aboutsummaryrefslogtreecommitdiff
path: root/docs/system
AgeCommit message (Collapse)AuthorFilesLines
2023-07-10hw/riscv/virt: Restrict ACLINT to TCGPhilippe Mathieu-Daudé1-0/+1
The Advanced Core Local Interruptor (ACLINT) device can only be used with TCG. Check for TCG enabled instead of KVM being not. Only add the property when TCG is used. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230629121103.87733-3-philmd@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-07-07ppc/pnv: SMT support for powernvNicholas Piggin1-5/+0
Set the TIR default value with the SMT thread index, and place some standard limits on SMT configurations. Now powernv is able to boot skiboot and Linux with a SMT topology, including booting a KVM guest. There are several SPRs and other features (e.g., broadcast msgsnd) that are not implemented, but not used by OPAL or Linux and can be added incrementally. Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Message-ID: <20230705120631.27670-4-npiggin@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-07-06target/arm: Define neoverse-v1Peter Maydell1-0/+1
Now that we have implemented support for FEAT_LSE2, we can define a CPU model for the Neoverse-V1, and enable it for the virt and sbsa-ref boards. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230704130647.2842917-3-peter.maydell@linaro.org Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2023-07-04hw/arm/sbsa-ref: use XHCI to replace EHCIYuquan Wang1-1/+4
The current sbsa-ref cannot use EHCI controller which is only able to do 32-bit DMA, since sbsa-ref doesn't have RAM below 4GB. Hence, this uses XHCI to provide a usb controller with 64-bit DMA capablity instead of EHCI. We bump the platform version to 0.3 with this change. Although the hardware at the USB controller address changes, the firmware and Linux can both cope with this -- on an older non-XHCI-aware firmware/kernel setup the probe routine simply fails and the guest proceeds without any USB. (This isn't a loss of functionality, because the old USB controller never worked in the first place.) So we can call this a backwards-compatible change and only bump the minor version. Signed-off-by: Yuquan Wang <wangyuquan1236@phytium.com.cn> Message-id: 20230621103847.447508-2-wangyuquan1236@phytium.com.cn [PMM: tweaked commit message; add line to docs about what changes in platform version 0.3] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-07-03docs: Document security implications of debuggingIlya Leoshkevich1-0/+15
Now that the GDB stub explicitly implements reading host files (note that it was already possible by changing the emulated code to open and read those files), concerns may arise that it undermines security. Document the status quo, which is that the users are already responsible for securing the GDB connection themselves. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230621203627.1808446-8-iii@linux.ibm.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230630180423.558337-38-alex.bennee@linaro.org>
2023-06-28Merge tag 'qemu-sparc-20230628' of https://github.com/mcayland/qemu into stagingRichard Henderson3-1/+131
qemu-sparc queue # -----BEGIN PGP SIGNATURE----- # # iQFSBAABCgA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAmScHBkeHG1hcmsuY2F2 # ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIfuZ8H/3KjLLCaGcO3jnus # P/ky3wGYx9aah/iNfRDgaaGRkPX18Eabq0BidUt/DN28yQmKgnOcbCwHlIt4QdCt # PeO9hRNLpCop63LwyQQTrSZEdVZP75CX6dRcN+6h5TsY66/ESZjBsivuJGVHIU6O # L8zJv2KKg0SKtJHsPGkUppmfyM4btmGTerqSJHv1SJfy4DJdzRMF83/WOZtE5srm # YvpgZsiztBpHbG/+jLn2mX7iaQiZQCCs+weU0ynszr5WENAnuJderjO+mo0DZkqD # j+R6LMcHHj6I4uP68eJowdTezOpoZNROh/gdUozCweA1AC/8RotkJa9UcBeEplY/ # +wV8mts= # =ga0/ # -----END PGP SIGNATURE----- # gpg: Signature made Wed 28 Jun 2023 01:40:09 PM CEST # gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F # gpg: issuer "mark.cave-ayland@ilande.co.uk" # gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F * tag 'qemu-sparc-20230628' of https://github.com/mcayland/qemu: escc: emulate dip switch language layout settings on SUN keyboard target/sparc: Use tcg_gen_lookup_and_goto_ptr for v9 WRASI target/sparc: Use DYNAMIC_PC_LOOKUP for v9 RETURN target/sparc: Use DYNAMIC_PC_LOOKUP for JMPL target/sparc: Use DYNAMIC_PC_LOOKUP for conditional branches target/sparc: Introduce DYNAMIC_PC_LOOKUP target/sparc: Drop inline markers from translate.c target/sparc: Fix npc comparison in sparc_tr_insn_start target/sparc: Use tcg_gen_lookup_and_goto_ptr in gen_goto_tb Revert "hw/sparc64/niagara: Use blk_name() instead of open-coding it" Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-28escc: emulate dip switch language layout settings on SUN keyboardHenrik Carlqvist3-1/+131
SUN Type 4, 5 and 5c keyboards have dip switches to choose the language layout of the keyboard. Solaris makes an ioctl to query the value of the dipswitches and uses that value to select keyboard layout. Also the SUN bios like the one in the file ss5.bin uses this value to support at least some keyboard layouts. However, the OpenBIOS provided with qemu is hardcoded to always use an US keyboard layout. Before this patch, qemu allways gave dip switch value 0x21 (US keyboard), this patch uses a command line switch like "-global escc.chnA-sunkbd-layout=de" to select dip switch value. A table is used to lookup values from arguments like: -global escc.chnA-sunkbd-layout=fr -global escc.chnA-sunkbd-layout=es But the patch also accepts numeric dip switch values directly: -global escc.chnA-sunkbd-layout=0x2b -global escc.chnA-sunkbd-layout=43 Both values above are the same and select swedish keyboard as explained in table 3-15 at https://docs.oracle.com/cd/E19683-01/806-6642/new-43/index.html Unless you want to do a full Solaris installation but happen to have access to a Sun bios file, the easiest way to test that the patch works is to: qemu-system-sparc -global escc.chnA-sunkbd-layout=sv -bios /path/to/ss5.bin If you already happen to have a Solaris installation in a qemu disk image file you can easily try different keyboard layouts after this patch is applied. Signed-off-by: Henrik Carlqvist <hc1245@poolhem.se> Message-Id: <20230623203007.56d3d182.hc981@poolhem.se> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> [MCA edit: update unsigned char to uint8_t, fix spacing issues] Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2023-06-28docs: update hw/nvme documentation for TP4146Klaus Jensen1-1/+36
Update documentation for TP4146 ("Flexible Data Placement") emulation. Reviewed-by: Jesper Wendel Devantier <j.devantier@samsung.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
2023-06-23hw/arm/sbsa-ref: add ITS support in SBSA GICShashi Mallela1-0/+14
Create ITS as part of SBSA platform GIC initialization. GIC ITS information is in DeviceTree so TF-A can pass it to EDK2. Bumping platform version to 0.2 as this is important hardware change. Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org> Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Message-id: 20230619170913.517373-2-marcin.juszkiewicz@linaro.org Co-authored-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-23docs/system/arm: Document FEAT_RMERichard Henderson2-0/+24
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20230622143046.1578160-1-richard.henderson@linaro.org [PMM: fixed typo; note experimental status in emulation.rst too] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-19docs: sbsa: document board to firmware interfaceMarcin Juszkiewicz1-7/+31
We plan to add more hardware information into DeviceTree to limit amount of hardcoded values in firmware. Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Message-id: 20230531171834.236569-1-marcin.juszkiewicz@linaro.org [PMM: fix format nits, add text about platform version fields from a comment in the C source file] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-16Merge tag 'xenpvh5-tag' of https://gitlab.com/sstabellini/qemu into stagingRichard Henderson2-0/+35
xenpvh5 # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCgAdFiEE0E4zq6UfZ7oH0wrqiU+PSHDhrpAFAmSLo0QACgkQiU+PSHDh # rpB1Gw/9H5Cx7wQZVyKfFwnyOoP2QTedCISxC0HL5qFmUGcJY21gXaJZ10JaU/HM # zHEJj2M17EgVCTkZVqZeKuj+nzyjbRKatT3YmFqKqFNNt5M1yQxC9BfVgso4PND/ # SY0/8BvqumgJEqD3sf76KbQAILKwahPtA42LTM7S7r2ZsmQpvmOpdOhCVugpnqs/ # FheP8N6hdlZ7GnRGtXv9QnKxMVThuE3mRCUWCyYsV/Roz6uvPsvskrdSeC3LzzBd # Ewq56vB+qQg+WbNTgK2BcVOzV/89k9tjWsUnamfhjD2lUxfHrne1FBclhKMcHhUv # T53zjhxjlRfmzUxC4917Krt4Tw/AaDW7v1pn6RokUq5U059Wb8q0IjzL75FOeD3o # e9DNp+RR8py44ejfi2WHR7jqayMPVIO86uJ3usshiZ9YgK5efFAtlwN/KNR5JX8k # Y1BR9O8BebtRymljtiLWUFXlu3xywGSA23KotT7XtzXKEaTZkIHdI395YKksYPkG # pil0C0bh5ZW3ZWd4M/CNcVOb69R53p15O77mjmKtjnkQYJAPD6Kbc9thZ1zdWwPR # ivFPdiTJb0FElS0ywZwezKYRKXje6E9ejXgAzgFuZI/rFdeO0HfkifiNoro1NAxK # g4V+LE5oPt09GpL2nuHrh/y9g9MnLlXyNBhPV0CRelU6fPKIk1w= # =543t # -----END PGP SIGNATURE----- # gpg: Signature made Fri 16 Jun 2023 01:48:20 AM CEST # gpg: using RSA key D04E33ABA51F67BA07D30AEA894F8F4870E1AE90 # gpg: Good signature from "Stefano Stabellini <sstabellini@kernel.org>" [unknown] # gpg: aka "Stefano Stabellini <stefano.stabellini@eu.citrix.com>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: D04E 33AB A51F 67BA 07D3 0AEA 894F 8F48 70E1 AE90 * tag 'xenpvh5-tag' of https://gitlab.com/sstabellini/qemu: test/qtest: add xepvh to skip list for qtest meson.build: enable xenpv machine build for ARM hw/arm: introduce xenpvh machine meson.build: do not set have_xen_pci_passthrough for aarch64 targets hw/xen/xen-hvm-common: Use g_new and error_report hw/xen/xen-hvm-common: skip ioreq creation on ioreq registration failure include/hw/xen/xen_common: return error from xen_create_ioreq_server xen-hvm: reorganize xen-hvm and move common function to xen-hvm-common hw/i386/xen/xen-hvm: move x86-specific fields out of XenIOState hw/i386/xen: rearrange xen_hvm_init_pc hw/i386/xen/: move xen-mapcache.c to hw/xen/ Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-15hw/arm: introduce xenpvh machineVikram Garhwal2-0/+35
Add a new machine xenpvh which creates a IOREQ server to register/connect with Xen Hypervisor. Optional: When CONFIG_TPM is enabled, it also creates a tpm-tis-device, adds a TPM emulator and connects to swtpm running on host machine via chardev socket and support TPM functionalities for a guest domain. Extra command line for aarch64 xenpvh QEMU to connect to swtpm: -chardev socket,id=chrtpm,path=/tmp/myvtpm2/swtpm-sock \ -tpmdev emulator,id=tpm0,chardev=chrtpm \ -machine tpm-base-addr=0x0c000000 \ swtpm implements a TPM software emulator(TPM 1.2 & TPM 2) built on libtpms and provides access to TPM functionality over socket, chardev and CUSE interface. Github repo: https://github.com/stefanberger/swtpm Example for starting swtpm on host machine: mkdir /tmp/vtpm2 swtpm socket --tpmstate dir=/tmp/vtpm2 \ --ctrl type=unixio,path=/tmp/vtpm2/swtpm-sock & Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2023-06-15aspeed: Introduce a "bmc-console" machine optionCédric Le Goater1-0/+11
Most of the Aspeed machines use the UART5 device for the boot console, and QEMU connects the first serial Chardev to this SoC device for this purpose. See routine connect_serial_hds_to_uarts(). Nevertheless, some machines use another boot console, such as the fuji, and commit 5d63d0c76c ("hw/arm/aspeed: Allow machine to set UART default") introduced a SoC class attribute 'uart_default' and property to be able to change the boot console device. It was later changed by commit d2b3eaefb4 ("aspeed: Refactor UART init for multi-SoC machines"). The "bmc-console" machine option goes a step further and lets the user define the UART device from the QEMU command line without introducing a new machine definition. For instance, to use device UART3 (mapped on /dev/ttyS2 under Linux) instead of the default UART5, one would use : -M ast2500-evb,bmc-console=uart3 Cc: Abhishek Singh Dagur <abhishek@drut.io> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-06-13docs/system: riscv: Add pflash usage detailsSunil V L1-0/+31
pflash devices can be used in virt machine for different purposes like for ROM code or S-mode FW payload. Add a section in the documentation on how to use pflash devices for different purposes. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230601045910.18646-4-sunilvl@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-09docs: Fix trivial typos in vhost-user.rstMilan Zamazal1-2/+2
Signed-off-by: Milan Zamazal <mzamazal@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-06-07docs: fix multi-process QEMU documentationJagannathan Raman1-1/+1
Fix a typo in the system documentation for multi-process QEMU. Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-06-06target/arm: Enable FEAT_LSE2 for -cpu maxRichard Henderson1-0/+1
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230530191438.411344-21-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06docs: system: arm: Introduce bananapi_m2uqianfan Zhao2-0/+140
Add documents for Banana Pi M2U Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> [PMM: Minor format fixes to correct sphinx errors] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06xlnx-versal: Connect Xilinx VERSAL CANFD controllersVikram Garhwal1-0/+31
Connect CANFD0 and CANFD1 on the Versal-virt machine and update xlnx-versal-virt document with CANFD command line examples. Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-05-30docs: sbsa: correct graphics card nameMarcin Juszkiewicz1-1/+1
We moved from VGA to Bochs to have PCIe card. Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-05-23docs/system/devices/igb: Note igb is tested for DPDKAkihiko Odaki1-5/+7
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23Fix references to igb Avocado testAkihiko Odaki1-1/+1
Fixes: 9f95111474 ("tests/avocado: re-factor igb test to avoid timeouts") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-19hw/cxl: Multi-Region CXL Type-3 Devices (Volatile and Persistent)Gregory Price1-10/+39
This commit enables each CXL Type-3 device to contain one volatile memory region and one persistent region. Two new properties have been added to cxl-type3 device initialization: [volatile-memdev] and [persistent-memdev] The existing [memdev] property has been deprecated and will default the memory region to a persistent memory region (although a user may assign the region to a ram or file backed region). It cannot be used in combination with the new [persistent-memdev] property. Partitioning volatile memory from persistent memory is not yet supported. Volatile memory is mapped at DPA(0x0), while Persistent memory is mapped at DPA(vmem->size), per CXL Spec 8.2.9.8.2.0 - Get Partition Info. Signed-off-by: Gregory Price <gregory.price@memverge.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Reviewed-by: Fan Ni <fan.ni@samsung.com> Tested-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230421160827.2227-4-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-05-19docs/cxl: Replace unsupported AARCH64 with x86_64Raghu H1-3/+3
Currently Qemu CXL emulation support is not availabe on AARCH64 but its available with qemu x86_64 architecture, updating the document to reflect the supported platform. Signed-off-by: Raghu H <raghuhack78@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230421134507.26842-4-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-05-19docs/cxl: Remove incorrect CXL type 3 size parameterRaghu H1-4/+4
cxl-type3 memory size is read directly from the provided memory backed end device. Remove non existent size option Signed-off-by: Raghu H <raghuhack78@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230421134507.26842-3-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-05-19docs/cxl: fix some typosBrice Goglin1-4/+4
Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230421134507.26842-2-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-05-18docs: Convert u2f.txt to rSTPeter Maydell3-1/+95
Convert the u2f.txt file to rST, and place it in the right place in our manual layout. The old text didn't fit very well into our manual style, so the new version ends up looking like a rewrite, although some of the original text is preserved: * the 'building' section of the old file is removed, since we generally assume that users have already built QEMU * some rather verbose text has been cut back * document the passthrough device first, on the assumption that's most likely to be of interest to users * cut back on the duplication of text between sections * format example command lines etc with rST As it's a short document it seemed simplest to do this all in one go rather than try to do a minimal syntactic conversion and then clean up the wording and layout. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20230421163734.1152076-1-peter.maydell@linaro.org
2023-05-15docs/zoned-storage: add zoned device documentationSam Li1-0/+6
Add the documentation about the zoned device support to virtio-blk emulation. Signed-off-by: Sam Li <faithilikerun@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Acked-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20230508045533.175575-9-faithilikerun@gmail.com Message-id: 20230324090605.28361-9-faithilikerun@gmail.com [Add index-api.rst to fix "zoned-storage.rst:document isn't included in any toctree" error and fix pre-formatted code syntax. --Stefan] Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-05-12docs: Remove unused weirdly-named cross-reference targetsPeter Maydell7-12/+4
In the doc sources, we have a few cross-reference targets with odd names "pcsys_005fxyz". These are the legacy of the semi-automated conversion of the old info docs to rST (the '005f' is because ASCII 0x5f is '_' and the old info link names had underscores in them). Remove the targets which nothing links to, and rename the two targets which are used to something a bit more descriptive. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230421163642.1151904-1-peter.maydell@linaro.org Reviewed-by: Markus Armbruster <armbru@redhat.com>
2023-05-10docs: document breakpoint and watchpoint supportAlex Bennée1-0/+22
This varies by accelerator. Also mention the modern bear trap that is ASLR. Message-Id: <20230503091244.1450613-4-alex.bennee@linaro.org> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2023-04-27docs/system: remove excessive punctuation from guest-loader docsAlex Bennée1-3/+3
A possessive its needs no ' whereas the contraction of it is does. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20230424092249.58552-16-alex.bennee@linaro.org>
2023-04-21Merge tag 'pull-request-2023-04-20' of https://gitlab.com/thuth/qemu into ↵Richard Henderson2-2/+2
staging * Compat machines for version 8.1 * Allow setting a chardev input file on the command line * Fix .travis.yml to work with non-public Travis instances, too * Move a lot of code from specifc_ss into softmmu_ss * Add a test case for TPM TIS I2C connected to Aspeed I2C controller * Update tests/vm/freebsd to version 13 * Some more misc minor fixes here and there # -----BEGIN PGP SIGNATURE----- # # iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmRBDtMRHHRodXRoQHJl # ZGhhdC5jb20ACgkQLtnXdP5wLbXfjw//UYytlyZsDOLAMfFNGQViMmVf29KbrDRe # doDh4Nl1oZLNKm9C5XlQExhsRbLm6Hi9nyQvSCJs4CvZ1jBY6U7GfgMNIaozXWb3 # 4gQyJb9ACe/z8bQmPUVF2sdW1QZ9zpf8LWpCOTGUZiI2Tevzkz7b/F5ZxiQiseG6 # dXe8UIwdZhG4jz2+6viqjHiGlKoBkegGYoJthcwnR07aRz2woiNr7rKRiJEiv2G7 # UfMVB96uLkpEhaDoohz440/rjviazO1nt6HDvgEajXT1X5P/8phT9IvT7olAZXZH # R2Qm6YyYcSWavoPms3AryAWG8FjomcyBjuebfAVW5/x+fl/401sn9quBMoZrYPEX # dfzF64vVokdXNQEH6+qc95PdB6/+d0CZPY8ilMRtAttf2sMw7IgqhG3zDLbj9t6R # dns2/DY9zu2pp07IEAXn/iVbW4rl2HADUQncr6B/cPy++lYiFvv7LX8OE+YWOsk0 # gvxzYx6rRhr5j7xT1sP30pLwsG3mX7qRDfba1Bt19CzSbu7UGN+w+S1xclgZDoqE # 0AZIeVUuqqNTEoBLoa2xHUDGs9NjeI2+qIh0R5csS/bqDscLXj0cOluvJO48n4Rt # +SGQSCSmU/lxn6EbBz4tw3orlp0clBH9fEaSg9lYxuUTYvQOpdYS7u4d63VQFvzp # dwQ9LRDFNsA= # =8ZFL # -----END PGP SIGNATURE----- # gpg: Signature made Thu 20 Apr 2023 11:07:15 AM BST # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [undefined] # gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * tag 'pull-request-2023-04-20' of https://gitlab.com/thuth/qemu: (23 commits) tests/vm/freebsd: Update to FreeBSD 13.2 qtest: Add a test case for TPM TIS I2C connected to Aspeed I2C controller qtest: Move tpm_util_tis_transmit() into tpm-tis-utils.c and rename it qtest: Add functions for accessing devices on Aspeed I2C controller MAINTAINERS: Add Juan Quintela to developer guides review cpu: Remove parameter of list_cpus() hw/core: Move numa.c into the target independent source set softmmu: Move dirtylimit.c into the target independent source set hw/display: Compile vga.c as target-independent code softmmu: Make qtest.c target independent include/exec: Provide the tswap() functions for target independent code, too softmmu/qtest: Move the target-specific pseries RTAS code out of qtest.c hw/char: Move two more files from specific_ss to softmmu_ss target/i386: Set family/model/stepping of the "max" CPU according to LM bit tests/migration: Only run auto_converge in slow mode travis.yml: Add missing 'flex', 'bison' packages to 'GCC (user)' job travis.yml: Add missing clang-10 package to the 'Clang (disable-tcg)' job chardev: Allow setting file chardev input file on the command line qtest: Don't assert on "-qtest chardev:myid" test: Fix test-crypto-secret when compiling without keyring support ... Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-04-20target/arm: Implement FEAT_PAN3Peter Maydell1-0/+1
FEAT_PAN3 adds an EPAN bit to SCTLR_EL1 and SCTLR_EL2, which allows the PAN bit to make memory non-privileged-read/write if it is user-executable as well as if it is user-read/write. Implement this feature and enable it in the AArch64 'max' CPU. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230331145045.2584941-4-peter.maydell@linaro.org
2023-04-20hw/arm: Add WDT to Allwinner-H3 and Orangepi-PCStrahinja Jankovic1-0/+1
This patch adds WDT to Allwinner-H3 and Orangepi-PC. WDT is added as an overlay to the Timer module memory area. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20230326202256.22980-4-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-04-20hw/arm: Add WDT to Allwinner-A10 and CubieboardStrahinja Jankovic1-0/+1
This patch adds WDT to Allwinner-A10 and Cubieboard. WDT is added as an overlay to the Timer module memory map. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20230326202256.22980-3-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-04-20docs/cxl: Fix sentenceStefan Weil1-1/+1
Signed-off-by: Stefan Weil <sw@weilnetz.de> Message-Id: <20230409201828.1159568-1-sw@weilnetz.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-04-20docs: Fix typo (wphx => whpx)Stefan Weil1-1/+1
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1529 Signed-off-by: Stefan Weil <sw@weilnetz.de> Message-Id: <20230409201007.1157671-1-sw@weilnetz.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-03-21docs/system/arm/cpu-features.rst: Fix formattingPeter Maydell1-42/+34
The markup for the Arm CPU feature documentation is incorrect, and results in the HTML not rendering correctly -- the first line of each description is rendered in boldface as if it were part of the option name. Reformat to match the styling used in cpu-models-x86.rst.inc. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1479 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230316105808.1414003-1-peter.maydell@linaro.org Reviewed-by: Cornelia Huck <cohuck@redhat.com>
2023-03-10docs/system/devices/igb: Add igb documentationAkihiko Odaki2-0/+72
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-03-09Merge tag 'xenfv-2' of git://git.infradead.org/users/dwmw2/qemu into stagingPeter Maydell1-7/+23
Enable PV backends with Xen/KVM emulation This is phase 2, following on from the basic platform support which was already merged. • Add a simple single-tenant internal XenStore implementation • Indirect Xen gnttab/evtchn/foreignmem/xenstore through operations table • Provide emulated back ends for Xen operations • Header cleanups to allow PV back ends to build without Xen itself • Enable PV back ends in emulated mode • Documentation update Tested-by: Paul Durrant <paul@xen.org> ... on real Xen (master branch, 4.18) with a Debian guest. # -----BEGIN PGP SIGNATURE----- # # iQJGBAABCgAwFiEEMUsIrNDeSBEzpfKGm+mA/QrAFUQFAmQHu3wSHGR3bXdAYW1h # em9uLmNvLnVrAAoJEJvpgP0KwBVE5LYP/0VodDsQdP7Z4L+/IzgBSgEec7qmyQFB # KlBZS/PmvCZKb0DHLI3GhXIyzD+/fnLtGSRl0rYObnKP7im+MpEDGmn97f6nIITk # AzkdsVhNEBQFXCkLgQ9y8kTrTmsod9O4sqn0+naa2TX4FPcRN0MaNmpuLEubvaRS # +JuyHmwy9ZeeAnsU31uJ0nx4F1hW9IDaatNoDeFcFnKCXQp36rtdZUViMowUJvwu # Q+Xyg6dybusznaoiXd485tTPrTt+FK/wEARse3q2gRh9QblLu0r5BFb0rOfhYCTQ # jw+5lBsOX+UlffmB9IDakRpVe4RKhvvRQSkRvYkPCshsqud9zMGhaquKg1vKBgca # I31XSN0LCcon/ahHGtmVAxyZUpWdEnfzO1TbTNpz9oacROklgVgEYdw5Vwca71VD # SURl6uCt9Jb9WmsR4twus4i4qDjQIDOtOF0hcxpl7HGktkxlGxUVI4qVLXARtVCS # OTB6N0LlhJ2woj2wYK5BRTiOj03T2MkJEWaYhDdIrQREKWe2Sn4xTOH5kGbQQnOr # km93odjBZFRHsAUnzXHXW3+yHjMefH7KrHePbmvsO4foGF77bBxosuC2ehFfvNJ0 # VM/H04NDtPYCBwdAr545PSN/q+WzEPQaquLZ0UuTBuPpMMOYd+Ff8YvQWJPyCM18 # 1mq9v6Xe9RQZ # =JGLX # -----END PGP SIGNATURE----- # gpg: Signature made Tue 07 Mar 2023 22:32:28 GMT # gpg: using RSA key 314B08ACD0DE481133A5F2869BE980FD0AC01544 # gpg: issuer "dwmw@amazon.co.uk" # gpg: Good signature from "David Woodhouse <dwmw@amazon.co.uk>" [unknown] # gpg: aka "David Woodhouse <dwmw@amazon.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 314B 08AC D0DE 4811 33A5 F286 9BE9 80FD 0AC0 1544 * tag 'xenfv-2' of git://git.infradead.org/users/dwmw2/qemu: (27 commits) docs: Update Xen-on-KVM documentation for PV disk support MAINTAINERS: Add entry for Xen on KVM emulation i386/xen: Initialize Xen backends from pc_basic_device_init() for emulation hw/xen: Implement soft reset for emulated gnttab hw/xen: Map guest XENSTORE_PFN grant in emulated Xenstore hw/xen: Add emulated implementation of XenStore operations hw/xen: Add emulated implementation of grant table operations hw/xen: Hook up emulated implementation for event channel operations hw/xen: Only advertise ring-page-order for xen-block if gnttab supports it hw/xen: Avoid crash when backend watch fires too early hw/xen: Build PV backend drivers for CONFIG_XEN_BUS hw/xen: Rename xen_common.h to xen_native.h hw/xen: Use XEN_PAGE_SIZE in PV backend drivers hw/xen: Move xenstore_store_pv_console_info to xen_console.c hw/xen: Add xenstore operations to allow redirection to internal emulation hw/xen: Add foreignmem operations to allow redirection to internal emulation hw/xen: Pass grant ref to gnttab unmap operation hw/xen: Add gnttab operations to allow redirection to internal emulation hw/xen: Add evtchn operations to allow redirection to internal emulation hw/xen: Create initial XenStore nodes ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-03-07docs/system: Remove "mips" board from target-mips.rstJiaxun Yang1-14/+0
This board had been removed long ago in commit f169413c27 ("hw/mips: Remove the 'r4k' machine") Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230202132138.30945-2-jiaxun.yang@flygoat.com> [PMD: Mention commit f169413c27] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-03-07docs: Update Xen-on-KVM documentation for PV disk supportDavid Woodhouse1-7/+23
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
2023-03-03Merge tag 'pull-aspeed-20230302' of https://github.com/legoater/qemu into ↵Peter Maydell1-0/+2
staging aspeed queue: * fix for the Aspeed I2C slave mode * a new I2C echo device from Klaus and its associated test in avocado. * initial SoC cleanups to allow the use of block devices instead of drives on the command line. * new facebook machines and eeprom fixes for the Fuji * readline fix # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmQAnrQACgkQUaNDx8/7 # 7KGIvQ//Te2eSxlZNxAXHb3HSVFRaBW+2EkJzNlalX75olFSzCLe8BnAHK5xPlYv # JjU0aPjWaPohPLdbNbAsJY2B8AwMGbUTjSv+ORRWF6s97LTVD9WcAYHgOTCz6d2X # ZrArJ5msEQAFEySOLmBqTcuyW3t4w8XeII+B09HZIS8Gn3F9kX5+4JCw9E4sX8fS # n9ayclMmrXCPbkGA4bfwJp3KI1Tc/WXNRyG0AmPEmepid7ECr5tVvQoXRMF1Sy/D # 10qbHEcmQXvZDy85M2ED1niOac4oU+EY8Wvjzkgc36uXcjqf0jIUfw56cwGSNVkW # MhPXSMiH4tEjgxmtzld3LeA6TGfrFcCvRXYiCuYWHjBS3gptlqY6Q0580vxoQVXL # lTYui57LB1YStNLcLG9toP0d4/fRfeqEx7ddCQKlopnW/K392eoJo0aYoVGVJhIC # 3QhN525EFUwMm4FDpdSW29Gfbk/ytpf0u4hQ6JPeBl8psirRKqCGuwr5NOnPYTaN # yErlsq2eL83t9kLo+2YIqgWic85wNP3kqAjIaE6lminqX7sWFH3V1g9HqUQZVG1g # msatZMiCCvwSFuz3DPkSfnuhqwaHuhvCATZloCtguCmnbUK9qUVVzvodKw62sZrd # GdS2XvRNyoOwezz0tDEvPipyZ7RpcaatryHNuzGwRsE5Lvr73dg= # =ExnJ # -----END PGP SIGNATURE----- # gpg: Signature made Thu 02 Mar 2023 13:03:48 GMT # gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1 # gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1 * tag 'pull-aspeed-20230302' of https://github.com/legoater/qemu: aspeed/smc: Replace SysBus IRQs with GPIO lines aspeed: Add a boot_rom overlap region in the SoC spi_boot container aspeed: Introduce a spi_boot region under the SoC aspeed/fuji : correct the eeprom size hw/at24c : modify at24c to support 1 byte address mode hw/arm/aspeed: Adding new machine Tiogapass in QEMU hw/arm/aspeed: Adding new machine Yosemitev2 in QEMU tests/avocado/machine_aspeed.py: Add an I2C slave test hw/misc: add a toy i2c echo device hw/i2c: only schedule pending master when bus is idle readline: fix hmp completion issue Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-03-03Merge tag 'pull-loongarch-20230303' of https://gitlab.com/gaosong/qemu into ↵Peter Maydell1-59/+38
staging pull-loongarch-20230303 # -----BEGIN PGP SIGNATURE----- # # iLMEAAEIAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZAFb5wAKCRBAov/yOSY+ # 35hmA/sHIGXU5zQV6p6DBILFGEE6x91sPtV8WKY3zujVY0hsfD4SF6bKTaKJYisZ # EztZZ5/EunQcu/vfgO46YtYysEWzrzGiinbZ5lAjxk6sdlBYlfcTQLAQEEW3zPbP # qB3SiiGmGQ0iYFHIlkyi1tCF5OEmqqQKrHYrNVk6cGBoJle2PA== # =giPH # -----END PGP SIGNATURE----- # gpg: Signature made Fri 03 Mar 2023 02:31:03 GMT # gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF # gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF * tag 'pull-loongarch-20230303' of https://gitlab.com/gaosong/qemu: hw/loongarch/virt: add system_powerdown hmp command support target/loongarch: Implement Chip Configuraiton Version Register(0x0000) docs/system/loongarch: update loongson3.rst and rename it to virt.rst loongarch: Add smbios command line option. hw/loongarch/virt: rename PCH_PIC_IRQ_OFFSET with VIRT_GSI_BASE Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-03-03docs/system/loongarch: update loongson3.rst and rename it to virt.rstSong Gao1-59/+38
Since the EDK2 had already support LoongArch, update build bios, and update cpu type, cross-tools. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Song Gao <gaosong@loongson.cn> Message-Id: <20230227035905.1290953-1-gaosong@loongson.cn>
2023-03-02hw/arm/aspeed: Adding new machine Tiogapass in QEMUKarthikeyan Pasupathi1-0/+1
This patch support Tiogapass in QEMU environment. and introduced EEPROM BMC FRU data support "add tiogapass_bmc_fruid data" along with the machine support. Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> [ clg: - commit log topic update - checkpatch issues - Documentation update ] Message-Id: <20230216184342.253868-1-pkarthikeyan1509@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-03-02hw/arm/aspeed: Adding new machine Yosemitev2 in QEMUKarthikeyan Pasupathi1-0/+1
This patch support Yosemitev2 in QEMU environment. and introduced EEPROM BMC FRU data support "add fbyv2_bmc_fruid data" along with the machine support. Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> [ clg: - commit log topic update - Documentation update ] Message-Id: <20230216133326.216017-1-pkarthikeyan1509@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-03-01i386/xen: Document Xen HVM emulationDavid Woodhouse2-0/+77
Signed-off-by: David Woodhouse <dwmw2@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
2023-02-16hw/arm: Attach PSPI module to NPCM7XX SoCHao Wu1-1/+1
Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Titus Rwantare <titusr@google.com> Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Message-id: 20230208235433.3989937-4-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>