aboutsummaryrefslogtreecommitdiff
path: root/configure
AgeCommit message (Collapse)AuthorFilesLines
2011-03-07Add lm32 target to configureMichael Walle1-3/+7
Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-03-06w32: Add support for cursesStefan Weil1-1/+5
MinGW optionally includes pdcurses, so add support for it. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-02-23microblaze: Allow targeting little-endian mbEdgar E. Iglesias1-2/+5
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
2011-02-20w32: Use additional library libiberty.aStefan Weil1-1/+1
libiberty.a is part of MinGW and provides useful functions like ffs (MinGW) and getopt (MinGW-w64). It is needed for w64 compilations and allows simpler code for w32. Cc: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-20target-i386: set target_phys_bits to 64Aurelien Jarno1-1/+1
qemu i386 used to support more than 4GB of RAM through PAE, but it has been disabled for an unknown reason. Reenable it. Note that simply running qemu x86_64 and emulating a 32-bit CPU is not a solution to this problem as it is about 15% slower (it needs to emulate 64 bit registers even if half of them are not used). On the other hand, I haven't seen any measurable impact by switching target_phys_bits to 64. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-02-17linux-user: Define target alignment sizeLaurent Vivier1-0/+17
Datatype alignment can be found using following application: int main(void) { printf("alignof(short) %ld\n", __alignof__(short)); printf("alignof(int) %ld\n", __alignof__(int)); printf("alignof(long) %ld\n", __alignof__(long)); printf("alignof(long long) %ld\n", __alignof__(long long)); } This patch includes following alignments: i386 alignof(short) 2 alignof(int) 4 alignof(long) 4 alignof(long long) 8 x86_64 alignof(short) 2 alignof(int) 4 alignof(long) 8 alignof(long long) 8 arm alignof(short) 2 alignof(int) 4 alignof(long) 4 alignof(long long) 4 m68k (680x0) alignof(short) 2 alignof(int) 2 alignof(long) 2 alignof(long long) 2 mips alignof(short) 2 alignof(int) 4 alignof(long) 4 alignof(long long) 8 ppc alignof(short) 2 alignof(int) 4 alignof(long) 4 alignof(long long) 8 for other targets, use by default (2,4,4,8). Please, update for your favorite target... Signed-off-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
2011-02-17linux-user: Support the epoll syscallsPeter Maydell1-0/+54
Support the epoll family of syscalls: epoll_create(), epoll_create1(), epoll_ctl(), epoll_wait() and epoll_pwait(). Note that epoll_create1() and epoll_pwait() are later additions, so we have to test separately in configure for their presence. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
2011-02-14kvm: Fix race between timer signals and vcpu entry under !IOTHREADJan Kiszka1-0/+6
Found by Stefan Hajnoczi: There is a race in kvm_cpu_exec between checking for exit_request on vcpu entry and timer signals arriving before KVM starts to catch them. Plug it by blocking both timer related signals also on !CONFIG_IOTHREAD and process those via signalfd. As this fix depends on real signalfd support (otherwise the timer signals only kick the compat helper thread, and the main thread hangs), we need to detect the invalid constellation and abort configure. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> CC: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-02-01Merge remote branch 'qemu-kvm/uq/master' into stagingAnthony Liguori1-10/+26
aliguori: fix build with !defined(KVM_CAP_ASYNC_PF) Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-02-01Merge remote branch 'spice/spice.v29.pull' into stagingAnthony Liguori1-3/+3
Conflicts: trace-events
2011-01-29New trace-event backend: stderrFabien Chouteau1-1/+2
This backend sends trace events to standard error output during the emulation. Also add a "--list-backends" option to tracetool, so configure script can display the list of available backends. Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Acked-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-24configure: Fix spice probeJiri Denemark1-3/+3
Non-existent $pkgconfig instead of $pkg_config was used when configure probes for spice availability. Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2011-01-23kvm: Consolidate must-have capability checksJan Kiszka1-13/+26
Instead of splattering the code with #ifdefs and runtime checks for capabilities we cannot work without anyway, provide central test infrastructure for verifying their availability both at build and runtime. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-21kvm: Enable user space NMI injection for kvm guestLai Jiangshan1-0/+3
Make use of the new KVM_NMI IOCTL to send NMIs into the KVM guest if the user space raised them. (example: qemu monitor's "nmi" command) Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-20Add scripts directoryBlue Swirl1-1/+1
Move build and user scripts into scripts directory. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-14target-sh4: switch sh4 to softfloatAurelien Jarno1-3/+3
We need to be able to catch exceptions correctly and thus enable softfloat on SH4. As all machines except i386 and x86_64 are using softfloat, make it the default and change the case to detect i386 and x86_64. Note that CRIS doesn't have an FPU, so it can be configured with both softfloat-native and softfloat. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-14configure: fix broken testAurelien Jarno1-1/+1
Since commit d1807a4f836c27f6dc7061e53a834dd27f78e46a ./configure tries to test files and directories with "test -f", which only test for regular files. Test with "test -e", which looks for any kind of files. This unbreak the configure script when not using a separate object directory. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-14make trace options use autoconfy namesPaolo Bonzini1-4/+4
These are not in any release, so I am just renaming them. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-14move --srcdir detection earlierPaolo Bonzini1-5/+7
This will help getting config.guess and config.sub from the srcdir. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-14 [PATCH v3 14/15] remove HOST_CC mention from roms/{sea, vga}bios/config.makPaolo Bonzini1-1/+0
Not used in the submodules. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-14remove source_path_usedPaolo Bonzini1-29/+16
Not necessary since we use mkdir -p and from this patch test -f. Also, dirname returns "." if a path has no directory component, as is the case for "sh configure". Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-14move "ln -sf" emulation to a functionPaolo Bonzini1-15/+11
"ln -sf" does not really do anything more than "ln -s" on Solaris. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-14reorganize sdl-config testsPaolo Bonzini1-13/+13
This also allows overriding it with SDL_CONFIG, and warning in suspicious cross-compilation scenarios. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-14do not default to non-prefixed pkg-config when cross compilingPaolo Bonzini1-2/+2
This can still be requested with PKG_CONFIG=/path/to/pkg-config. Just do not use it as a default, and print a warning. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-14fix spelling of $pkg_config, move default together with other cross toolsPaolo Bonzini1-17/+17
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-14provide portable HOST_LONG_BITS testPaolo Bonzini1-7/+9
Do not hardcode the list of 64-bit CPUs. Use sizeof(void *) to compute it. Renaming it to HOST_LONG_BITS to HOST_POINTER_BITS is left for later. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-14do not pass bogus $(SRC_PATH) include paths to cc during configurePaolo Bonzini1-8/+11
Non-existent -I paths are dropped silently by the compiler, but still it is not polite to pass bogus options. Configure-time tests do not need any include files from the source path, so only include -I flags at make time (when they're properly expanded). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-14test cc with the complete set of chosen flagsPaolo Bonzini1-25/+25
The "test the C compiler works ok" comes before a bunch of flags are added for --cpu or just depending on the host. It helps debugging if the test is done after these flags are (unconditionally) added. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-14fix sparse support (?)Paolo Bonzini1-5/+5
I didn't test with sparse, but the old code using += before a variable was set was wrong. Sparse support should probably be ripped out or redone, but this at least keeps some sanity. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-14move feature variables to the topPaolo Bonzini1-82/+82
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-14default make and install to environment variablesPaolo Bonzini1-9/+10
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-14default compilation tools to environment variablesPaolo Bonzini1-13/+7
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-12linux-user: Add configure check for linux/fiemap.h and IOC_FS_FIEMAPPeter Maydell1-0/+20
Add a configure check for the existence of linux/fiemap.h and the IOC_FS_FIEMAP ioctl. This fixes a compilation failure on Linux systems which don't have that header file. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-07linux-user: Implement sync_file_range{,2} syscallsPeter Maydell1-0/+18
Implement the missing syscalls sync_file_range and sync_file_range2. The latter in particular is used by newer versions of apt on Ubuntu for ARM. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
2010-12-17raw-posix: add discard supportChristoph Hellwig1-0/+26
Add support to discard blocks in a raw image residing on an XFS filesystem by calling the XFS_IOC_UNRESVSP64 ioctl to punch holes. Support for other hole punching mechanisms can be added when they become available. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-14ceph/rbd block driver for qemu-kvmChristian Brunner1-0/+52
RBD is an block driver for the distributed file system Ceph (http://ceph.newdream.net/). This driver uses librados (which is part of the Ceph server) for direct access to the Ceph object store and is running entirely in userspace (Yehuda also wrote a driver for the linux kernel, that can be used to access rbd volumes as a block device). Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Christian Brunner <chb@muc.de> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-11-21Add support for generating a systemtap tapset static probesDaniel P. Berrange1-0/+7
This introduces generation of a qemu.stp/qemu-system-XXX.stp files which provides tapsets with friendly names for static probes & their arguments. Instead of probe process("qemu").mark("qemu_malloc") { printf("Malloc %d %p\n", $arg1, $arg2); } It is now possible todo probe qemu.system.i386.qemu_malloc { printf("Malloc %d %p\n", size, ptr); } There is one tapset defined per target arch, for both user and system emulators. * Makefile.target: Generate stp files for each target * tracetool: Support for generating systemtap tapsets * configure: Check for whether systemtap is available with the DTrace backend Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-21Add a DTrace tracing backend targetted for SystemTAP compatabilityDaniel P. Berrange1-1/+13
This introduces a new tracing backend that targets the SystemTAP implementation of DTrace userspace tracing. The core functionality should be applicable and standard across any DTrace implementation on Solaris, OS-X, *BSD, but the Makefile rules will likely need some small additional changes to cope with OS specific build requirements. This backend builds a little differently from the other tracing backends. Specifically there is no 'trace.c' file, because the 'dtrace' command line tool generates a '.o' file directly from the dtrace probe definition file. The probe definition is usually named with a '.d' extension but QEMU uses '.d' files for its external makefile dependancy tracking, so this uses '.dtrace' as the extension for the probe definition file. The 'tracetool' program gains the ability to generate a trace.h file for DTrace, and also to generate the trace.d file containing the dtrace probe definition. Example usage of a dtrace probe in systemtap looks like: probe process("qemu").mark("qemu_malloc") { printf("Malloc %d %p\n", $arg1, $arg2); } * .gitignore: Ignore trace-dtrace.* * Makefile: Extra rules for generating DTrace files * Makefile.obj: Don't build trace.o for DTrace, use trace-dtrace.o generated by 'dtrace' instead * tracetool: Support for generating DTrace data files Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-21Revert "Add a DTrace tracing backend targetted for SystemTAP compatability"Anthony Liguori1-13/+1
This reverts commit 4addb1127f6327c7ebcbd150a6b589e7677adc92.
2010-11-21Revert "Add support for generating a systemtap tapset static probes"Anthony Liguori1-7/+0
This reverts commit 2834c3e0140c3b0ed4422909dfa0607b7213d95d. Conflicts: Makefile.target
2010-11-16Add support for generating a systemtap tapset static probesDaniel P. Berrange1-0/+7
This introduces generation of a qemu.stp/qemu-system-XXX.stp files which provides tapsets with friendly names for static probes & their arguments. Instead of probe process("qemu").mark("qemu_malloc") { printf("Malloc %d %p\n", $arg1, $arg2); } It is now possible todo probe qemu.system.i386.qemu_malloc { printf("Malloc %d %p\n", size, ptr); } There is one tapset defined per target arch. * Makefile: Generate a qemu.stp file for systemtap * tracetool: Support for generating systemtap tapsets Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-16Add a DTrace tracing backend targetted for SystemTAP compatabilityDaniel P. Berrange1-1/+13
This introduces a new tracing backend that targets the SystemTAP implementation of DTrace userspace tracing. The core functionality should be applicable and standard across any DTrace implementation on Solaris, OS-X, *BSD, but the Makefile rules will likely need some small additional changes to cope with OS specific build requirements. This backend builds a little differently from the other tracing backends. Specifically there is no 'trace.c' file, because the 'dtrace' command line tool generates a '.o' file directly from the dtrace probe definition file. The probe definition is usually named with a '.d' extension but QEMU uses '.d' files for its external makefile dependancy tracking, so this uses '.dtrace' as the extension for the probe definition file. The 'tracetool' program gains the ability to generate a trace.h file for DTrace, and also to generate the trace.d file containing the dtrace probe definition. Example usage of a dtrace probe in systemtap looks like: probe process("qemu").mark("qemu_malloc") { printf("Malloc %d %p\n", $arg1, $arg2); } * .gitignore: Ignore trace-dtrace.* * Makefile: Extra rules for generating DTrace files * Makefile.obj: Don't build trace.o for DTrace, use trace-dtrace.o generated by 'dtrace' instead * tracetool: Support for generating DTrace data files Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-01Add Intel HD Audio support to qemu.Gerd Hoffmann1-2/+2
This patch adds three devices to qemu: intel-hda Intel HD Audio Controller, the PCI device. Provides a HDA bus. Emulates ICH6 at the moment. Adding a ICH9 PCIE variant shouldn't be hard. hda-duplex HDA Codec. Attaches to the HDA bus. Supports 16bit stereo, rates 16k -> 96k, playback, recording and volume control (with CONFIG_MIXEMU=y). hda-output HDA Codec without recording support. Subset of the hda-duplex codec. Use this if you don't want your guests access your mic. Usage: add '-device intel-hda -device hda-duplex' to your command line. Tested guests: * Linux works. * Win7 works. * DOS (mpxplay) works. * WinXP doesn't work. [ v2 changes ] * Fixed endianess, big endian hosts work now. * Fixed some emulation bugs. * Added immediate command emulation. * Added vmstate support. * Make it behave like all other sound card drivers: - can be configured via '--audio-card-list=hda' - can be added to a VM using '-soundhw hda' * Code style fixups. * Zapped guest-triggerable asserts. * Handle partial reads/writes of audio data correctly. Cc: malc <av1474@comtv.ru> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: malc <av1474@comtv.ru>
2010-10-23rewrite i386 tests MakefilePaolo Bonzini1-0/+4
1) compute path to i386 compiler from configure. If it is found, run the i386 tests. I use macros so that this approach could be applied for other arches as well. 2) provide an easily extensible way to add tests Most tests fail, but at least "make test" does something meaningful. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-23unbreak "make" from tests directoryPaolo Bonzini1-0/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-20signalfd compatibilityMarcelo Tosatti1-0/+18
Port qemu-kvm's signalfd compat code. commit 5a7fdd0abd7cd24dac205317a4195446ab8748b5 Author: Anthony Liguori <aliguori@us.ibm.com> Date: Wed May 7 11:55:47 2008 -0500 Use signalfd() in io-thread This patch reworks the IO thread to use signalfd() instead of sigtimedwait() This will eliminate the need to use SIGIO everywhere. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-20configure: Support disabling warnings in $gcc_flagsMarkus Armbruster1-1/+1
-Wall enables a bunch of warnings at once. configure puts it after $gcc_flags. This makes it impossible to disable warnings enabled by -Wall there. Fix by putting configured flags last. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-13ppc: remove video.xBlue Swirl1-1/+1
Only Mac-on-Linux stuff used video.x, OpenBIOS does not need it. Remove video.x MoL hacks. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-09configure: Send error message from spice check to /dev/nullStefan Weil1-1/+1
pkg-config is not always available (e.g. on win32 hosts), but we don't want to see the 'command not found' error message. Redirect stdout and stderr to /dev/null. v2: * Removed changes which should not have been here. Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-09configure: Remove unneeded defines from checksStefan Weil1-4/+0
_GNU_SOURCE is already defined in QEMU_CFLAGS which is passed to gcc in shell function compile_prog. Removing the definition from several checks avoids compiler warnings (which are now written to config.log). Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.1 at 2024-12-23 20:43:51 +0000