aboutsummaryrefslogtreecommitdiff
path: root/configure
AgeCommit message (Collapse)AuthorFilesLines
2014-07-10Enforce stack protector usageMiroslav Rezanina1-1/+8
If --enable-stack-protector is used is used, configure script try to use --fstack-protector-strong. In case it's not supported, --fstack-protector-all is enabled. If both protectors are not supported, configure does not use any protector at all without any notification. This patch reports error when user requests stack protector to be used and both protector modes are not supported. Behavior is not changed in case user do not use any of --enable-stack-protector/--disable-stack-protector. Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com> [Fix non-POSIX operator in test. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-01net: add mmsghdr struct check for L2TPV3Gonglei1-0/+16
The mmsghdr struct is only introduced in Linux 2.6.32; add a configure check for it and disable L2TPV3 on hosts which are too old to provide it, rather than simply failing to compile. Reported-by: chenliang <chenliang88@huawei.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1404219488-11196-1-git-send-email-arei.gonglei@huawei.com [PMM: cleaned up commit message and corrected kernel version number] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-01configure: Fix -lm test, so that tools can be compiled on hosts that require -lmAlexey Kardashevskiy1-1/+1
The existing test whether "-lm" needs to be included or not is insufficient as it reports false negative on Fedora20/ppc64. This happens because sin(0.0) is a constant value which compiler can safely throw away and therefore there is no need to add "-lm". As the result, qemu-nbd/qemu-io/qemu-img tools cannot compile. This adds a global variable and uses it in the test to prevent from optimization. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [Use Peter's improvement on the test to fool LTO, and remove the now useless -lm addition in Makefile.target. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-27configure: Enable out-of-tree iotestsMax Reitz1-0/+12
In order to allow out-of-tree iotests, create a symlink for the check script in the build tree. While doing so, also write configured options relevant to the iotests to common.env in the build tree; currently, this is the command to invoke Python 2. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-06-24configure: Enable TPM by default, add --disable-tpmCole Robinson1-1/+4
I don't see why tpm is disabled by default: it doesn't have any external dependencies, or change default behavior. Leaving it disabled is just going to cause it to bit rot. Enable it by default, and add a --disable-tpm option. Signed-off-by: Cole Robinson <crobinso@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-06-23tcg-ppc: Rename the tcg/ppc64 backendRichard Henderson1-2/+2
The other tcg backends that support 32- and 64-bit modes use the 32-bit name for the port. Follow suit. Tested-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-06-23tcg-ppc: Remove the backendRichard Henderson1-0/+2
Vectoring the 32-bit build to the ppc64 directory. Tested-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-06-20Merge remote-tracking branch 'remotes/kvm/uq/master' into stagingPeter Maydell1-1/+5
* remotes/kvm/uq/master: hw/mips: malta: Don't boot from flash with KVM T&E MAINTAINERS: Add entry for MIPS KVM target-mips: Enable KVM support in build system hw/mips: malta: Add KVM support hw/mips: In KVM mode, inject IRQ2 (I/O) interrupts via ioctls target-mips: Call kvm_mips_reset_vcpu() from mips_cpu_reset() target-mips: kvm: Add main KVM support for MIPS kvm: Allow arch to set sigmask length target-mips: get_physical_address: Add KVM awareness target-mips: get_physical_address: Add defines for segment bases hw/mips: Add API to convert KVM guest KSEG0 <-> GPA hw/mips/cputimer: Don't start periodic timer in KVM mode target-mips: Reset CPU timer consistently KVM: Fix GSI number space limit Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-20Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell1-0/+35
pc,pci,virtio,hotplug fixes, enhancements numa work by Hu Tao and others memory hotplug by Igor vhost-user by Nikolay, Antonios and others guest virtio announcements by Jason qtest fixes by Sergey qdev hotplug fixes by Paolo misc other fixes mostly by myself Signed-off-by: Michael S. Tsirkin <mst@redhat.com> * remotes/mst/tags/for_upstream: (109 commits) numa: use RAM_ADDR_FMT with ram_addr_t qapi/string-output-visitor: fix bugs tests: simplify code qapi: fix input visitor bugs acpi: rephrase comment qmp: add ACPI_DEVICE_OST event handling qmp: add query-acpi-ospm-status command acpi: implement ospm_status() method for PIIX4/ICH9_LPC devices acpi: introduce TYPE_ACPI_DEVICE_IF interface qmp: add query-memory-devices command numa: handle mmaped memory allocation failure correctly pc: acpi: do not hardcode preprocessor qmp: clean out whitespace qdev: recursively unrealize devices when unrealizing bus qdev: reorganize error reporting in bus_set_realized qapi: fix build on glib < 2.28 qapi: make string output visitor parse int list qapi: make string input visitor parse int list tests: fix memory leak in test of string input visitor hmp: add info memdev ... Conflicts: include/hw/i386/pc.h [PMM: fixed minor conflict in pc.h] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-19configure: add Linux libnuma detectionWanlong Gao1-0/+32
Add detection of libnuma (mostly contained in the numactl package) to the configure script. Can be enabled or disabled on the command line, default is use if available. Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19Add the vhost-user netdev backend to the command lineNikolay Nikolaev1-0/+3
The supplied chardev id will be inspected for supported options. Only a socket backend, with a set path (i.e. a Unix socket) and optionally the server parameter set, will be allowed. Other options (nowait, telnet) will make the chardev unusable and the netdev will not be initialised. Additional checks for validity: - requires `-numa node,memdev=..` - requires `-device virtio-net-*` The `vhostforce` option is used to force vhost-net when we deal with non-MSIX guests. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-06-18block/iscsi: bump libiscsi requirement to 1.9.0Peter Lieven1-36/+3
This patch lifts the minimum supported libiscsi version from 1.4.0 to 1.9.0 since the BUSY patch required that change. On one this allows us to remove all #ifdefs from the code which makes the code easier to maintain and read. On the other hand I would not recommend libiscsi prior to 1.8.0 for production use because the following important libiscsi fixes for deadlocks and protocol errors are missing prior to 1.8.0: dbe9a1e SOCKET queue cmd PDUs directly in waitpdu queue 30df192 DATA-OUT set pdu->cmdsn appropriately 548bd22 ISCSI fix broken send logic in iscsi_scsi_async_command 14bee10 RECONNECT do not increase CmdSN for immediate PDUs 1f4a66a PDU queue out PDUs in order of itt. 562dd46 PDU avoid incrementing itt to 0xffffffff cd09c0f PDU use serial32 arithmetic for cmdsn, maxcmdsn and expcmdsn. 89e918e SOCKET validate data_size in in_pdu header 91267f5 Limit immediate and unsolicited data to FirstBurstLength Note that libiscsi 1.9.0 was released on Feb 24th, 2013, about one month after 1.8.0. Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-18target-mips: Enable KVM support in build systemSanjay Lal1-1/+5
Enable KVM support for MIPS in the build system. Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-16Merge remote-tracking branch 'remotes/agraf/tags/signed-ppc-for-upstream' ↵Peter Maydell1-0/+7
into staging Patch queue for ppc - 2014-06-16 This pull request brings a lot of fun things. Among others we have - e500: u-boot firmware support - sPAPR: magic page enablement - sPAPR: add "compat" CPU option to support older guests - sPAPR: refactorings in preparation for VFIO - POWER8 live migration - mac99: expose bus frequency - little endian core dump, gdb and disas support - new ppc64le-linux-user target - DFP emulation - bug fixes # gpg: Signature made Mon 16 Jun 2014 12:28:32 BST using RSA key ID 03FEDC60 # gpg: Can't check signature: public key not found * remotes/agraf/tags/signed-ppc-for-upstream: (156 commits) spapr_pci: Advertise MSI quota PPC: KVM: Make pv hcall endian agnostic powerpc: use float64 for frsqrte spapr: Add kvm-type property spapr: Create SPAPRMachine struct linux-user: Tell guest about big host page sizes spapr_hcall: Add address-translation-mode-on-interrupt resource in H_SET_MODE spapr_hcall: Split h_set_mode() target-ppc: Enable DABRX SPR and limit it to <=POWER7 target-ppc: Enable PPR and VRSAVE SPRs migration target-ppc: Add POWER8's Event Based Branch (EBB) control SPRs KVM: target-ppc: Enable TM state migration target-ppc: Add POWER8's TM SPRs target-ppc: Add POWER8's MMCR2/MMCRS SPRs target-ppc: Enable FSCR facility check for TAR target-ppc: Add POWER8's FSCR SPR target-ppc: Add POWER8's TIR SPR target-ppc: Refactor class init for POWER7/8 target-ppc: Switch POWER7/8 classes to use correct PMU SPRs target-ppc: Make use of gen_spr_power5p_lpar() for POWER7/8 ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-16target-ppc: Add a new user mode target for little-endian PPC64.Doug Kwan1-0/+6
Signed-off-by: Doug Kwan <dougkwan@google.com> Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16PPC: Add u-boot firmware for e500Alexander Graf1-0/+1
This adds a special build of u-boot tailored for the e500 platforms we emulate. It is based on the current version of upstream u-boot which contains all the code necessary to drive our QEMU provided machines. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16configure: Enable dead code (lzo, snappy, quorum)Stefan Weil1-15/+24
Those options were not enabled by default, even when the build environment would have supported them, so the corresponding code was not compiled in normal test builds like on build bots. [Building quorum by default "broke" qemu-iotests ./check 081. It turns out the 081.out master output was just bitrotted. Fix this by updating the error message. --Stefan] Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-12Merge remote-tracking branch 'remotes/kraxel/tags/pull-gtk-20140611-1' into ↵Peter Maydell1-0/+4
staging gtk: misc fixes & cleanups. # gpg: Signature made Wed 11 Jun 2014 13:28:12 BST using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-gtk-20140611-1: gtk: update window size after showing/hiding tabs gtk: factor out gtk3 grab into the new gd_grab_devices function gtk: cleanup backend dependencies gtk: factor out keycode mapping Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-11Merge remote-tracking branch 'remotes/pmaydell/tags/pull-bsd-user-20140611' ↵Peter Maydell1-0/+11
into staging bsd-user queue: * build fixes * improvements to strace # gpg: Signature made Wed 11 Jun 2014 15:23:40 BST using RSA key ID 14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" * remotes/pmaydell/tags/pull-bsd-user-20140611: bsd-user: Fix syscall format, add strace support for more syscalls bsd-user: Implement strace support for thr_* syscalls bsd-user: Implement strace support for extattr_* syscalls bsd-user: Implement strace support for __acl_* syscalls bsd-user: Implement strace support for print_ioctl syscall bsd-user: Implement strace support for print_sysctl syscall bsd-user: GPL v2 attribution update and style bsd-user: add HOST_VARIANT_DIR for various *BSD dependent code exec: replace ffsl with ctzl vhost: replace ffsl with ctzl xen: replace ffsl with ctzl util/qemu-openpty: fix build with musl libc by include termios.h as fallback bsd-user/mmap.c: Don't try to override g_malloc/g_free util/hbitmap.c: Use ctpopl rather than reimplementing a local equivalent bsd-user: refresh freebsd system call numbers Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-11gtk: cleanup backend dependenciesGerd Hoffmann1-0/+4
Make configure detect gtk x11 backend and link libX11 then. Make gtk backend specific code properly #ifdef'ed on the GTK_WINDOWING_* backends at runtime). Our gtk ui code should build and run fine on any platform now. This also fixes the linker failute due to the new XkbGetKeyboard call added by commit 3158a3482b0093e41f2b2596fba50774ea31ae08. Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
2014-06-11bsd-user: add HOST_VARIANT_DIR for various *BSD dependent codeStacey Son1-0/+11
This change adds HOST_VARIANT_DIR so the various BSD OS dependent code can be separated into its own directories rather than using #ifdef's. This may also allow an BSD variant OS to host another BSD variant's executable as a target. Signed-off-by: Sean Bruno <sbruno@freebsd.org> Message-id: 1402246651-71099-2-git-send-email-sbruno@freebsd.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-10configure: unset interfering variablesCornelia Huck1-0/+5
The check for big or little endianness relies on grep reporting match/non-match on the generated binary. If the user specified --binary-files=without-match in their GREP_OPTIONS, this will fail. Let's follow what autoconf does and unset GREP_OPTIONS and CLICOLOR_FORCE at the beginning of the script. Reported-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-10configure: duplicate/incorrect order of -lrtRick Liu1-3/+3
'-lrt' flag duplication/incorrect order would cause 'undefined reference to clock_gettime' error during compilation time. Before fix: ... -o qemu-bridge-helper qemu-bridge-helper.o -lrt -pthread -lgthread-2.0 -lrt -lglib-2.0 After fix: ... -o qemu-bridge-helper qemu-bridge-helper.o -pthread -lgthread-2.0 -lrt -lglib-2.0 Reference: http://hi.baidu.com/sanitywolf/item/7a8b69c1e76dd220a0b50ab1 Signed-off-by: Rick Liu <yrliu.ca@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-09trace: Multi-backend tracingLluís Vilanova1-24/+23
Adds support to compile QEMU with multiple tracing backends at the same time. For example, you can compile QEMU with: $ ./configure --enable-trace-backends=ftrace,dtrace Where 'ftrace' can be handy for having an in-flight record of events, and 'dtrace' can be later used to extract more information from the system. This patch allows having both available without recompiling QEMU. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-05-27Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-2014-05-26' ↵Peter Maydell1-16/+35
into staging trivial patches for 2014-05-26 # gpg: Signature made Mon 26 May 2014 08:17:08 BST using RSA key ID A4C3D7DB # gpg: Can't check signature: public key not found * remotes/mjt/tags/trivial-patches-2014-05-26: (23 commits) libcacard: remove useless initializers net: cadence_gem: Fix top comment bsd-user: replace fprintf(stderr, ...) with error_report() audio: replace fprintf(stderr, ...) with error_report() in audio libcacard: fix wrong array expansion logic libcacard/vcard_emul_nss: Drop a redundant conditional libcacard: Convert two leftover realloc() to GLib libcacard/vreader: Tighten assertion to clarify intent libcacard/vreader: Drop broken recovery from failed assertion libcacard: Plug memory leaks around vreader_get_reader_list() libcacard/vscclient: Bury some dead code vl: fix 'name' option to work with -readconfig configure: Put tempfiles in a subdir of the build directory dma-helpers: avoid calling dma_bdrv_unmap() twice arch_init: replace fprintf(stderr, ...) with error_report() pci: move dereferencing of root only after verifying valid root pointer jazz_led: Add missing break in switch case bswap.h: Rename ldl_p, stl_p, etc to ldl_he_p, stl_he_p, etc configure: Automatically select GTK+ 3.0 if GTK+ 2.0 is unavailable nbd: Miscellaneous typo fixes. ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-24tcg-mips: Layout executable and code_gen_bufferRichard Henderson1-2/+5
Choosing good addresses for them means we can use JAL for helper calls. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24configure: Put tempfiles in a subdir of the build directoryPeter Maydell1-13/+16
When libtool support was added to configure, the new temporary files were left out of the list of files cleaned up on exit; this results in a lot of stale .lo files being left around in /tmp. Worse, libtool creates a /tmp/.libs directory which we can't easily clean up. Put all our temporary files in a single temporary directory created as a subdirectory of the build directory, so we can easily clean it up, and don't need fragile or complicated code for creation to avoid it clashing with temporary directories from other instances of QEMU configure or being subject to attack from adversaries who can write to /tmp. Since the temporaries now live in the build tree, we have no need to jump through hoops with a trap handler to try to remove them when configure exits; this fixes some weird bugs where hitting ^C during a configure run wouldn't actually make it stop, because we would run the trap handler but then not stop. (It is possible to get the trap handler semantics right but it is convoluted largely because of bugs in dash, so it is simpler to just avoid it.) Note that "temporary files go in the build directory, not /tmp" is the way autoconf behaves. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-05-24configure: Automatically select GTK+ 3.0 if GTK+ 2.0 is unavailableStefan Weil1-3/+19
The configure option --with-gtkabi=3.0 is still supported, but no longer needed when GTK+-2.0 is missing. When no GTK+ ABI is selected by the user, configure first tries 2.0, then 3.0. For some platforms (e.g. Windows) newer binaries of GTK+ are only available for GTK+ 3.0. Now building on these platforms is a little bit easier. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-05-15Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-s390-20140515' into ↵Peter Maydell1-2/+2
staging tcg/s390 updates # gpg: Signature made Thu 15 May 2014 17:24:40 BST using RSA key ID 4DD0279B # gpg: Can't check signature: public key not found * remotes/rth/tags/pull-tcg-s390-20140515: tcg-s390: Implement direct chaining of TBs tcg-s390: Don't force -march=z990 tcg-s390: Improve setcond tcg-s390: Allow immediate operands to add2 and sub2 tcg-s390: Implement tcg_register_jit tcg-s390: Use more risbg in the tlb sequence tcg-s390: Move ldst helpers out of line tcg-s390: Convert to new ldst opcodes tcg-s390: Integrate endianness into TCGMemOp tcg-s390: Convert to TCGMemOp tcg-s390: Fix off-by-one in wraparound andi Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-15tcg-s390: Don't force -march=z990Richard Henderson1-2/+2
While we still require the LONG DISPLACEMENT facility, defaults have moved on since then. Don't override the system compiler, whose default may be set to z9-109 or later. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-15Revert "iotests: Use configured python"Peter Maydell1-6/+0
This reverts commit f915db07ef9c368ea6db6430256de064fdd1525f. This commit is broken because it does not account for the build tree and the source tree being different, and can cause build failures for out-of-tree builds. Revert it until we can identify a better solution to the problem. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1400153676-30180-1-git-send-email-peter.maydell@linaro.org Acked-by: Kevin Wolf <kwolf@redhat.com>
2014-05-13Merge remote-tracking branch 'remotes/bonzini/configure' into stagingPeter Maydell1-10/+7
* remotes/bonzini/configure: libcacard: remove libcacard-specific CFLAGS and LIBS from global vars build: simplify and fix fix-obj-vars build: convert some obj-specific CFLAGS to use new foo.o-cflags syntax build: add support for per-object -cflags and -libs to all rules Makefile: use $(INSTALL_LIB) for modules not $(INSTALL_PROG) Makefile.target: use $(INSTALL_PROG) for installing, not $(INSTALL) Makefile: strip tools and modules too build: simplify Makefile.target around unnest-vars invocations build: simplify Makefile.target a bit, use just one rule for softmmu build: Fix per-object variables for Makefile.target Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-09libcacard: remove libcacard-specific CFLAGS and LIBS from global varsMichael Tokarev1-10/+7
Currently all what's needed for single file libcacard/vcard_emul_nss.c (libnss cflags) and hw/usb/ccid-card-emulated.c (libcacard includes) together with the libs is added to global QEMU_CFLAGS and libs_softmmu. Use the cflags only where really used (for two mentioned files), and libs only where needed. While at it, rename variables to better reflect reality: libcacard_* is really nss_*. This needs a bit more tweaking: $(NSS_LIBS) should not contain $glib_libs (ditto for _cflags). But in order to fix it, some more preparations should be made first. So add a FIXME comment. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-09iotests: Use configured pythonMax Reitz1-0/+6
Currently, QEMU's iotests rely on /usr/bin/env to start the correct Python (that is, at least Python 2.4, but not 3). On systems where Python 3 is the default, the user has no clean way of making the iotests use the correct binary. This commit makes the iotests use the Python selected by configure. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-05-08Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' ↵Peter Maydell1-0/+2
into staging Tracing pull request # gpg: Signature made Wed 07 May 2014 18:14:02 BST using RSA key ID 81AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" * remotes/stefanha/tags/tracing-pull-request: configure: Show trace output file conditionally trace: [tracetool] Minimize the amount of per-backend code trace: [simple] Bump up log version number trace: [tracetool] Change format docs to point to the generated file trace: [tracetool] Show list of frontends and backends sorted by name trace: [tracetool] Cosmetic changes trace: [tracetool] Spacing changes trace: [tracetool] Add methods 'Event.copy' and 'Arguments.copy' trace: [tracetool] Add method 'Event.api' to build event names Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-07Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-2014-05-07' ↵Peter Maydell1-1/+1
into staging trivial patches for 2014-05-07 # gpg: Signature made Wed 07 May 2014 18:01:15 BST using RSA key ID A4C3D7DB # gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" # gpg: aka "Michael Tokarev <mjt@corpit.ru>" # gpg: aka "Michael Tokarev <mjt@debian.org>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5 # Subkey fingerprint: 6F67 E18E 7C91 C5B1 5514 66A7 BEE5 9D74 A4C3 D7DB * remotes/mjt/tags/trivial-patches-2014-05-07: (21 commits) libcacard: remove unnecessary EOL from debug prints docs/memory.txt: Fix document on MMIO operations readline: Sort completions before printing them. readline: use g_strndup instead of open-coding it qmp: report path ambiguity error libcacard: replace pstrcpy() with memcpy() glib: move g_poll() replacement into glib-compat.h do not call g_thread_init() for glib >= 2.31 hw/9pfs: Add include file for exported symbol xen: remove unused global, xen_xcg hw: Add missing 'static' attributes qemu-timer: Add missing 'static' attribute ui: Add missing 'static' attribute monitor: Add missing 'static' attribute hw/s390x: Add missing 'static' attribute hw/mips: Add missing 'static' and 'const' attributes hw/9pfs: Add missing 'static' attributes arch_init: Be sure of only one exit entry with DPRINTF() for ram_load() tests/tcg: Fix compilation of test_path qga: Fix typo (plural) in comment ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-07configure: Show trace output file conditionallyStefan Weil1-0/+2
It is only used with the simple trace backend. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-05-07configure: remove bashismMichael Tokarev1-1/+1
Commit e26110cfc67d48 added a check for shacmd to create a hash for modules. This check in configure is using bash construct &> to redirect both stdout and stderr, which does fun things on some shells. Get rid of it, use standard redirection instead. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Fam Zheng <famz@redhat.com>
2014-05-07configure: make source tree build more robustMichael S. Tsirkin1-2/+10
When source directory can be arrived at by two paths, configure might misdetect an out of tree build. The simplest way to trigger the problem is running configure using a full path. E.g. (<firstpath> refers to qemu source tree): ln -s <firstpath> <secondpath> cd <firstpath> <secondpath>/configure A more practical way is when make runs configure automatically: 1. cd <firstpath>/; ./configure SRC_PATH=<firstpath>/ is written into config_host.mak 2. cd <secondpath>/; touch configure; make make now runs <firstpath>/configure, so configure assumes it's an out of tree build When this happens configure overwrites parts of the current tree with symlinks. Make the test more robust: look for configure in the current directory. If there - we know it's a source build! Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-05-02linux-user: remove configure option for setting uname releaseRiku Voipio1-8/+0
--enable-uname-release was a rather heavyweight hammer, as it allows providing values less that UNAME_MINIMUM_RELEASE. Also, it affects all built linux-user targets, which in most cases is not what user wants. Now that we have UNAME_MINIMUM_RELEASE for all linux-user platforms, we can drop --enable-uname-release and the related CONFIG_UNAME_RELEASE define. Users can still override the variable with QEMU_UNAME=2.6.32 or -r command line option. If distributors need to update a minimum version for a specific target, it can be done by updating UNAME_MINIMUM_RELEASE. Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-04-29configure: Re-run make if gtkabi/sdlabi is changedCole Robinson1-0/+2
Reconfiguring with a different --with-gtkabi or --with-sdlabi doesn't trigger a remake. Generate an (unused) CONFIG_GTKABI/CONFIG_SDLABI so config-host.h will actually give 'make' something to trigger on. Signed-off-by: Cole Robinson <crobinso@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-04-29configure: Document --with-gtkabiCole Robinson1-0/+1
Signed-off-by: Cole Robinson <crobinso@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-04-27configure: Improve help behaviorFam Zheng1-2/+5
Old: There are two paths to show help and exit 1, one is with "-h" or "--help", one is with invalid options. New: Show help and exit 0 for --help. On invalid option, don't show the long help and bury the early "ERROR:" line, just give a message pointing to --help. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-04-18configure: Remove redundant message for -WerrorStefan Weil1-1/+0
The compiler flag -Werror is printed (or not printed) as any other compiler flag which is part of QEMU_CFLAGS. Therefore an extra output line for -Werror is redundant and can be removed. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-04-18configure: Fix indentation of help for --enable/disable-debug-infoPeter Maydell1-2/+2
The help text for the --enable-debug-info and --disable-debug-info command line options was misindented: delete the stray extra space and bring it in to line with everything else. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-04-14configure: Make stack-protector test check both compile and linkPeter Maydell1-1/+4
Since we use the -fstack-protector argument at both compile and link time in the build, we must check that it works with both a compile and a link: * MacOSX only fails in the compile step, not linking * some gcc cross environments only fail at the link stage (if they require a libssp and it's not present for some reason) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1397232832-32301-1-git-send-email-peter.maydell@linaro.org Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2014-04-10configure: use do_cc when checking for -fstack-protector supportPeter Maydell1-1/+1
MacOSX clang silently swallows unrecognized -f options when doing a link with '-framework' also on the command line, so to detect support for the various -fstack-protector options we must do a plain .c to .o compile, not a complete compile-and-link. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 1397041487-28477-1-git-send-email-peter.maydell@linaro.org
2014-03-31configure: add option to disable -fstack-protector flagsSteven Noonan1-3/+15
The -fstack-protector flag family is useful for ensuring safety and for debugging, but has a performance impact. Here are some boot time comparisons of the various versions of -fstack-protector using qemu-system-arm on an x86_64 host: # -fstack-protector-all Startup finished in 1.810s (kernel) + 12.331s (initrd) + 49.016s (userspace) = 1min 3.159s Startup finished in 1.801s (kernel) + 12.287s (initrd) + 47.925s (userspace) = 1min 2.013s Startup finished in 1.812s (kernel) + 12.302s (initrd) + 47.995s (userspace) = 1min 2.111s # -fstack-protector-strong Startup finished in 1.744s (kernel) + 11.223s (initrd) + 44.688s (userspace) = 57.657s Startup finished in 1.721s (kernel) + 11.222s (initrd) + 44.194s (userspace) = 57.138s Startup finished in 1.693s (kernel) + 11.250s (initrd) + 44.426s (userspace) = 57.370s # -fstack-protector Startup finished in 1.705s (kernel) + 11.409s (initrd) + 43.563s (userspace) = 56.677s Startup finished in 1.877s (kernel) + 11.137s (initrd) + 43.719s (userspace) = 56.734s Startup finished in 1.708s (kernel) + 11.141s (initrd) + 43.628s (userspace) = 56.478s # no stack protector Startup finished in 1.743s (kernel) + 11.190s (initrd) + 43.709s (userspace) = 56.643s Startup finished in 1.763s (kernel) + 11.216s (initrd) + 43.767s (userspace) = 56.747s Startup finished in 1.711s (kernel) + 11.283s (initrd) + 43.878s (userspace) = 56.873s This patch introduces a configure option to disable the stack protector entirely, and conditional stack protector flag selection (in order, based on availability): -fstack-protector-strong, -fstack-protector-all, no stack protector. Signed-off-by: Steven Noonan <snoonan@amazon.com> Cc: Anthony Liguori <aliguori@amazon.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> [Prefer -fstack-protector-all to -fstack-protector, suggested by Laurent Desnogues. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-28Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell1-0/+28
acpi,pc,build bug fixes Here are some bugfixes for 2.0. A bugfix for acpi for pci bridges, and a build fix for old systems without pthread_setname_np: both fix regressions so we definitely want to include them. HPET fix is not for a regression but looks very safe, fixes a nasty bug and has been on list for a while. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri 28 Mar 2014 12:00:12 GMT using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: acpi: fix ACPI generation for pci bridges Don't enable a HPET timer if HPET is disabled Detect pthread_setname_np at configure time Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-27Detect pthread_setname_np at configure timeDr. David Alan Gilbert1-0/+28
Warn if no way of setting thread name is available. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>