aboutsummaryrefslogtreecommitdiff
path: root/disas
AgeCommit message (Collapse)AuthorFilesLines
2021-05-12Drop the deprecated lm32 targetMarkus Armbruster2-362/+0
Target lm32 was deprecated in commit d8498005122, v5.2.0. See there for rationale. Some of its code lives on in device models derived from milkymist ones: hw/char/digic-uart.c and hw/display/bcm2835_fb.c. Cc: Michael Walle <michael@walle.cc> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210503084034.3804963-2-armbru@redhat.com> Acked-by: Michael Walle <michael@walle.cc> [Trivial conflicts resolved, reST markup fixed]
2021-05-12Remove the deprecated moxie targetThomas Huth2-361/+0
There are no known users of this CPU anymore, and there are no binaries available online which could be used for regression tests, so the code has likely completely bit-rotten already. It's been marked as deprecated since two releases now and nobody spoke up that there is still a need to keep it, thus let's remove it now. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210430160355.698194-1-thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [Commit message typos fixed, trivial conflicts resolved] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2021-05-10include/disas/dis-asm.h: Handle being included outside 'extern "C"'Peter Maydell2-4/+0
Make dis-asm.h handle being included outside an 'extern "C"' block; this allows us to remove the 'extern "C"' blocks that our two C++ files that include it are using. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2021-04-17osdep: protect qemu/osdep.h with extern "C"Paolo Bonzini2-2/+2
System headers may include templates if compiled with a C++ compiler, which cause the compiler to complain if qemu/osdep.h is included within a C++ source file's 'extern "C"' block. Add an 'extern "C"' block directly to qemu/osdep.h, so that system headers can be kept out of it. There is a stray declaration early in qemu/osdep.h, which needs to be special cased. Add a definition in qemu/compiler.h to make it look nice. config-host.h, CONFIG_TARGET, exec/poison.h and qemu/compiler.h are included outside the 'extern "C"' block; that is not an issue because they consist entirely of preprocessor directives. This allows us to move the include of osdep.h in our two C++ source files outside the extern "C" block they were previously using for it, which in turn means that they compile successfully against newer versions of glib which insist that glib.h is *not* inside an extern "C" block. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210416135543.20382-3-peter.maydell@linaro.org [PMM: Moved disas/arm-a64.cc osdep.h include out of its extern "C" block; explained in commit message why we're doing this] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-17tcg/tci: Implement the disassembler properlyRichard Henderson1-61/+0
Actually print arguments as opposed to simply the opcodes and, uselessly, the argument counts. Reuse all of the helpers developed as part of the interpreter. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-03-09Various spelling fixesMichael Tokarev1-1/+1
An assorted set of spelling fixes in various places. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20210309111510.79495-1-mjt@msgid.tls.msk.ru> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-02-18Hexagon (disas) disassemblerTaylor Simpson2-0/+66
Add hexagon to disas/meson.build Add disas/hexagon.c Add hexagon to include/disas/dis-asm.h Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1612763186-18161-6-git-send-email-tsimpson@quicinc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-01-21build-system: clean up TCG/TCI configuryPaolo Bonzini1-2/+0
Make CONFIG_TCG_INTERPRETER a Meson option, and enable TCI (though with a warning) if the host CPU is unsupported, making it more similar to other --enable-* options. Remove TCG-specific include paths from !CONFIG_TCG builds. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07disas: Push const down through host disassemblyRichard Henderson1-1/+1
Reviewed-by: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-12-18disas/libvixl: Fix fall-through annotation for GCC >= 7Thomas Huth2-2/+8
For compiling with -Wimplicit-fallthrough we need to fix the fallthrough annotations in the libvixl code. This is based on the following upstream vixl commit by Martyn Capewell: https://git.linaro.org/arm/vixl.git/commit/?id=de326f850f736c3a337 "GCC 7 enables switch/case fallthrough checking, but this fails in VIXL, because the annotation we use is Clang specific. Also, fix a missing annotation in the disassembler." Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20201211152426.350966-2-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-11-15nomaintainer: Fix Lesser GPL version numberChetan Pant1-1/+1
There is no "version 2" of the "Lesser" General Public License. It is either "GPL version 2.0" or "Lesser GPL version 2.1". This patch replaces all occurrences of "Lesser GPL version 2" with "Lesser GPL version 2.1" in comment section. This patch contains all the files, whose maintainer I could not get from ‘get_maintainer.pl’ script. Signed-off-by: Chetan Pant <chetan4windows@gmail.com> Message-Id: <20201023124424.20177-1-chetan4windows@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> [thuth: Adapted exec.c and qdev-monitor.c to new location] Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-11-02disas/capstone: Fix monitor disassembly of >32 bytesPeter Maydell1-1/+1
If we're using the capstone disassembler, disassembly of a run of instructions more than 32 bytes long disassembles the wrong data for instructions beyond the 32 byte mark: (qemu) xp /16x 0x100 0000000000000100: 0x00000005 0x54410001 0x00000001 0x00001000 0000000000000110: 0x00000000 0x00000004 0x54410002 0x3c000000 0000000000000120: 0x00000000 0x00000004 0x54410009 0x74736574 0000000000000130: 0x00000000 0x00000000 0x00000000 0x00000000 (qemu) xp /16i 0x100 0x00000100: 00000005 andeq r0, r0, r5 0x00000104: 54410001 strbpl r0, [r1], #-1 0x00000108: 00000001 andeq r0, r0, r1 0x0000010c: 00001000 andeq r1, r0, r0 0x00000110: 00000000 andeq r0, r0, r0 0x00000114: 00000004 andeq r0, r0, r4 0x00000118: 54410002 strbpl r0, [r1], #-2 0x0000011c: 3c000000 .byte 0x00, 0x00, 0x00, 0x3c 0x00000120: 54410001 strbpl r0, [r1], #-1 0x00000124: 00000001 andeq r0, r0, r1 0x00000128: 00001000 andeq r1, r0, r0 0x0000012c: 00000000 andeq r0, r0, r0 0x00000130: 00000004 andeq r0, r0, r4 0x00000134: 54410002 strbpl r0, [r1], #-2 0x00000138: 3c000000 .byte 0x00, 0x00, 0x00, 0x3c 0x0000013c: 00000000 andeq r0, r0, r0 Here the disassembly of 0x120..0x13f is using the data that is in 0x104..0x123. This is caused by passing the wrong value to the read_memory_func(). The intention is that at this point in the loop the 'cap_buf' buffer already contains 'csize' bytes of data for the instruction at guest addr 'pc', and we want to read in an extra 'tsize' bytes. Those extra bytes are therefore at 'pc + csize', not 'pc'. On the first time through the loop 'csize' happens to be zero, so the initial read of 32 bytes into cap_buf is correct and as long as the disassembly never needs to read more data we return the correct information. Use the correct guest address in the call to read_memory_func(). Cc: qemu-stable@nongnu.org Fixes: https://bugs.launchpad.net/qemu/+bug/1900779 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201022132445.25039-1-peter.maydell@linaro.org
2020-10-03disas/capstone: Add skipdata hook for s390xRichard Henderson1-1/+41
It is always possible to tell the length of an insn, even if the actual insn is unknown. Skip the correct number of bytes, so that we stay in sync with the instruction stream. Acked-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-10-03disas: Split out capstone code to disas/capstone.cRichard Henderson2-0/+287
There is nothing target-specific about this code, so it can be added to common_ss. This also requires that the base capstone dependency be added to common_ss, so that we get the correct include paths added to CFLAGS. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-09-17disas/: fix some comment spelling errorszhaolichang3-6/+6
I found that there are many spelling errors in the comments of qemu, so I used the spellcheck tool to check the spelling errors and finally found some spelling errors in the disas folder. Signed-off-by: zhaolichang <zhaolichang@huawei.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20200917075029.313-9-zhaolichang@huawei.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-08configure: move disassembler configuration to mesonPaolo Bonzini1-3/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21meson: convert disas directory to MesonMarc-André Lureau4-35/+34
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-13disas/sh4: Add missing fallthrough annotationsThomas Huth1-0/+2
Add fallthrough annotations to be able to compile the code without warnings with -Wimplicit-fallthrough. Looking at the code, it seems like the fallthrough is indeed intended here, so the comments should be appropriate. Message-Id: <20200630055953.9309-1-thuth@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-01-29target/mips: Add implementation of GINVT instructionYongbok Kim1-0/+10
Implement emulation of GINVT instruction. As QEMU doesn't support caches and virtualization, this implementation covers only one instruction (GINVT - Global Invalidate TLB) among all TLB-related MIPS instructions. Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <1579883929-1517-5-git-send-email-aleksandar.markovic@rt-rk.com>
2019-12-17libvixl: remove per-target compiler flagsPaolo Bonzini1-10/+1
We are already including -D__STDC_LIMIT_MACROS in the global CXXFLAGS, so it makes sense to do the same for -D__STDC_CONSTANT_MACROS and -D__STDC_FORMAT_MACROS instead of limiting that to libvixl. The -Wno-sign-compare option can also be removed since GCC 4.6 is not supported anymore. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-04cris: do not leak struct cris_disasm_dataPaolo Bonzini1-30/+29
Use a stack-allocated struct to avoid a memory leak. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-21ppc: Add support for 'mffsl' instructionPaul A. Clarke1-0/+5
ISA 3.0B added a set of Floating-Point Status and Control Register (FPSCR) instructions: mffsce, mffscdrn, mffscdrni, mffscrn, mffscrni, mffsl. This patch adds support for 'mffsl'. 'mffsl' is identical to 'mffs', except it only returns mode, status, and enable bits from the FPSCR. On CPUs without support for 'mffsl' (below ISA 3.0), the 'mffsl' instruction will execute identically to 'mffs'. Note: I renamed FPSCR_RN to FPSCR_RN0 so I could create an FPSCR_RN mask which is both bits of the FPSCR rounding mode, as defined in the ISA. I also fixed a typo in the definition of FPSCR_FR. Signed-off-by: Paul A. Clarke <pc@us.ibm.com> v4: - nit: added some braces to resolve a checkpatch complaint. v3: - Changed tcg_gen_and_i64 to tcg_gen_andi_i64, eliminating the need for a temporary, per review from Richard Henderson. v2: - I found that I copied too much of the 'mffs' implementation. The 'Rc' condition code bits are not needed for 'mffsl'. Removed. - I now free the (renamed) 'tmask' temporary. - I now bail early for older ISA to the original 'mffs' implementation. Message-Id: <1565982203-11048-1-git-send-email-pc@us.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-06-27disas/riscv: Fix `rdinstreth` constraintWladimir J. van der Laan1-2/+3
The constraint for `rdinstreth` was comparing the csr number to 0xc80, which is `cycleh` instead. Fix this. Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com> Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-06-27disas/riscv: Disassemble reserved compressed encodings as illegalMichael Clark1-17/+45
Due to the design of the disassembler, the immediate is not known during decoding of the opcode; so to handle compressed encodings with reserved immediate values (non-zero), we need to add an additional check during decompression to match reserved encodings with zero immediates and translate them into the illegal instruction. The following compressed opcodes have reserved encodings with zero immediates: c.addi4spn, c.addi, c.lui, c.addi16sp, c.srli, c.srai, c.andi and c.slli Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> [Palmer: Broke long lines] Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster3-3/+0
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2019-05-13Clean up header guards that don't match their file nameMarkus Armbruster1-2/+2
Header guard symbols should match their file name to make guard collisions less likely. Cleaned up with scripts/clean-header-guards.pl, followed by some renaming of new guard symbols picked by the script to better ones. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190315145123.28030-6-armbru@redhat.com> [Rebase to master: update include/hw/net/ne2000-isa.h]
2019-04-18disas: Rename include/disas/bfd.h back to include/disas/dis-asm.hMarkus Armbruster20-20/+20
Commit dc99065b5f9 (v0.1.0) added dis-asm.h from binutils. Commit 43d4145a986 (v0.1.5) inlined bfd.h into dis-asm.h to remove the dependency on binutils. Commit 76cad71136b (v1.4.0) moved dis-asm.h to include/disas/bfd.h. The new name is confusing when you try to match against (pre GPLv3+) binutils. Rename it back. Keep it in the same directory, of course. Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190417191805.28198-17-armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-03-19RISC-V: Remove unnecessary disassembler constraintsMichael Clark1-138/+0
Remove machine generated constraints that are not referenced by the pseudo-instruction constraints. Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-05disas: nanoMIPS: Add graphical description of pool organizationAleksandar Markovic1-0/+102
Add graphical description of nanoMIPS instruction pool organization. Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Message-Id: <1551800076-8104-3-git-send-email-aleksandar.markovic@rt-rk.com>
2019-03-05disas: nanoMIPS: Correct comments to handlers of some DSP instructionsAleksandar Markovic1-204/+230
Correct comments to handlers of some DSP instructions. Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Message-Id: <1551800076-8104-2-git-send-email-aleksandar.markovic@rt-rk.com>
2019-02-27disas: nanoMIPS: Fix a function misnomerAleksandar Markovic2-49/+49
Rename function extract_ac_13_12() to extract_ac_15_14(). Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Message-Id: <1551185735-17154-3-git-send-email-aleksandar.markovic@rt-rk.com>
2019-01-24disas: nanoMIPS: Amend DSP instructions related commentsAleksandar Markovic1-44/+75
Amend some DSP instructions related comments. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-11remove space-tab sequencesPaolo Bonzini4-9/+9
There are not many, and they are all simple mistakes that ended up being committed. Remove them. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20181213223737.11793-2-pbonzini@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-03disas: nanoMIPS: Add a note on documentationAleksandar Markovic1-0/+7
Add "nanoMIPS32 Instruction Set Technical Reference Manual" as a reference. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Reorder declarations and definitions of gpr decodersAleksandar Markovic2-103/+104
Reorder declarations and definitions of gpr decoders by number of input bits of corresponding encoding type. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Comment the decoder of 'gpr1' gpr encoding typeAleksandar Markovic1-0/+21
Comment the decoder of 'gpr1' gpr encoding type in nanoMIPS disassembler. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Rename the decoder of 'gpr1' gpr encoding typeAleksandar Markovic2-3/+3
Rename the decoder of 'gpr1' gpr encoding type in nanoMIPS disassembler. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Comment the decoder of 'gpr2.reg2' gpr encoding typeAleksandar Markovic1-0/+22
Comment the decoder of 'gpr2.reg2' gpr encoding type in nanoMIPS disassembler. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Rename the decoder of 'gpr2.reg2' gpr encoding typeAleksandar Markovic2-4/+4
Rename the decoder of 'gpr2.reg2' gpr encoding type in nanoMIPS disassembler. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Comment the decoder of 'gpr2.reg1' gpr encoding typeAleksandar Markovic1-0/+22
Comment the decoder of 'gpr2.reg1' gpr encoding type in nanoMIPS disassembler. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Rename the decoder of 'gpr2.reg1' gpr encoding typeAleksandar Markovic2-4/+4
Rename the decoder of 'gpr2.reg1' gpr encoding type in nanoMIPS disassembler. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Comment the decoder of 'gpr4.zero' gpr encoding typeAleksandar Markovic1-0/+27
Comment the decoder of 'gpr4.zero' gpr encoding type in nanoMIPS disassembler. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Rename the decoder of 'gpr4.zero' gpr encoding typeAleksandar Markovic2-6/+6
Rename the decoder of 'gpr4.zero' gpr encoding type in nanoMIPS disassembler. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Comment the decoder of 'gpr4' gpr encoding typeAleksandar Markovic1-0/+26
Comment the decoder of 'gpr4' gpr encoding type in nanoMIPS disassembler. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Rename the decoder of 'gpr4' gpr encoding typeAleksandar Markovic2-11/+11
Rename the decoder of 'gpr4' gpr encoding type in nanoMIPS disassembler. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Comment the decoder of 'gpr3.src.store' gpr encoding typeAleksandar Markovic1-0/+32
Comment the decoder of 'gpr3.src.store' gpr encoding type in nanoMIPS disassembler. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Rename the decoder of 'gpr3.src.store' gpr encoding typeAleksandar Markovic2-6/+6
Rename the decoder of 'gpr3.src.store' gpr encoding type in nanoMIPS disassembler. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Comment the decoder of 'gpr3' gpr encoding typeAleksandar Markovic1-3/+48
Comment the decoder of 'gpr3' gpr encoding type in nanoMIPS disassembler. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Rename the decoder of 'gpr3' gpr encoding typeAleksandar Markovic2-49/+49
Rename the decoder of 'gpr3' gpr encoding type in nanoMIPS disassembler. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Fix order of more invocationsAleksandar Markovic1-130/+130
Fix order of extraction function invocations so that extraction goes from MSB side to LSB side of the given instruction coding content. This is desireable because of consistency and easier visual spotting of errors. After this patch, all such invocations should be in the desired order. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
generated by cgit v1.1 at 2024-12-29 19:30:25 +0000