aboutsummaryrefslogtreecommitdiff
path: root/configure
AgeCommit message (Collapse)AuthorFilesLines
2010-01-26Enable _FORTIFY_SOURCE=2Kirill A. Shutemov1-1/+1
_FORTIFY_SOURCE is a Glibc feature which adds memory and string function protection. Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-24Support --sysconfdir in configure to specify path to configuration filesAnthony Liguori1-0/+17
The default value is ${prefix}/etc/qemu. --sysconfdir can be used to override the default to an absolute path. The expectation is that when installed to /usr, --sysconfdir=/etc/qemu will be used. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-13use pkg-config for libcurl whenever availablePaolo Bonzini1-2/+8
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-13use pkg-config for sdl whenever availablePaolo Bonzini1-4/+10
Together with the first patch this enables using the prefixed pkg-config, thus picking up the correct flags for SDL. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-13fixes to the static compilation case for sdlPaolo Bonzini1-3/+3
After the next commit, pkg-config could be used for the shared library configuration case and sdl-config for static libraries. So I prepare the test here by doing two changes: at the same time I remove useless backslashes from the invocation of grep; 1) fixing a typo ($sd_cflags). The typo has been there since commit 1ac88f2 (remove sdl_static. Just do the right thing if static is yes, 2009-07-27). 2) fixing an erroneous "test `... | grep > /dev/null`" idiom that would never succeed since grep's output would be empty; 3) checking the status code after executing sdl-config --static --libs; this is needed for the next patch only. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-13use cross-prefix for pkgconfigPaolo Bonzini1-5/+14
Since pkgconfig can give different output for different targets, it should be tried with the cross-compilation prefix first. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-12kvm: Detect availability of kvm_para.hJan Kiszka1-0/+11
Will be required for upcoming KVM cpuid leaf. Host kernels >= 2.6.32 as well as future kvm-kmod releases (more recent than kvm-kmod-2.6.32.3) do/will provide them. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-12kvm: Use kvm-kmod headers if availableJan Kiszka1-1/+1
Since kvm-kmod-2.6.32.2 we have an alternative source for recent KVM kernel headers. Use it when available and not overruled by --kerneldir. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-08finish VPATH -> vpath translationPaolo Bonzini1-3/+0
This adds a few more vpath suffixes and points the remaining two paths explicitly to $(SRC_PATH) in order to eliminate the VPATH assignment from config-host.mak. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-07Drop --whole-archive and static librariesAndreas Färber1-33/+1
Juan has contributed a cool Makefile infrastructure that enables us to drop static libraries completely: Move shared obj-y definitions to Makefile.objs, prefixed {common-,hw-,user-}, and link those object files directly into the executables. Replace HWLIB by HWDIR, specifying only the directory. Drop --whole-archive and ARLIBS in Makefiles and configure. Drop GENERATED_HEADERS dependency in rules.mak, since this rebuilds all common objects after generating a target-specific header; add dependency rules to Makefile and Makefile.target instead. v2: - Don't try to include /config.mak for user emulators - Changes to user object paths ("Quickfix for libuser.a drop") were obsoleted by "user_only: compile everything with -fpie" (Kirill A. Shutemov) v3: - Fix dependency modelling for tools - Remove comment on GENERATED_HEADERS obsoleted by this patch Signed-off-by: Andreas Färber <afaerber@opensolaris.org> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Palle Lyckegaard <palle@lyckegaard.dk> Cc: Ben Taylor <bentaylor.solx86@gmail.com> Cc: Juan Quintela <quintela@trasno.org> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-12-23Compile qemu-nbd also on OpenBSD and SolarisBlue Swirl1-1/+1
basename() needs #include <libgen.h>. No prototype for daemon() is available on Solaris, but link succeeds. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-12-19user_only: compile everything with -fpieKirill A. Shutemov1-0/+3
We really need compile _all_ sources for user target with -fpie when use --enable-user-pie. It's regression introduced by commit add16157d72454. Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-12-13target-alpha: Enable softfloat.Richard Henderson1-1/+1
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-12Do not abort on qemu_malloc(0) in production buildsAnthony Liguori1-1/+17
qemu_malloc() does not allow size=0 to be passed in and aborts on this behavior. Unfortunately, there is good reason to believe that within qemu, there are a number of, so far, undetected places that assume size=0 can be safely passed. Since we do not want to abort unnecessarily in production builds, return qemu_malloc(1) whenever the version file indicates that this is a production build. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-05Add KVM support for S390xAlexander Graf1-1/+3
S390x was one of the first platforms that received support for KVM back in the day. Unfortunately until now there hasn't been a qemu implementation that would enable users to actually run guests. So let's include support for KVM S390x in qemu! Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-05S/390 host/target build system supportAlexander Graf1-7/+15
This patch makes configure aware of S390 hosts and guests. When not explicitly defined using --target-list= no S390 targets will be built though. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-03Suppress optionrom build on Solaris x86Andreas Faerber1-1/+1
To avoid the build failing with: gcc -Wall -Wstrict-prototypes -Werror -fomit-frame-pointer -fno- builtin -I/export/home/andreas/QEMU/qemu -Wall -Wstrict-prototypes - Werror -fomit-frame-pointer -fno-builtin -I/export/home/andreas/QEMU/ qemu -c -o multiboot.o multiboot.S /var/tmp//ccd3aWyk.s: Assembler messages: /var/tmp//ccd3aWyk.s:15: Error: value of 512 too large for field of 1 bytes at 0000000000000002 gmake[1]: *** [multiboot.o] Error 1 disable recursion into pc-bios/optionrom, as done for Darwin already. Signed-off-by: Andreas Faerber <andreas.faerber@web.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03Don't leak file descriptorsKevin Wolf1-0/+20
We're leaking file descriptors to child processes. Set FD_CLOEXEC on file descriptors that don't need to be passed to children to stop this misbehaviour. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-02configure: use correct cflags in compiler checksMichael S. Tsirkin1-20/+21
linux-user build on fedora 11 breaks because fallocate is broken on that system if -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 are specified, which is what QEMU uses. We do have a configure check to catch this and disable fallocate, however, it turns out that default QEMU_CFLAGS/LDFLAGS were assigned in script *after* all compiler checks: so during checks we were not running compiler with same flags that we used for build later. Fix this by moving QEMU_CFLAGS to before compiler checks, and using comple_prog when checking for fallocate. This also fixes the fact that we do some compiler checks while assigning the flags, right below a comment that says "no cc tests beyond this point". Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-01tcg: initial mips supportAurelien Jarno1-1/+6
Based on a patch from Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> A few words about design choices: * Two registers, at and t0, are reserved for TCG internal use. They are useful for bswap and 64-bit ops. * Most ops supports a constant argument with value 0, which is actually mapped to the zero register. * While the at register is available for constant loading, ops only support a limited range of constants. TCG does a better job doing the register allocation and constant loading by itself. There are plenty of registers available anyway. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-11-29Add support for GNU/kFreeBSDAurelien Jarno1-1/+5
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-11-22Makefile dependencies for device configsPaul Brook1-4/+0
Add makefile dependencies for target specific device configs. These will copy the default config if none exists, obsoleting the old configure time code. If a config already exists but is older than the default then print a warning. Also remove config-devices.h. Code does not and should not care which devices are being built. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-11-21configure: Fix spelling in comment and rework the commentStefan Weil1-8/+10
* Replace vill -> will. * Comment was formatted to make it more readable and to conform to the coding standard, too. * Description of foo="" was completed. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-11-21qemu-io: build on all platformsAurelien Jarno1-4/+2
Since c32d766af127f68bb75ba5689f2f5239227bf559, qemu-io should be portable. It is currently built only on linux and mingw32. This patch enables qemu-io on all platforms. Tested on FreeBSD. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-11-18audio: link with -lpulse in addition to -lpulse-simpleAurelien Jarno1-2/+2
Link with -lpulse in addition to -lpulse-simple, needed when --no-add-needed is passed to the linker (gold default). Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-11-17Fix typoBlue Swirl1-1/+1
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-11-17Prevent configuring for a user emulator on a different type of OSBlue Swirl1-0/+12
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-11-17Add a unit test for JSON supportAnthony Liguori1-1/+1
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-17Add unit test for QFloatAnthony Liguori1-0/+1
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-17Cleanup configure checks for dup3 and fallocateJan Kiszka1-2/+2
We have a function for this which does not issue annoying warnings. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09Configurable block format whitelistMarkus Armbruster1-0/+7
We have code for a quite a few block formats. While I trust that all of these formats are useful at least for some people in some circumstances, some of them are of a kind that friends don't let friends use in production. This patch provides an optional block format whitelist, default off. If a whitelist is configured with --block-drv-whitelist, QEMU proper can use only whitelisted formats. Other programs, like qemu-img, are not affected. Drivers for formats off the whitelist still participate in format probing, to ensure all programs probe exactly the same. Without that, QEMU proper would be prone to treat images with a format off the whitelist as raw when the image's format is probed. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-02Fix the build when srcdir == objdirAnthony Liguori1-3/+3
You would only see this error on a fresh clone when srcdir == objdir. configure will fail because roms/pcbios doesn't exist. git submodule integration doesn't cleanup very well when switching between branches so you'll get an roms/pcbios directory from normal operations if you switch between old branches. Thanks to a mistake in configure, if you build outside of srcdir, you'll also get a valid roms/pcbios. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-30build: add CONFIG_LINUXMark McLoughlin1-0/+4
So I can add a tap-linux.c and use CONFIG_LINUX to pull it in in Makefile Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-30net: move net-queue.[ch] under net/Mark McLoughlin1-1/+1
[v2: handle building in a separate dir] Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-21Merge commit 'linux-user/linux-user-for-upstream' into stagingAnthony Liguori1-0/+36
2009-10-18Suppress warnings about 'warn_unused_result' attribute directiveBlue Swirl1-0/+20
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-10-15implementations of dup3 and fallocate that are good enough to fool LTPUlrich Hecht1-0/+36
updated fallocate check to new configure, added dup3 check as suggested by Jan-Simon Möller. Riku: updated to apply to current git. Signed-off-by: Ulrich Hecht <uli@suse.de> Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
2009-10-15configure: clean temporary executable files even on Windowsmalc1-1/+1
Signed-off-by: malc <av1474@comtv.ru>
2009-10-11Fix bswap in commentStefan Weil1-2/+2
Replace bsawp -> bswap. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-10-11Move dependency generation falgs out of configuremalc1-3/+2
Signed-off-by: malc <av1474@comtv.ru>
2009-10-11configure: clean up temporary dependency filesmalc1-1/+2
Signed-off-by: malc <av1474@comtv.ru>
2009-10-10Windows Waveform Audio driver (no ADC support yet)malc1-2/+14
Signed-off-by: malc <av1474@comtv.ru>
2009-10-08Introduce QList unit-testsLuiz Capitulino1-1/+1
This suite contains tests to assure that QList API works as expected. To execute it you should have check installed and build QEMU with check support enabled (--enable-check-utests) and then run: $ ./check-qlist Patchworks-ID: 35333 Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08Generate gdbstub-xml.c only when neededJuan Quintela1-1/+1
First user of new config-devices.mak Patchworks-ID: 35198 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08Add new config-devices.mak for each targetJuan Quintela1-0/+5
We generate config-devices.h from there automatically. We need to do it in main Makefile, because we are going to need a main Makefile for them. Patchworks-ID: 35196 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08Move generation of config-target.h to Makefile from configureJuan Quintela1-17/+0
Patchworks-ID: 35194 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08Rename config.{h, mak} config-target.{h, mak}Juan Quintela1-58/+58
Add config.h file that includes config-target.h and config-host.h Patchworks-ID: 35193 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08Move generation of config-host.h to Makefile from configureJuan Quintela1-19/+1
Use timestamp based appreach to avoid not needed recompilation. Add it to rules.mak Many thanks to Paolo Bonzini for helpding the design, and the debug. Patchworks-ID: 35190 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08Don't include config-host.mak from inside config.makJuan Quintela1-2/+0
Include it directly in Makefile.target Patchworks-ID: 35189 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06AIOLIBS is not used anywhereJuan Quintela1-1/+0
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.1 at 2024-10-17 06:35:34 +0000