Chardev refactoring fallout (Paolo) * Small checkpatch improvements (Paolo, Jeff) # gpg: Signature made Wed 02 Nov 2016 08:31:11 AM GMT # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (30 commits) main-loop: Suppress I/O thread warning under qtest docs/rcu.txt: Fix minor typo vl: exit qemu on guest panic if -no-shutdown is not set checkpatch: allow spaces before parenthesis for 'coroutine_fn' x86: add AVX512_4VNNIW and AVX512_4FMAPS features slirp: fix CharDriver breakage qemu-char: do not forward events through the mux until QEMU has started nbd: Implement NBD_CMD_WRITE_ZEROES on client nbd: Implement NBD_CMD_WRITE_ZEROES on server nbd: Improve server handling of shutdown requests nbd: Refactor conversion to errno to silence checkpatch nbd: Support shorter handshake nbd: Less allocation during NBD_OPT_LIST nbd: Let client skip portions of server reply nbd: Let server know when client gives up negotiation nbd: Share common option-sending code in client nbd: Send message along with server NBD_REP_ERR errors nbd: Share common reply-sending code in server nbd: Rename struct nbd_request and nbd_reply nbd: Rename NbdClientSession to NBDClientSession ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-03Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingStefan Hajnoczi2-3/+58
virtio, pc: fixes and features nvdimm hotplug support virtio migration and ioeventfd rework virtio crypto device ipmi fixes Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 01 Nov 2016 05:23:40 PM GMT # gpg: using RSA key 0x281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (47 commits) acpi: fix assert failure caused by commit 35c5a52d acpi/ipmi: Initialize the fwinfo before fetching it ipmi: Add graceful shutdown handling to the external BMC ipmi: fix build config variable name for ipmi_bmc_extern.o ipmi: Implement shutdown via ACPI overtemp ipmi: chassis poweroff should use qemu_system_shutdown_request() ipmi_bmc_sim: Remove an unnecessary mutex ipmi: Remove hotplug from IPMI BMCs pc: memhp: enable nvdimm device hotplug nvdimm acpi: introduce _FIT nvdimm acpi: introduce fit buffer nvdimm acpi: prebuild nvdimm devices for available slots nvdimm acpi: use common macros instead of magic names acpi nvdimm: rename result_size to dsm_out_buf_siz nvdimm acpi: compile nvdimm acpi code arch-independently acpi nvdimm: fix Arg6 usage acpi nvdimm: fix ARG3 conflict acpi nvdimm: fix device physical address base acpi nvdimm: fix OperationRegion definition acpi nvdimm: fix wrong buffer size returned by DSM method ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-02docs/rcu.txt: Fix minor typoPranith Kumar1-1/+1
s/presented/prevented/ Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Message-Id: <20161018050418.4912-1-bobby.prani@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-11-01pc: memhp: enable nvdimm device hotplugXiao Guangrong1-0/+3
_GPE.E04 is dedicated for nvdimm device hotplug Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01nvdimm acpi: introduce _FITXiao Guangrong1-3/+55
_FIT is required for hotplug support, guest will inquire the updated device info from it if a hotplug event is received As FIT buffer is not completely mapped into guest address space, so a new function, Read FIT whose UUID is UUID 648B9CF2-CDA1-4312-8AD9-49C4AF32BD62, handle 0x10000, function index is 0x1, is reserved by QEMU to read the piece of FIT buffer. The buffer is concatenated before _FIT return Refer to docs/specs/acpi-nvdimm.txt for detailed design Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-31block: Add 'base-node' parameter to the 'block-stream' commandAlberto Garcia1-2/+5
The way to specify the node from which to copy data in the block-stream operation is by using the 'base' parameter. This parameter however takes a file name, not a node name. Since we want to be able to perform this operation using only node names, this patch adds a new 'base-node' parameter. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-10-31docs: Document how to stream to an intermediate layerAlberto Garcia1-11/+25
Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-10-31Merge remote-tracking branch 'remotes/amit-migration/tags/migration-for-2.8' ↵Peter Maydell2-1/+205
into staging Migration bits from the COLO project # gpg: Signature made Sun 30 Oct 2016 10:39:55 GMT # gpg: using RSA key 0xEB0B4DFC657EF670 # gpg: Good signature from "Amit Shah <amit@amitshah.net>" # gpg: aka "Amit Shah <amit@kernel.org>" # gpg: aka "Amit Shah <amitshah@gmx.net>" # Primary key fingerprint: 48CA 3722 5FE7 F4A8 B337 2735 1E9A 3B5F 8540 83B6 # Subkey fingerprint: CC63 D332 AB8F 4617 4529 6534 EB0B 4DFC 657E F670 * remotes/amit-migration/tags/migration-for-2.8: MAINTAINERS: Add maintainer for COLO framework related files configure: Support enable/disable COLO feature docs: Add documentation for COLO feature COLO: Implement failover work for secondary VM COLO: Implement the process of failover for primary VM COLO: Introduce state to record failover process COLO: Add 'x-colo-lost-heartbeat' command to trigger failover COLO: Synchronize PVM's state to SVM periodically COLO: Add checkpoint-delay parameter for migrate-set-parameters COLO: Load VMState into QIOChannelBuffer before restore it COLO: Send PVM state to secondary side when do checkpoint COLO: Add a new RunState RUN_STATE_COLO COLO: Introduce checkpointing protocol COLO: Establish a new communicating path for COLO migration: Switch to COLO process after finishing loadvm migration: Enter into COLO mode after migration if COLO is enabled COLO: migrate COLO related info to secondary node migration: Introduce capability 'x-colo' to migration Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-31Merge remote-tracking branch 'remotes/famz/tags/for-upstream' into stagingPeter Maydell1-17/+23
# gpg: Signature made Fri 28 Oct 2016 15:47:39 BST # gpg: using RSA key 0xCA35624C6A9171C6 # gpg: Good signature from "Fam Zheng <famz@redhat.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6 * remotes/famz/tags/for-upstream: aio: convert from RFifoLock to QemuRecMutex qemu-thread: introduce QemuRecMutex iothread: release AioContext around aio_poll block: only call aio_poll on the current thread's AioContext qemu-img: call aio_context_acquire/release around block job qemu-io: acquire AioContext block: prepare bdrv_reopen_multiple to release AioContext replication: pass BlockDriverState to reopen_backing_file iothread: detach all block devices before stopping them aio: introduce qemu_get_current_aio_context sheepdog: use BDRV_POLL_WHILE nfs: use BDRV_POLL_WHILE nfs: move nfs_set_events out of the while loops block: introduce BDRV_POLL_WHILE qed: Implement .bdrv_drain block: change drain to look only at one child at a time block: add BDS field to count in-flight requests mirror: use bdrv_drained_begin/bdrv_drained_end blockjob: introduce .drain callback for jobs replication: interrupt failover if the main device is closed Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-30docs: Add documentation for COLO featurezhanghailiang1-0/+189
Introduce the design of COLO, and how to test it. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30COLO: Add 'x-colo-lost-heartbeat' command to trigger failoverzhanghailiang1-0/+10
We leave users to choose whatever heartbeat solution they want, if the heartbeat is lost, or other errors they detect, they can use experimental command 'x_colo_lost_heartbeat' to tell COLO to do failover, COLO will do operations accordingly. For example, if the command is sent to the Primary side, the Primary side will exit COLO mode, does cleanup work, and then, PVM will take over the service work. If sent to the Secondary side, the Secondary side will run failover work, then takes over PVM's service work. Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30COLO: Add checkpoint-delay parameter for migrate-set-parameterszhanghailiang1-0/+2
Add checkpoint-delay parameter for migrate-set-parameters, so that we can control the checkpoint frequency when COLO is in periodic mode. Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30migration: Introduce capability 'x-colo' to migrationzhanghailiang1-1/+4
We add helper function colo_supported() to indicate whether colo is supported or not, with which we use to control whether or not showing 'x-colo' string to users, they can use qmp command 'query-migrate-capabilities' or hmp command 'info migrate_capabilities' to learn if colo is supported. The default value for COLO (COarse-Grain LOck Stepping) is disabled. Cc: Juan Quintela <quintela@redhat.com> Cc: Amit Shah <amit.shah@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-28iothread: release AioContext around aio_pollPaolo Bonzini1-17/+23
This is the first step towards having fine-grained critical sections in dataplane threads, which will resolve lock ordering problems between address_space_* functions (which need the BQL when doing MMIO, even after we complete RCU-based dispatch) and the AioContext. Because AioContext does not use contention callbacks anymore, the unit test has to be changed. Previously applied as a0710f7995f914e3044e5899bd8ff6c43c62f916 and then reverted. Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1477565348-5458-19-git-send-email-pbonzini@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2016-10-28spapr: update spapr hotplug documentationMichael Roth1-9/+46
This updates the existing documentation to reflect recent updates to the hotplug event structure, which are in draft form but slated for inclusion in PAPR/LoPAPR. Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-25qapi: rename QmpOutputVisitor to QObjectOutputVisitorDaniel P. Berrange1-1/+1
The QmpOutputVisitor has no direct dependency on QMP. It is valid to use it anywhere that one wants a QObject. Rename it to better reflect its functionality as a generic QAPI to QObject converter. The commit before previous renamed the files, this one renames C identifiers. Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1475246744-29302-6-git-send-email-berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Split into file rename and identifier rename] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-10-25qapi: rename QmpInputVisitor to QObjectInputVisitorDaniel P. Berrange1-1/+1
The QmpInputVisitor has no direct dependency on QMP. It is valid to use it anywhere that one has a QObject. Rename it to better reflect its functionality as a generic QObject to QAPI converter. The previous commit renamed the files, this one renames C identifiers. Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1475246744-29302-5-git-send-email-berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Straightforwardly rebased, split into file and identifier rename] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-10-24block: Remove "options" indirection from blockdev-addKevin Wolf1-45/+39
Now that QAPI supports boxed types, we can have unions at the top level of a command, so let's put our real options directly there for blockdev-add instead of having a single "options" dict that contains the real arguments. blockdev-add is still experimental and we already made substantial changes to the API recently, so we're free to make changes like this one, too. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-10-24atomic: base mb_read/mb_set on load-acquire and store-releasePaolo Bonzini1-2/+3
This introduces load-acquire and store-release operations in QEMU. For now, just use them as an implementation detail of atomic_mb_read and atomic_mb_set. Since docs/atomics.txt documents that atomic_mb_read only synchronizes with an atomic_mb_set of the same variable, we can use the new implementation everywhere instead of seq-cst loads and stores. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24atomic: introduce smp_mb_acquire and smp_mb_releasePaolo Bonzini1-32/+47
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-17docs/generic-loader: Update the documentAlistair Francis1-7/+15
This patch does three things: - It adds a list of restrictions and ToDos - It corrects the header --- lines to match the length of the header - It clarifies the force-raw option Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: e75d1d285cf8f45037c41ebe1bc3f68120f09cb9.1475702918.git.alistair.francis@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-13docs/xbzrle: correctionCao jin1-2/+2
1. Default cache size is 64MB. 2. Semantics correction. Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2016-10-13migrate: move max-bandwidth and downtime-limit to migrate_set_parameterAshijeet Acharya1-3/+10
Mark the old commands 'migrate_set_speed' and 'migrate_set_downtime' as deprecated. Move max-bandwidth and downtime-limit into migrate-set-parameters for setting maximum migration speed and expected downtime limit parameters respectively. Change downtime units to milliseconds (only for new-command) and set its upper bound limit to 2000 seconds. Update the query part in both hmp and qmp qemu control interfaces. Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2016-10-10Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell2-2/+15
Block layer patches # gpg: Signature made Mon 10 Oct 2016 12:33:14 BST # gpg: using RSA key 0x7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: dmg: Move libbz2 code to dmg-bz2.so module: Don't load the same module if requested multiple times scripts: Allow block module to not define BlockDriver block: Add qdev ID to DEVICE_TRAY_MOVED block-backend: Remember if attached device is non-qdev block: Add node name to BLOCK_IO_ERROR event block: Add bdrv_runtime_opts to query-command-line-options block: use aio_bh_schedule_oneshot async: add aio_bh_schedule_oneshot block: use bdrv_add_before_write_notifier Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-10Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2016-10-07' into ↵Peter Maydell3-4/+4
staging QAPI patches for 2016-10-07 # gpg: Signature made Fri 07 Oct 2016 18:55:40 BST # gpg: using RSA key 0x3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-qapi-2016-10-07: docs: Belatedly update for move of QMP/* to docs/ docs: Belatedly update for move of qmp-commands.txt qmp: Disable query-cpu-* commands when they're unavailable MAINTAINERS: Pass the QObject staff from Luiz to Markus MAINTAINERS: Pass the HMP staff from Luiz to David qapi: return a 'missing parameter' error qapi: assert list entry has a value qapi: add assert about root value tests/test-qmp-input-strict: Cover missing struct members qapi: Fix crash when 'any' or 'null' parameter is missing qmp: fix object-add assert() without props Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-10Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-1/+6
* Thread Sanitizer fixes (Alex) * Coverity fixes (David) * test-qht fixes (Emilio) * QOM interface for info irq/info pic (Hervé) * -rtc clock=rt fix (Junlian) * mux chardev fixes (Marc-André) * nicer report on death by signal (Michal) * qemu-tech TLC (Paolo) * MSI support for edu device (Peter) * qemu-nbd --offset fix (Tomáš) # gpg: Signature made Fri 07 Oct 2016 17:25:10 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (39 commits) qemu-doc: merge qemu-tech and qemu-doc qemu-tech: rewrite some parts qemu-tech: reorganize content qemu-tech: move TCG test documentation to tests/tcg/README qemu-tech: move user mode emulation features from qemu-tech qemu-tech: document lazy condition code evaluation in cpu.h qemu-tech: move text from qemu-tech to tcg/README qemu-doc: drop installation and compilation notes qemu-doc: replace introduction with the one from the internals manual qemu-tech: drop index test-qht: perform lookups under rcu_read_lock qht: fix unlock-after-free segfault upon resizing qht: simplify qht_reset_size qemu-nbd: Shrink image size by specified offset qemu_kill_report: Report PID name too util: Introduce qemu_get_pid_name char: update read handler in all cases char: use a fixed idx for child muxed chr i8259: give ISA device when registering ISA ioports .travis.yml: add gcc sanitizer build ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-07docs: Belatedly update for move of QMP/* to docs/Markus Armbruster2-3/+3
Missed in commit 7537fe0 and commit 9b89b6a. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1475766600-7273-1-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-10-07docs: Belatedly update for move of qmp-commands.txtMarkus Armbruster1-1/+1
Missed in commit d076a2a and commit bd6092e. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1474546563-16332-1-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2016-10-07block: Add qdev ID to DEVICE_TRAY_MOVEDKevin Wolf2-1/+8
The event currently only contains the BlockBackend name. However, with anonymous BlockBackends, this is always the empty string. Add the qdev ID (or if none was given, the QOM path) so that the user can still see which device caused the event. Event generation has to be moved from bdrv_eject() to the BlockBackend because the BDS doesn't know the attached device, but that's easy because blk_eject() is the only user of it. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-10-07block: Add node name to BLOCK_IO_ERROR eventKevin Wolf1-1/+7
The event currently only contains the BlockBackend name. However, with anonymous BlockBackends, this is always the empty string. Add the node name so that the user can still see which block device caused the event. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-10-04docs: Add a generic loader explanation documentAlistair Francis1-0/+84
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 9d991a2df990cf55e2630410a5a03ea48930af5d.1475195078.git.alistair.francis@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04hw/misc/edu: support MSI interruptPeter Xu1-1/+6
So now edu device can support both line or msi interrupt, depending on how user configures it. Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1475067819-21413-1-git-send-email-peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-28Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-0/+225
* thread-safe tb_flush (Fred, Alex, Sergey, me, Richard, Emilio,... :-) * license clarification for compiler.h (Felipe) * glib cflags improvement (Marc-André) * checkpatch silencing (Paolo) * SMRAM migration fix (Paolo) * Replay improvements (Pavel) * IOMMU notifier improvements (Peter) * IOAPIC now defaults to version 0x20 (Peter) # gpg: Signature made Tue 27 Sep 2016 10:57:40 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (28 commits) replay: allow replay stopping and restarting replay: vmstate for replay module replay: move internal data to the structure cpus-common: lock-free fast path for cpu_exec_start/end tcg: Make tb_flush() thread safe cpus-common: Introduce async_safe_run_on_cpu() cpus-common: simplify locking for start_exclusive/end_exclusive cpus-common: remove redundant call to exclusive_idle() cpus-common: always defer async_run_on_cpu work items docs: include formal model for TCG exclusive sections cpus-common: move exclusive work infrastructure from linux-user cpus-common: fix uninitialized variable use in run_on_cpu cpus-common: move CPU work item management to common code cpus-common: move CPU list management to common code linux-user: Add qemu_cpu_is_self() and qemu_cpu_kick() linux-user: Use QemuMutex and QemuCond cpus: Rename flush_queued_work() cpus: Move common code out of {async_, }run_on_cpu() cpus: pass CPUState to run_on_cpu helpers build-sys: put glib_cflags in QEMU_CFLAGS ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-27cpus-common: lock-free fast path for cpu_exec_start/endPaolo Bonzini1-3/+50
Set cpu->running without taking the cpu_list lock, only requiring it if there is a concurrent exclusive section. This requires adding a new field to CPUState, which records whether a running CPU is being counted in pending_cpus. When an exclusive section is started concurrently with cpu_exec_start, cpu_exec_start can use the new field to determine if it has to wait for the end of the exclusive section. Likewise, cpu_exec_end can use it to see if start_exclusive is waiting for that CPU. This a separate patch for easier bisection of issues. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-27cpus-common: simplify locking for start_exclusive/end_exclusivePaolo Bonzini1-1/+3
It is not necessary to hold qemu_cpu_list_mutex throughout the exclusive section, because no other exclusive section can run while pending_cpus != 0. exclusive_idle() is called in cpu_exec_start(), and that prevents any CPUs created after start_exclusive() from entering cpu_exec() during an exclusive section. Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-27cpus-common: remove redundant call to exclusive_idle()Paolo Bonzini1-1/+0
No need to call exclusive_idle() from cpu_exec_end since it is done immediately afterwards in cpu_exec_start. Any exclusive section could run as soon as cpu_exec_end leaves, because cpu->running is false and the mutex is not taken, so the call does not add any protection either. Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-27docs: include formal model for TCG exclusive sectionsPaolo Bonzini1-0/+177
Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2024-11-02 14:02:17 +0000