aboutsummaryrefslogtreecommitdiff
path: root/default-configs/mips64el-softmmu.mak
AgeCommit message (Collapse)AuthorFilesLines
2017-02-24hw/mips: MIPS Boston board supportPaul Burton1-0/+3
Introduce support for emulating the MIPS Boston development board. The Boston board is built around an FPGA & 3 PCIe controllers, one of which is connected to an Intel EG20T Platform Controller Hub. It is used during the development & debug of new CPUs and the software intended to run on them, and is essentially the successor to the older MIPS Malta board. This patch does not implement the EG20T, instead connecting an already supported ICH-9 AHCI controller. Whilst this isn't accurate it's enough for typical stock Boston software (eg. Linux kernels) to work with hard disks given that both the ICH-9 & EG20T implement the AHCI specification. Boston boards typically boot kernels in the FIT image format, and this patch will treat kernels provided to QEMU as such. When loading a kernel directly, the board code will generate minimal firmware much as the Malta board code does. This firmware will set up the CM, CPC & GIC register base addresses then set argument registers & jump to the kernel entry point. Alternatively, bootloader code may be loaded using the bios argument in which case no firmware will be generated & execution will proceed from the start of the boot code at the default MIPS boot exception vector (offset 0x1fc00000 into (c)kseg1). Currently real Boston boards are always used with FPGA bitfiles that include a Global Interrupt Controller (GIC), so the interrupt configuration is only defined for such cases. Therefore the board will only allow use of CPUs which implement the CPS components, including the GIC, and will otherwise exit with a message. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> [yongbok.kim@imgtec.com: isolated boston machine support for mips64el. updated for recent Chardev changes. ignore missing bios/kernel for qtest. added default -drive to if=ide explicitly. changed default memory size into 1G due to make check failure on 32-bit hosts] Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-02-23Revert "hw/mips: MIPS Boston board support"Peter Maydell1-3/+0
This reverts commit d3473e147a754e999718bf6fcb015d9978c6a1ee. This commit creates a board which defaults to having 2GB of RAM. Unfortunately on 32-bit hosts we can't create boards with 2GB of RAM, and so 'make check' fails. I missed this during testing of the merge, unfortunately. Luckily the offending commit is the last one in the merge request, so we can just revert it for now. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-21hw/mips: MIPS Boston board supportPaul Burton1-0/+3
Introduce support for emulating the MIPS Boston development board. The Boston board is built around an FPGA & 3 PCIe controllers, one of which is connected to an Intel EG20T Platform Controller Hub. It is used during the development & debug of new CPUs and the software intended to run on them, and is essentially the successor to the older MIPS Malta board. This patch does not implement the EG20T, instead connecting an already supported ICH-9 AHCI controller. Whilst this isn't accurate it's enough for typical stock Boston software (eg. Linux kernels) to work with hard disks given that both the ICH-9 & EG20T implement the AHCI specification. Boston boards typically boot kernels in the FIT image format, and this patch will treat kernels provided to QEMU as such. When loading a kernel directly, the board code will generate minimal firmware much as the Malta board code does. This firmware will set up the CM, CPC & GIC register base addresses then set argument registers & jump to the kernel entry point. Alternatively, bootloader code may be loaded using the bios argument in which case no firmware will be generated & execution will proceed from the start of the boot code at the default MIPS boot exception vector (offset 0x1fc00000 into (c)kseg1). Currently real Boston boards are always used with FPGA bitfiles that include a Global Interrupt Controller (GIC), so the interrupt configuration is only defined for such cases. Therefore the board will only allow use of CPUs which implement the CPS components, including the GIC, and will otherwise exit with a message. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> [yongbok.kim@imgtec.com: isolated boston machine support for mips64el. updated for recent Chardev changes. ignore missing bios/kernel for qtest. added default -drive to if=ide explicitly] Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2016-03-23default-configs: add mips-softmmu-common.makLeon Alrae1-30/+1
Add mips-softmmu-common.mak and include it in existing mips*-softmmu.mak files to avoid having to repeat CONFIG defines four times. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-06-11mips jazz: compile only in 64 bitHervé Poussineau1-0/+1
Remove now useless device models from other MIPS configurations We're now compiling 12 files less than before. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-05-29ACPI: split CONFIG_ACPI into 4 piecesShannon Zhao1-0/+3
As core.c, piix4.c, ich9.c and pcihp.c are for x86, add CONFIG_ACPI_X86 to make it only for x86. ARM doesn't support cpu and memory hotplug, add CONFIG_ACPI_CPU_HOTPLUG and CONFIG_ACPI_MEMORY_HOTPLUG to exclude them for target-arm. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1432522520-8068-24-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-13pci: Move PCI VGA to pci.makAlexander Graf1-2/+0
Every platform that supports PCI can also spawn the Bochs VGA PCI adapter. Move it to pci.mak to enable it for everyone. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-08-14mips_malta: do not raise exceptions when accessing invalid memoryAurelien Jarno1-0/+1
Since commit c658b94f6e8c206c59d02aa6fbac285b86b53d2c, MIPS raises exceptions when accessing invalid memory. This is not the correct behaviour for MIPS Malta Core LV, as the GT-64120A system controller just ignore undecoded access. This feature is used by the Linux kernel to probe for some devices. Emulate the correct behaviour in QEMU by adding an empty slot covering the entire memory space decoded by the GT-64120A. Tested-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-07-25default-configs: add test device to all machines supporting ISAPaolo Bonzini1-0/+1
This will let these machines run an endianness test for ISA I/O port space. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1374501278-31549-22-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-25isa_mmio: deletePaolo Bonzini1-1/+0
It is not used anymore. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1374501278-31549-15-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-29audio: replace audio card configuration with default-configsPaolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1366303444-24620-6-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-08hw: move ISA bridges and devices to hw/isa/, configure with default-configs/Paolo Bonzini1-0/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move MC146818RTC to hw/timer/, configure via default-configs/Paolo Bonzini1-0/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move target-independent files to subdirectoriesPaolo Bonzini1-1/+1
This patch tackles all files that are compiled once, moving them to subdirectories of hw/. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-02-19make usb devices configurableGerd Hoffmann1-0/+1
Leave the core usb devices (usb hub, tablet, mouse, keyboard) enabled unconditionally. Make the other ones configurable. Exceptions: - bluetooth: not qdevified yet, has a vl.c dependency because of that, thus disabling isn't as easy as not linking the object file. - smardcard: ccid-card-emulated depends on that one *and* CONFIG_SMARTCARD_NSS. So it isn't a one-liner and comes as separate patch because of that. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-02-22jazz-led: compile it only twiceHervé Poussineau1-0/+1
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-22vga: make Cirrus ISA device optionalBlue Swirl1-0/+2
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16i8259: Move to hw libraryJan Kiszka1-0/+1
No target-specific bits remaining, let's move it over. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10g364fb: compile in hwlibBlue Swirl1-0/+1
Compile g364fb in hwlib. Two compilations less for the full build. Acked-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-17config: move ide core and pci to pci.makAlexander Graf1-3/+0
Every device that can do PCI should also be able to do IDE. So let's move the IDE definitions over to pci.mak. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-11-27PCI config includePaul Brook1-2/+1
Split PCI config options into a separate file Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-07-03piix4: compile only onceBlue Swirl1-0/+1
Compile piix4 in hwlib. Two compilations less for the full build. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-29MIPS: Initial support of VIA IDE controller used by fulong mini pcHuacai Chen1-0/+1
Signed-off-by: Huacai Chen <zltjiangshi@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-29MIPS: Initial support of bonito north bridge used by fulong mini pcHuacai Chen1-0/+1
Signed-off-by: Huacai Chen <zltjiangshi@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-22Compile dma only onceBlue Swirl1-0/+1
Use a qemu_irq to request CPU exit. 7 compilations less for the full build. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-22Compile pckbd only onceBlue Swirl1-0/+1
Use a qemu_irq to indicate A20 line changes. Move I/O port 92 to pckbd.c. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-17Compile acpi_piix4, apm and pm_smbus only onceBlue Swirl1-0/+1
12 compilations less for the full build. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29Compile pflash_cfi01 only onceBlue Swirl1-0/+1
Push TARGET_WORDS_BIGENDIAN dependency to board level. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29Compile acpi only onceBlue Swirl1-0/+1
Use qemu_irqs to trigger CMOS S3 and SMI events. Avoid using kvm.h, which uses CPUState. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-27Compile vmware_vga only onceBlue Swirl1-0/+1
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-27Compile some MIPS devices only onceBlue Swirl1-0/+5
Move CPU specific declarations to a separate file. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-27Compile ide/core only onceBlue Swirl1-0/+1
Make win2k install hack unconditional as it is still restricted to x86 only in vl.c. Replace TARGET_PAGE_SIZE and 4096 with PAGE_SIZE. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-26target-s390: Don't compile in virtio-pciAlexander Graf1-0/+1
As soon as virtio-pci.c gets compiled and used on S390 the internal qdev magic gets confused and tries to give us PCI devices instead of S390 virtio devices. Since we don't have PCI on S390, we can safely not compile virtio-pci at all. In order to do this I added a new config option "CONFIG_VIRTIO_PCI" that I enabled for every platform except S390. Thanks to this the change should be a complete nop for every other platform. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-22Compile sound devices only onceBlue Swirl1-0/+1
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Compile serial only onceBlue Swirl1-0/+1
Push TARGET_WORDS_BIGENDIAN dependency to board level. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Compile ne2000_isa only onceBlue Swirl1-0/+1
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Compile fdc only onceBlue Swirl1-0/+1
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Compile most IDE devices only onceBlue Swirl1-0/+4
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Compile usb-uhci only onceBlue Swirl1-0/+1
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Compile vga-isa only onceBlue Swirl1-0/+1
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Compile pcspk only onceBlue Swirl1-0/+1
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Compile i8254 only onceBlue Swirl1-0/+1
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Compile parallel only onceBlue Swirl1-0/+1
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Compile vga-pci only onceBlue Swirl1-0/+1
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-10-08Only compile esp when one target uses itJuan Quintela1-0/+1
Patchworks-ID: 35206 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08Only compile isa_mmio when one target uses itJuan Quintela1-0/+2
Patchworks-ID: 35200 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08Add new config-devices.mak for each targetJuan Quintela1-0/+1
We generate config-devices.h from there automatically. We need to do it in main Makefile, because we are going to need a main Makefile for them. Patchworks-ID: 35196 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.1 at 2024-12-29 09:32:07 +0000