aboutsummaryrefslogtreecommitdiff
path: root/blockjob.c
AgeCommit message (Collapse)AuthorFilesLines
2016-11-14blockjob: add block_job_startJohn Snow1-12/+42
Instead of automatically starting jobs at creation time via backup_start et al, we'd like to return a job object pointer that can be started manually at later point in time. For now, add the block_job_start mechanism and start the jobs automatically as we have been doing, with conversions job-by-job coming in later patches. Of note: cancellation of unstarted jobs will perform all the normal cleanup as if the job had started, particularly abort and clean. The only difference is that we will not emit any events, because the job never actually started. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1478587839-9834-5-git-send-email-jsnow@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-11-14blockjob: add .clean propertyJohn Snow1-0/+3
Cleaning up after we have deferred to the main thread but before the transaction has converged can be dangerous and result in deadlocks if the job cleanup invokes any BH polling loops. A job may attempt to begin cleaning up, but may induce another job to enter its cleanup routine. The second job, part of our same transaction, will block waiting for the first job to finish, so neither job may now make progress. To rectify this, allow jobs to register a cleanup operation that will always run regardless of if the job was in a transaction or not, and if the transaction job group completed successfully or not. Move sensitive cleanup to this callback instead which is guaranteed to be run only after the transaction has converged, which removes sensitive timing constraints from said cleanup. Furthermore, in future patches these cleanup operations will be performed regardless of whether or not we actually started the job. Therefore, cleanup callbacks should essentially confine themselves to undoing create operations, e.g. setup actions taken in what is now backup_start. Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1478587839-9834-3-git-send-email-jsnow@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-11-14blockjob: fix dead pointer in txn listVladimir Sementsov-Ogievskiy1-0/+1
Though it is not intended to be reached through normal circumstances, if we do not gracefully deconstruct the transaction QLIST, we may wind up with stale pointers in the list. The rest of this series attempts to address the underlying issues, but this should fix list inconsistencies. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Tested-by: John Snow <jsnow@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1478587839-9834-2-git-send-email-jsnow@redhat.com [Rewrote commit message. --js] Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-11-01blockjobs: split interface into public/private, Part 1John Snow1-1/+1
To make it a little more obvious which functions are intended to be public interface and which are intended to be for use only by jobs themselves, split the interface into "public" and "private" files. Convert blockjobs (e.g. block/backup) to using the private interface. Leave blockdev and others on the public interface. There are remaining uses of private state by qemu-img, and several cases in blockdev.c and block/io.c where we grab job->blk for the purposes of acquiring an AIOContext. These will be corrected in future patches. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-id: 1477584421-1399-7-git-send-email-jsnow@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-11-01Blockjobs: Internalize user_pause logicJohn Snow1-2/+20
BlockJobs will begin hiding their state in preparation for some refactorings anyway, so let's internalize the user_pause mechanism instead of leaving it to callers to correctly manage. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-id: 1477584421-1399-6-git-send-email-jsnow@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-11-01blockjob: centralize QMP event emissionsJohn Snow1-4/+19
There's no reason to leave this to blockdev; we can do it in blockjobs directly and get rid of an extra callback for most users. All non-internal events, even those created outside of QMP, will consistently emit events. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-id: 1477584421-1399-5-git-send-email-jsnow@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-11-01blockjobs: Allow creating internal jobsJohn Snow1-9/+16
Add the ability to create jobs without an ID. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-id: 1477584421-1399-3-git-send-email-jsnow@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-11-01blockjobs: hide internal jobs from management APIJohn Snow1-7/+34
If jobs are not created directly by the user, do not allow them to be seen by the user/management utility. At the moment, 'internal' jobs are those that do not have an ID. As of this patch it is impossible to create such jobs. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1477584421-1399-2-git-send-email-jsnow@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-10-31block: Add block_job_add_bdrv()Alberto Garcia1-2/+15
When a block job is created on a certain BlockDriverState, operations are blocked there while the job exists. However, some block jobs may involve additional BDSs, which must be blocked separately when the job is created and unblocked manually afterwards. This patch adds block_job_add_bdrv(), that simplifies this process by keeping a list of BDSs that are involved in the specified block job. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-10-28blockjob: introduce .drain callback for jobsPaolo Bonzini1-17/+20
This is required to decouple block jobs from running in an AioContext. With multiqueue block devices, a BlockDriverState does not really belong to a single AioContext. The solution is to first wait until all I/O operations are complete; then loop in the main thread for the block job to complete entirely. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-Id: <1477565348-5458-3-git-send-email-pbonzini@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2016-10-07block: use aio_bh_schedule_oneshotPaolo Bonzini1-5/+2
This simplifies bottom half handlers by removing calls to qemu_bh_delete and thus removing the need to stash the bottom half pointer in the opaque datum. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-05block jobs: Improve error message for missing job IDKevin Wolf1-0/+4
If a block job is started with a node name rather than a device name and no explicit job ID is passed, it was reported that '' isn't a well-formed ID. Which is correct, but we can make the message a little bit nicer. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-13block/qdev: Allow configuring rerror/werror with qdev propertiesKevin Wolf1-0/+1
The rerror/werror policies are implemented in the devices, so that's where they should be configured. In comparison to the old options in -drive, the qdev properties are only added to those devices that actually support them. If the option isn't given (or "auto" is specified), the setting of the BlockBackend is used for compatibility with the old options. For block jobs, "auto" is the same as "enospc". Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-07-13coroutine: move entry argument to qemu_coroutine_createPaolo Bonzini1-1/+1
In practice the entry argument is always known at creation time, and it is confusing that sometimes qemu_coroutine_enter is used with a non-NULL argument to re-enter a coroutine (this happens in block/sheepdog.c and tests/test-coroutine.c). So pass the opaque value at creation time, for consistency with e.g. aio_bh_new. Mostly done with the following semantic patch: @ entry1 @ expression entry, arg, co; @@ - co = qemu_coroutine_create(entry); + co = qemu_coroutine_create(entry, arg); ... - qemu_coroutine_enter(co, arg); + qemu_coroutine_enter(co); @ entry2 @ expression entry, arg; identifier co; @@ - Coroutine *co = qemu_coroutine_create(entry); + Coroutine *co = qemu_coroutine_create(entry, arg); ... - qemu_coroutine_enter(co, arg); + qemu_coroutine_enter(co); @ entry3 @ expression entry, arg; @@ - qemu_coroutine_enter(qemu_coroutine_create(entry), arg); + qemu_coroutine_enter(qemu_coroutine_create(entry, arg)); @ reentry @ expression co; @@ - qemu_coroutine_enter(co, NULL); + qemu_coroutine_enter(co); except for the aforementioned few places where the semantic patch stumbled (as expected) and for test_co_queue, which would otherwise produce an uninitialized variable warning. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-13qemu-img: Set the ID of the block job in img_commit()Alberto Garcia1-6/+0
img_commit() creates a block job without an ID. This is no longer allowed now that we require it to be unique and well-formed. We were solving this by having a fallback in block_job_create(), but now that we extended the API of commit_active_start() we can finally set an explicit ID and revert that change. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-13blockjob: Add 'job_id' parameter to block_job_create()Alberto Garcia1-4/+25
When a new job is created, the job ID is taken from the device name of the BDS. This patch adds a new 'job_id' parameter to let the caller provide one instead. This patch also verifies that the ID is always unique and well-formed. This causes problems in a couple of places where no ID is being set, because the BDS does not have a device name. In the case of test_block_job_start() (from test-blockjob-txn.c) we can simply use this new 'job_id' parameter to set the missing ID. In the case of img_commit() (from qemu-img.c) we still don't have the API to make commit_active_start() set the job ID, so we solve it by setting a default value. We'll get rid of this as soon as we extend the API. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-13blockjob: Add block_job_get()Alberto Garcia1-0/+13
Currently the way to look for a specific block job is to iterate the list manually using block_job_next(). Since we want to be able to identify a job primarily by its ID it makes sense to have a function that does just that. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-13blockjob: Update description of the 'id' fieldAlberto Garcia1-1/+2
The 'id' field of the BlockJob structure will be able to hold any ID, not only a device name. This patch updates the description of that field and the error messages where it is being used. Soon we'll add the ability to set an arbitrary ID when creating a block job. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-06-28blockjob: assert(cb) when create jobChanglong Xie1-0/+1
Callback for block job should always exist Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-id: 1466672241-22485-2-git-send-email-xiecl.fnst@cn.fujitsu.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-06-20blockjob: add AioContext attached callbackStefan Hajnoczi1-0/+38
Block jobs that use additional BDSes or event loop resources need a callback to get their affairs in order when the AioContext is switched. Simple block jobs don't need an attach callback, they automatically work thanks to the generic attach/detach notifiers that this patch adds. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 1466096189-6477-7-git-send-email-stefanha@redhat.com
2016-06-20blockjob: add block_job_get_aio_context()Stefan Hajnoczi1-3/+12
Add a helper function to document why block jobs sometimes run in the QEMU main loop and to avoid code duplication in a following patch. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 1466096189-6477-5-git-send-email-stefanha@redhat.com
2016-06-20blockjob: add pause pointsStefan Hajnoczi1-5/+33
Block jobs are coroutines that usually perform I/O but sometimes also sleep or yield. Currently only sleeping or yielded block jobs can be paused. This means jobs that do not sleep or yield (using block_job_yield()) are unaffected by block_job_pause(). Add block_job_pause_point() so that block jobs can mark quiescent points that are suitable for pausing. This solves the problem that it can take a block job a long time to pause if it is performing a long series of I/O operations. Transitioning to paused state involves a .pause()/.resume() callback. These callbacks are used to ensure that I/O and event loop activity has ceased while the job is at a pause point. Note that this patch introduces a stricter pause state than previously. The job->busy flag was incorrectly documented as a quiescent state without I/O pending. This is violated by any job that has I/O pending across sleep or block_job_yield(), like the mirror block job. [Add missing block_job_should_pause() check to avoid deadlock after job->driver->pause() in block_job_pause_point(). --Stefan] Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 1466096189-6477-4-git-send-email-stefanha@redhat.com
2016-06-20blockjob: rename block_job_is_paused()Stefan Hajnoczi1-3/+3
The block_job_is_paused() function name is not great because callers only use it to determine whether pausing has been requested. Rename it to highlight those semantics and remove it from the public header file as there are no external callers. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 1466096189-6477-3-git-send-email-stefanha@redhat.com
2016-06-20blockjob: move iostatus reset out of block_job_enter()Stefan Hajnoczi1-1/+1
The QMP block-job-resume command and cancellation may want to reset the job's iostatus. The next patches add a user who does not want to reset iostatus so move it up to block_job_enter() callers. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1466096189-6477-2-git-send-email-stefanha@redhat.com
2016-06-16block: Prevent sleeping jobs from resuming if they have been pausedAlberto Garcia1-2/+4
If we pause a block job and drain its BlockDriverState we want that the job remains inactive until we call block_job_resume() again. However if we pause the job while it is sleeping then it will resume when the sleep timer fires. This patch prevents that from happening by checking if the job has been paused after it comes back from sleeping. Signed-off-by: Alberto Garcia <berto@igalia.com> Suggested-by: Kevin Wolf <kwolf@redhat.com> Message-id: 3d9011151512326b890d22bdab3530244ef349d7.1464346103.git.berto@igalia.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-05-25blockjob: Remove BlockJob.bsKevin Wolf1-1/+0
There is a single remaining user in qemu-img, and another one in a test case, both of which can be trivially converted to using BlockJob.blk instead. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-05-25block: Convert block job core to BlockBackendKevin Wolf1-17/+20
This adds a new BlockBackend field to the BlockJob struct, which coexists with the BlockDriverState while converting the individual jobs. When creating a block job, a new BlockBackend is created on top of the given BlockDriverState, and it is destroyed when the BlockJob ends. The reference to the BDS is now held by the BlockBackend instead of calling bdrv_ref/unref manually. We have to be careful when we use bdrv_replace_in_backing_chain() in block jobs because this changes the BDS that job->blk points to. At the moment block jobs are too tightly coupled with their BDS, so that moving a job to another BDS isn't easily possible; therefore, we need to just manually undo this change afterwards. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-05-25block: Cancel jobs first in bdrv_close_all()Kevin Wolf1-0/+13
So far, bdrv_close_all() first removed all root BlockDriverStates of BlockBackends and monitor owned BDSes, and then assumed that the remaining BDSes must be related to jobs and cancelled these jobs. This order doesn't work that well any more when block jobs use BlockBackends internally because then they will lose their BDS before being cancelled. This patch changes bdrv_close_all() to first cancel all jobs and then remove all root BDSes from the remaining BBs. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-05-25block: keep a list of block jobsAlberto Garcia1-0/+13
The current way to obtain the list of existing block jobs is to iterate over all root nodes and check which ones own a job. Since we want to be able to support block jobs in other nodes as well, this patch keeps a list of jobs that is updated every time one is created or destroyed. Signed-off-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-05-19blockjob: Don't set iostatus of targetKevin Wolf1-5/+1
When block job errors were introduced, we assigned the iostatus of the target BDS "just in case". The field has never been accessible for the user because the target isn't listed in query-block. Before we can allow the user to have a second BlockBackend on the target, we need to clean this up. If anything, we would want to set the iostatus for the internal BB of the job (which we can always do later), but certainly not for a separate BB which the job doesn't even use. As a nice side effect, this gets us rid of another bs->blk use. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-02-09blockjob: Fix hang in block_job_finish_syncFam Zheng1-1/+5
With a mirror job running on a virtio-blk dataplane disk, sending "q" to HMP will cause a dead loop in block_job_finish_sync. This is because the aio_poll() only processes the AIO context of bs which has no more work to do, while the main loop BH that is scheduled for setting the job->completed flag is never processed. Fix this by adding a flag in BlockJob structure, to track which context to poll for the block job to make progress. Its value is set to true when block_job_coroutine_complete() is called, and is checked in block_job_finish_sync to determine which context to poll. Suggested-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1454379144-29807-1-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-02-04all: Clean up includesPeter Maydell1-1/+1
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1454089805-5470-16-git-send-email-peter.maydell@linaro.org
2016-02-02block: Remove unused struct definition BlockFinishDataFam Zheng1-8/+0
Unused since 94db6d2d3. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-11-12block: Add block job transactionsFam Zheng1-2/+133
Sometimes block jobs must execute as a transaction group. Finishing jobs wait until all other jobs are ready to complete successfully. Failure or cancellation of one job cancels the other jobs in the group. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1446765200-3054-10-git-send-email-jsnow@redhat.com [Rewrite the implementation which is now contained in block_job_completed. --Fam] Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12blockjob: Simplify block_job_finish_syncFam Zheng1-21/+7
With job->completed and job->ret to replace BlockFinishData. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1446765200-3054-9-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12blockjob: Add "completed" and "ret" in BlockJobFam Zheng1-0/+3
They are set when block_job_completed is called. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1446765200-3054-8-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12blockjob: Introduce reference count and fix reference to job->bsFam Zheng1-9/+16
Add reference count to block job, meanwhile move the ownership of the reference to job->bs from the caller (which is released in two completion callbacks) to the block job itself. It is necessary for block_job_complete_sync to work, because block job shouldn't live longer than its bs, as asserted in bdrv_delete. Now block_job_complete_sync can be simplified. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1446765200-3054-6-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-10-23block: Move I/O status and error actions into BBMax Reitz1-2/+3
These options are only relevant for the user of a whole BDS tree (like a guest device or a block job) and should thus be moved into the BlockBackend. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-10-20coroutine: move into libqemuutil.a libraryDaniel P. Berrange1-1/+1
The coroutine files are currently referenced by the block-obj-y variable. The coroutine functionality though is already used by more than just the block code. eg migration code uses coroutine yield. In the future the I/O channel code will also use the coroutine yield functionality. Since the coroutine code is nicely self-contained it can be easily built as part of the libqemuutil.a library, making it widely available. The headers are also moved into include/qemu, instead of the include/block directory, since they are now part of the util codebase, and the impl was never in the block/ directory either. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-10-16blockjob: Store device name at job creationKevin Wolf1-7/+8
Some block jobs change the block device graph on completion. This means that the device that owns the job and originally was addressed with its device name may no longer be what the corresponding BlockBackend points to. Previously, the effects of bdrv_swap() ensured that the job was (at least partially) transferred to the target image. Events that contain the device name could still use bdrv_get_device_name(job->bs) and get the same result. After removing bdrv_swap(), this won't work any more. Instead, save the device name at job creation and use that copy for QMP events and anything else identifying the job. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-07blockjob: add block_job_release functionTing Wang1-8/+12
There is job resource leak in function mirror_start_job, although bdrv_create_dirty_bitmap is unlikely failed. Add block_job_release for each release when needed. Signed-off-by: Ting Wang <kathy.wangting@huawei.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 1435311455-56048-1-git-send-email-kathy.wangting@huawei.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-22Include qapi/qmp/qerror.h exactly where neededMarkus Armbruster1-0/+1
In particular, don't include it into headers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qerror: Clean up QERR_ macros to expand into a single stringMarkus Armbruster1-4/+4
These macros expand into error class enumeration constant, comma, string. Unclean. Has been that way since commit 13f59ae. The error class is always ERROR_CLASS_GENERIC_ERROR since the previous commit. Clean up as follows: * Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and delete it from the QERR_ macro. No change after preprocessing. * Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into error_setg(...). Again, no change after preprocessing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-04-28blockjob: Allow nested pauseFam Zheng1-6/+17
This patch changes block_job_pause to increase the pause counter and block_job_resume to decrease it. The counter will allow calling block_job_pause/block_job_resume unconditionally on a job when we need to suspend the IO temporarily. From now on, each block_job_resume must be paired with a block_job_pause to keep the counter balanced. The user pause from QMP or HMP will only trigger block_job_pause once until it's resumed, this is achieved by adding a user_paused flag in BlockJob. One occurrence of block_job_resume in mirror_complete is replaced with block_job_enter which does what is necessary. In block_job_cancel, the cancel flag is good enough to instruct coroutines to quit loop, so use block_job_enter to replace the unpaired block_job_resume. Upon block job IO error, user is notified about the entering to the pause state, so this pause belongs to user pause, set the flag accordingly and expect a matching QMP resume. [Extended doc comments as suggested by Paolo Bonzini <pbonzini@redhat.com>. --Stefan] Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-id: 1428069921-2957-2-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-11-03block: declare blockjobs and dataplane friends!Stefan Hajnoczi1-0/+1
Now that blockjobs use AioContext they are safe for use with dataplane. Unblock them! Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1413889440-32577-12-git-send-email-stefanha@redhat.com
2014-11-03blockjob: add block_job_defer_to_main_loop()Stefan Hajnoczi1-0/+45
Block jobs will run in the BlockDriverState's AioContext, which may not always be the QEMU main loop. There are some block layer APIs that are either not thread-safe or risk lock ordering problems. This includes bdrv_unref(), bdrv_close(), and anything that calls bdrv_drain_all(). The block_job_defer_to_main_loop() API allows a block job to schedule a function to run in the main loop with the BlockDriverState AioContext held. This function will be used to perform cleanup and backing chain manipulations in block jobs. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1413889440-32577-6-git-send-email-stefanha@redhat.com
2014-11-03blockjob: Add "ready" fieldMax Reitz1-0/+3
When a block job signals readiness, this is currently reported only through QMP. If qemu wants to use block jobs for internal tasks, there needs to be another way to correctly detect when a block job may be completed. For this reason, introduce a bool "ready" which is set when the block job may be completed. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1414159063-25977-6-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-11-03blockjob: Introduce block_job_complete_sync()Max Reitz1-7/+32
Implement block_job_complete_sync() by doing the exact same thing as block_job_cancel_sync() does, only with calling block_job_complete() instead of block_job_cancel(). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1414159063-25977-5-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-10-20block: Rename BlockDriverCompletionFunc to BlockCompletionFuncMarkus Armbruster1-2/+2
I'll use it with block backends shortly, and the name is going to fit badly there. It's a block layer thing anyway, not just a block driver thing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20block: Eliminate BlockDriverState member device_name[]Markus Armbruster1-1/+2
device_name[] can become non-empty only in bdrv_new_root() and bdrv_move_feature_fields(). The latter is used only to undo damage done by bdrv_swap(). The former is called only by blk_new_with_bs(). Therefore, when a BlockDriverState's device_name[] is non-empty, then it's been created with a BlockBackend, and vice versa. Furthermore, blk_new_with_bs() keeps the two names equal. Therefore, device_name[] is redundant. Eliminate it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.1 at 2024-11-01 00:56:11 +0000