aboutsummaryrefslogtreecommitdiff
path: root/device_tree.c
AgeCommit message (Collapse)AuthorFilesLines
2018-12-14device_tree.c: Don't use load_image()Peter Maydell1-1/+1
The load_image() function is deprecated, as it does not let the caller specify how large the buffer to read the file into is. Instead use load_image_size(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20181130151712.2312-9-peter.maydell@linaro.org
2018-06-29device_tree: Add qemu_fdt_node_unit_pathEric Auger1-0/+55
This helper allows to retrieve the paths of nodes whose name match node-name or node-name@unit-address patterns. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 1530044492-24921-2-git-send-email-eric.auger@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29device_tree: Replace error_setg(&error_fatal) by error_report() + exit()Philippe Mathieu-Daudé1-10/+13
Use error_report() + exit() instead of error_setg(&error_fatal), as suggested by the "qapi/error.h" documentation: Please don't error_setg(&error_fatal, ...), use error_report() and exit(), because that's more obvious. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-id: 20180625165749.3910-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-04-26device_tree: Increase FDT_MAX_SIZE to 1 MiBGeert Uytterhoeven1-1/+1
It is not uncommon for a contemporary FDT to be larger than 64 KiB, leading to failures loading the device tree from sysfs: qemu-system-aarch64: qemu_fdt_setprop: Couldn't set ...: FDT_ERR_NOSPACE Hence increase the limit to 1 MiB, like on PPC. For reference, the largest arm64 DTB created from the Linux sources is ca. 75 KiB large (100 KiB when built with symbols/fixup support). Cc: qemu-stable@nongnu.org Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Message-id: 1523541337-23919-1-git-send-email-geert+renesas@glider.be Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-09Move include qemu/option.h from qemu-common.h to actual usersMarkus Armbruster1-1/+1
qemu-common.h includes qemu/option.h, but most places that include the former don't actually need the latter. Drop the include, and add it to the places that actually need it. While there, drop superfluous includes of both headers, and separate #include from file comment with a blank line. This cleanup makes the number of objects depending on qemu/option.h drop from 4545 (out of 4743) to 284 in my "build everything" tree. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-20-armbru@redhat.com> [Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
2017-05-07device_tree: fix compiler warnings (clang 5)Philippe Mathieu-Daudé1-0/+1
static code analyzer complain: device_tree.c:155:18: warning: Null pointer passed as an argument to a 'nonnull' parameter while ((de = readdir(d)) != NULL) { ^~~~~~~~~~ Reported-by: Clang Static Analyzer Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-05-19qemu-common: stop including qemu/bswap.h from qemu-common.hPaolo Bonzini1-0/+1
Move it to the actual users. There are still a few includes of qemu/bswap.h in headers; removing them is left for future work. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster1-0/+1
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-19device_tree: qemu_fdt_getprop_cell converted to use the error APIEric Auger1-7/+14
This patch aligns the prototype with qemu_fdt_getprop. The caller can choose whether the function self-asserts on error (passing &error_fatal as Error ** argument, corresponding to the legacy behavior), or behaves differently such as simply output a message. In this later case the caller can use the new lenp parameter to interpret the error if any. Signed-off-by: Eric Auger <eric.auger@linaro.org> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-02-19device_tree: qemu_fdt_getprop converted to use the error APIEric Auger1-5/+6
Current qemu_fdt_getprop exits if the property is not found. It is sometimes needed to read an optional property, in which case we do not wish to exit but simply returns a null value. This patch converts qemu_fdt_getprop to accept an Error **, and existing users are converted to pass &error_fatal. This preserves the existing behaviour. Then to use the API with your optional semantic a null parameter can be conveyed. Signed-off-by: Eric Auger <eric.auger@linaro.org> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-02-19device_tree: introduce qemu_fdt_node_pathEric Auger1-0/+54
This new helper routine returns a NULL terminated array of node paths matching a node name and a compat string. Signed-off-by: Eric Auger <eric.auger@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-02-19device_tree: introduce load_device_tree_from_sysfsEric Auger1-0/+100
This function returns the host device tree blob from sysfs (/proc/device-tree). It uses a recursive function inspired from dtc read_fstree. Signed-off-by: Eric Auger <eric.auger@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-02-04all: Clean up includesPeter Maydell1-6/+1
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1454089805-5470-16-git-send-email-peter.maydell@linaro.org
2015-07-27device_tree: Fix a typoKamalesh Babulal1-1/+1
Fix spelling of 'allocting' -> 'allocating'. Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-03device-tree: Make a common-objPeter Crosthwaite1-1/+0
There is no reason for device tree API to be built per-target. common-obj it. There is an extraneous inclusion of config.h that needs to be removed. Cc: Alexander Graf <agraf@suse.de> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-11machine: query phandle-start machine propertyMarcel Apfelbaum1-3/+2
Commit e79d5a6 ("machine: remove qemu_machine_opts global list") removed the global option descriptions and moved them to MachineState's QOM properties. Query phandle-start by accessing machine properties through designated wrappers. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-07device-tree: fix memory leakSergey Fedorov1-4/+10
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-02device_tree.c: dump all err mesages with error_reportLi Liu1-20/+20
Signed-off-by: Li Liu <john.liuli@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-09-02device_tree.c: redirect load_device_tree err message to stderrLi Liu1-7/+8
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Li Liu <john.liuli@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-12-20device_tree: qemu_fdt_setprop: Rename val_array argPeter Crosthwaite1-2/+2
Looking at the implementation, this doesn't really have a lot to do with arrays. Its just a pointer to a buffer and is passed through to the wrapped fn (qemu_fdt_setprop) unchanged. So rename to make it consistent with libfdt, which in the wrapped function just calls it "val". Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-20device_tree: s/qemu_devtree/qemu_fdt globallyPeter Crosthwaite1-31/+31
The qemu_devtree API is a wrapper around the fdt_ set of APIs. Rename accordingly. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> [agraf: also convert hw/arm/virt.c] Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-10device_tree.c: Terminate the empty reservemap in create_device_tree()Peter Maydell1-0/+4
Device trees created with create_device_tree() may not have any entries in their reservemap, because the FDT API requires that the reservemap is completed before any FDT nodes are added, and create_device_tree() itself creates a node. However we were not calling fdt_finish_reservemap(), which meant that there was no terminator in the reservemap list and whatever happened to be at the start of the FDT data section would end up being interpreted as reservemap entries. Avoid this by calling fdt_finish_reservemap() to add the terminator. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Alexander Graf <agraf@suse.de> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1385140638-10444-3-git-send-email-peter.maydell@linaro.org
2013-07-19device_tree: Add qemu_devtree_setprop_sized_cells() utility functionsPeter Maydell1-0/+33
We already have a qemu_devtree_setprop_cells() which sets a dtb property to an array of cells whose values are specified by varargs. However for the fairly common case of setting a property to a list of addresses or of address,size pairs the number of cells used by each element in the list depends on the parent's #address-cells and #size-cells properties. To make this easier we provide an analogous qemu_devtree_setprop_sized_cells() macro which allows the number of cells used by each element to be specified. This is implemented using an underlying qemu_devtree_setprop_sized_cells_from_array() function which takes the values and sizes as an array; this may also be directly useful for cases where the cell contents are constructed programmatically. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1373977512-28932-2-git-send-email-peter.maydell@linaro.org
2013-07-09vl: Tighten parsing of -machine option phandle_startMarkus Armbruster1-5/+2
Make it QEMU_OPT_NUMBER, so it gets parsed by generic code, which actually bothers to check for errors, rather than its user, which doesn't. Cc: Alexander Graf <agraf@suse.de> Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alexander Graf <agraf@suse.de> Message-id: 1372943363-24081-8-git-send-email-armbru@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-09Simplify -machine option queries with qemu_get_machine_opts()Markus Armbruster1-18/+10
The previous two commits fixed bugs in -machine option queries. I can't find fault with the remaining queries, but let's use qemu_get_machine_opts() everywhere, for consistency, simplicity and robustness. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-id: 1372943363-24081-7-git-send-email-armbru@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-06-11device tree: Fix cppcheck warningStefan Weil1-1/+1
Fix this cppcheck warning: Checking device_tree.c... device_tree.c:216: style: Checking if unsigned variable 'r' is less than zero. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2012-12-19softmmu: move include files to include/sysemu/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini1-2/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-05device tree: simplify dumpdtb codeAlexander Graf1-8/+1
As per Peter's suggestion, we can use glib to write out a buffer in whole to a file, simplifying the code dramatically. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-05fdt: move dumpdtb interpretation code to device_tree.cAlexander Graf1-0/+22
The dumpdtb code can be useful in more places than just for e500. Move it to a generic place. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-07-20device_tree: Add support for reading device tree propertiesPeter Maydell1-0/+30
Add support for reading device tree properties (both generic and single-cell ones) to QEMU's convenience wrapper layer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
2012-06-24dt: make setprop argument staticAlexander Graf1-1/+1
Whatever we pass in to qemu_devtree_setprop to put into the device tree will not get modified by that function, so it can easily be declared const. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@petalogix.com>
2012-06-24dt: Add global option to set phandle start offsetAlexander Graf1-1/+27
If anyone outside of QEMU wants to mess with a QEMU generated device tree, he needs to know which range phandles are valid in. So let's expose a machine option that an external program can use to set the start allocate id for phandles in QEMU. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-24Revert "dt: temporarily disable subtree creation failure check"Alexander Graf1-2/+0
This reverts commit "dt: temporarily disable subtree creation failure check" which was meant as a temporary solution to keep external and dynamic device tree construction intact. Now that we switched to fully dynamic dt construction, it's no longer necessary. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-24dt: add helper for 64bit cell addsAlexander Graf1-0/+7
Some times in the device tree, we find an array of 2 u32 cells that really are a single u64 value. This patch adds a helper to make the creation of these easy. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@petalogix.com>
2012-06-24dt: add helper for phandle allocationAlexander Graf1-0/+7
Phandle references work by having 2 pieces: - a "phandle" 1-cell property in the device tree node - a reference to the same value in a property we want to point to the other node To generate the 1-cell property, we need an allocation mechanism that gives us a unique number space. This patch adds an allocator for these properties. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-24dt: add helper for empty dt creationAlexander Graf1-0/+37
We want to get rid of the concept of loading an external device tree and instead generate our own. However, to do this we need to also create a device tree template programatically. This patch adds a helper to create an empty device tree in memory. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@petalogix.com>
2012-06-24dt: add helper for phandle enumerationAlexander Graf1-1/+15
This patch adds a helper to search for a node's phandle by its path. This is especially useful when the phandle is part of an array, not just a single cell in which case qemu_devtree_setprop_phandle would be the easy choice. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@petalogix.com>
2012-06-24dt: temporarily disable subtree creation failure checkAlexander Graf1-0/+2
Usually we want to know when creating a subtree fails. However, while introducing this patch set we have to modify the device tree and some times have the code to create a subtree in both the binary tree and the dynamically created tree. So ignore failures about this for now and enable them once we got rid of the binary device tree. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-24dt: add helper for phandle referencesAlexander Graf1-0/+8
Phandles are the fancy device tree name for "pointer to another node". To create a phandle property, we most likely want to reference to the node we're pointing to by its path. So create a helper that allows us to do so. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@petalogix.com>
2012-06-24dt: allow add_subnode to create root subnodesAlexander Graf1-1/+6
Our subnode creation helper can't handle creation of root subnodes, like "/memory". Fix this by allowing the parent node to be an empty string, indicating the root node. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@petalogix.com>
2011-10-26device_tree: Fix potential memory leakStefan Weil1-0/+1
cppcheck error report: device_tree.c:156: error: Memory leak: dupname Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-10-06device tree: give dt more sizeAlexander Graf1-0/+1
We currently load a device tree blob and then just take its size x2 to account for modifications we do inside. While this is nice and great, it fails when we have a small device tree as blob and lots of nodes added in machine init code. So for now, just make it 20k bigger than it was before. We maybe want to be more clever about this later. Signed-off-by: Alexander Graf <agraf@suse.de>
2011-10-06device tree: dont fail operationsAlexander Graf1-25/+51
When we screw up and issue an FDT command that doesn't work, we really need to know immediately and usually can't continue to create the machine. To make sure we don't need to add error checking in all device tree modification code users, we can just add the fail checks to the qemu abstract functions. Signed-off-by: Alexander Graf <agraf@suse.de>
2011-10-06device tree: add add_subnode commandAlexander Graf1-0/+24
We want to be able to create subnodes in our device tree, so export it through the qemu device tree abstraction framework. Signed-off-by: Alexander Graf <agraf@suse.de>
2011-10-06device tree: add nop_nodeAlexander Graf1-0/+11
We have a qemu internal abstraction layer on FDT. While I'm not fully convinced we need it at all, it's missing the nop_node functionality that we now need on e500. So let's add it and think about the general future of that API later. Signed-off-by: Alexander Graf <agraf@suse.de>
2011-08-20Use glib memory allocation and free functionsAnthony Liguori1-2/+2
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-04-15Remove unused sysemu.h include directivesBlue Swirl1-1/+0
Remove unused sysemu.h include directives to speed up build with the following patches. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-04-01Allow qemu_devtree_setprop() to take arbitrary valuesDavid Gibson1-1/+1
Currently qemu_devtree_setprop() expects the new property value to be given as a uint32_t *. While property values consisting of u32s are common, in general they can have any bytestring value. Therefore, this patch alters the function to take a void * instead, allowing callers to easily give anything as the property value. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2009-09-23Fix device tree compile broken by ca20cf32ab3d945155141ef737f5d08ebb373e1dBlue Swirl1-0/+1
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.1 at 2024-12-27 22:45:56 +0000