aboutsummaryrefslogtreecommitdiff
path: root/cputlb.c
AgeCommit message (Collapse)AuthorFilesLines
2014-01-13memory: split cpu_physical_memory_* functions to its own includeJuan Quintela1-0/+1
All the functions that use ram_addr_t should be here. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com>
2014-01-13memory: make cpu_physical_memory_reset_dirty() take a length parameterJuan Quintela1-2/+1
We have an end parameter in all the callers, and this make it coherent with the rest of cpu_physical_memory_* functions, that also take a length parameter. Once here, move the start/end calculation to tlb_reset_dirty_range_all() as we don't need it here anymore. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com>
2014-01-13memory: s/dirty/clean/ in cpu_physical_memory_is_dirty()Juan Quintela1-1/+2
All uses except one really want the other meaning. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com>
2014-01-13memory: cpu_physical_memory_mask_dirty_range() always clears a single flagJuan Quintela1-2/+2
Document it Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com>
2014-01-13memory: create function to set a single dirty bitJuan Quintela1-1/+1
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-12-23cputlb: Tidy memset() of arraysRichard Henderson1-1/+1
Don't duplicate the array length computation in the memset() when plain sizeof() can produce the correct results. Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-23cputlb: Use memset() when flushing entriesRichard Henderson1-17/+2
The size of tlb_table is 4k on a 64-bit host. For overwriting memory at this size, cacheline tricks can help. Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-10-07cputlb: Remove dead function tlb_update_dirty()liguang1-15/+0
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-09-03cpu: Use QTAILQ for CPU listAndreas Färber1-1/+1
Introduce CPU_FOREACH(), CPU_FOREACH_SAFE() and CPU_NEXT() shorthand macros. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09cpu: Make first_cpu and next_cpu CPUStateAndreas Färber1-1/+3
Move next_cpu from CPU_COMMON to CPUState. Move first_cpu variable to qom/cpu.h. gdbstub needs to use CPUState::env_ptr for now. cpu_copy() no longer needs to save and restore cpu_next. Acked-by: Paolo Bonzini <pbonzini@redhat.com> [AF: Rebased, simplified cpu_copy()] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-04memory: return MemoryRegion from qemu_ram_addr_from_hostPaolo Bonzini1-1/+1
It will be needed in the next patch. Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04exec: move qemu_ram_addr_from_host_nofail to cputlb.cPaolo Bonzini1-0/+11
After the next patch it would not be used elsewhere anyway. Also, the _nofail and the standard versions of this function return different things, which is confusing. Removing the function from the public headers limits the confusion. Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-28cpu: Turn cpu_unassigned_access() into a CPUState hookAndreas Färber1-6/+9
Use it for all targets, but be careful not to pass invalid CPUState. cpu_single_env can be NULL, e.g. on Xen. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-20exec: Resolve subpages in one step except for IOTLB fillsJan Kiszka1-2/+2
Except for the case of setting the IOTLB entry in TCG mode, we can avoid the subpage dispatching handlers and do the resolution directly on address_space_lookup_region. An IOTLB entry describes a full page, not only the region that the first access to a sub-divided page may return. This patch therefore introduces a special translation function, address_space_translate_for_iotlb, that avoids the subpage resolutions. In contrast, callers of the existing address_space_translate service will now always receive the terminal memory region section. This will be important for breaking the BQL and for enabling unaligned memory region. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-14cputlb: fix debug logsHervé Poussineau1-2/+2
'pd' variable has been removed in 06ef3525e1f271b6a842781a05eace5cf63b95c2. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-05-29memory: add address_space_translatePaolo Bonzini1-9/+11
Using phys_page_find to translate an AddressSpace to a MemoryRegionSection is unwieldy. It requires to pass the page index rather than the address, and later memory_region_section_addr has to be called. Replace memory_region_section_addr with a function that does all of it: call phys_page_find, compute the offset within the region, and check how big the current mapping is. This way, a large flat region can be written with a single lookup rather than a page at a time. address_space_translate will also provide a single point where IOMMU forwarding is implemented. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-05-29cputlb: simplify tlb_set_pagePaolo Bonzini1-8/+5
The same "if" condition is repeated twice. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-02-16cpu: Move current_tb field to CPUStateAndreas Färber1-2/+4
Explictly NULL it on CPU reset since it was located before breakpoints. Change vapic_report_tpr_access() argument to CPUState. This also resolves the use of void* for cpu.h independence. Change vAPIC patch_instruction() argument to X86CPU. Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-12-19exec: move include files to include/exec/Paolo Bonzini1-9/+9
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-23Rename target_phys_addr_t to hwaddrAvi Kivity1-2/+2
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are reserved) and its purpose doesn't match the name (most target_phys_addr_t addresses are not target specific). Replace it with a finger-friendly, standards conformant hwaddr. Outstanding patchsets can be fixed up with the command git rebase -i --exec 'find -name "*.[ch]" | xargs s/target_phys_addr_t/hwaddr/g' origin Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-22memory: per-AddressSpace dispatchAvi Kivity1-1/+2
Currently we use a global radix tree to dispatch memory access. This only works with a single address space; to support multiple address spaces we make the radix tree a member of AddressSpace (via an intermediate structure AddressSpaceDispatch to avoid exposing too many internals). A side effect is that address_space_io also gains a dispatch table. When we remove all the pre-memory-API I/O registrations, we can use that for dispatching I/O and get rid of the original I/O dispatch. Signed-off-by: Avi Kivity <avi@redhat.com>
2012-10-15memory: rename 'exec-obsolete.h'Avi Kivity1-2/+1
exec-obsolete.h used to hold pre-memory-API functions that were used from device code prior to the transition to the memory API. Now that the transition is complete, the name no longer describes the file. The functions still need to be merged better into the memory core, but there's no danger of anyone using them. Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-15Remove unused CONFIG_TCG_PASS_AREG0 and dead codeBlue Swirl1-5/+0
Now that CONFIG_TCG_PASS_AREG0 is enabled for all targets, remove dead code and support for !CONFIG_TCG_PASS_AREG0 case. Remove dyngen-exec.h and all references to it. Although included by hw/spapr_hcall.c, it does not seem to use it. Remove unused HELPER_CFLAGS. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-08-15cputlb.c: Fix out of date commentPeter Maydell1-1/+3
The comment about the return address from get_page_addr_code() was well out of date as phys_ram_base has not existed for some time. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-05-12cputlb: fix watchpoints handlingMax Filippov1-2/+2
Cleanup commit e554861766d9ae84dd5720baa4869f4ed711506f have changed code_address calculation in the tlb_set_page function in case of access to a page with a watchpoint. This caused QEMU segfault in the xtensa test_break unit test. Fix it by moving code_address assignment above memory_region_section_get_iotlb call. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-05-01cputlb: prepare private memory API for public consumptionBlue Swirl1-5/+7
Fold is_ram_rom and is_ram_rom_romd() into callers. Change is_romd() and section_addr() to take MemoryRegion instead of MemoryRegionSection for consistency and use memory_region_ prefix. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-05-01cputlb: move TLB handling to a separate fileBlue Swirl1-0/+362
Move TLB handling and softmmu code load helpers to cputlb.c, compile only for softmmu targets. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.1 at 2024-12-26 05:46:52 +0000