aboutsummaryrefslogtreecommitdiff
path: root/default-configs
AgeCommit message (Collapse)AuthorFilesLines
2013-02-28hw/sdhci: introduce standard SD host controllerIgor Mitsyanko1-0/+2
Device model for standard SD Host Controller Interface (SDHCI) compliant with version 2.00 of SD association specification. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-19make usb devices configurableGerd Hoffmann16-0/+23
Leave the core usb devices (usb hub, tablet, mouse, keyboard) enabled unconditionally. Make the other ones configurable. Exceptions: - bluetooth: not qdevified yet, has a vl.c dependency because of that, thus disabling isn't as easy as not linking the object file. - smardcard: ccid-card-emulated depends on that one *and* CONFIG_SMARTCARD_NSS. So it isn't a one-liner and comes as separate patch because of that. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-01-14Add TEWS TPCI200 IndustryPack emulationAlberto Garcia1-0/+1
The TPCI200 is a PCI board that supports up to 4 IndustryPack modules. A new bus type called 'IndustryPack' has been created so any compatible module can be attached to this board. Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alberto Garcia <agarcia@igalia.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-10Merge branch 'master' of git://git.qemu.org/qemu into prep-upAndreas Färber5-1/+7
Conflicts: hw/Makefile.objs hw/ppc_prep.c Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2012-10-27target-sparc64: disable VGA cirrusAurelien Jarno1-1/+0
OpenBIOS on sparc64 only support Standard VGA and not Cirrus VGA. Don't build Cirrus VGA support so that it can't be selected. This fixes the breakage introduced by commit f2898771. Reported-by: Richard Henderson <rth@twiddle.net> Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Tested-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-22serial: add pci variantGerd Hoffmann1-0/+2
So we get a hot-pluggable 16550 uart. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-10m25p80: Initial implementation of SPI flash devicePeter A. G. Crosthwaite3-0/+5
Added device model for m25p80 style SPI flash family. Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
2012-08-15prep: Use pc87312 device instead of collection of random ISA devicesHervé Poussineau2-0/+4
We can't however replace the built-in IDE controller, as the one in pc87312 is only single-channel and can use only IRQ 14. Therefore the pc87312's IDE function gets disabled via the config property. PReP emulation also gains a parallel port emulation this way. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> [AF: Use TYPE_PC87312 constant, add to ppc64-softmmu and to MAINTAINERS] Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2012-08-15prep: Include devices for ppc64 as wellAndreas Färber1-0/+3
Allows running qemu-system-ppc64 -M prep for consistency. Reported-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Andreas Färber <andreas.faerber@web.de> Acked-by: Hervé Poussineau <hpoussineau@reactos.org>
2012-08-13arm: Move some ARM devices into libhwAndreas Färber1-0/+18
Avoids some unnecessary dependencies on cpu.h and prepares for a future armeb-softmmu where most machines would not be built. Defer touching the SoC devices since most have implicit or explicit dependencies on the CPU. Signed-off-by: Andreas Färber <andreas.faerber@suse.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-08-11unicore32-softmmu: Add ps2 supportGuan Xuetao1-0/+1
This patch adds ps2/keyboard support, and enables CONFIG_PCKBD. Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-11unicore32-softmmu: Add puv3 ostimer supportGuan Xuetao1-0/+1
This patch adds puv3 ostimer support, include os timer device simulation and ptimer support in puv3 machine. Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-11unicore32-softmmu: Add puv3 soc/board supportGuan Xuetao1-0/+1
This patch only add puv3 soc/board support, which introduces puv3 machine description, and specifies console type. Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-11unicore32-softmmu: Add unicore32-softmmu build supportGuan Xuetao1-0/+1
This patch adds unicore32-softmmu build support, include configure, makefile, arch_init, and all missing functions needed by softmmu. Although all missing functions are empty, unicore32-softmmu could be build successfully. By 20120804: change QEMU_ARCH_UNICORE32 to 0x4000 Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-09esp: move PCI emulation to a new file esp-pci.cHervé Poussineau1-0/+1
sparc machines loose ability to instanciate PCI ESP SCSI adapter, which is not a big loose as they don't have PCI bus support. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-03esp: enable for all PCI machinesPaolo Bonzini2-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-08-03Revert "megasas: disable due to build breakage"Paolo Bonzini1-0/+1
This reverts commit 92336855975805d88c7979f53bc05c2d47abab04. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-07-27target-or32: Add linux user supportJia Liu1-0/+1
Add QEMU OpenRISC linux user support. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-07-27target-or32: Add target stubs and QOM cpuJia Liu1-0/+4
Add OpenRISC target stubs, QOM cpu and basic machine. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-07-14esp: add AMD PCscsi emulation (PCI SCSI adapter)Hervé Poussineau1-0/+1
The PCI version is supported in lots of Operating Systems, and has been successfully tested on: - MS DOS 6.22 (using DC390 driver) - MS Windows 3.11 (using DC390 driver) - MS Windows 98 SE (using default driver) - MS Windows NT 3.1 (using DC390 driver) - MS Windows NT 4.0 (using default driver) Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-07-09megasas: disable due to build breakageAnthony Liguori1-1/+0
The Buildbot has detected a new failure on builder default_i386_rhel61 while building qemu. Full details are available at: http://buildbot.b1-systems.de/qemu/builders/default_i386_rhel61/builds/304 The proper fix is non-trivial so let's disable the build by default until it's fixed properly. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-07-02megasas: LSI Megaraid SAS HBA emulationHannes Reinecke1-0/+1
This patch adds an emulation for the LSI Megaraid SAS 8708EM2 HBA. I've tested it to work with Linux, Windows Vista, and Windows7. Signed-off-by: Hannes Reinecke <hare@suse.de> [ Squashed trivial changes from Andreas Faerber, rebased over IOMMU and QBus changes - Paolo ] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-15xilinx_axi*: Share devices between microblaze and microblazeelAndreas Färber2-0/+2
Speeds up the build. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2012-06-15hw/xilinx_*: Share Xilinx devices between ppc and microblazeAndreas Färber5-0/+5
Speeds up the build. xilinx_ethlite uses tswap32() and is thus target-dependent. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2012-05-01Drop darwin-userAndreas Färber2-4/+0
It's been orphaned, not compiling for a long time and despite Apple's drop of their Rosetta ppc emulation technology with Mac OS X Lion no one has stepped up to fix it. Testing necessary changes wrt QOM'ification thus is impossible, so we might as well remove it completely. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2012-03-19get rid of CONFIG_VIRTIO_SCSIPaolo Bonzini2-2/+0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-02-24Merge remote-tracking branch 'bonzini/virtio-scsi' into stagingAnthony Liguori2-0/+2
* bonzini/virtio-scsi: scsi-block: always use scsi_generic_ops for cache != none scsi: fix searching for an empty id scsi: fix wrong return for target INQUIRY virtio-scsi: add migration support virtio-scsi: process control queue requests virtio-scsi: add basic SCSI bus operation virtio-scsi: Add basic request processing infrastructure virtio-scsi: Add virtio-scsi stub device scsi-disk: add migration support scsi-generic: add migration support scsi: add SCSIDevice vmstate definitions scsi-disk: enable scatter/gather functionality scsi: add scatter/gather functionality scsi: pass residual amount to command_complete ahci: use new DMA helpers dma-helpers: add accounting wrappers dma-helpers: add dma_buf_read and dma_buf_write dma-helpers: make QEMUSGList target independent
2012-02-22jazz-led: compile it only twiceHervé Poussineau4-0/+4
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-22hw/pc_sysfw: support system flash memory with pflashJordan Justen2-0/+2
Flash can be enabled by calling pc_system_firmware_init with the system_flash_enabled parameter being non-zero. If system_flash_enabled is zero, then the older qemu rom creation method will be used. If flash is enabled and a pflash image is found, then it is used for the system firmware image. If flash is enabled and a pflash image is not initially found, then a read-only pflash device is created using the -bios filename. KVM cannot execute from a pflash region currently. Therefore, when KVM is enabled, the old rom based initialization method is used. Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-22virtio-scsi: Add virtio-scsi stub deviceStefan Hajnoczi2-0/+2
Add a useless virtio SCSI HBA device: qemu -device virtio-scsi-pci Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-02-02linux-user: Add default configs for mips64[el]Andreas Färber2-0/+2
Prepares for mips64[el]-linux-user targets. Signed-off-by: Khansa Butt <khansa@kics.edu.pk> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2012-02-02linux-user: Add default-configs for mipsn32[el]Andreas Färber2-0/+2
Prepares for mipsn32[el]-linux-user targets. Signed-off-by: Ulricht Hecht <uli@suse.de> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2012-01-23Merge remote-tracking branch 'afaerber/prep-up' into stagingAnthony Liguori1-0/+3
* afaerber/prep-up: prep: Use i82378 PCI->ISA bridge for 'prep' machine prep: Add i82378 PCI-to-ISA bridge emulation prep: Add i82374 DMA emulation MAINTAINERS: Add PCI host bridge files to PReP machine prep: qdev'ify Raven host bridge (SysBus) prep_pci: Update I/O to MemoryRegion ops prep_pci: Simplify I/O endianness prep: qdev'ify Raven host bridge (PCIDevice) prep: Use ISA m48t59 prep: Fix offset of BIOS MemoryRegion
2012-01-22vga: make Cirrus ISA device optionalBlue Swirl12-0/+20
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-01-20prep: Add i82378 PCI-to-ISA bridge emulationAndreas Färber1-0/+2
Prepare Intel 82378 emulation for use by PReP platforms. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Create ISA bus in this device (suggested by Markus). Rebase onto Memory API, mark memory ops as Little Endian. Add VMState. Provide access to i8259 IRQs via qdev GPIOs. Signed-off-by: Andreas Färber <andreas.faerber@web.de> Cc: Markus Armbruster <armbru@redhat.com> Cc: Alexander Graf <agraf@suse.de> Cc: Jan Kiszka <jan.kiszka@siemens.com>
2012-01-20prep: Add i82374 DMA emulationAndreas Färber1-0/+1
Prepare Intel 82374 emulation for use by Intel 82378 PCI->ISA bridge. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Confine to CONFIG_I82374. Add VMState. Signed-off-by: Andreas Färber <andreas.faerber@web.de> Reviewed-by: Alexander Graf <agraf@suse.de>
2012-01-17xhci: Initial xHCI implementationHector Martin1-0/+1
Based on the implementation from Hector Martin <hector@marcansoft.com> Hectors's implementation completely sidestepped the qemu usb system and used libusb directly for usb device pass through. So I've ripped out the libusb bits (or left them in disabled, as reference for further coding) and hooked up the qemu subsystem instead. That work is not complete yet though, partly due to limitations of the qemu usb subsystem. Nevertheless I think it is better to continue development in-tree, especially as the qemu usb bits need a bunch of improvements too for decent usb 3.0 support. Current state: - usb-storage emulation should work ok. - Devices which need constant polling (HID emulation like usb-tablet) are known to not work. - ISO xfers are not implemented yet. - superspeed ports are not implemented yet. - usb pass-through is completely untested so far. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-11-02xtensa_lx60: add FLASH supportMax Filippov2-0/+2
LX60 carry 4 Mbyte FLASH and 128 Kbyte SRAM, LX200 carry 16 Mbyte FLASH and 32 Mbyte SRAM. Either of these memories may be mapped to the system ROM region. Select boot from FLASH if -kernel option is not specified, otherwise boot from SRAM. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2011-10-16i8259: Move to hw libraryJan Kiszka10-0/+10
No target-specific bits remaining, let's move it over. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16target-xtensa: add Avnet LX60/LX110/LX200 boardsMax Filippov2-0/+6
These boards carry similar hardware: SDRAM (48M for LX110, 64M for LX60, 96M for LX200), 16 Mbyte FLASH, FPGA, 10/100 Mbps Ethernet PHY and 16550 UART. FPGA may be loaded with almost any Tensilica processor. It is also used to implement Ethernet MAC, e.g. OpenCores 10/100 Mbps Ethernet MAC and LED/DIP switches access. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-08target-alpha: Add CLIPPER emulation.Richard Henderson1-0/+2
This is a DP264 variant, SMP capable, no unusual hardware present. The emulation does not currently include any PCI IOMMU code. Hopefully the generic support for that can be merged to HEAD soon. Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-09-10target-xtensa: add target to the configure scriptMax Filippov2-0/+2
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10g364fb: compile in hwlibBlue Swirl4-0/+4
Compile g364fb in hwlib. Two compilations less for the full build. Acked-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-05-31target-alpha: Enable the alpha-softmmu target.Richard Henderson1-0/+9
With all of the pre-existing code that would not compile gone, this is the earliest point at which the target can be enabled. There is no machine defined yet, so this will crash on startup. Enable the target anyway, to make sure that further compilation problems do not creep back in. Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-05-26usb: add ehci adapterGerd Hoffmann1-0/+1
This patch finally merges the EHCI host adapter aka USB 2.0 support. Based on the ehci bits collected @ git://git.kiszka.org/qemu.git ehci EHCI has a long out-of-tree history. Project was started by Mark Burkley, with contributions by Niels de Vos. David S. Ahern continued working on it. Kevin Wolf, Jan Kiszka and Vincent Palatin contributed bugfixes. /me (Gerd Hoffmann) picked it up where it left off, prepared the code for merge, fixed a few bugs and added basic user docs. Cc: David S. Ahern <daahern@cisco.com> Cc: Jan Kiszka <jan.kiszka@web.de> Cc: Kevin Wolf <mail@kevin-wolf.de> Cc: Vincent Palatin <vincent.palatin_qemu@m4x.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-05-20s390x: build s390x by defaultAlexander Graf1-0/+1
This patch enables building of s390x-softmmu and s390x-linux-user targets by default. Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-12unicore32: necessary modifications for other files to support unicore32Guan Xuetao1-0/+1
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-04-04lm32: add support for the Milkymist boardMichael Walle1-0/+1
This patch adds almost complete support for the Milkymist system-on-chip (http://www.milkymist.org). Additional to running bare metal applications, booting a linux kernel with initrd is supported. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04lm32: add Milkymist memory card supportMichael Walle1-0/+1
This patch adds support for Milkymist's memory card core. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-03-22vmmouse: Fix typo preventing x86-64 buildJan Kiszka1-1/+1
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>