aboutsummaryrefslogtreecommitdiff
path: root/default-configs/pci.mak
AgeCommit message (Collapse)AuthorFilesLines
2017-05-29xhci: add CONFIG_USB_XHCI_NEC optionGerd Hoffmann1-0/+1
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1451189 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20170517103313.8459-2-kraxel@redhat.com
2017-02-06Allow ISA bus to be configured outDavid Gibson1-0/+2
Currently, the code to handle the legacy ISA bus is always included in qemu. However there are lots of platforms that don't include ISA legacy devies, and quite a few that have never used ISA legacy devices at all. This patch allows the ISA bus code to be disabled in the configuration for platforms where it doesn't make sense. For now, the default configs are adjusted to include ISA on all platforms including PCI: anything with PCI can at least in principle add an i82378 PCI->ISA bridge. Also, CONFIG_IDE_CORE which is already in pci.mak requires ISA support. We also explicitly enable ISA on some other non-PCI platforms which include ISA devices: moxie, sparc and unicore32. We may want to pare this down in future. The platforms that will lose ISA by default are: cris, lm32, microblazeel, microblaze, openrisc, s390x, tricore, xtensaeb, xtensa. As far as I can tell none of these ever used ISA. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2017-02-06Split serial-isa into its own config optionDavid Gibson1-0/+1
At present, the core device model code for 8250-like serial ports (serial.c) and the code for serial ports attached to ISA-style legacy IO (serial-isa.c) are both controlled by the CONFIG_SERIAL variable. There are lots and lots of embedded platforms that have 8250-like serial ports but have never had anything resembling ISA legacy IO. Therefore, split serial-isa into its own CONFIG_SERIAL_ISA option so it can be disabled for platforms where it's not appropriate. For now, I enabled CONFIG_SERIAL_ISA in every default-config where CONFIG_SERIAL is enabled, excepting microblaze, or32, and xtensa. As best as I can tell, those platforms never used legacy ISA, and also don't include PCI support (which would allow connection of a PCI->ISA bridge and/or a southbridge including legacy ISA serial ports). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-02net: Introduce e1000e device emulationDmitry Fleytman1-0/+1
This patch introduces emulation for the Intel 82574 adapter, AKA e1000e. This implementation is derived from the e1000 emulation code, and utilizes the TX/RX packet abstractions that were initially developed for the vmxnet3 device. Although some parts of the introduced code may be shared with e1000, the differences are substantial enough so that the only shared resources for the two devices are the definitions in hw/net/e1000_regs.h. Similarly to vmxnet3, the new device uses virtio headers for task offloads (for backends that support virtio extensions). Usage of virtio headers may be forcibly disabled via a boolean device property "vnet" (which is enabled by default). In such case task offloads will be performed in software, in the same way it is done on backends that do not support virtio headers. The device code is split into two parts: 1. hw/net/e1000e.c: QEMU-specific code for a network device; 2. hw/net/e1000e_core.[hc]: Device emulation according to the spec. The new device name is e1000e. Intel specifications for the 82574 controller are available at: http://www.intel.com/content/dam/doc/datasheet/82574l-gbe-controller-datasheet.pdf Throughput measurement results (iperf2): Fedora 22 guest, TCP, RX 4 ++------------------------------------------+ | | | X X X X X 3.5 ++ X X X X | | X | | | 3 ++ | G | X | b | | / 2.5 ++ | s | | | | 2 ++ | | | | | 1.5 X+ | | | + + + + + + + + + + + + 1 ++--+---+---+---+---+---+---+---+---+---+---+ 32 64 128 256 512 1 2 4 8 16 32 64 B B B B B KB KB KB KB KB KB KB Buffer size Fedora 22 guest, TCP, TX 18 ++-------------------------------------------+ | X | 16 ++ X X X X X | X | 14 ++ | | | 12 ++ | G | X | b 10 ++ | / | | s 8 ++ | | | 6 ++ X | | | 4 ++ | | X | 2 ++ X | X + + + + + + + + + + + 0 ++--+---+---+---+---+----+---+---+---+---+---+ 32 64 128 256 512 1 2 4 8 16 32 64 B B B B B KB KB KB KB KB KB KB Buffer size Fedora 22 guest, UDP, RX 3 ++------------------------------------------+ | X | | 2.5 ++ | | | | | 2 ++ X | G | | b | | / 1.5 ++ | s | X | | | 1 ++ | | | | X | 0.5 ++ | | X | X + + + + + 0 ++-------+--------+-------+--------+--------+ 32 64 128 256 512 1 B B B B B KB Datagram size Fedora 22 guest, UDP, TX 1 ++------------------------------------------+ | X 0.9 ++ | | | 0.8 ++ | 0.7 ++ | | | G 0.6 ++ | b | | / 0.5 ++ | s | X | 0.4 ++ | | | 0.3 ++ | 0.2 ++ X | | | 0.1 ++ X | X X + + + + 0 ++-------+--------+-------+--------+--------+ 32 64 128 256 512 1 B B B B B KB Datagram size Windows 2012R2 guest, TCP, RX 3.2 ++------------------------------------------+ | X | 3 ++ | | | 2.8 ++ | | | 2.6 ++ X | G | X X X X X b 2.4 ++ X X | / | | s 2.2 ++ | | | 2 ++ | | X X | 1.8 ++ | | | 1.6 X+ | + + + + + + + + + + + + 1.4 ++--+---+---+---+---+---+---+---+---+---+---+ 32 64 128 256 512 1 2 4 8 16 32 64 B B B B B KB KB KB KB KB KB KB Buffer size Windows 2012R2 guest, TCP, TX 14 ++-------------------------------------------+ | | | X X 12 ++ | | | 10 ++ | | | G | | b 8 ++ | / | X | s 6 ++ | | | | | 4 ++ X | | | 2 ++ | | X X X | + X X + + X X + + + + + 0 X+--+---+---+---+---+----+---+---+---+---+---+ 32 64 128 256 512 1 2 4 8 16 32 64 B B B B B KB KB KB KB KB KB KB Buffer size Windows 2012R2 guest, UDP, RX 1.6 ++------------------------------------------X | | 1.4 ++ | | | 1.2 ++ | | X | | | G 1 ++ | b | | / 0.8 ++ | s | | 0.6 ++ X | | | 0.4 ++ | | X | | | 0.2 ++ X | X + + + + + 0 ++-------+--------+-------+--------+--------+ 32 64 128 256 512 1 B B B B B KB Datagram size Windows 2012R2 guest, UDP, TX 0.6 ++------------------------------------------+ | X | | 0.5 ++ | | | | | 0.4 ++ | G | | b | | / 0.3 ++ X | s | | | | 0.2 ++ | | | | X | 0.1 ++ | | X | X X + + + + 0 ++-------+--------+-------+--------+--------+ 32 64 128 256 512 1 B B B B B KB Datagram size Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com> Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-21event_notifier: Make event_notifier_init_fd() #ifdef CONFIG_EVENTFDMarkus Armbruster1-1/+1
Event notifiers are designed for eventfd(2). They can fall back to pipes, but according to Paolo, event_notifier_init_fd() really requires the real thing, and should therefore be under #ifdef CONFIG_EVENTFD. Do that. Its only user is ivshmem, which is currently CONFIG_POSIX. Narrow it to CONFIG_EVENTFD. Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1458066895-20632-6-git-send-email-armbru@redhat.com>
2016-02-09hw: Add support for LSI SAS1068 (mptsas) devicePaolo Bonzini1-0/+1
This adds the SAS1068 device, a SAS disk controller used in VMware that is oldish but widely supported and has decent performance. Unlike megasas, it presents itself as a SAS controller and not as a RAID controller. The device corresponds to the mptsas kernel driver in Linux. A few small things in the device setup are based on Don Slutz's old patch, but the device emulation was written from scratch based on Don's SeaBIOS patch and on the FreeBSD and Linux drivers. It is 2400 lines shorter than Don's patch (and roughly the same size as MegaSAS---also because it doesn't support the similar SPI controller), implements SCSI task management functions (with asynchronous cancellation), supports big-endian hosts, has complete support for migration and follows the QEMU coding standards much more closely. To write the driver, I first split Don's patch in two parts, with the configuration bits in one file and the rest in a separate file. I first left mptconfig.c in place and rewrote the rest, then deleted mptconfig.c as well. The configuration pages are still based mostly on VirtualBox's, though not exactly the same. However, the implementation is completely different. The contents of the pages themselves should not be copyrightable. Signed-off-by: Don Slutz <Don@CloudSwitch.com> Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-24config: enable ivshmem on POSIXMarc-André Lureau1-1/+1
ivshmem doesn't actually require kvm, so enable it when POSIX is enabled. (it is required however when ioeventfd is enabled) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2015-05-11rocker: add new rocker switch deviceScott Feldman1-0/+1
Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-27Give ivshmem its own config optionDavid Gibson1-0/+1
Currently the ivshmem device is built whenever both PCI and KVM support are included. This patch gives it its own config option to allow easier customization of whether to include it. It's enabled by default in the same circumstances as now - when both PCI and KVM are available. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-Id: <1425017077-18487-4-git-send-email-david@gibson.dropbear.id.au> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-02-13pci: Move PCI VGA to pci.makAlexander Graf1-0/+2
Every platform that supports PCI can also spawn the Bochs VGA PCI adapter. Move it to pci.mak to enable it for everyone. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-01-26hw: misc, add educational driverJiri Slaby1-0/+1
I am using qemu for teaching the Linux kernel at our university. I wrote a simple PCI device that can answer to writes/reads, generate interrupts and perform DMA. As I am dragging it locally over 2 years, I am sending it to you now. Signed-off-by: Jiri Slaby <jslaby@suse.cz> [Fix 32-bit compilation. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-15sdhci: Support SDHCI devices on PCIKevin O'Connor1-0/+2
Support for PCI devices following the "SD Host Controller Simplified Specification Version 2.00" spec. Signed-off-by: Kevin O'Connor <kevin@koconnor.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-17NVMe: Initial commit for new storage interfaceKeith Busch1-0/+1
Initial commit for emulated Non-Volatile-Memory Express (NVMe) pci storage device. NVMe is an open, industry driven storage specification defining an optimized register and command set designed to deliver the full capabilities of non-volatile memory on PCIe SSDs. Further information may be found on the organizations website at: http://www.nvmexpress.org/ This commit implements the minimum from the specification to work with existing drivers. Cc: Keith Busch <keith.busch@gmail.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-04-29audio: enable PCI audio cards for all PCI-enabled targetsPaolo Bonzini1-0/+3
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1366303444-24620-9-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-22Merge remote-tracking branch 'bonzini/scsi-next' into stagingAnthony Liguori1-0/+1
# By Paolo Bonzini (5) and others # Via Paolo Bonzini * bonzini/scsi-next: vhost-scsi-s390: new device supporting the tcm_vhost Linux kernel module vhost-scsi-ccw: new device supporting the tcm_vhost Linux kernel module vhost-scsi-pci: new device supporting the tcm_vhost Linux kernel module vhost-scsi: new device supporting the tcm_vhost Linux kernel module virtio: simplify Makefile conditionals virtio-scsi: create VirtIOSCSICommon vhost: Add vhost_commit callback for SeaBIOS ROM region re-mapping scsi: VMWare PVSCSI paravirtual device implementation scsi: avoid assertion failure on VERIFY command Message-id: 1366381460-6041-1-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-19scsi: VMWare PVSCSI paravirtual device implementationDmitry Fleytman1-0/+1
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com> Signed-off-by: Yan Vugenfirer <yan@daynix.com> [ Rename files to vmw_pvscsi, fix setting of hostStatus in pvscsi_request_cancelled - Paolo ] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-16pci: add pci test deviceMichael S. Tsirkin1-0/+1
This device is used for kvm unit tests, currently it supports testing performance of ioeventfd. Using updated kvm unittest, here's an example output: mmio-no-eventfd:pci-mem 8796 mmio-wildcard-eventfd:pci-mem 3609 mmio-datamatch-eventfd:pci-mem 3685 portio-no-eventfd:pci-io 5287 portio-wildcard-eventfd:pci-io 1762 portio-datamatch-eventfd:pci-io 1777 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-04-08hw: move watchdogs to hw/watchdog, configure via default-configs/Paolo Bonzini1-0/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-25VMXNET3 device implementationDmitry Fleytman1-0/+1
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com> Signed-off-by: Yan Vugenfirer <yan@daynix.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-14Add TEWS TPCI200 IndustryPack emulationAlberto Garcia1-0/+1
The TPCI200 is a PCI board that supports up to 4 IndustryPack modules. A new bus type called 'IndustryPack' has been created so any compatible module can be attached to this board. Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alberto Garcia <agarcia@igalia.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-22serial: add pci variantGerd Hoffmann1-0/+2
So we get a hot-pluggable 16550 uart. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-08-09esp: move PCI emulation to a new file esp-pci.cHervé Poussineau1-0/+1
sparc machines loose ability to instanciate PCI ESP SCSI adapter, which is not a big loose as they don't have PCI bus support. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-03esp: enable for all PCI machinesPaolo Bonzini1-0/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-08-03Revert "megasas: disable due to build breakage"Paolo Bonzini1-0/+1
This reverts commit 92336855975805d88c7979f53bc05c2d47abab04. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-07-09megasas: disable due to build breakageAnthony Liguori1-1/+0
The Buildbot has detected a new failure on builder default_i386_rhel61 while building qemu. Full details are available at: http://buildbot.b1-systems.de/qemu/builders/default_i386_rhel61/builds/304 The proper fix is non-trivial so let's disable the build by default until it's fixed properly. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-07-02megasas: LSI Megaraid SAS HBA emulationHannes Reinecke1-0/+1
This patch adds an emulation for the LSI Megaraid SAS 8708EM2 HBA. I've tested it to work with Linux, Windows Vista, and Windows7. Signed-off-by: Hannes Reinecke <hare@suse.de> [ Squashed trivial changes from Andreas Faerber, rebased over IOMMU and QBus changes - Paolo ] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-03-19get rid of CONFIG_VIRTIO_SCSIPaolo Bonzini1-1/+0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-02-22virtio-scsi: Add virtio-scsi stub deviceStefan Hajnoczi1-0/+1
Add a useless virtio SCSI HBA device: qemu -device virtio-scsi-pci Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-01-17xhci: Initial xHCI implementationHector Martin1-0/+1
Based on the implementation from Hector Martin <hector@marcansoft.com> Hectors's implementation completely sidestepped the qemu usb system and used libusb directly for usb device pass through. So I've ripped out the libusb bits (or left them in disabled, as reference for further coding) and hooked up the qemu subsystem instead. That work is not complete yet though, partly due to limitations of the qemu usb subsystem. Nevertheless I think it is better to continue development in-tree, especially as the qemu usb bits need a bunch of improvements too for decent usb 3.0 support. Current state: - usb-storage emulation should work ok. - Devices which need constant polling (HID emulation like usb-tablet) are known to not work. - ISO xfers are not implemented yet. - superspeed ports are not implemented yet. - usb pass-through is completely untested so far. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-05-26usb: add ehci adapterGerd Hoffmann1-0/+1
This patch finally merges the EHCI host adapter aka USB 2.0 support. Based on the ehci bits collected @ git://git.kiszka.org/qemu.git ehci EHCI has a long out-of-tree history. Project was started by Mark Burkley, with contributions by Niels de Vos. David S. Ahern continued working on it. Kevin Wolf, Jan Kiszka and Vincent Palatin contributed bugfixes. /me (Gerd Hoffmann) picked it up where it left off, prepared the code for merge, fixed a few bugs and added basic user docs. Cc: David S. Ahern <daahern@cisco.com> Cc: Jan Kiszka <jan.kiszka@web.de> Cc: Kevin Wolf <mail@kevin-wolf.de> Cc: Vincent Palatin <vincent.palatin_qemu@m4x.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2010-12-17config: add ahci for pci capable machinesAlexander Graf1-0/+1
This patch enables AHCI for all machines supporting PCI. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17config: move ide core and pci to pci.makAlexander Graf1-0/+3
Every device that can do PCI should also be able to do IDE. So let's move the IDE definitions over to pci.mak. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-11-27Split out common pcnet codePaul Brook1-0/+1
The core pcnet emulation code is used by both the PCI "pcnet" device and the SPARC "lance" device. Split the common code frm the PCI code so that that can be configures independantly. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-11-27Fix previous commitPaul Brook1-0/+11
Fix breakage from previous commit (missing pci.mak, and incorrect include in default-configs/s390x-softmmu.mak). Signed-off-by: Paul Brook <paul@codesourcery.com>
generated by cgit v1.1 at 2024-08-15 11:49:43 +0000