| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Qemu as server currently won't accept export names larger than 256
bytes, nor create dirty bitmap names longer than 1023 bytes, so most
uses of qemu as client or server have no reason to get anywhere near
the NBD spec maximum of a 4k limit per string.
However, we weren't actually enforcing things, ignoring when the
remote side violates the protocol on input, and also having several
code paths where we send oversize strings on output (for example,
qemu-nbd --description could easily send more than 4k). Tighten
things up as follows:
client:
- Perform bounds check on export name and dirty bitmap request prior
to handing it to server
- Validate that copied server replies are not too long (ignoring
NBD_INFO_* replies that are not copied is not too bad)
server:
- Perform bounds check on export name and description prior to
advertising it to client
- Reject client name or metadata query that is too long
- Adjust things to allow full 4k name limit rather than previous
256 byte limit
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191114024635.11363-4-eblake@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
|
|
When iothreads are in use, the failure to grab the aio context results
in an assertion failure when trying to unlock things during blk_unref,
when trying to unlock a mutex that was not locked. In short, all
calls to nbd_export_put need to done while within the correct aio
context. But since nbd_export_put can recursively reach itself via
nbd_export_close, and recursively grabbing the context would deadlock,
we can't do the context grab directly in those functions, but must do
so in their callers.
Hoist the use of the correct aio_context from nbd_export_new() to its
caller qmp_nbd_server_add(). Then tweak qmp_nbd_server_remove(),
nbd_eject_notifier(), and nbd_esport_close_all() to grab the right
context, so that all callers during qemu now own the context before
nbd_export_put() can call blk_unref().
Remaining uses in qemu-nbd don't matter (since that use case does not
support iothreads).
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190917023917.32226-1-eblake@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
|
|
When creating a read-only image, we are still advertising support for
TRIM and WRITE_ZEROES to the client, even though the client should not
be issuing those commands. But seeing this requires looking across
multiple functions:
All callers to nbd_export_new() passed a single flag based solely on
whether the export allows writes. Later, we then pass a constant set
of flags to nbd_negotiate_options() (namely, the set of flags which we
always support, at least for writable images), which is then further
dynamically modified with NBD_FLAG_SEND_DF based on client requests
for structured options. Finally, when processing NBD_OPT_EXPORT_NAME
or NBD_OPT_EXPORT_GO we bitwise-or the original caller's flag with the
runtime set of flags we've built up over several functions.
Let's refactor things to instead compute a baseline of flags as soon
as possible which gets shared between multiple clients, in
nbd_export_new(), and changing the signature for the callers to pass
in a simpler bool rather than having to figure out flags. We can then
get rid of the 'myflags' parameter to various functions, and instead
refer to client for everything we need (we still have to perform a
bitwise-OR for NBD_FLAG_SEND_DF during NBD_OPT_EXPORT_NAME and
NBD_OPT_EXPORT_GO, but it's easier to see what is being computed).
This lets us quit advertising senseless flags for read-only images, as
well as making the next patch for exposing FAST_ZERO support easier to
write.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190823143726.27062-2-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[eblake: improve commit message, update iotest 223]
|
|
The NBD specification defines NBD_FLAG_CAN_MULTI_CONN, which can be
advertised when the server promises cache consistency between
simultaneous clients (basically, rules that determine what FUA and
flush from one client are able to guarantee for reads from another
client). When we don't permit simultaneous clients (such as qemu-nbd
without -e), the bit makes no sense; and for writable images, we
probably have a lot more work before we can declare that actions from
one client are cache-consistent with actions from another. But for
read-only images, where flush isn't changing any data, we might as
well advertise multi-conn support. What's more, advertisement of the
bit makes it easier for clients to determine if 'qemu-nbd -e' was in
use, where a second connection will succeed rather than hang until the
first client goes away.
This patch affects qemu as server in advertising the bit. We may want
to consider patches to qemu as client to attempt parallel connections
for higher throughput by spreading the load over those connections
when a server advertises multi-conn, but for now sticking to one
connection per nbd:// BDS is okay.
See also: https://bugzilla.redhat.com/1708300
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190815185024.7010-1-eblake@redhat.com>
[eblake: tweak blockdev-nbd.c to not request shared when writable,
fix iotest 233]
Reviewed-by: John Snow <jsnow@redhat.com>
|
|
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Almost a third of its inclusions are actually superfluous. Delete
them. Downgrade two more to qapi/qapi-types-run-state.h, and move one
from char/serial.h to char/serial.c.
hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and
stubs/semihost.c define variables declared in sysemu/sysemu.h without
including it. The compiler is cool with that, but include it anyway.
This doesn't reduce actual use much, as it's still included into
widely included headers. The next commit will tackle that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-27-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
|
|
As with the previous patch to qemu-nbd, the nbd-server-start QMP command
also needs to be able to specify authorization when enabling TLS encryption.
First the client must create a QAuthZ object instance using the
'object-add' command:
{
'execute': 'object-add',
'arguments': {
'qom-type': 'authz-list',
'id': 'authz0',
'parameters': {
'policy': 'deny',
'rules': [
{
'match': '*CN=fred',
'policy': 'allow'
}
]
}
}
}
They can then reference this in the new 'tls-authz' parameter when
executing the 'nbd-server-start' command:
{
'execute': 'nbd-server-start',
'arguments': {
'addr': {
'type': 'inet',
'host': '127.0.0.1',
'port': '9000'
},
'tls-creds': 'tls0',
'tls-authz': 'authz0'
}
}
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20190227162035.18543-3-berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
We only had two callers to nbd_export_new; qemu-nbd.c always
passed a valid offset/length pair (because it already checked
the file length, to ensure that offset was in bounds), while
blockdev-nbd.c always passed 0/-1. Then nbd_export_new reduces
the size to a multiple of BDRV_SECTOR_SIZE (can only happen
when offset is not sector-aligned, since bdrv_getlength()
currently rounds up) (someday, it would be nice to have
byte-accurate lengths - but not today).
However, I'm finding it easier to work with the code if we are
consistent on having both callers pass in a valid length, and
just assert that things are sane in nbd_export_new, meaning
that no negative values were passed, and that offset+size does
not exceed 63 bits (as that really is a fundamental limit to
later operations, whether we use off_t or uint64_t).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190117193658.16413-6-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
|
|
We only have one caller that wants to export a bitmap name,
which it does right after creation of the export. But there is
still a brief window of time where an NBD client could see the
export but not the dirty bitmap, which a robust client would
have to interpret as meaning the entire image should be treated
as dirty. Better is to eliminate the window entirely, by
inlining nbd_export_bitmap() into nbd_export_new(), and refusing
to create the bitmap in the first place if the requested bitmap
can't be located.
We also no longer need logic for setting a different bitmap
name compared to the bitmap being exported.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190111194720.15671-8-eblake@redhat.com>
|
|
Now that nbd-server-add can do the same functionality (well, other
than making the exported bitmap name different than the underlying
bitamp - but we argued that was not essential, since it is just as
easy to create a new non-persistent bitmap with the desired name),
we no longer need the experimental separate command.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190111194720.15671-7-eblake@redhat.com>
|
|
With the experimental x-nbd-server-add-bitmap command, there was
a window of time where an NBD client could see the export but not
the associated dirty bitmap, which can cause a client that planned
on using the dirty bitmap to be forced to treat the entire image
as dirty as a safety fallback. Furthermore, if the QMP client
successfully exports a disk but then fails to add the bitmap, it
has to take on the burden of removing the export. Since we don't
allow changing the exposed dirty bitmap (whether to a different
bitmap, or removing advertisement of the bitmap), it is nicer to
make the bitmap tied to the export at the time the export is
created, with automatic failure to export if the bitmap is not
available.
The experimental command included an optional 'bitmap-export-name'
field for remapping the name exposed over NBD to be different from
the bitmap name stored on disk. However, my libvirt demo code
for implementing differential backups on top of persistent bitmaps
did not need to take advantage of that feature (it is instead
possible to create a new temporary bitmap with the desired name,
use block-dirty-bitmap-merge to merge one or more persistent
bitmaps into the temporary, then associate the temporary with the
NBD export, if control is needed over the exported bitmap name).
Hence, I'm not copying that part of the experiment over to the
stable addition. For more details on the libvirt demo, see
https://www.redhat.com/archives/libvir-list/2018-October/msg01254.html,
https://kvmforum2018.sched.com/event/FzuB/facilitating-incremental-backup-eric-blake-red-hat
This patch focuses on the user interface, and reduces (but does
not completely eliminate) the window where an NBD client can see
the export but not the dirty bitmap, with less work to clean up
after errors. Later patches will add further cleanups now that
this interface is declared stable via a single QMP command,
including removing the race window.
Update test 223 to use the new interface.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190111194720.15671-6-eblake@redhat.com>
|
|
The existing NBD code had a weird split where nbd_export_new()
created an export but did not add it to the list of exported
names until a later nbd_export_set_name() came along and grabbed
a second reference on the object; later, the first call to
nbd_export_close() drops the second reference while removing
the export from the list. This is in part because the QAPI
NbdServerRemoveNode enum documents the possibility of adding a
mode where we could do a soft disconnect: preventing new clients,
but waiting for existing clients to gracefully quit, based on
the mode used when calling nbd_export_close().
But in spite of all that, note that we never change the name of
an NBD export while it is exposed, which means it is easier to
just inline the process of setting the name as part of creating
the export.
Inline the contents of nbd_export_set_name() and
nbd_export_set_description() into the two points in an export
lifecycle where they matter, then adjust both callers to pass
the name up front. Note that for creation, all callers pass a
non-NULL name, (passing NULL at creation was for old style
servers, but we removed support for that in commit 7f7dfe2a),
so we can add an assert and do things unconditionally; but for
cleanup, because of the dual nature of nbd_export_close(), we
still have to be careful to avoid use-after-free. Along the
way, add a comment reminding ourselves of the potential of
adding a middle mode disconnect.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190111194720.15671-5-eblake@redhat.com>
|
|
Since we already forbid other nbd-server commands when not
in the right state, it is unlikely that any caller was relying
on a second stop to behave as a silent no-op. Update iotest
223 to show the improved behavior.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190111194720.15671-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
|
|
After the previous commit, nbd_client_new's first parameter is always
NULL. Let's drop it with all corresponding old-style negotiation code
path which is unreachable now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181003170228.95973-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: re-wrap short line]
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
For now, the actual command ix x-nbd-server-add-bitmap, reflecting
the fact that we are still working on libvirt code that proves the
command works as needed, and also the fact that we may remove
bitmap-export-name (and just require that the exported name be the
bitmap name).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180609151758.17343-6-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: make the command experimental by adding x- prefix]
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.
The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h. Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.
To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects. The next commit will
improve it further.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-6-armbru@redhat.com>
|
|
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.
While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
|
|
Add command for removing an export. It is needed for cases when we
don't want to keep the export after the operation on it was completed.
The other example is a temporary node, created with blockdev-add.
If we want to delete it we should firstly remove any corresponding
NBD export.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180119135719.24745-3-vsementsov@virtuozzo.com>
[eblake: drop dead nb_clients code]
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
Allow user to specify name for new export, to not reuse internal
node name and to not show it to clients.
This also allows creating several exports per device.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180119135719.24745-2-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
Instead of creating a QIOChannelSocket directly for the NBD
server socket, use a QIONetListener. This provides the ability
to listen on multiple sockets at the same time, so enables
full support for IPv4/IPv6 dual stack.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20171218101643.20360-2-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Back in qemu 2.5, qemu-nbd was immune to port probes (a transient
server would not quit, regardless of how many probe connections
came and went, until a connection actually negotiated). But we
broke that in commit ee7d7aa when removing the return value to
nbd_client_new(), although that patch also introduced a bug causing
an assertion failure on a client that fails negotiation. We then
made it worse during refactoring in commit 1a6245a (a segfault
before we could even assert); the (masked) assertion was cleaned
up in d3780c2 (still in 2.6), and just recently we finally fixed
the segfault ("nbd: Fully intialize client in case of failed
negotiation"). But that still means that ever since we added
TLS support to qemu-nbd, we have been vulnerable to an ill-timed
port-scan being able to cause a denial of service by taking down
qemu-nbd before a real client has a chance to connect.
Since negotiation is now handled asynchronously via coroutines,
we no longer have a synchronous point of return by re-adding a
return value to nbd_client_new(). So this patch instead wires
things up to pass the negotiation status through the close_fn
callback function.
Simple test across two terminals:
$ qemu-nbd -f raw -p 30001 file
$ nmap 127.0.0.1 -p 30001 && \
qemu-io -c 'r 0 512' -f raw nbd://localhost:30001
Note that this patch does not change what constitutes successful
negotiation (thus, a client must enter transmission phase before
that client can be considered as a reason to terminate the server
when the connection ends). Perhaps we may want to tweak things
in a later patch to also treat a client that uses NBD_OPT_ABORT
as being a 'successful' negotiation (the client correctly talked
the NBD protocol, and informed us it was not going to use our
export after all), but that's a discussion for another day.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1451614
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170608222617.20376-1-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
SocketAddressLegacy is a simple union, and simple unions are awkward:
they have their variant members wrapped in a "data" object on the
wire, and require additional indirections in C. SocketAddress is the
equivalent flat union. Convert all users of SocketAddressLegacy to
SocketAddress, except for existing external interfaces.
See also commit fce5d53..9445673 and 85a82e8..c5f1ae3.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-7-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Minor editing accident fixed, commit message and a comment tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
The next commit will rename SocketAddressFlat to SocketAddress, and
the commit after that will replace most uses of SocketAddressLegacy by
SocketAddress, replacing most of this commit's renames right back.
Note that checkpatch emits a few "line over 80 characters" warnings.
The long lines are all temporary; the SocketAddressLegacy replacement
will shorten them again.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-5-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Certain features make sense only with certain address families. For
instance, passing file descriptors requires AF_UNIX. Testing
SocketAddress's saddr->type == SOCKET_ADDRESS_KIND_UNIX is obvious,
but problematic: it can't recognize AF_UNIX when type ==
SOCKET_ADDRESS_KIND_FD.
Mark such tests of saddr->type TODO. We may want to check the address
family with getsockname() there.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1490895797-29094-2-git-send-email-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Introduce rules in the top level Makefile that are able to generate
trace.[ch] files in every subdirectory which has a trace-events file.
The top level directory is handled specially, so instead of creating
trace.h, it creates trace-root.h. This allows sub-directories to
include the top level trace-root.h file, without ambiguity wrt to
the trace.g file in the current sub-dir.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170125161417.31949-7-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Ensure that all I/O channels created for NBD are given names
to distinguish their respective roles.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
|
|
There is no reason why an NBD server couldn't be started for any node,
even if it's not on the top level. This converts nbd-server-add to
accept a node-name.
Note that there is a semantic difference between using a BlockBackend
name and the node name of its root: In the former case, the NBD server
is closed on eject; in the latter case, the NBD server doesn't drop its
reference and keeps the image file open this way.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
The builtin NBD server uses its own BlockBackend now instead of reusing
the monitor/guest device one.
This means that it has its own writethrough setting now. The builtin
NBD server always uses writeback caching now regardless of whether the
guest device has WCE enabled. qemu-nbd respects the cache mode given on
the command line.
We still need to keep a reference to the monitor BB because we put an
eject notifier on it, but we don't use it for any I/O.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
This modifies the nbd-server-start QMP command so that it
is possible to request use of TLS. This is done by adding
a new optional parameter "tls-creds" which provides the ID
of a previously created QCryptoTLSCreds object instance.
TLS is only supported when using an IPv4/IPv6 socket listener.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1455129674-17255-17-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This extends the NBD protocol handling code so that it is capable
of negotiating TLS support during the connection setup. This involves
requesting the STARTTLS protocol option before any other NBD options.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1455129674-17255-14-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Now that all callers are converted to use I/O channels for
initial connection setup, it is possible to switch the core
NBD protocol handling core over to use QIOChannel APIs for
actual sockets I/O.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1455129674-17255-7-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This converts the blockdev NBD server to use the QIOChannelSocket
class for initial listener socket setup and accepting of client
connections. Actual I/O is still being performed against the
socket file descriptor using the POSIX socket APIs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1455129674-17255-6-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-16-git-send-email-peter.maydell@linaro.org
|
|
The NBD code uses the BDS close notifier to determine when a medium is
ejected. However, now it should use the BB's BDS removal notifier for
that instead of the BDS's close notifier.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Rename the parameter "close" to "close_fn" to disambiguous with
close(2).
This unifies error handling paths of NBDClient allocation:
nbd_client_new will shutdown the socket and call the "close_fn" callback
if negotiation failed, so the caller don't need a different path than
the normal close.
The returned pointer is never used, make it void in preparation for the
next patch.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1452760863-25350-2-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In particular, don't include it into headers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
|
|
These macros expand into error class enumeration constant, comma,
string. Unclean. Has been that way since commit 13f59ae.
The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.
Clean up as follows:
* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
delete it from the QERR_ macro. No change after preprocessing.
* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
error_setg(...). Again, no change after preprocessing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
|
|
Error classes other than ERROR_CLASS_GENERIC_ERROR should not be used
in new code. Hiding them in QERR_ macros makes new uses hard to spot.
Fortunately, there's just one such macro left. Eliminate it with this
coccinelle semantic patch:
@@
expression EP, E;
@@
-error_set(EP, QERR_DEVICE_NOT_FOUND, E)
+error_set(EP, ERROR_CLASS_DEVICE_NOT_FOUND, "Device '%s' not found", E)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
|
|
Done with following Coccinelle semantic patch, plus manual cosmetic changes in
net/*.c.
@@
expression E1, E2, E3, E4;
@@
- qemu_set_fd_handler2(E1, NULL, E2, E3, E4);
+ qemu_set_fd_handler(E1, E2, E3, E4);
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-8-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1427271528-11624-1-git-send-email-armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <1424887718-10800-9-git-send-email-mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Substitute BlockDriverState by BlockBackend in every globally visible
function provided by nbd.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1416309679-333-5-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
Patch created with Coccinelle, with two manual changes on top:
* Add const to bdrv_iterate_format() to keep the types straight
* Convert the allocation in bdrv_drop_intermediate(), which Coccinelle
inexplicably misses
Coccinelle semantic patch:
@@
type T;
@@
-g_malloc(sizeof(T))
+g_new(T, 1)
@@
type T;
@@
-g_try_malloc(sizeof(T))
+g_try_new(T, 1)
@@
type T;
@@
-g_malloc0(sizeof(T))
+g_new0(T, 1)
@@
type T;
@@
-g_try_malloc0(sizeof(T))
+g_try_new0(T, 1)
@@
type T;
expression n;
@@
-g_malloc(sizeof(T) * (n))
+g_new(T, n)
@@
type T;
expression n;
@@
-g_try_malloc(sizeof(T) * (n))
+g_try_new(T, n)
@@
type T;
expression n;
@@
-g_malloc0(sizeof(T) * (n))
+g_new0(T, n)
@@
type T;
expression n;
@@
-g_try_malloc0(sizeof(T) * (n))
+g_try_new0(T, n)
@@
type T;
expression p, n;
@@
-g_realloc(p, sizeof(T) * (n))
+g_renew(T, p, n)
@@
type T;
expression p, n;
@@
-g_try_realloc(p, sizeof(T) * (n))
+g_try_renew(T, p, n)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This forces finishing data sending to client before closing the socket like in
exports listing or replying with NBD_REP_ERR_UNSUP cases.
Signed-off-by: Hani Benhabiles <kroosec@gmail.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The device is exported with erroneous values and can't be read.
Before the patch:
$ sudo nbd-client localhost -p 10809 /dev/nbd0 -name floppy0
Negotiation: ..size = 17592186044415MB
bs=1024, sz=18446744073709547520 bytes
$ sudo mount /dev/nbd0 /mnt/tmp/
mount: block device /dev/nbd0 is write-protected, mounting read-only
mount: /dev/nbd0: can't read superblock
After the patch:
(qemu) nbd_server_add ide0-hd0
(qemu) nbd_server_add floppy0
Device 'floppy0' has no medium
Signed-off-by: Hani Benhabiles <kroosec@gmail.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Otherwise, the nbd client may hang waiting for the server response.
Signed-off-by: Hani Benhabiles <hani@linux.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Previously, nbd calls drive_get_ref() on the drive of bs. A BDS doesn't
always have associated dinfo, which nbd doesn't care either. We already
have BDS ref count, so use it to make it safe for a BDS w/o blockdev.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
