aboutsummaryrefslogtreecommitdiff
path: root/chardev/spice.c
AgeCommit message (Collapse)AuthorFilesLines
2020-10-21spice: move add_interface() to QemuSpiceOps.Gerd Hoffmann1-1/+1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20201019075224.14803-6-kraxel@redhat.com
2020-10-15chardev/spice: simplify chardev setupGerd Hoffmann1-23/+6
Initialize spice before chardevs. That allows to register the spice chardevs directly in the init function and removes the need to maintain a linked list of chardevs just for registration. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20201014121120.13482-5-kraxel@redhat.com
2020-10-15chardev/spice: make qemu_chr_open_spice_port staticGerd Hoffmann1-4/+4
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20201014121120.13482-4-kraxel@redhat.com
2020-02-22qemu/queue.h: add QLIST_SAFE_REMOVE()Stefan Hajnoczi1-3/+1
QLIST_REMOVE() assumes the element is in a list. It also leaves the element's linked list pointers dangling. Introduce a safe version of QLIST_REMOVE() and convert open-coded instances of this pattern. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Message-id: 20200214171712.541358-4-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster1-0/+1
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-02-21char: register spice ports after spice startedMarc-André Lureau1-0/+5
Spice port registration is delayed until the server is started. But ports created after are not being registered. If the server is already started, do vmc_register_interface() to register it from qemu_chr_open_spice_port(). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Tested-by: Victor Toso <victortoso@redhat.com> Message-id: 20190221110703.5775-8-marcandre.lureau@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-21char: move SpiceChardev and open_spice_port() to spice.h headerMarc-André Lureau1-23/+5
This will allow easier subclassing of SpiceChardev, in upcoming "display: add -display spice-app launching external application" patch. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Tested-by: Victor Toso <victortoso@redhat.com> Message-id: 20190221110703.5775-7-marcandre.lureau@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-21char/spice: discard write() if backend is disconnectedMarc-André Lureau1-0/+12
Most chardev backend handle write() as discarded data if underlying system is disconnected. For unknown historical reasons, the Spice backend has "reliable" write: it will wait until the client end is reconnected to do further successful write(). To decide whether it make sense to wait until the client is reconnected (or queue the writes), let's review Spice chardev usage and handling of a disconnected client: * spice vdagent The agents reopen the virtio port on disconnect. In qemu side, virtio_serial_close() will also discard pending data. * usb redirection A disconnect creates a device disconnection. * smartcard emulation Data is discarded in passthru_apdu_from_guest(). (Spice doesn't explicitly open the smartcard char device until upcoming 0.14.2, commit 69a5cfc74131ec0459f2eb5a231139f5a69a8037) * spice webdavd The daemon will restart the service, and reopen the virtio port. * spice ports (serial console, qemu monitor..) Depends on the associated device or usage. - serial, may be throttled or discarded on write, depending on device - QMP/HMP monitor have some CLOSED event handling, but want to flush the write, which will finish when a new client connects. On disconnect/reconnect, the client starts with fresh sessions. If it is a seamless migration, the client disconnects after the source migrated. The handling of source disconnect in qemu is thus irrelevant for the Spice session migration. For all these use cases, it is better to discard writes when the client is disconnected, and require the vm-side device/agent to behave correctly on CHR_EVENT_CLOSED, to stop reading and writing from the spice chardev. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Tested-by: Victor Toso <victortoso@redhat.com> Message-id: 20190221110703.5775-3-marcandre.lureau@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-21char/spice: trigger HUP eventMarc-André Lureau1-1/+14
Inform the front-end of disconnected state (spice client disconnected). This will wakeup the source handler immediately, so it can detect the disconnection asap. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Tested-by: Victor Toso <victortoso@redhat.com> Message-id: 20190221110703.5775-2-marcandre.lureau@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-01-10configure: bump spice-server required version to 0.12.5Marc-André Lureau1-10/+0
Looking at chardev/spice.c code, I realize compilation was broken for a while with spice-server < 0.12.3. Let's bump required version to 0.12.5, released May 19 2014, instead of adding more #ifdef. (this patch combines changes from an early version and some of Frediano "[PATCH 2/2] spice: Bump required spice-server version to 0.12.6") According to repology, all the distros that are build target platforms for QEMU include it: RHEL-7: 0.14.0 Debian (Stretch): 0.12.8 Debian (Jessie): 0.12.5 FreeBSD (ports): 0.14.0 OpenSUSE Leap 15: 0.14.0 Ubuntu (Xenial): 0.12.6 Note that a previous version of this patch was bumping version to 0.12.6. Unfortunately, Debian Jessie (oldstable) is stuck with spice server 0.12.5, and QEMU should keep building until after 2y of current stable (Stretch), which will be around June 17th 2019. Qemu 4.1 should thus be free of bumping to spice-server 0.12.6 during 4.1 development cycle. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20181128155932.16171-1-marcandre.lureau@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-02-09Move include qemu/option.h from qemu-common.h to actual usersMarkus Armbruster1-0/+1
qemu-common.h includes qemu/option.h, but most places that include the former don't actually need the latter. Drop the include, and add it to the places that actually need it. While there, drop superfluous includes of both headers, and separate #include from file comment with a blank line. This cleanup makes the number of objects depending on qemu/option.h drop from 4545 (out of 4743) to 284 in my "build everything" tree. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-20-armbru@redhat.com> [Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
2018-02-09Include qapi/error.h exactly where neededMarkus Armbruster1-0/+1
This cleanup makes the number of objects depending on qapi/error.h drop from 1910 (out of 4743) to 1612 in my "build everything" tree. While there, separate #include from file comment with a blank line, and drop a useless comment on why qemu/osdep.h is included first. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-5-armbru@redhat.com> [Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
2017-06-02char: move char devices to chardev/Marc-André Lureau1-0/+421
Suggested by Paolo Bonzini during series review. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
generated by cgit v1.1 at 2024-12-29 17:53:31 +0000