aboutsummaryrefslogtreecommitdiff
path: root/configure
AgeCommit message (Collapse)AuthorFilesLines
2015-09-24oslib-win32: only provide localtime_r/gmtime_r if missingDaniel P. Berrange1-0/+34
The oslib-win32 file currently provides a localtime_r and gmtime_r replacement unconditionally. Some versions of Mingw-w64 would provide crude macros for localtime_r/gmtime_r which QEMU takes care to disable. Latest versions of Mingw-w64 now provide actual functions for localtime_r/gmtime_r, but with a twist that you have to include unistd.h or pthread.h before including time.h. By luck some files in QEMU have such an include order, resulting in compile errors: CC util/osdep.o In file included from include/qemu-common.h:48:0, from util/osdep.c:48: include/sysemu/os-win32.h:77:12: error: redundant redeclaration of 'gmtime_r' [-Werror=redundant-decls] struct tm *gmtime_r(const time_t *timep, struct tm *result); ^ In file included from include/qemu-common.h:35:0, from util/osdep.c:48: /usr/i686-w64-mingw32/sys-root/mingw/include/time.h:272:107: note: previous definition of 'gmtime_r' was here In file included from include/qemu-common.h:48:0, from util/osdep.c:48: include/sysemu/os-win32.h:79:12: error: redundant redeclaration of 'localtime_r' [-Werror=redundant-decls] struct tm *localtime_r(const time_t *timep, struct tm *result); ^ In file included from include/qemu-common.h:35:0, from util/osdep.c:48: /usr/i686-w64-mingw32/sys-root/mingw/include/time.h:269:107: note: previous definition of 'localtime_r' was here This change adds a configure test to see if localtime_r exits, and only enables the QEMU impl if missing. We also re-arrange qemu-common.h try attempt to guarantee that all source files get unistd.h before time.h and thus see the localtime_r/gmtime_r defs. [sw: Use "official" spellings for Mingw-w64, MinGW in comments.] [sw: Terminate sentences with a dot in comments.] Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Stefan Weil <sw@weilnetz.de>
2015-09-23libcacard: use the standalone projectMarc-André Lureau1-34/+18
libcacard is now a standalone project hosted with the Spice project (see the 2.5.0 release announcement), remove it from qemu tree. Use the library if found during configure or if --enable-smartcard. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-15Merge remote-tracking branch 'remotes/rth/tags/pull-tile-20150915' into stagingPeter Maydell1-0/+2
TileGX basic instructions # gpg: Signature made Tue 15 Sep 2015 15:57:08 BST using RSA key ID 4DD0279B # gpg: Good signature from "Richard Henderson <rth7680@gmail.com>" # gpg: aka "Richard Henderson <rth@redhat.com>" # gpg: aka "Richard Henderson <rth@twiddle.net>" * remotes/rth/tags/pull-tile-20150915: (35 commits) target-tilegx: Handle v1shl, v1shru, v1shrs target-tilegx: Handle v1shli, v1shrui target-tilegx: Handle v4int_l/h target-tilegx: Handle atomic instructions target-tilegx: Handle mtspr, mfspr target-tilegx: Handle v1cmpeq, v1cmpne target-tilegx: Handle mask instructions target-tilegx: Handle scalar multiply instructions target-tilegx: Handle conditional move instructions target-tilegx: Handle shift instructions target-tilegx: Handle bitfield instructions target-tilegx: Implement system and memory management instructions target-tilegx: Handle comparison instructions target-tilegx: Handle conditional branch instructions target-tilegx: Handle unconditional jump instructions target-tilegx: Handle post-increment load and store instructions target-tilegx: Handle basic load and store instructions target-tilegx: Handle most bit manipulation instructions target-arm: Use new revbit functions host-utils: Add revbit functions ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-15target-tilegx: Add TILE-Gx building filesChen Gang1-0/+2
Add related configuration and make files for tilegx. The target can now build, though not run anything. Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <BLU436-SMTP1588E5A03AD5E94B07E988B9660@phx.gbl> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-09-15ui: convert VNC server to use QCryptoTLSSessionDaniel P. Berrange1-31/+0
Switch VNC server over to using the QCryptoTLSSession object for the TLS session. This removes the direct use of gnutls from the VNC server code. It also removes most knowledge about TLS certificate handling from the VNC server code. This has the nice effect that all the CONFIG_VNC_TLS conditionals go away and the user gets an actual error message when requesting TLS instead of it being silently ignored. With this change, the existing configuration options for enabling TLS with -vnc are deprecated. Old syntax for anon-DH credentials: -vnc hostname:0,tls New syntax: -object tls-creds-anon,id=tls0,endpoint=server \ -vnc hostname:0,tls-creds=tls0 Old syntax for x509 credentials, no client certs: -vnc hostname:0,tls,x509=/path/to/certs New syntax: -object tls-creds-x509,id=tls0,dir=/path/to/certs,endpoint=server,verify-peer=no \ -vnc hostname:0,tls-creds=tls0 Old syntax for x509 credentials, requiring client certs: -vnc hostname:0,tls,x509verify=/path/to/certs New syntax: -object tls-creds-x509,id=tls0,dir=/path/to/certs,endpoint=server,verify-peer=yes \ -vnc hostname:0,tls-creds=tls0 This aligns VNC with the way TLS credentials are to be configured in the future for chardev, nbd and migration backends. It also has the benefit that the same TLS credentials can be shared across multiple VNC server instances, if desired. If someone uses the deprecated syntax, it will internally result in the creation of a 'tls-creds' object with an ID based on the VNC server ID. This allows backwards compat with the CLI syntax, while still deleting all the original TLS code from the VNC server. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-09-15crypto: add sanity checking of TLS x509 credentialsDaniel P. Berrange1-0/+22
If the administrator incorrectly sets up their x509 certificates, the errors seen at runtime during connection attempts are very obscure and difficult to diagnose. This has been a particular problem for people using openssl to generate their certificates instead of the gnutls certtool, because the openssl tools don't turn on the various x509 extensions that gnutls expects to be present by default. This change thus adds support in the TLS credentials object to sanity check the certificates when QEMU first loads them. This gives the administrator immediate feedback for the majority of common configuration mistakes, reducing the pain involved in setting up TLS. The code is derived from equivalent code that has been part of libvirt's TLS support and has been seen to be valuable in assisting admins. It is possible to disable the sanity checking, however, via the new 'sanity-check' property on the tls-creds object type, with a value of 'no'. Unit tests are included in this change to verify the correctness of the sanity checking code in all the key scenarios it is intended to cope with. As part of the test suite, the pkix_asn1_tab.c from gnutls is imported. This file is intentionally copied from the (long since obsolete) gnutls 1.6.3 source tree, since that version was still under GPLv2+, rather than the GPLv3+ of gnutls >= 2.0. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-09-14Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-40/+53
* Support for jemalloc * qemu_mutex_lock_iothread "No such process" fix * cutils: qemu_strto* wrappers * iohandler.c simplification * Many other fixes and misc patches. And some MTTCG work (with Emilio's fixes squashed): * Signal-free TCG kick * Removing spinlock in favor of QemuMutex * User-mode emulation multi-threading fixes/docs # gpg: Signature made Thu 10 Sep 2015 09:03:07 BST using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" * remotes/bonzini/tags/for-upstream: (44 commits) cutils: work around platform differences in strto{l,ul,ll,ull} cpu-exec: fix lock hierarchy for user-mode emulation exec: make mmap_lock/mmap_unlock globally available tcg: comment on which functions have to be called with mmap_lock held tcg: add memory barriers in page_find_alloc accesses remove unused spinlock. replace spinlock by QemuMutex. cpus: remove tcg_halt_cond and tcg_cpu_thread globals cpus: protect work list with work_mutex scripts/dump-guest-memory.py: fix after RAMBlock change configure: Add support for jemalloc add macro file for coccinelle configure: factor out adding disas configure vhost-scsi: fix wrong vhost-scsi firmware path checkpatch: remove tests that are not relevant outside the kernel checkpatch: adapt some tests to QEMU CODING_STYLE: update mixed declaration rules qmp: Add example usage of strto*l() qemu wrapper cutils: Add qemu_strtoull() wrapper cutils: Add qemu_strtoll() wrapper ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-10xen: use errno instead of rc for xc_domain_add_to_physmapKonrad Rzeszutek Wilk1-0/+1
In Xen 4.6 commit cd2f100f0f61b3f333d52d1737dd73f02daee592 "libxc: Fix do_memory_op to return negative value on errors" made the libxc API less odd-ball: On errors, return value is -1 and error code is in errno. On success the return value is either 0 or an positive value. Since we could be running with an old toolstack in which the Exx value is in rc or the newer, we add an wrapper around the xc_domain_add_to_physmap (called xen_xc_domain_add_to_physmap) which will always return the EXX. Xen 4.6 did not change the libxc functions mentioned (same parameters) so we piggyback on the fact that Xen 4.6 has a new function: commit 504ed2053362381ac01b98db9313454488b7db40 "tools/libxc: Expose new hypercall xc_reserved_device_memory_map" and check for that. Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Suggested-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen/HVM: atomically access pointers in bufioreq handlingJan Beulich1-0/+27
The number of slots per page being 511 (i.e. not a power of two) means that the (32-bit) read and write indexes going beyond 2^32 will likely disturb operation. The hypervisor side gets I/O req server creation extended so we can indicate that we're using suitable atomic accesses where needed, allowing it to atomically canonicalize both pointers when both have gone through at least one cycle. The Xen side counterpart (which is not a functional prereq to this change, albeit a build one) went in already (commit b7007bc6f9). Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-09configure: Add support for jemallocAlexandre Derumier1-0/+28
This adds "--enable-jemalloc" and "--disable-jemalloc" to allow linking to jemalloc memory allocator. We have already tcmalloc support, but it seem to not working well with a lot of iothreads/disks. The main problem is that tcmalloc use a shared thread cache of 16MB by default. With more threads, this cache is shared, and some bad garbage collections can occur if the cache is too low. It's possible to tcmalloc cache increase it with a env var: TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES=256MB With default 16MB, performances are really bad with more than 2 disks. Increasing to 256MB, it's helping but still have problem with 16 disks/iothreads. Jemalloc don't have performance problem with default configuration. Here the benchmark results in iops of 1 qemu vm randread 4K iodepth=32, with rbd block backend (librbd is doing a lot of memory allocation), 1 iothread by disk glibc malloc ------------ 1 disk 29052 2 disks 55878 4 disks 127899 8 disks 240566 15 disks 269976 jemalloc -------- 1 disk 41278 2 disks 75781 4 disks 195351 8 disks 294241 15 disks 298199 tcmalloc 2.2.1 default 16M cache -------------------------------- 1 disk 37911 2 disks 67698 4 disks 41076 8 disks 43312 15 disks 37569 tcmalloc : 256M cache --------------------------- 1 disk 33914 2 disks 58839 4 disks 148205 8 disks 213298 15 disks 218383 Signed-off-by: Alexandre Derumier <aderumier@odiso.com> Message-Id: <1434711418-20429-1-git-send-email-aderumier@odiso.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-09configure: factor out adding disas configurePeter Crosthwaite1-40/+25
Every arch adds its disas configury to both its own config as well config_disas_all. Make a small function do to both at once. Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-Id: <1440844439-19391-1-git-send-email-crosthwaite.peter@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-07s390x/gdb: support reading/writing of control registersDavid Hildenbrand1-1/+1
Let's support reading and writing of control registers for kvm and tcg. We have to take care of flushing the tlb (tcg) and pushing the changed registers into kvm. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-09-01build: qemu-ga: fix VSS dependenciesMichael Roth1-3/+2
Currently VSS dll/tlb files for use in w32 builds are only built as a result of having been added to the general 'tools' target alongside qemu-ga. This is fine for default make target, but if we build qemu-ga directly via `make qemu-ga.exe`, the VSS files are not created. Fix this by moving the VSS dependencies to qemu-ga.exe directly. With this move we can move the VSS files back out of 'tools', and drop the extra handling from MSI target in Makefile. Now we can build qemu-ga MSI package with: ./configure ... make qemu-ga.exe make msi or simply: ./configure ... make msi and no longer need to do a full build beforehand. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-09-01configure: qemu-ga: explicitly enable qemu-ga MSI support when probedMichael Roth1-2/+8
Currently, if we don't explicitly disable support for MSI installer via --disable-guest-agent-msi, the configure variable that tracks the flag, 'guest_agent_msi', never gets set unless one of the probes fails. Subsequent code then treats this unset value the same as if it were a "yes" value (via != "no" style checks). Instead, set the default "yes" value explicitly after the probes, then make subsequent code expect the values to be set. This makes it easier to report on whether or not MSI support was enabled via probe by looking at the ./configure summary. Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-09-01configure: qemu-ga: move MSI installer probe after qga probeMichael Roth1-52/+54
MSI probe assumes that qemu-ga support has been probed already, but in cases where --enable-guest-agent/--disable-guest-agent have not been passed to configure, qemu-ga support may end up getting enabled later, as is the case with w32 builds. This leads to MSI probe prematurely reporting error due to lack of qemu-ga support. Fix this by moving MSI installer probe after the final qga probes. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-09-01qemu-ga: implement win32 guest-set-user-passwordMarc-André Lureau1-1/+1
Use NetUserSetInfo() to set the user password. This function is notoriously known to be problematic for users with EFS encrypted files. But the alternative, NetUserChangePassword() requires the old password. Nevertheless, The EFS file should be recovered by changing back to the old password. Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-09-01configure: qemu-ga: report MSI install support in summaryMichael Roth1-0/+1
Currently we need to examine config-host.mak to determine whether options/probes for MSI package generation had desired result. Report this more prominently in ./configure summary as we do with other guest agent configure options. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-08-24linux-user: remove --enable-guest-base/--disable-guest-baseLaurent Vivier1-10/+0
All tcg host architectures now support the guest base and as there is no real performance lost, it can be always enabled. Anyway, guest base use can be disabled lively by setting guest base to 0. CONFIG_USE_GUEST_BASE is defined as (USE_GUEST_BASE && USER_ONLY), it should have to be replaced by CONFIG_USER_ONLY in non CONFIG_USER_ONLY parts, but as some other parts are using !CONFIG_SOFTMMU I have chosen to use !CONFIG_SOFTMMU instead. Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <1440373328-9788-2-git-send-email-laurent@vivier.eu> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-19configure: Don't permit SDL or GTK on OSXPeter Maydell1-4/+16
The cocoa GUI frontend assumes it is the only GUI (it redefines main() so it always gets control before the rest of QEMU), so it does not play well with other UIs like SDL or GTK. (Mostly people building QEMU on OSX don't have the necessary dependencies available for configure to build those other front ends, so mostly this problem goes unnoticed.) Make configure automatically disable the SDL and GTK front ends if the cocoa front end is enabled. (We were sort of attempting to do this for SDL before, but not in a way that worked very well.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: John Arbuckle <programmingkidx@gmail.com> Message-id: 1439565052-3457-1-git-send-email-peter.maydell@linaro.org
2015-08-18Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-4/+0
* SCSI fixes from Stefan and Fam * vhost-scsi fix from Igor and Lu Lina * a build system fix from Daniel * two more multi-arch-related patches from Peter C. * TCG patches from myself and Sergey Fedorov * RCU improvement from Wen Congyang * a few more simple cleanups # gpg: Signature made Fri 14 Aug 2015 22:41:52 BST using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: disas: Defeature print_target_address hw: fix mask for ColdFire UART command register scsi-generic: identify AIO callbacks more clearly scsi-disk: identify AIO callbacks more clearly scsi: create restart bottom half in the right AioContext configure: only add CONFIG_RDMA to config-host.h once qemu-nbd: remove unnecessary qemu_notify_event() vhost-scsi: Clarify vhost_virtqueue_mask argument exec: use macro ROUND_UP for alignment rcu: Allow calling rcu_(un)register_thread() during synchronize_rcu() exec: drop cpu_can_do_io, just read cpu->can_do_io cpu_defs: Simplify CPUTLB padding logic cpu-exec: Do not invalidate original TB in cpu_exec_nocache() vhost/scsi: call vhost_dev_cleanup() at unrealize() time virtio-scsi-test: Add test case for tail unaligned WRITE SAME scsi-disk: Fix assertion failure on WRITE SAME tests: virtio-scsi: clear unit attention after reset scsi-disk: fix cmd.mode field typo virtio-scsi: use virtqueue_map_sg() when loading requests Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-14configure: only add CONFIG_RDMA to config-host.h onceDaniel P. Berrange1-4/+0
For unknown reasons (probably a git rebase merge mistake) commit 2da776db4846eadcb808598a5d3484d149773c05 Author: Michael R. Hines <mrhines@us.ibm.com> Date: Mon Jul 22 10:01:54 2013 -0400 rdma: core logic Adds CONFIG_RDMA to config-host.h twice, as can be seen in the generated file: $ grep CONFIG_RDMA config-host.h #define CONFIG_RDMA 1 #define CONFIG_RDMA 1 Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1438345403-32467-1-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-08-03configure: Drop vnc-ws feature from help textAndreas Färber1-1/+0
Commit 8e9b0d2 (ui: convert VNC websockets to use crypto APIs) dropped the --enable-vnc-ws option but forgot to update the help text. Fix this. Cc: Daniel P. Berrange <berrange@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1437749257-3313-1-git-send-email-afaerber@suse.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-07-27configure: Work around broken static pkg-config info for Ubuntu gnutlsPeter Maydell1-1/+17
Unfortunately Ubuntu's pkg-config information for gnutls is broken for the static linking case, and outputs --libs options which the compiler does not recognize. Work around this problem by testing that the --cflags/--libs output will at least allow compilation before enabling gnutls support. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1437758888-22486-1-git-send-email-peter.maydell@linaro.org
2015-07-16crypto: fix build with nettle >= 3.0.0Radim Krčmář1-1/+3
In nettle 3, cbc_encrypt() accepts 'nettle_cipher_func' instead of 'nettle_crypt_func' and these two differ in 'const' qualifier of the first argument. The build fails with: In file included from crypto/cipher.c:71:0: ./crypto/cipher-nettle.c: In function ‘qcrypto_cipher_encrypt’: ./crypto/cipher-nettle.c:154:38: error: passing argument 2 of ‘nettle_cbc_encrypt’ from incompatible pointer type cbc_encrypt(ctx->ctx_encrypt, ctx->alg_encrypt, ^ In file included from ./crypto/cipher-nettle.c:24:0, from crypto/cipher.c:71: /usr/include/nettle/cbc.h:48:1: note: expected ‘void (*)(const void *, size_t, uint8_t *, const uint8_t *) but argument is of type ‘void (*)( void *, size_t, uint8_t *, const uint8_t *) To allow both versions, we switch to the new definition and #if typedef it for old versions. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Message-Id: <1436548682-9315-2-git-send-email-rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-08Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-56/+104
Bugfixes and Daniel Berrange's crypto library. # gpg: Signature made Wed Jul 8 12:12:29 2015 BST using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: ossaudio: fix memory leak ui: convert VNC to use generic cipher API block: convert qcow/qcow2 to use generic cipher API ui: convert VNC websockets to use crypto APIs block: convert quorum blockdrv to use crypto APIs crypto: add a nettle cipher implementation crypto: add a gcrypt cipher implementation crypto: introduce generic cipher API & built-in implementation crypto: move built-in D3DES implementation into crypto/ crypto: move built-in AES implementation into crypto/ crypto: introduce new module for computing hash digests vl: move rom_load_all after machine init done Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-07-08ui: convert VNC websockets to use crypto APIsDaniel P. Berrange1-18/+1
Remove the direct use of gnutls for hash processing in the websockets code, in favour of using the crypto APIs. This allows the websockets code to be built unconditionally removing countless conditional checks from the VNC code. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1435770638-25715-9-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-08block: convert quorum blockdrv to use crypto APIsDaniel P. Berrange1-38/+0
Get rid of direct use of gnutls APIs in quorum blockdrv in favour of using the crypto APIs. This avoids the need to do conditional compilation of the quorum driver. It can simply report an error at file open file instead if the required hash algorithm isn't supported by QEMU. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1435770638-25715-8-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-08crypto: add a nettle cipher implementationDaniel P. Berrange1-3/+32
If we are linking to gnutls already and gnutls is built against nettle, then we should use nettle as a cipher backend in preference to our built-in backend. This will be used when linking against some GNUTLS 2.x versions and all GNUTLS 3.x versions. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1435770638-25715-7-git-send-email-berrange@redhat.com> [Change "#elif" to "#elif defined". - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-08crypto: add a gcrypt cipher implementationDaniel P. Berrange1-0/+29
If we are linking to gnutls already and gnutls is built against gcrypt, then we should use gcrypt as a cipher backend in preference to our built-in backend. This will be used when linking against GNUTLS 1.x and many GNUTLS 2.x versions. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1435770638-25715-6-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-07qga: added GuestPCIAddress informationMichael Roth1-0/+1
PCIAddress inforfation is obtained via SetupApi, which provides the information about address, bus, etc. We look throught entire device tree in the system and try to find device object for given volume. For this PDO SetupDiGetDeviceRegistryProperty is called, which reads PCI configuration for a given devicei if it is possible. This is the most convinient way for a userspace service. The lookup is performed for every volume available. However, this information is not mandatory for vss-provider. In order to use SetupApi we need to notify linker about it. We do not need to install additional libs, so we do not make separate configuration option to use libsetupapi.su SetupApi gives as the same information as kernel driver with IRP_MN_QUERY_INTERFACE. https://support.microsoft.com/en-us/kb/253232 Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Eric Blake <eblake@redhat.com> CC: Michael Roth <mdroth@linux.vnet.ibm.com> * stub out get_pci_info if !CONFIG_QGA_NTDDSCSI Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-07-07configure: add configure check for ntdddisk.hMichael Roth1-0/+24
This header file provides w32 ioctl definitions for working with disk devices. Older versions of mingw do not expose this in a useable way, so add a configure check and report it via CONFIG_QGA_NTDDSCSI. Subsequent patches will use this macro to stub out functionality that relies on this in cases where it's not available. Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-07-07qga: add win32 library iphlpapiKirk Allan1-1/+1
Add the iphlpapi library to use APIs such as GetAdaptersInfo and GetAdaptersAddresses. Signed-off-by: Kirk Allan <kallan@suse.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-07-07crypto: introduce new module for computing hash digestsDaniel P. Berrange1-0/+45
Introduce a new crypto/ directory that will (eventually) contain all the cryptographic related code. This initially defines a wrapper for initializing gnutls and for computing hashes with gnutls. The former ensures that gnutls is guaranteed to be initialized exactly once in QEMU regardless of CLI args. The block quorum code currently fails to initialize gnutls so it only works by luck, if VNC server TLS is not requested. The hash APIs avoids the need to litter the rest of the code with preprocessor checks and simplifies callers by allocating the correct amount of memory for the requested hash. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1435770638-25715-2-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-26Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell1-1/+1
virtio, pci fixes, enhancements Almost exclusively bugfixes, though in this case, we are adding functionality to the pxb in order to make OVMF work on it. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri Jun 26 14:43:27 2015 BST using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: Fix glib_subprocess test hw/pci-bridge: format special OFW unit address for PXB host hw/core: explicit OFW unit address callback for SysBusDeviceClass hw/pci-bridge: disable SHPC in PXB hw/pci-bridge: introduce "shpc" property hw/pci: introduce shpc_present() helper function hw/pci-bridge: add macro for "msi" property hw/pci-bridge: add macro for "chassis_nr" property hw/pci-bridge: expose _test parameter in SHPC_VMSTATE() migration: introduce VMSTATE_BUFFER_UNSAFE_INFO_TEST() add pci-bridge-seat pc: cleanup and convert TMP ACPI device description to AML API MAINTAINERS: add ACPI entry vhost: correctly pass error to caller in vhost_dev_enable_notifiers() balloon: add a feature bit to let Guest OS deflate balloon on oom qdev: fix OVERFLOW_BEFORE_WIDEN virito-pci: fix OVERRUN problem Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-24Fix glib_subprocess testDr. David Alan Gilbert1-1/+1
A typo means that the tests dependent on glib with subprocess support are never run. Fixes: 9d41401b90fa10b335d2e739149d36437cfbf622 Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-23configure: rearrange --help and consolidate enable/disable togetherMichael Tokarev1-124/+75
This is an attempt to rearrange configure --help output a bit and consolidate pairs of --enable/disable into its own section. After this, help text is easier to sort, manage and read. More descriptive text can be added as well, since we now have more space. While at it, mention en/dis-able-vte. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-23configure: append --extra-ldflags to LDFLAGSAlex Bennée1-1/+1
The help text says --extra-ldflags is appended to LDFLAGS so make it so. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-17qemu-ga: Building Windows MSI installation with configure/MakefileYossi Hindin1-0/+66
New options were added to enable Windows MSI installation package creation: Option --enable-guest-agent-msi, like the name suggests, enables building Windows MSI package for QEMU guest agent; option --disable-guest-agent-msi disables MSI package creation; by default, no MSI package is created Signed-off-by: Yossi Hindin <yhindin@redhat.com> Message-Id: <1430913460-13174-5-git-send-email-yhindin@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-15only enable dsound in case the header file is presentGerd Hoffmann1-1/+13
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-06-15audio: remove winwave audio driverKővágó, Zoltán1-9/+4
DirectSound should be a superior choice on Windows. Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-06-15audio: remove fmod backendKővágó, Zoltán1-25/+2
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-06-15audio: remove esd backendKővágó, Zoltán1-12/+6
ESD is no longer developed and replaced by PulseAudio. Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-06-04Merge remote-tracking branch 'remotes/agraf/tags/signed-ppc-for-upstream' ↵Peter Maydell1-2/+4
into staging Patch queue for ppc - 2015-06-03 Highlights this time around: - sPAPR: endian fixes, speedups, bug fixes, hotplug basics - add default ram size capability for machines (sPAPR defaults to 512MB now) # gpg: Signature made Wed Jun 3 22:59:09 2015 BST using RSA key ID 03FEDC60 # gpg: Good signature from "Alexander Graf <agraf@suse.de>" # gpg: aka "Alexander Graf <alex@csgraf.de>" * remotes/agraf/tags/signed-ppc-for-upstream: (40 commits) softmmu: support up to 12 MMU modes tcg: add TCG_TARGET_TLB_DISPLACEMENT_BITS tci: do not use CPUArchState in tcg-target.h Add David Gibson for sPAPR in MAINTAINERS file pseries: Enable in-kernel H_LOGICAL_CI_{LOAD, STORE} implementations spapr: override default ram size to 512MB machine: add default_ram_size to machine class spapr_pci: emit hotplug add/remove events during hotplug spapr_pci: enable basic hotplug operations pci: make pci_bar useable outside pci.c spapr_pci: create DRConnectors for each PCI slot during PHB realize spapr_pci: add dynamic-reconfiguration option for spapr-pci-host-bridge spapr_drc: add spapr_drc_populate_dt() spapr_events: event-scan RTAS interface spapr_events: re-use EPOW event infrastructure for hotplug events spapr_rtas: add ibm, configure-connector RTAS interface spapr: add rtas_st_buffer_direct() helper spapr_rtas: add get-sensor-state RTAS interface spapr_rtas: add set-indicator RTAS interface spapr_rtas: add get/set-power-level RTAS interfaces ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-03configure: Check for libfdt version 1.4.0Thomas Huth1-2/+4
Some recent patches require a function from libfdt version 1.4.0, so we should check for this version during the configure step already. Unfortunately, there does not seem to be a proper #define for the version number in the libfdt headers. So alternatively, we check for the availability of the required function fdt_get_property_by_offset() instead instead. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-03configure: postfix --extra-cflags to QEMU_CFLAGSAlex Bennée1-1/+1
It makes sense that extra-cflags should be appended after the normal CFLAGS so they don't get overridden by default behaviour. This way if you specify something like: ./configure --extra-cflags="-O0" You will see the requested behaviour. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-05-29ui: add egl-helpersGerd Hoffmann1-1/+1
Add helper functions to initialize OpenGL using egl. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-05-29ui: use libexpoxyGerd Hoffmann1-2/+2
libepoxy does the opengl extension handling for us. It also is helpful for trouble-shooting as it prints nice error messages instead of silently failing or segfaulting in case we do something wrong, like using gl commands not supported by the current context. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-05-27s390x: gdb updates for vector registersEric Farman1-1/+1
gdb allows registers to be displayed/modified, and is being updated to account for the new vector registers. Mirror these changes in the gdb stub in qemu so that this can be performed when gdb is attached to the qemu gdbserver. Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-22configure: require glib 2.22John Snow1-6/+1
This provides g_ptr_array_new_with_free_func, as well as a few other functions that we've been hacking around in glib-compat.h. Cleaning up the compatibility headers will come later. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1431469140-22208-2-git-send-email-jsnow@redhat.com
2015-05-22configure: Add workaround for ccache and clangJohn Snow1-1/+33
Test if ccache is interfering with semantic analysis of macros, disable its habit of trying to compile already pre-processed versions of code if so. ccache attempts to save time by compiling pre-processed versions of code, but this disturbs clang's static analysis enough to produce false positives. ccache allows us to disable this feature, opting instead to compile the original version instead of its preprocessed version. This makes ccache much slower for cache misses, but at least it becomes usable with QEMU/clang. This workaround only activates for users using ccache AND clang, and only if their configuration is observed to be producing warnings. You may need to clear your ccache for builds started without -Werror, as those may continue to produce warnings from the cache. Thanks to Peter Eisentraut for his writeup on the issue: http://peter.eisentraut.org/blog/2014/12/01/ccache-and-clang-part-3/ Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1427324259-1481-5-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.1 at 2024-11-19 23:13:14 +0000