aboutsummaryrefslogtreecommitdiff
path: root/blockdev.c
AgeCommit message (Collapse)AuthorFilesLines
2016-11-01Blockjobs: Internalize user_pause logicJohn Snow1-7/+5
BlockJobs will begin hiding their state in preparation for some refactorings anyway, so let's internalize the user_pause mechanism instead of leaving it to callers to correctly manage. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-id: 1477584421-1399-6-git-send-email-jsnow@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-11-01blockjob: centralize QMP event emissionsJohn Snow1-34/+8
There's no reason to leave this to blockdev; we can do it in blockjobs directly and get rid of an extra callback for most users. All non-internal events, even those created outside of QMP, will consistently emit events. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-id: 1477584421-1399-5-git-send-email-jsnow@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-11-01Replication/Blockjobs: Create replication jobs as internalJohn Snow1-4/+7
Bubble up the internal interface to commit and backup jobs, then switch replication tasks over to using this methodology. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-id: 1477584421-1399-4-git-send-email-jsnow@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-11-01blockjobs: hide internal jobs from management APIJohn Snow1-4/+13
If jobs are not created directly by the user, do not allow them to be seen by the user/management utility. At the moment, 'internal' jobs are those that do not have an ID. As of this patch it is impossible to create such jobs. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1477584421-1399-2-git-send-email-jsnow@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-10-31block: Add 'base-node' parameter to the 'block-stream' commandAlberto Garcia1-0/+21
The way to specify the node from which to copy data in the block-stream operation is by using the 'base' parameter. This parameter however takes a file name, not a node name. Since we want to be able to perform this operation using only node names, this patch adds a new 'base-node' parameter. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-10-31block: Add QMP support for streaming to an intermediate layerAlberto Garcia1-6/+9
This patch makes the 'device' parameter of the 'block-stream' command accept a node name that is not a root node. The presence of this feature can't be directly tested with introspection; soon we'll introduce a 'base-node' parameter whose presence can be checked for this purpose. In addition to that, operation blockers will be checked in all intermediate nodes between the top and the base node. Signed-off-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-10-31block: Check blockers in all nodes involved in a block-commit jobAlberto Garcia1-2/+9
qmp_block_commit() checks for op blockers in the active and destination (base) images. However all nodes between top_bs and base are also involved, and they are removed from the chain afterwards. In addition to that, if top_bs is not the active layer then top_bs's overlay also needs to be checked because it's involved in the job (its backing image string needs to be updated to point to 'base'). This patch checks that none of those nodes are blocked. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-10-25qapi: rename QmpOutputVisitor to QObjectOutputVisitorDaniel P. Berrange1-1/+1
The QmpOutputVisitor has no direct dependency on QMP. It is valid to use it anywhere that one wants a QObject. Rename it to better reflect its functionality as a generic QAPI to QObject converter. The commit before previous renamed the files, this one renames C identifiers. Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1475246744-29302-6-git-send-email-berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Split into file rename and identifier rename] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-10-25qapi: rename *qmp-*-visitor* to *qobject-*-visitor*Daniel P. Berrange1-1/+1
The QMP visitors have no direct dependency on QMP. It is valid to use them anywhere that one has a QObject. Rename them to better reflect their functionality as a generic QObject to QAPI converter. This is the first of three parts: rename the files. The next two parts will rename C identifiers. The split is necessary to make git rename detection work. Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Split into file and identifier rename, two comments touched up] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-09-29block: Remove qemu_root_bds_optsKevin Wolf1-53/+1
The remaining options in qemu_root_bds_opts (aio and copy-on-read) aren't used any more, the QAPI schema doesn't contain them. Therefore all the code processing qemu_root_bds_opts options is dead and can be removed. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-09-29block: Move 'discard' option to bdrv_open_common()Kevin Wolf1-25/+0
This enables its use for nested child nodes. The compatibility between the 'discard' and 'detect-zeroes' setting is checked in bdrv_open_common() now as the former setting isn't available before calling bdrv_open() any more. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-09-29block: Use 'detect-zeroes' option for 'blockdev-change-medium'Kevin Wolf1-3/+6
Instead of modifying the new BDS after it has been opened, use the newly supported 'detect-zeroes' option in bdrv_open_common() so that all requirements are checked (detect-zeroes=unmap requires discard=unmap). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-09-29block: Parse 'detect-zeroes' in bdrv_open_common()Kevin Wolf1-8/+1
Amongst others, this means that you can now use the 'detect-zeroes' option for non-top-level nodes in blockdev-add, like the QAPI schema promises. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-09-29block: Drop aio/cache consistency check from qmp_blockdev_add()Kevin Wolf1-15/+0
The TODO comment has been addressed a while ago and this is now checked in raw-posix, so we don't have to special case this in blockdev-add any more. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-09-29block: Fix error path in qmp_blockdev_change_medium()Kevin Wolf1-1/+1
Commit 00949bab incorrectly changed one instance of &err into errp while touching the line. Change it back. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-09-23block: Remove BB interface from blockdev-add/delKevin Wolf1-90/+34
With this patch, blockdev-add always works on a node level, i.e. it creates a BDS, but no BB. Consequently, x-blockdev-del doesn't need the 'device' option any more, but 'node-name' becomes mandatory. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-09-23block: Avoid printing NULL string in error messagesKevin Wolf1-6/+3
Even for nodes that have a BlockBackend attached, bdrv_get_parent_name() can return NULL if the BB is anonymous (e.g. it belongs to a block job or a device that was created with a drive=<node-name> option). Remove the information from the error message. The user probably knows already why the node is still in use. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-09-23block: Accept device model name for block_set_io_throttleKevin Wolf1-5/+7
In order to remove the need for BlockBackend names in the external API, we want to allow qdev device names in all device related commands. This converts block_set_io_throttle to accept a qdev device name. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-23block: Accept device model name for blockdev-change-mediumKevin Wolf1-7/+11
In order to remove the need for BlockBackend names in the external API, we want to allow qdev device names in all device related commands. This converts blockdev-change-medium to accept a qdev device name. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-23block: Accept device model name for ejectKevin Wolf1-3/+7
In order to remove the need for BlockBackend names in the external API, we want to allow qdev device names in all device related commands. This converts eject to accept a qdev device name. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-23block: Accept device model name for x-blockdev-remove-mediumKevin Wolf1-12/+16
In order to remove the need for BlockBackend names in the external API, we want to allow qdev device names in all device related commands. This converts x-blockdev-remove-medium to accept a qdev device name. As the command is experimental, we can still remove the 'device' option that uses the BlockBackend name. This requires some test case changes and is left for another series. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-23block: Accept device model name for x-blockdev-insert-mediumKevin Wolf1-16/+17
In order to remove the need for BlockBackend names in the external API, we want to allow qdev device names in all device related commands. This converts x-blockdev-insert-medium to accept a qdev device name. As the command is experimental, we can still remove the 'device' option that uses the BlockBackend name. This requires some test case changes and is left for another series. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-23block: Accept device model name for blockdev-open/close-trayKevin Wolf1-15/+46
In order to remove the need for BlockBackend names in the external API, we want to allow qdev device names in all device related commands. This converts blockdev-open/close-tray to accept a qdev device name. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-23block: rename "read-only" to BDRV_OPT_READ_ONLYAlberto Garcia1-5/+5
There were a few instances left. After this patch we're using the macro in all places. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-23block: Add "read-only" to the options QDictAlberto Garcia1-9/+7
This adds the "read-only" option to the QDict. One important effect of this change is that when a child inherits options from its parent, the existing "read-only" mode can be preserved if it was explicitly set previously. This addresses scenarios like this: [E] <- [D] <- [C] <- [B] <- [A] In this case, if we reopen [D] with read-only=off, and later reopen [B], then [D] will not inherit read-only=on from its parent during the bdrv_reopen_queue_child() stage. The BDRV_O_RDWR flag is not removed yet, but its keep in sync with the value of the "read-only" option. Signed-off-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-15Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-1/+1
* minor patches here and there * MTTCG: lock-free TB lookup * SCSI: bugfixes for MPTSAS, MegaSAS, LSI53c, vmw_pvscsi * buffer_is_zero rewrite (except for one patch) * chardev: qemu_chr_fe_write checks * checkpatch improvement for markdown preformatted text * default-configs cleanups * atomics cleanups # gpg: Signature made Tue 13 Sep 2016 18:14:30 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (58 commits) cutils: Add generic prefetch cutils: Add SSE4 version cutils: Add test for buffer_is_zero cutils: Remove ppc buffer zero checking cutils: Remove aarch64 buffer zero checking cutils: Rearrange buffer_is_zero acceleration cutils: Export only buffer_is_zero cutils: Remove SPLAT macro cutils: Move buffer_is_zero and subroutines to a new file ppc: do not redefine CPUPPCState x86/lapic: Load LAPIC state at post_load optionrom: do not rely on compiler's bswap optimization checkpatch: Fix whitespace checks for documentation code blocks atomics: Use __atomic_*_n() variant primitives atomics: Remove redundant barrier()'s kvm-all: drop kvm_setup_guest_memory i8257: Make device "i8257" unavailable with -device Revert "megasas: remove useless check for cmd->frame" char: convert qemu_chr_fe_write to qemu_chr_fe_write_all hw: replace most use of qemu_chr_fe_write with qemu_chr_fe_write_all ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Conflicts: cpus.c tests/Makefile.include
2016-09-13qtail: clean up direct access to tqe_prev fieldIgor Mammedov1-1/+1
instead of accessing tqe_prev field dircetly outside of queue.h use macros to check if element is in list and make sure that afer element is removed from list tqe_prev field could be used to do the same check. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1469450832-84343-1-git-send-email-imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-13mirror: auto complete active commitWen Congyang1-1/+1
Auto complete mirror job in background to prevent from blocking synchronously Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com> Signed-off-by: Wang WeiWei <wangww.fnst@cn.fujitsu.com> Message-id: 1469602913-20979-7-git-send-email-xiecl.fnst@cn.fujitsu.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-09-05blockdev-backup: added support for data compressionPavel Butsykin1-2/+5
The idea is simple - backup is "written-once" data. It is written block by block and it is large enough. It would be nice to save storage space and compress it. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Jeff Cody <jcody@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: John Snow <jsnow@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-05drive-backup: added support for data compressionPavel Butsykin1-3/+6
The idea is simple - backup is "written-once" data. It is written block by block and it is large enough. It would be nice to save storage space and compress it. The patch adds a flag to the qmp/hmp drive-backup command which enables block compression. Compression should be implemented in the format driver to enable this feature. There are some limitations of the format driver to allow compressed writes. We can write data only once. Though for backup this is perfectly fine. These limitations are maintained by the driver and the error will be reported if we are doing something wrong. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Jeff Cody <jcody@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: John Snow <jsnow@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-05block: simplify blockdev-backupPavel Butsykin1-46/+20
Now that we can support boxed commands, use it to greatly reduce the number of parameters (and likelihood of getting out of sync) when adjusting blockdev-backup parameters. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Jeff Cody <jcody@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: John Snow <jsnow@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-05block: simplify drive-backupPavel Butsykin1-75/+36
Now that we can support boxed commands, use it to greatly reduce the number of parameters (and likelihood of getting out of sync) when adjusting drive-backup parameters. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Jeff Cody <jcody@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: John Snow <jsnow@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-05block: Accept node-name for drive-mirrorKevin Wolf1-11/+3
In order to remove the necessity to use BlockBackend names in the external API, we want to allow node-names everywhere. This converts drive-mirror to accept a node-name without lifting the restriction that we're operating at a root node. In case of an invalid device name, the command returns the GenericError error class now instead of DeviceNotFound, because this is what qmp_get_root_bs() returns. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-09-05block: Accept node-name for drive-backupKevin Wolf1-27/+9
In order to remove the necessity to use BlockBackend names in the external API, we want to allow node-names everywhere. This converts drive-backup and the corresponding transaction action to accept a node-name without lifting the restriction that we're operating at a root node. In case of an invalid device name, the command returns the GenericError error class now instead of DeviceNotFound, because this is what qmp_get_root_bs() returns. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-09-05block: Accept node-name for change-backing-fileKevin Wolf1-12/+3
In order to remove the necessity to use BlockBackend names in the external API, we want to allow node-names everywhere. This converts change-backing-file to accept a node-name without lifting the restriction that we're operating at a root node. In case of an invalid device name, the command returns the GenericError error class now instead of DeviceNotFound, because this is what qmp_get_root_bs() returns. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-09-05block: Accept node-name for blockdev-snapshot-internal-syncKevin Wolf1-12/+3
In order to remove the necessity to use BlockBackend names in the external API, we want to allow node-names everywhere. This converts blockdev-snapshot-internal-sync to accept a node-name without lifting the restriction that we're operating at a root node. In case of an invalid device name, the command returns the GenericError error class now instead of DeviceNotFound, because this is what qmp_get_root_bs() returns. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-09-05block: Accept node-name for blockdev-snapshot-delete-internal-syncKevin Wolf1-13/+3
In order to remove the necessity to use BlockBackend names in the external API, we want to allow node-names everywhere. This converts blockdev-snapshot-delete-internal-sync to accept a node-name without lifting the restriction that we're operating at a root node. In case of an invalid device name, the command returns the GenericError error class now instead of DeviceNotFound, because this is what qmp_get_root_bs() returns. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-09-05block: Accept node-name for blockdev-mirrorKevin Wolf1-9/+1
In order to remove the necessity to use BlockBackend names in the external API, we want to allow node-names everywhere. This converts blockdev-mirror to accept a node-name without lifting the restriction that we're operating at a root node. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-09-05block: Accept node-name for blockdev-backupKevin Wolf1-23/+8
In order to remove the necessity to use BlockBackend names in the external API, we want to allow node-names everywhere. This converts blockdev-backup and the corresponding transaction action to accept a node-name without lifting the restriction that we're operating at a root node. In case of an invalid device name, the command returns the GenericError error class now instead of DeviceNotFound, because this is what qmp_get_root_bs() returns. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-09-05block: Accept node-name for block-commitKevin Wolf1-12/+11
In order to remove the necessity to use BlockBackend names in the external API, we want to allow node-names everywhere. This converts block-commit to accept a node-name without lifting the restriction that we're operating at a root node. As libvirt makes use of the DeviceNotFound error class, we must add explicit code to retain this behaviour because qmp_get_root_bs() only returns GenericErrors. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com>
2016-09-05block: Accept node-name for block-streamKevin Wolf1-12/+25
In order to remove the necessity to use BlockBackend names in the external API, we want to allow node-names everywhere. This converts block-stream to accept a node-name without lifting the restriction that we're operating at a root node. In case of an invalid device name, the command returns the GenericError error class now instead of DeviceNotFound, because this is what qmp_get_root_bs() returns. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com>
2016-08-05block: Accept any target node for transactional blockdev-backupKevin Wolf1-4/+4
Commit 0d978913 changed blockdev-backup to accept arbitrary node names instead of device names (i.e. root nodes) for the backup target. However, it forgot to make the same change in transactions and to update the documentation. This patch fixes these omissions. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-19block: Simplify drive-mirrorEric Blake1-44/+34
Now that we can support boxed commands, use it to greatly reduce the number of parameters (and likelihood of getting out of sync) when adjusting drive-mirror parameters. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-Id: <1468535878-3760-1-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-19block: Simplify block_set_io_throttleEric Blake1-71/+40
Now that we can support boxed commands, use it to greatly reduce the number of parameters (and likelihood of getting out of sync) when adjusting throttle parameters. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-Id: <1468468228-27827-11-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-13blockdev: Fix regression with the default naming of throttling groupsAlberto Garcia1-2/+4
When I/O limits are set for a block device, the name of the throttling group is taken from the BlockBackend if the user doesn't specify one. Commit efaa7c4eeb7490c6f37f3 moved the naming of the BlockBackend in blockdev_init() to the end of the function, after I/O limits are set. The consequence is that the throttling group gets an empty name. Signed-off-by: Alberto Garcia <berto@igalia.com> Reported-by: Stefan Hajnoczi <stefanha@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: qemu-stable@nongnu.org Message-id: af5cd58bd2c4b9f6c57f260d9cfe586b9fb7d34d.1467986342.git.berto@igalia.com [mreitz: Use existing "id" variable instead of new "blk_id"] Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-07-13commit: Add 'job-id' parameter to 'block-commit'Alberto Garcia1-4/+5
This patch adds a new optional 'job-id' parameter to 'block-commit', allowing the user to specify the ID of the block job to be created. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-13stream: Add 'job-id' parameter to 'block-stream'Alberto Garcia1-3/+3
This patch adds a new optional 'job-id' parameter to 'block-stream', allowing the user to specify the ID of the block job to be created. The HMP 'block_stream' command remains unchanged. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-13backup: Add 'job-id' parameter to 'blockdev-backup' and 'drive-backup'Alberto Garcia1-19/+24
This patch adds a new optional 'job-id' parameter to 'blockdev-backup' and 'drive-backup', allowing the user to specify the ID of the block job to be created. The HMP 'drive_backup' command remains unchanged. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-13mirror: Add 'job-id' parameter to 'blockdev-mirror' and 'drive-mirror'Alberto Garcia1-7/+8
This patch adds a new optional 'job-id' parameter to 'blockdev-mirror' and 'drive-mirror', allowing the user to specify the ID of the block job to be created. The HMP 'drive_mirror' command remains unchanged. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-13block: Use block_job_get() in find_block_job()Alberto Garcia1-27/+13
find_block_job() looks for a block backend with a specified name, checks whether it has a block job and acquires its AioContext. We want to identify jobs by their ID and not by the block backend they're attached to, so this patch ignores the backends altogether and gets the job directly. Apart from making the code simpler, this will allow us to find block jobs once they start having user-specified IDs. To ensure backward compatibility we keep ERROR_CLASS_DEVICE_NOT_ACTIVE as the error class if the job doesn't exist. In subsequent patches we'll also need to keep the device name as the default job ID if the user doesn't specify a different one. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.1 at 2024-11-03 00:07:05 +0000