aboutsummaryrefslogtreecommitdiff
path: root/configure
AgeCommit message (Collapse)AuthorFilesLines
2013-06-11Remove OSS support for OpenBSDBrad Smith1-3/+2
Remove the OSS support for OpenBSD. The OSS API has not been usable for quite some time. Signed-off-by: Brad Smith <brad@comstyle.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com> (cherry picked from commit 4f6ab397b60615d2da77bff4f32666be9ac2e949) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2013-05-15w32: Fix configure test for -march=i486Stefan Weil1-0/+1
The latest version of MinGW needs a test for __sync_val_compare_and_swap to fix a missing symbol linker error. Reported-by: Igor Mitsyanko <i.mitsyanko@gmail.com> Signed-off-by: Stefan Weil <sw@weilnetz.de> Message-id: 1368301619-32097-2-git-send-email-sw@weilnetz.de Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-15configure: Detect uuid on MacOSX (fixes compile failure)Peter Maydell1-1/+5
Commit 7791dba3ec broke compilation on MacOSX, because it introduced a new include of util.h. On MacOSX this includes pwd.h which in turn includes the system uuid/uuid.h, which causes a compile failure if QEMU was configured without CONFIG_UUID due to a conflict between the system header and our fallback versions: block/vdi.c:124:20: error: static declaration of 'uuid_generate' follows non-static declaration static inline void uuid_generate(uuid_t out) ^ /usr/include/uuid/uuid.h:63:6: note: previous declaration is here void uuid_generate(uuid_t out); ^ Fix this breakage by improving configure's check for uuid to work on MacOSX (where there is no need to link in a separate libuuid). Note that if the user explicitly runs configure with '--disable-uuid' on MacOSX then QEMU will fail to compile. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1368563799-22755-1-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-13qom: allow turning cast debugging offPaolo Bonzini1-0/+9
Cast debugging can have a substantial cost (20% or more). Instead of adding special-cased "fast casts" in the hot paths, we can just disable it in releases. The tracing facilities we just added make it easier to analyze those problems that cast debugging would reveal. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1368188203-3407-7-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-06S390: BIOS create link to src folder for .img fileDominik Dingel1-0/+1
For *.img files, there will be a link created directly to the src folder, like for all other blobs. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-05-06configure: Check that "libtool" is not the MacOSX onePeter Maydell1-0/+8
The "libtool" binary on MacOSX is not GNU libtool, and doesn't support anything like the same set of command line options. Test whether we have accidentally picked this up (by looking for whether it handles the GNU --version switch), and discard it if so. The fallback machinery for the "we don't have a libtool" case will work fine. This fixes a failure in "make install" on MacOSX. Reported-by: Peter Cheung <mcheung63@hotmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1367701071-6630-1-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-03trace: Add ftrace tracing backendEiichi Tsukata1-0/+8
This patch adds a ftrace tracing backend which sends trace event to ftrace marker file. You can effectively compare qemu trace data and kernel(especially, kvm.ko when using KVM) trace data. The ftrace backend is restricted to Linux only. To try out the ftrace backend: $ ./configure --trace-backend=ftrace $ make if you use KVM, enable kvm events in ftrace: # sudo echo 1 > /sys/kernel/debug/tracing/events/kvm/enable After running qemu by root user, you can get the trace: # cat /sys/kernel/debug/tracing/trace Signed-off-by: Eiichi Tsukata <eiichi.tsukata.xh@hitachi.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-05-01configure: Pick up libseccomp include pathAndreas Färber1-0/+1
openSUSE 12.3 has seccomp.h in /usr/include/libseccomp-1.0.1, so add `pkg-config --cflags libseccomp` output to QEMU_CFLAGS. Cc: qemu-stable@nongnu.org Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-04-29audio: replace audio card configuration with default-configsPaolo Bonzini1-7/+0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1366303444-24620-6-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-29audio: remove CONFIG_* symbolsPaolo Bonzini1-9/+0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1366303444-24620-5-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-29audio: remove HAS_AUDIOPaolo Bonzini1-8/+0
Several targets can have wavcapture/-soundhw support via PCI cards. HAS_AUDIO is a useless limitation, remove it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1366303444-24620-4-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-29audio: remove the need for audio card CONFIG_* symbolsPaolo Bonzini1-7/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1366303444-24620-3-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-27tcg-arm: Convert to CONFIG_QEMU_LDST_OPTIMIZATIONRichard Henderson1-1/+1
Move the slow path out of line, as the TODO's mention. This allows the fast path to be unconditional, which can speed up the fast path as well, depending on the core. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-04-26s390-ccw.img: build s390-ccw rom on s3900 system by defaultChristian Borntraeger1-1/+6
Lets build the s390-ccw rom if on s390. Also fix the separate build folder case. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-26block/ssh: Require libssh2 >= 1.2.8.Richard W.M. Jones1-20/+4
libssh2 >= 1.2.8 is required to enable this block device (because that version introduced the libssh2_session_handshake call). Change the test to use pkg-config exclusively. If the user requests --enable-libssh2 and the minimum version is not available, then the following error is displayed: $ ./configure --enable-libssh2 ERROR: libssh2 >= 1.2.8 required for --enable-libssh2 If --enable-libssh2 is not specified, then the feature is silently disabled if sufficiently new libssh2 is not available. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-24build-sys: must link with -fstack-protectorMarc-André Lureau1-1/+7
It is needed to give that flag to the linker as well, but latest libtool 2.4.2 still swallows that argument, so let's pass it with libtool -Wc argument. qemu-1.4.0/stubs/arch-query-cpu-def.c:6: undefined reference to `__stack_chk_guard' Signed-off-by: Marc-André Lureau <mlureau@redhat.com> Reviewed-by: Alon Levy <alevy@redhat.com>
2013-04-23usb-host: raise libusbx minimum version to 1.0.13Gerd Hoffmann1-1/+1
Allows to remove one FIXME. Makes LIBUSB_LOG_LEVEL_WARNING build errors go away. And starting with that version libusb has a LIBUSBX_API_VERSION define which allows to easily #ifdef version dependencies should that need arrive in the future. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-19vhost-scsi: new device supporting the tcm_vhost Linux kernel moduleNicholas Bellinger1-0/+10
The WWPN specified in configfs is passed to "-device vhost-scsi-pci". The tgpt field of the SET_ENDPOINT ioctl is obsolete now, so it is not available from the QEMU command-line. Instead, I hardcode it to zero. Changes in Patch-v2: - Add vhost_scsi_get_features() in order to determine feature bits supports by host kernel (mst + nab) - Re-enable usage of DEFINE_VIRTIO_COMMON_FEATURES, and allow EVENT_IDX to be disabled by host in vhost_scsi_get_features() - Drop unused hotplug bit in DEFINE_VHOST_SCSI_PROPERTIES Changes in Patch-v1: - Set event_idx=off by default (nab, thanks asias) - Disable hotplug feature bit for v3.9 tcm_vhost kernel code, need to re-enable in v3.10 (nab) - Update to latest qemu.git/master HEAD Changes in WIP-V3: - Drop ioeventfd vhost_scsi_properties (asias, thanks stefanha) - Add CONFIG_VHOST_SCSI (asias, thanks stefanha) - Add hotplug feature bit Changes in WIP-V2: - Add backend guest masking support (nab) - Bump ABI_VERSION to 1 (nab) - Set up set_guest_notifiers (asias) - Set up vs->dev.vq_index (asias) - Drop vs->vs.vdev.{set,clear}_vhost_endpoint (asias) - Drop VIRTIO_CONFIG_S_DRIVER check in vhost_scsi_set_status (asias) Howto: Use the latest seabios, at least commit b44a7be17b git clone git://git.seabios.org/seabios.git make cp out/bios.bin /usr/share/qemu/bios.bin qemu -device vhost-scsi-pci,wwpn=naa.6001405bd4e8476d,event_idx=off ... Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Asias He <asias@redhat.com> [ Rebase on top of VirtIOSCSICommon patch, fix bugs in feature negotiation and irqfd masking - Paolo ] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-18configure: remove duplicate testPaolo Bonzini1-30/+26
We already had a test to add -march=i486 when needed. Make the existing test independent of vhost-net, so that it is also used under Win32. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18configure: CONFIG_NO_XEN is duplicatedPaolo Bonzini1-3/+0
We already define it in Makefile.target. But we need to avoid a curious double negation in order to eliminate it. Tested-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18configure: eliminate target_libs_softmmuPaolo Bonzini1-3/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18configure: move common libraries to config-host.makPaolo Bonzini1-1/+3
Move -lm to the end of the line, so that it can be picked up as a dependency by pixman in the static build case. Reviewed-by: Peter Maydell <peter.maydell@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18configure: move CONFIG_QEMU_LDST_OPTIMIZATION to config-host.makPaolo Bonzini1-9/+9
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18elfload: use abi_llong/ullong instead of target_llong/ullongPaolo Bonzini1-4/+0
The alignment is a characteristic of the ABI, not the CPU. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18elfload: only give abi_long/ulong the alignment specified by the targetPaolo Bonzini1-9/+0
Previously, this was done for target_long/ulong, and propagated to abi_long/ulong via a typedef. But target_long/ulong should not have any specific alignment, it is never used to access guest memory. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18elfload: use abi_int/uint instead of target_int/uintPaolo Bonzini1-3/+0
The alignment is a characteristic of the ABI, not the CPU. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18elfload: use abi_short/ushort instead of target_short/ushortPaolo Bonzini1-2/+0
The alignment is a characteristic of the ABI, not the CPU. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18configure: QEMU_INCLUDES are the same for all subtargetsPaolo Bonzini1-15/+13
Reviewed-by: Peter Maydell <peter.maydell@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18configure/Make: Build libfdt from submodule DTCPeter Crosthwaite1-5/+26
Configure to use the DTC submodule to build libfdt when no system libfdt is found. Prompt to install the DTC submodule if --enable-fdt is set but no DTC can be found. DTC has no out-of-tree build capability, so the configure will symlink the Makefile and scripts directory in the out of tree build directory and pass in all the needed DTC arguments to make out of tree build happen. Ideally we fix the DTC make to support out of tree, but did it this way to avoid commits to DTC. Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18configure: Put cross compile flags in EXTRA_CFLAGSPeter Crosthwaite1-6/+9
The cross compile CFLAGS are needed to properly build pixman (and any other submodules). Only the EXTRA_CFLAGS set is passed to submodules not QEMU_CFLAGS, so put the cross compile flags in EXTRA_CFLAGS instead. Signed-off-by: Peter Crosthwaite peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-17Fix warnings suppressors to honor --disable-werrorMarkus Armbruster1-0/+2
Replace #pragma GCC diagnostic ignored FOO [Troublesome code...] #pragma GCC diagnostic error FOO by #pragma GCC diagnostic push #pragma GCC diagnostic ignored FOO [Troublesome code...] #pragma GCC diagnostic pop Broken in commit 3f4349d, commit 092bb30, and commit c95e308. Signed-off-by: Markus Armbruster <armbru@redhat.com> Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1366113066-1340-1-git-send-email-armbru@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-17qtest: add libqos including PCI supportAnthony Liguori1-1/+1
This includes basic PCI support for the PC platform. Enough abstraction should be present to support non-PC platforms too. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1366123521-4330-3-git-send-email-aliguori@us.ibm.com
2013-04-16use libusb for usb-hostGerd Hoffmann1-0/+36
Reimplement usb-host on top of libusb. Reasons to do this: (1) Largely rewritten from scratch, nice opportunity to kill historical cruft. (2) Offload usbfs handling to libusb. (3) Have a single portable code base instead of bsd + linux variants. (4) Bring usb-host support to any platform supported by libusbx. For now this goes side-by-side to the existing code. That is only to simplify regression testing though, at the end of the day I want remove the old code and support libusb exclusively. Merge early in 1.5 cycle, remove the old code after 1.5 release or something like this. Thanks to qdev the old and new code can coexist nicely on linux. Just use "-device usb-host-linux" to use the old linux driver instead of the libusb one (which takes over the "usb-host" name). The bsd driver isn't qdev'ified so it isn't that easy for bsd. I didn't bother making it runtime switchable, so you have to rebuild qemu with --disable-libusb to get back the old code. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-15Merge remote-tracking branch 'bonzini/hw-dirs' into stagingAnthony Liguori1-10/+19
* bonzini/hw-dirs: exec: remove useless declarations from memory-internal.h memory: move core typedefs to qemu/typedefs.h include: avoid useless includes of exec/ headers sysemu: avoid proliferation of include/ subdirectories tpm: reorganize headers and split hardware part configure: fix TPM logic acpi.h: make it self contained acpi: move declarations from pc.h to acpi.h hw: Add lost ARM core again Fix failure to create q35 machine Add linux-headers to QEMU_INCLUDES arm: fix location of some include files Conflicts: configure aliguori: trivial conflict in configure output Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-15tcg-ppc64: Use getauxval for ISA detectionRichard Henderson1-0/+18
Glibc 2.16 includes an easy way to get feature bits previously buried in /proc or the program startup auxiliary vector. Use it. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-04-15configure: fix TPM logicPaolo Bonzini1-6/+18
A non-native i386 or x86_64 emulator should not have TPM passthrough support, since the TPM is only present for those hosts. Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-15Add linux-headers to QEMU_INCLUDESJan Kiszka1-4/+1
virtio/dataplane/vring.c requires the Linux headers and is built for all targets. So we need to add the corresponding include to QEMU_INCLUDES to avoid that outdated distribution headers are used. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-15block: ssh: Use libssh2_sftp_fsync (if supported by libssh2) to flush to disk.Richard W.M. Jones1-0/+25
libssh2_sftp_fsync is an extension to libssh2 to support fsync(2) over sftp, which is itself an extension of OpenSSH. If both libssh2 and the ssh daemon support it, this will allow bdrv_flush_to_disk to commit changes through to disk on the remote server. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-15block: Add support for Secure Shell (ssh) block device.Richard W.M. Jones1-0/+48
qemu-system-x86_64 -drive file=ssh://hostname/some/image QEMU will ssh into 'hostname' and open '/some/image' which is made available as a standard block device. You can specify a username (ssh://user@host/...) and/or a port number (ssh://host:port/...). You can also use an alternate syntax using properties (file.user, file.host, file.port, file.path). Current limitations: - Authentication must be done without passwords or passphrases, using ssh-agent. Other authentication methods are not supported. - Uses a single connection, instead of concurrent AIO with multiple SSH connections. This is implemented using libssh2 on the client side. The server just requires a regular ssh daemon with sftp-server support. Most ssh daemons on Unix/Linux systems will work out of the box. Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Cc: Stefan Hajnoczi <stefanha@gmail.com> Cc: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-12cpu-exec: Allow "-d exec" in non-debug builds (drop CONFIG_DEBUG_EXEC)Peter Maydell1-3/+0
The CONFIG_DEBUG_EXEC define compiles out a single qemu_log_mask() call, which is a pretty trivial cost even for something in the main cpu_exec() loop. Having this be conditionally defined means that '-d exec' on a non-debug build will silently do nothing. Drop the define and the configure machinery that sets it, in favour of just always allowing this log option to be enabled at runtime. As a concession to the mainloopiness, we use qemu_loglevel_mask()+qemu_log() rather than qemu_log_mask() to avoid the function call overhead. Note that DEBUG_DISAS is always defined, so removing the '|| defined(CONFIG_DEBUG_EXEC)' from those conditionals makes no behavioural change for that logging. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-08Merge remote-tracking branch 'bonzini/hw-dirs' into stagingAnthony Liguori1-1/+1
# By Paolo Bonzini # Via Paolo Bonzini * bonzini/hw-dirs: (35 commits) hw: move private headers to hw/ subdirectories. MAINTAINERS: update for source code movement hw: move last file to hw/arm/ hw: move hw/kvm/ to hw/i386/kvm hw: move ARM CPU cores to hw/cpu/, configure with default-configs/ hw: move other devices to hw/misc/, configure with default-configs/ hw: move NVRAM interfaces to hw/nvram/, configure with default-configs/ hw: move GPIO interfaces to hw/gpio/, configure with default-configs/ hw: move interrupt controllers to hw/intc/, configure with default-configs/ hw: move DMA controllers to hw/dma/, configure with default-configs/ hw: move VFIO and ivshmem to hw/misc/ hw: move PCI bridges to hw/pci-* or hw/ARCH hw: move SD/MMC devices to hw/sd/, configure with default-configs/ hw: move timer devices to hw/timer/, configure with default-configs/ hw: move ISA bridges and devices to hw/isa/, configure with default-configs/ hw: move char devices to hw/char/, configure via default-configs/ hw: move more files to hw/xen/ hw: move SCSI controllers to hw/scsi/, configure via default-configs/ hw: move SSI controllers to hw/ssi/, configure via default-configs/ hw: move I2C controllers to hw/i2c/, configure via default-configs/ ... Message-id: 1365442249-18259-1-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-08hw: move virtio devices to hw/ subdirectoriesPaolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08configure: Don't fall back to gthread coroutine backendPeter Maydell1-23/+46
The gthread coroutine backend is broken and does not produce a working QEMU; it is only useful for some very limited debugging situations. Clean up the backend selection logic in configure so that it now runs "if on windows use windows; else prefer ucontext; else sigaltstack". To do this we refactor the configure code to separate out "test whether we have a working ucontext", "pick a default if user didn't specify" and "validate that user didn't specify something invalid", rather than having all three of these run together. We also simplify the Makefile logic so it just links in the backend the configure script selects. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1365419487-19867-3-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-08configure: Provide and use convenience error reporting functionPeter Maydell1-118/+75
Provide a convenience function for reporting an error and exiting, and update various places in the configure script to use it. This allows us to be a little more consistent about how format our error messages and makes the calling code shorter. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1365419487-19867-2-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-02configure: remove unset variablesPaolo Bonzini1-2/+0
These variables have not been set for a long time. Do not include them in config-host.mak. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1364918276-11866-1-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-01Merge remote-tracking branch 'stefanha/trivial-patches' into stagingAnthony Liguori1-0/+2
# By Dunrong Huang (1) and others # Via Stefan Hajnoczi * stefanha/trivial-patches: hw/tcx: Remove unused 'addr' field and the property that sets it hw/i386/pc: format load_linux function configure: show debug-info option in --help output
2013-03-30w32: Fix build with older gcc (unresolved symbol)Stefan Weil1-0/+5
The cross i586-mingw32msvc-gcc 4.4.4 from Debian Squeeze does not support __sync_val_compare_and_swap by default. Using -march=i686 fixes that and should also result in better code. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-03-28configure: show debug-info option in --help outputDunrong Huang1-0/+2
"--enable-debug-info" and "--disable-debug-info" were not shown in --help output. Signed-off-by: Dunrong Huang <huangdr@cloud-times.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-23Add top level changes for moxieAnthony Green1-1/+8
Signed-off-by: Anthony Green <green@moxielogic.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-03-23Merge branch 'for-upstream' of git://github.com/mwalle/qemuBlue Swirl1-17/+17
* 'for-upstream' of git://github.com/mwalle/qemu: configure: rename OpenGL feature to GLX configure: proper OpenGL/GLX probe target-lm32: use HELPER() macro target-lm32: flush tlb after clearing env target-lm32: remove dead code target-lm32: fix cmpgui and cmpgeui opcodes tests: tcg: lm32: add more test cases target-lm32: don't log cpu state in translation lm32_uart: fix receive buffering milkymist-uart: fix receive buffering lm32-dis: fix NULL pointer dereference target-lm32: fix debug memory access
generated by cgit v1.1 at 2024-12-23 02:01:12 +0000