aboutsummaryrefslogtreecommitdiff
path: root/default-configs
AgeCommit message (Collapse)AuthorFilesLines
2019-02-05hw/vfio/Makefile.objs: Create new CONFIG_* variables for VFIO core and PCIPaolo Bonzini3-2/+7
Make hw/vfio configurable and add new CONFIG_VFIO_* to the default-configs/s390x*-softmmu.mak. This allow a finer-grain selection of the various VFIO backends. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-28-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05hw/i2c/Makefile.objs: Create new CONFIG_* variables for EEPROM and ACPI ↵Paolo Bonzini4-0/+6
controller Create separate variables for these components, they are used in many boards but not all. This allows finer-grain selection of the included code with default-configs/*.mak. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05hw/tricore/Makefile.objs: Create CONFIG_* for tricoreYang Zhong1-0/+1
Add the new configs to default-configs/tricore-sofmmu.mak. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-26-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05hw/openrisc/Makefile.objs: Create CONFIG_* for openriscYang Zhong1-0/+1
Add the new configs to default-configs/or1k-sofmmu.mak. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-25-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05hw/moxie/Makefile.objs: Conditionally build moxieYang Zhong1-0/+1
CONFIG_MOXIE added for moxiesim board. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-24-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05hw/hppa/Makefile.objs: Create CONFIG_* for hppaYang Zhong1-0/+1
Add the new configs to default-configs/hppa-sofmmu.mak. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20190202072456.6468-23-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05hw/cris/Makefile.objs: Create CONFIG_* for crisYang Zhong1-0/+1
Add the new configs to default-configs/cris-sofmmu.mak. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-22-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05hw/alpha/Makefile.objs: Create CONFIG_* for alphaYang Zhong1-0/+1
Add the new configs to default-configs/alpha-sofmmu.mak. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20190202072456.6468-21-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05hw/sparc64/Makefile.objs: Create CONFIG_* for sparc64Yang Zhong1-0/+2
Add the new configs to default-configs/sparc64-sofmmu.mak. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-20-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05hw/riscv/Makefile.objs: Create CONFIG_* for riscv boardsYang Zhong2-0/+14
Add the new configs to default-configs/riscv*-sofmmu.mak. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-19-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05hw/nios2/Makefile.objs: Conditionally build nios2Yang Zhong1-0/+1
CONFIG_NIOS2_10M50 added for 10m50 dev board. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-18-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05hw/xtensa/Makefile.objs: Build xtensa_sim and xtensa_fpga conditionallyÁkos Kovács2-0/+6
Add the new CONFIG_* values to default-config/xtensa*-softmmu.mak. Signed-off-by: Ákos Kovács <akoskovacs@gmx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Message-Id: <20190202072456.6468-17-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05hw/sparc/Makefile.objs: CONFIG_* for sun4m and leon3 createdÁkos Kovács1-0/+2
CONFIG_LEON3 added to default-configs/sparc-softmmu.mak. Signed-off-by: Ákos Kovács <akoskovacs@gmx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-15-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05hw/s390/Makefile.objs: Create new CONFIG_* variables for s390x boards and ↵Paolo Bonzini1-0/+1
devices Make hw/s390x configurable and add new CONFIG_* to the default-configs/s390x*-softmmu.mak. This will be used to enable/disable vfio-ccw. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-14-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05hw/sh4/Makefile.objs: New CONFIG_* varibales created for sh4 boards and deviceÁkos Kovács2-0/+4
Make hw/sh4 configurable and add new CONFIG_* to the default-configs/sh4*-softmmu.mak. Signed-off-by: Ákos Kovács <akoskovacs@gmx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-13-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05hw/ppc/Makefile.objs: Build all boards conditinally with CONFIG_*Ákos Kovács1-1/+6
CONFIG_PPC405, CONFIG_PPC440, CONFIG_MAC_OLDWORLD, CONFIG_MAX_NEWWORLD and CONFIG_VIRTEX configuration options created for default-configs/ppc*-softmmu.mak. Signed-off-by: Ákos Kovács <akoskovacs@gmx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-12-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05hw/mips/Makefile.objs: Create CONFIG_* for r4k, malta, mipssim boardsÁkos Kovács1-0/+3
Add the new configs to default-configs/mips*-sofmmu.mak. Signed-off-by: Ákos Kovács <akoskovacs@gmx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-11-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05hw/microblaze/Makefile.objs: Create configs for petalogix and xilinx boardsÁkos Kovács1-0/+3
CONFIG_PETALOGIX_* and CONFIG_XLNX_* configs added to default-configs/microblaze-softmmu.mak and default-configs/microblazeel-softmmu.mak. Signed-off-by: Ákos Kovács <akoskovacs@gmx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-10-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05hw/m68k/Makefile.objs: Conditionally build boardsÁkos Kovács1-0/+2
CONFIG_AN5206, CONFIG_MCF5206 and CONFIG_MCF5208 make variables created for m68k boards, and added to default-configs/m86k-softmmu.mak. Signed-off-by: Ákos Kovács <akoskovacs@gmx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-9-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05hw/arm/Makefile.objs: CONFIG_ARM_VIRT created for virt boardYang Zhong1-0/+1
Make ARM virt code configurable and the new CONFIG_ARM_VIRT definitions added to the default-configs/arm-softmmu.mak. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-8-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05hw/i386/Makefile.objs: Build pc_piix* and pc_q35 boardsPaolo Bonzini1-0/+2
CONFIG_PIIX and CONFIG_Q35 created for the pc board object files. These are enabled automatically at default-configs/i386-softmmu.mak and default-configs/x86_64-softmmu.mak Signed-off-by: Ákos Kovács <akoskovacs@gmx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-7-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05build: actually use CONFIG_PAMPaolo Bonzini1-0/+1
Do not link it unconditionally into all binaries. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-6-yang.zhong@intel.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05hw/pci-host/Makefile.objs: make CONFIGS clear for PCI EXPRESSYang Zhong6-7/+7
Change the CONFIGs for PCI EXPRESS and make module name more clear for code files. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-5-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05arm: disable CONFIG_SERIAL_ISAPaolo Bonzini1-1/+0
ARM should not have an ISA bus, this device should not be enabled. Kconfig allows to clean up the dependencies and remove CONFIG_ISA_BUS=y from ARM, and then catches a contradiction between the hardcoded CONFIG_SERIAL_ISA=y and CONFIG_ISA_BUS=n. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-2-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-01Merge remote-tracking branch ↵Peter Maydell1-1/+2
'remotes/pmaydell/tags/pull-target-arm-20190201' into staging target-arm queue: * New machine mps2-an521 -- this is a model of the AN521 FPGA image for the MPS2 devboard * Fix various places where we failed to UNDEF invalid A64 instructions * Don't UNDEF a valid FCMLA on 32-bit inputs * Fix some bugs in the newly-added PAuth implementation * microbit: Implement NVMC non-volatile memory controller # gpg: Signature made Fri 01 Feb 2019 16:06:03 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20190201: (47 commits) tests/microbit-test: Add tests for nRF51 NVMC arm: Instantiate NRF51 special NVM's and NVMC hw/nvram/nrf51_nvm: Add nRF51 non-volatile memories target/arm: fix decoding of B{,L}RA{A,B} target/arm: fix AArch64 virtual address space size linux-user: Initialize aarch64 pac keys aarch64-linux-user: Enable HWCAP bits for PAuth aarch64-linux-user: Update HWCAP bits from linux 5.0-rc1 target/arm: Always enable pac keys for user-only arm: Clarify the logic of set_pc() target/arm: Enable API, APK bits in SCR, HCR target/arm: Add a timer to predict PMU counter overflow target/arm: Send interrupts on PMU counter overflow target/arm/translate-a64: Fix mishandling of size in FCMLA decode target/arm/translate-a64: Fix FCMLA decoding error exec.c: Don't reallocate IOMMUNotifiers that are in use target/arm/translate-a64: Don't underdecode SDOT and UDOT target/arm/translate-a64: Don't underdecode FP insns target/arm/translate-a64: Don't underdecode add/sub extended register target/arm/translate-a64: Don't underdecode SIMD ld/st single ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-01hw/misc/armsse-cpuid: Implement SSE-200 CPU_IDENTITY register blockPeter Maydell1-0/+1
The SSE-200 has a CPU_IDENTITY register block, which is a set of read-only registers. As well as the usual PID/CID registers, there is a single CPUID register which indicates whether the CPU is CPU 0 or CPU 1. Implement a model of this register block. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-20-peter.maydell@linaro.org
2019-02-01hw/arm/iotkit: Rename files to hw/arm/armsse.[ch]Peter Maydell1-1/+1
Rename the files that used to be iotkit.[ch] to armsse.[ch] to reflect the fact they new cover multiple Arm subsystems for embedded. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-8-peter.maydell@linaro.org
2019-02-01hw/display/milkymist-tmu2: Explicit the dependency to both X11 / OpenGLPhilippe Mathieu-Daudé1-1/+1
The TMU device requires both X11 and OpenGL. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190130120005.23123-4-philmd@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-01-17virtio: virtio 9p really requires CONFIG_VIRTFS to workJuan Quintela1-1/+1
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-17virtio: split virtio input host bits from virtio-pciJuan Quintela1-0/+1
For consistency with other devices, rename virtio_host_{initfn,pci_info} to virtio_input_host_{initfn,info}. Reviewed-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-09default-configs: Enable USB support for RISC-V machinesAlistair Francis2-0/+2
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-03Merge remote-tracking branch ↵Peter Maydell2-2/+14
'remotes/palmer/tags/riscv-for-master-3.2-part1' into staging RISC-V Changes for 3.2, Part 1 This pull request contains the first set of RISC-V patches I'd like to target for the 3.2 development cycle. It's really just a collection of bug fixes with one major new feature: PCIe can now be attached to RISC-V guests. This has passed my usual test of booting the latest Linux RC into a Fedora disk image on the virt machine. # gpg: Signature made Fri 21 Dec 2018 16:01:29 GMT # gpg: using RSA key EF4CA1502CCBAB41 # gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" # gpg: aka "Palmer Dabbelt <palmer@sifive.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41 * remotes/palmer/tags/riscv-for-master-3.2-part1: MAINTAINERS: Mark RISC-V as Supported riscv/cpu: use device_class_set_parent_realize target/riscv/pmp.c: Fix pmp_decode_napot() sifive_uart: Implement interrupt pending register RISC-V: Enable second UART on sifive_e and sifive_u RISC-V: Fix PLIC pending bitfield reads RISC-V: Fix CLINT timecmp low 32-bit writes RISC-V: Add hartid and \n to interrupt logging sifive_u: Set 'clock-frequency' DT property for SiFive UART sifive_u: Add clock DT node for GEM ethernet riscv: Enable VGA and PCIE_VGA hw/riscv/virt: Connect the gpex PCIe hw/riscv/virt: Adjust memory layout spacing hw/riscv/virt: Increase the number of interrupts Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-21spapr/xive: introduce a XIVE interrupt controllerCédric Le Goater1-0/+1
sPAPRXive models the XIVE interrupt controller of the sPAPR machine. It inherits from the XiveRouter and provisions storage for the routing tables : - Event Assignment Structure (EAS) - Event Notification Descriptor (END) The sPAPRXive model incorporates an internal XiveSource for the IPIs and for the interrupts of the virtual devices of the guest. This model is consistent with XIVE architecture which also incorporates an internal IVSE for IPIs and accelerator interrupts in the IVRE sub-engine. The sPAPRXive model exports two memory regions, one for the ESB trigger and management pages used to control the sources and one for the TIMA pages. They are mapped by default at the addresses found on chip 0 of a baremetal system. This is also consistent with the XIVE architecture which defines a Virtualization Controller BAR for the internal IVSE ESB pages and a Thread Managment BAR for the TIMA. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [dwg: Fold in field accessor fixes] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-21ppc/xive: introduce a XIVE interrupt source modelCédric Le Goater1-0/+1
The first sub-engine of the overall XIVE architecture is the Interrupt Virtualization Source Engine (IVSE). An IVSE can be integrated into another logic, like in a PCI PHB or in the main interrupt controller to manage IPIs. Each IVSE instance is associated with an Event State Buffer (ESB) that contains a two bit state entry for each possible event source. When an event is signaled to the IVSE, by MMIO or some other means, the associated interrupt state bits are fetched from the ESB and modified. Depending on the resulting ESB state, the event is forwarded to the IVRE sub-engine of the controller doing the routing. Each supported ESB entry is associated with either a single or a even/odd pair of pages which provides commands to manage the source: to EOI, to turn off the source for instance. On a sPAPR machine, the O/S will obtain the page address of the ESB entry associated with a source and its characteristic using the H_INT_GET_SOURCE_INFO hcall. On PowerNV, a similar OPAL call is used. The xive_source_notify() routine is in charge forwarding the source event notification to the routing engine. It will be filled later on. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-20riscv: Enable VGA and PCIE_VGAAlistair Francis2-0/+6
Enable compile support for VGA devices. This allows the user to conenct a display by adding '-device bochs-display -display sdl' to their command line argument. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Tested-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-12-20hw/riscv/virt: Connect the gpex PCIeAlistair Francis2-2/+8
Connect the gpex PCIe device based on the device tree included in the HiFive Unleashed ROM. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-11-08hw/ppc/spapr_rng: Introduce CONFIG_SPAPR_RNG switch for spapr_rng.cThomas Huth1-0/+1
The spapr-rng device is suboptimal when compared to virtio-rng, so users might want to disable it in their builds. Thus let's introduce a proper CONFIG switch to allow us to compile QEMU without this device. The function spapr_rng_populate_dt is required for linking, so move it to a different location. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-11-02hw/arm: versal: Add a model of Xilinx Versal SoCEdgar E. Iglesias1-0/+1
Add a model of Xilinx Versal SoC. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20181102131913.1535-2-edgar.iglesias@xilinx.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-30Merge remote-tracking branch ↵Peter Maydell2-1/+1
'remotes/vivier2/tags/qemu-trivial-for-3.1-pull-request' into staging QEMU trivial patches collected between June and October 2018 (Thank you to Thomas Huth) v2: fix 32bit build with updated patch (v3) from Philippe Mathieu-Daudé built in a 32bit debian sid chroot # gpg: Signature made Tue 30 Oct 2018 11:23:01 GMT # gpg: using RSA key F30C38BD3F2FBE3C # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" # gpg: aka "Laurent Vivier <laurent@vivier.eu>" # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/qemu-trivial-for-3.1-pull-request: milkymist-minimac2: Use qemu_log_mask(GUEST_ERROR) instead of error_report ppc: move at24c to its own CONFIG_ symbol hw/intc/gicv3: Remove useless parenthesis around DIV_ROUND_UP macro hw/pci-host: Remove useless parenthesis around DIV_ROUND_UP macro tests/bios-tables-test: Remove an useless cast xen: Use the PCI_DEVICE macro qobject: Catch another straggler for use of qdict_put_str() configure: Support pkg-config for zlib tests: Fix typos in comments and help message (found by codespell) cpu.h: fix a typo in comment linux-user: fix comment s/atomic_write/atomic_set/ qemu-iotests: make 218 executable scripts/qemu.py: remove trailing quotes on docstring scripts/decodetree.py: remove unused imports docs/devel/testing.rst: add missing newlines after code block qemu-iotests: fix filename containing checks tests/tcg/README: fix location for lm32 tests memory.h: fix typos in comments vga_int: remove unused function protype configs/alpha: Remove unused CONFIG_PARALLEL_ISA switch Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-30ppc: move at24c to its own CONFIG_ symbolPaolo Bonzini1-0/+1
AT24c EEPROM is currently gated by CONFIG_I2C, and as such it is being included in all emulators that use I2C, even if they do not really need it. Separate it and, since it was added for the e500 machines, add it to qemu-system-ppc and qemu-system-ppc64. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20180522191743.12872-1-pbonzini@redhat.com> [lv: rebase] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-10-26configs/alpha: Remove unused CONFIG_PARALLEL_ISA switchThomas Huth1-1/+0
We don't use CONFIG_PARALLEL_ISA in any of our Makefiles, so this is just a dead config option which can be removed. Fixes: a4cb773928e047b137c6998209cf2eec857fac6b Signed-off-by: Thomas Huth <thuth@redhat.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <1540376314-5727-1-git-send-email-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-10-25Merge remote-tracking branch ↵Peter Maydell3-3/+4
'remotes/ehabkost/tags/machine-next-pull-request' into staging Machine queue, 2018-10-25 * sysbus init/realize cleanups (Cédric Le Goater, Philippe Mathieu-Daudé) * memory-device refactoring (David Hildenbrand) * -smp: deprecate incorrect CPUs topology (Igor Mammedov) * -numa parsing cleanups (Markus Armbruster) * Fix hostmem-file memory leak (Zhang Yi) * Typo fix (Li Qiang) # gpg: Signature made Thu 25 Oct 2018 14:31:46 BST # gpg: using RSA key 2807936F984DC5A6 # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/machine-next-pull-request: (43 commits) net: xgmac: convert SysBus init method to a realize method net: stellaris_enet: add a reset method net: stellaris_enet: convert SysBus init method to a realize method net: smc91c111: convert SysBus init method to a realize method net: opencores_eth: convert SysBus init method to a realize method net: mipsnet: convert SysBus init method to a realize method net: milkymist_minimac2: convert SysBus init method to a realize method net: lance: convert SysBus init method to a realize method net: lan9118: convert SysBus init method to a realize method net: etraxfs_eth: add a reset method net: etraxfs_eth: convert SysBus init method to a realize method memory-device: trace when pre_plugging/plugging/unplugging memory-device: complete factoring out unplug handling memory-device: complete factoring out plug handling memory-device: complete factoring out pre_plug handling memory-device: add device class function set_addr() memory-device: drop get_region_size() memory-device: factor out get_memory_region() from pc-dimm memory-device: add and use memory_device_get_region_size() memory-device: document MemoryDeviceClass ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24memory-device: introduce separate config optionDavid Hildenbrand2-2/+4
Some architectures might support memory devices, while they don't support DIMM/NVDIMM. So let's - Rename CONFIG_MEM_HOTPLUG to CONFIG_MEM_DEVICE - Introduce CONFIG_DIMM and use it similarly to CONFIG NVDIMM CONFIG_DIMM and CONFIG_NVDIMM require CONFIG_MEM_DEVICE. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20181005092024.14344-7-david@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-24hw/sparc64/niagara: Model the I/O Bridge with the 'unimplemented_device'Philippe Mathieu-Daudé1-1/+0
Since the I/O Bridge device is not implemented, Use the TYPE_UNIMPLEMENTED_DEVICE which suits better: if the user asks for 'unimp' warnings via the -d option then all accesses will generate logging. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com> Message-Id: <20181002212522.23303-10-f4bug@amsat.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-24configs: Add a CONFIG_SMC37C669 switch for the "smc37c669-superio" deviceThomas Huth1-0/+1
This device is not user-creatable and currently only used for the "alpha" target. So if the user does not want to compile alpha-softmmu, we should also not compile this device. Add a proper config switch to be able to compile this more flexibly. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-10-19default-configs: collect CONFIG_HYPERV* in hyperv.makRoman Kagan2-1/+3
Accumulate HYPERV config options in a dedicated file. There are only two so far; more will be added later. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20180921082041.29380-5-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-15display: add separate config option for bochs-displayGerd Hoffmann1-0/+1
This allows modern architectures which don't care about vga compatibility (risc-v for example) build bochs-display without including all vga emulation too. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20181005160147.892-2-kraxel@redhat.com
2018-10-12s390x/vfio: ap: Introduce VFIO AP deviceTony Krowiak1-0/+1
Introduces a VFIO based AP device. The device is defined via the QEMU command line by specifying: -device vfio-ap,sysfsdev=<path-to-mediated-matrix-device> There may be only one vfio-ap device configured for a guest. The mediated matrix device is created by the VFIO AP device driver by writing a UUID to a sysfs attribute file (see docs/vfio-ap.txt). The mediated matrix device will be named after the UUID. Symbolic links to the $uuid are created in many places, so the path to the mediated matrix device $uuid can be specified in any of the following ways: /sys/devices/vfio_ap/matrix/$uuid /sys/devices/vfio_ap/matrix/mdev_supported_types/vfio_ap-passthrough/devices/$uuid /sys/bus/mdev/devices/$uuid /sys/bus/mdev/drivers/vfio_mdev/$uuid When the vfio-ap device is realized, it acquires and opens the VFIO iommu group to which the mediated matrix device is bound. This causes a VFIO group notification event to be signaled. The vfio_ap device driver's group notification handler will get called at which time the device driver will configure the the AP devices to which the guest will be granted access. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-Id: <20181010170309.12045-6-akrowiak@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> [CH: added missing g_free and device category] Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-09-25arm: Add Nordic Semiconductor nRF51 SoCJoel Stanley1-0/+1
The nRF51 is a Cortex-M0 microcontroller with an on-board radio module, plus other common ARM SoC peripherals. http://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.pdf This defines a basic model of the CPU and memory, with no peripherals implemented at this stage. Signed-off-by: Joel Stanley <joel@jms.id.au> Message-id: 20180831220920.27113-3-joel@jms.id.au Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: wrapped a few long lines] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-28ppc: Remove deprecated ppcemb targetThomas Huth1-23/+0
There is no known available OS for ppc around anymore that uses page sizes below 4k, so it does not make much sense that we keep wasting our time on building and testing the ppcemb-softmmu target. It has been deprecated since two releases, and nobody complained, so let's remove this now. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
generated by cgit v1.1 at 2024-12-25 17:17:45 +0000