aboutsummaryrefslogtreecommitdiff
path: root/blockdev-nbd.c
AgeCommit message (Collapse)AuthorFilesLines
2022-05-12nbd/server: Allow MULTI_CONN for shared writable exportsEric Blake1-0/+5
According to the NBD spec, a server that advertises NBD_FLAG_CAN_MULTI_CONN promises that multiple client connections will not see any cache inconsistencies: when properly separated by a single flush, actions performed by one client will be visible to another client, regardless of which client did the flush. We always satisfy these conditions in qemu - even when we support multiple clients, ALL clients go through a single point of reference into the block layer, with no local caching. The effect of one client is instantly visible to the next client. Even if our backend were a network device, we argue that any multi-path caching effects that would cause inconsistencies in back-to-back actions not seeing the effect of previous actions would be a bug in that backend, and not the fault of caching in qemu. As such, it is safe to unconditionally advertise CAN_MULTI_CONN for any qemu NBD server situation that supports parallel clients. Note, however, that we don't want to advertise CAN_MULTI_CONN when we know that a second client cannot connect (for historical reasons, qemu-nbd defaults to a single connection while nbd-server-add and QMP commands default to unlimited connections; but we already have existing means to let either style of NBD server creation alter those defaults). This is visible by no longer advertising MULTI_CONN for 'qemu-nbd -r' without -e, as in the iotest nbd-qemu-allocation. The harder part of this patch is setting up an iotest to demonstrate behavior of multiple NBD clients to a single server. It might be possible with parallel qemu-io processes, but I found it easier to do in python with the help of libnbd, and help from Nir and Vladimir in writing the test. Signed-off-by: Eric Blake <eblake@redhat.com> Suggested-by: Nir Soffer <nsoffer@redhat.com> Suggested-by: Vladimir Sementsov-Ogievskiy <v.sementsov-og@mail.ru> Message-Id: <20220512004924.417153-3-eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-05-12qemu-nbd: Pass max connections to blockdev layerEric Blake1-4/+4
The next patch wants to adjust whether the NBD server code advertises MULTI_CONN based on whether it is known if the server limits to exactly one client. For a server started by QMP, this information is obtained through nbd_server_start (which can support more than one export); but for qemu-nbd (which supports exactly one export), it is controlled only by the command-line option -e/--shared. Since we already have a hook function used by qemu-nbd, it's easiest to just alter its signature to fit our needs. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20220512004924.417153-2-eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-04-26qapi: nbd-export: allow select bitmaps by node/name pairVladimir Sementsov-Ogievskiy1-1/+7
Hi all! Current logic of relying on search through backing chain is not safe neither convenient. Sometimes it leads to necessity of extra bitmap copying. Also, we are going to add "snapshot-access" driver, to access some snapshot state through NBD. And this driver is not formally a filter, and of course it's not a COW format driver. So, searching through backing chain will not work. Instead of widening the workaround of bitmap searching, let's extend the interface so that user can select bitmap precisely. Note, that checking for bitmap active status is not copied to the new API, I don't see a reason for it, user should understand the risks. And anyway, bitmap from other node is unrelated to this export being read-only or read-write. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org> Message-Id: <20220314213226.362217-3-v.sementsov-og@mail.ru> [eblake: Adjust S-o-b to Vladimir's new email, with permission] Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2022-03-07block/nbd: don't restrict TLS usage to IP socketsDaniel P. Berrangé1-6/+0
The TLS usage for NBD was restricted to IP sockets because validating x509 certificates requires knowledge of the hostname that the client is connecting to. TLS does not have to use x509 certificates though, as PSK (pre-shared keys) provide an alternative credential option. These have no requirement for a hostname and can thus be trivially used for UNIX sockets. Furthermore, with the ability to overide the default hostname for TLS validation in the previous patch, it is now also valid to want to use x509 certificates with FD passing and UNIX sockets. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20220304193610.3293146-6-berrange@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2021-06-29block/nbd: Use qcrypto_tls_creds_check_endpoint()Philippe Mathieu-Daudé1-3/+3
Avoid accessing QCryptoTLSCreds internals by using the qcrypto_tls_creds_check_endpoint() helper. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-02-12qemu-nbd: Use SOMAXCONN for socket listen() backlogEric Blake1-1/+6
Our default of a backlog of 1 connection is rather puny; it gets in the way when we are explicitly allowing multiple clients (such as qemu-nbd -e N [--shared], or nbd-server-start with its default "max-connections":0 for unlimited), but is even a problem when we stick to qemu-nbd's default of only 1 active client but use -t [--persistent] where a second client can start using the server once the first finishes. While the effects are less noticeable on TCP sockets (since the client can poll() to learn when the server is ready again), it is definitely observable on Unix sockets, where on Linux, a client will fail with EAGAIN and no recourse but to sleep an arbitrary amount of time before retrying if the server backlog is already full. Since QMP nbd-server-start is always persistent, it now always requests a backlog of SOMAXCONN; meanwhile, qemu-nbd will request SOMAXCONN if persistent, otherwise its backlog should be based on the expected number of clients. See https://bugzilla.redhat.com/1925045 for a demonstration of where our low backlog prevents libnbd from connecting as many parallel clients as it wants. Reported-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> CC: qemu-stable@nongnu.org Message-Id: <20210209152759.209074-2-eblake@redhat.com> Tested-by: Richard W.M. Jones <rjones@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2020-10-30nbd: Update qapi to support exporting multiple bitmapsEric Blake1-1/+5
Since 'block-export-add' is new to 5.2, we can still tweak the interface; there, allowing 'bitmaps':['str'] is nicer than 'bitmap':'str'. This wires up the qapi and qemu-nbd changes to permit passing multiple bitmaps as distinct metadata contexts that the NBD client may request, but the actual support for more than one will require a further patch to the server. Note that there are no changes made to the existing deprecated 'nbd-server-add' command; this required splitting the QAPI type BlockExportOptionsNbd, which fortunately does not affect QMP introspection. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20201027050556.269064-5-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2020-10-30nbd: Utilize QAPI_CLONE for type conversionEric Blake1-9/+6
Rather than open-coding the translation from the deprecated NbdServerAddOptions type to the preferred BlockExportOptionsNbd, it's better to utilize QAPI_CLONE_MEMBERS. This solves a couple of issues: first, if we do any more refactoring of the base type (which an upcoming patch plans to do), we don't have to revisit the open-coding. Second, our assignment to arg->name is fishy: the generated QAPI code for qapi_free_NbdServerAddOptions does not visit arg->name if arg->has_name is false, but if it DID visit it, we would have introduced a double-free situation when arg is finally freed. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20201027050556.269064-4-eblake@redhat.com>
2020-10-02nbd: Merge nbd_export_new() and nbd_export_create()Kevin Wolf1-35/+5
There is no real reason any more why nbd_export_new() and nbd_export_create() should be separate functions. The latter only performs a few checks before it calls the former. What makes the current state stand out is that it's the only function in BlockExportDriver that is not a static function inside nbd/server.c, but a small wrapper in blockdev-nbd.c that then calls back into nbd/server.c for the real functionality. Move all the checks to nbd/server.c and make the resulting function static to improve readability. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-27-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02block/export: Move writable to BlockExportOptionsKevin Wolf1-13/+5
The 'writable' option is a basic option that will probably be applicable to most if not all export types that we will implement. Move it from NBD to the generic BlockExport layer. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-26-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02block/export: Create BlockBackend in blk_exp_add()Kevin Wolf1-29/+4
Every export type will need a BlockBackend, so creating it centrally in blk_exp_add() instead of the .create driver callback avoids duplication. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-24-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02block/export: Add block-export-delKevin Wolf1-19/+6
Implement a new QMP command block-export-del and make nbd-server-remove a wrapper around it. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-21-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02block/export: Move strong user reference to block_exportsKevin Wolf1-5/+0
The reference owned by the user/monitor that is created when adding the export and dropped when removing it was tied to the 'exports' list in nbd/server.c. Every block export will have a user reference, so move it to the block export level and tie it to the 'block_exports' list in block/export/export.c instead. This is necessary for introducing a QMP command for removing exports. Note that exports are present in block_exports even after the user has requested shutdown. This is different from NBD's exports where exports are immediately removed on a shutdown request, even if they are still in the process of shutting down. In order to avoid that the user still interacts with an export that is shutting down (and possibly removes it a second time), we need to remember if the user actually still owns it. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-20-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02block/export: Add 'id' option to block-export-addKevin Wolf1-0/+1
We'll need an id to identify block exports in monitor commands. This adds one. Note that this is different from the 'name' option in the NBD server, which is the externally visible export name. While block export ids need to be unique in the whole process, export names must be unique only for the same server. Different export types or (potentially in the future) multiple NBD servers can have the same export name externally, but still need different block export ids internally. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-19-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02block/export: Add blk_exp_close_all(_type)Kevin Wolf1-1/+1
This adds a function to shut down all block exports, and another one to shut down the block exports of a single type. The latter is used for now when stopping the NBD server. As soon as we implement support for multiple NBD servers, we'll need a per-server list of exports and it will be replaced by a function using that. As a side effect, the BlockExport layer has a list tracking all existing exports now. closed_exports loses its only user and can go away. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-18-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02block/export: Allocate BlockExport in blk_exp_add()Kevin Wolf1-12/+14
Instead of letting the driver allocate and return the BlockExport object, allocate it already in blk_exp_add() and pass it. This allows us to initialise the generic part before calling into the driver so that the driver can just use these values instead of having to parse the options a second time. For symmetry, move freeing the BlockExport to blk_exp_unref(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-17-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02block/export: Add node-name to BlockExportOptionsKevin Wolf1-11/+33
Every block export needs a block node to export, so add a 'node-name' option to BlockExportOptions and remove the replaced option 'device' from BlockExportOptionsNbd. To maintain compatibility in nbd-server-add, BlockExportOptionsNbd needs to be wrapped by a new type NbdServerAddOptions that adds 'device' back because nbd-server-add doesn't use the BlockExportOptions base type at all (so even without changing it to a 'node-name' option in block-export-add, this compatibility code would be necessary). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-16-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02block/export: Move refcount from NBDExport to BlockExportKevin Wolf1-1/+1
Having a refcount makes sense for all types of block exports. It is also a prerequisite for keeping a list of all exports at the BlockExport level. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-14-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02qemu-nbd: Use blk_exp_add() to create the exportKevin Wolf1-1/+7
With this change, NBD exports are now only created through the BlockExport interface. This allows us finally to move things from the NBD layer to the BlockExport layer if they make sense for other export types, too. blk_exp_add() returns only a weak reference, so the explicit nbd_export_put() goes away. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-12-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02nbd: Remove NBDExport.close callbackKevin Wolf1-1/+1
The export close callback is unused by the built-in NBD server. qemu-nbd uses it only during shutdown to wait for the unrefed export to actually go away. It can just use nbd_export_close_all() instead and do without the callback. This removes the close callback from nbd_export_new() and makes both callers of it more similar. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200924152717.287415-11-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02nbd: Add writethrough to block-export-addKevin Wolf1-1/+5
qemu-nbd allows use of writethrough cache modes, which mean that write requests made through NBD will cause a flush before they complete. Expose the same functionality in block-export-add. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-10-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02nbd: Add max-connections to nbd-server-startKevin Wolf1-7/+26
This is a QMP equivalent of qemu-nbd's --shared option, limiting the maximum number of clients that can attach at the same time. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200924152717.287415-9-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02block/export: Remove magic from block-export-addKevin Wolf1-8/+39
nbd-server-add tries to be convenient and adds two questionable features that we don't want to share in block-export-add, even for NBD exports: 1. When requesting a writable export of a read-only device, the export is silently downgraded to read-only. This should be an error in the context of block-export-add. 2. When using a BlockBackend name, unplugging the device from the guest will automatically stop the NBD server, too. This may sometimes be what you want, but it could also be very surprising. Let's keep things explicit with block-export-add. If the user wants to stop the export, they should tell us so. Move these things into the nbd-server-add QMP command handler so that they apply only there. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-8-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02qemu-nbd: Use raw block driver for --offsetKevin Wolf1-8/+1
Instead of implementing qemu-nbd --offset in the NBD code, just put a raw block node with the requested offset on top of the user image and rely on that doing the job. This does not only simplify the nbd_export_new() interface and bring it closer to the set of options that the nbd-server-add QMP command offers, but in fact it also eliminates a potential source for bugs in the NBD code which previously had to add the offset manually in all relevant places. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200924152717.287415-7-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02block/export: Add BlockExport infrastructure and block-export-addKevin Wolf1-7/+21
We want to have a common set of commands for all types of block exports. Currently, this is only NBD, but we're going to add more types. This patch adds the basic BlockExport and BlockExportDriver structs and a QMP command block-export-add that creates a new export based on the given BlockExportOptions. qmp_nbd_server_add() becomes a wrapper around qmp_block_export_add(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200924152717.287415-5-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02qapi: Rename BlockExport to BlockExportOptionsKevin Wolf1-1/+1
The name BlockExport will be used for the struct containing the runtime state of block exports, so change the name of export creation options. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200924152717.287415-4-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02qapi: Create block-export moduleKevin Wolf1-1/+1
Move all block export related types and commands from block-core to the new QAPI module block-export. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200924152717.287415-3-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06blockdev-nbd: Boxed argument type for nbd-server-addKevin Wolf1-19/+16
Move the arguments of nbd-server-add to a new struct BlockExportNbd and convert the command to 'boxed': true. This makes it easier to share code with the storage daemon. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200224143008.13362-11-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06qemu-storage-daemon: Add --nbd-server optionKevin Wolf1-0/+5
Add a --nbd-server option to qemu-storage-daemon to start the built-in NBD server right away. It maps the arguments for nbd-server-start to the command line, with the exception that it uses SocketAddress instead of SocketAddressLegacy: New interfaces shouldn't use legacy types, and the additional nesting would be nasty on the command line. Example (only with required options): --nbd-server addr.type=inet,addr.host=localhost,addr.port=10809 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200224143008.13362-10-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-02-05nbd: Allow description when creating NBD blockdevEric Blake1-1/+8
Allow blockdevs to match the feature already present in qemu-nbd -D. Enhance iotest 223 to cover it. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20191114024635.11363-5-eblake@redhat.com>
2019-11-18nbd: Don't send oversize stringsEric Blake1-0/+5
Qemu as server currently won't accept export names larger than 256 bytes, nor create dirty bitmap names longer than 1023 bytes, so most uses of qemu as client or server have no reason to get anywhere near the NBD spec maximum of a 4k limit per string. However, we weren't actually enforcing things, ignoring when the remote side violates the protocol on input, and also having several code paths where we send oversize strings on output (for example, qemu-nbd --description could easily send more than 4k). Tighten things up as follows: client: - Perform bounds check on export name and dirty bitmap request prior to handing it to server - Validate that copied server replies are not too long (ignoring NBD_INFO_* replies that are not copied is not too bad) server: - Perform bounds check on export name and description prior to advertising it to client - Reject client name or metadata query that is too long - Adjust things to allow full 4k name limit rather than previous 256 byte limit Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20191114024635.11363-4-eblake@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2019-09-24nbd: Grab aio context lock in more placesEric Blake1-2/+12
When iothreads are in use, the failure to grab the aio context results in an assertion failure when trying to unlock things during blk_unref, when trying to unlock a mutex that was not locked. In short, all calls to nbd_export_put need to done while within the correct aio context. But since nbd_export_put can recursively reach itself via nbd_export_close, and recursively grabbing the context would deadlock, we can't do the context grab directly in those functions, but must do so in their callers. Hoist the use of the correct aio_context from nbd_export_new() to its caller qmp_nbd_server_add(). Then tweak qmp_nbd_server_remove(), nbd_eject_notifier(), and nbd_esport_close_all() to grab the right context, so that all callers during qemu now own the context before nbd_export_put() can call blk_unref(). Remaining uses in qemu-nbd don't matter (since that use case does not support iothreads). Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190917023917.32226-1-eblake@redhat.com> Reviewed-by: Sergio Lopez <slp@redhat.com>
2019-09-05nbd: Improve per-export flag handling in serverEric Blake1-2/+1
When creating a read-only image, we are still advertising support for TRIM and WRITE_ZEROES to the client, even though the client should not be issuing those commands. But seeing this requires looking across multiple functions: All callers to nbd_export_new() passed a single flag based solely on whether the export allows writes. Later, we then pass a constant set of flags to nbd_negotiate_options() (namely, the set of flags which we always support, at least for writable images), which is then further dynamically modified with NBD_FLAG_SEND_DF based on client requests for structured options. Finally, when processing NBD_OPT_EXPORT_NAME or NBD_OPT_EXPORT_GO we bitwise-or the original caller's flag with the runtime set of flags we've built up over several functions. Let's refactor things to instead compute a baseline of flags as soon as possible which gets shared between multiple clients, in nbd_export_new(), and changing the signature for the callers to pass in a simpler bool rather than having to figure out flags. We can then get rid of the 'myflags' parameter to various functions, and instead refer to client for everything we need (we still have to perform a bitwise-OR for NBD_FLAG_SEND_DF during NBD_OPT_EXPORT_NAME and NBD_OPT_EXPORT_GO, but it's easier to see what is being computed). This lets us quit advertising senseless flags for read-only images, as well as making the next patch for exposing FAST_ZERO support easier to write. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190823143726.27062-2-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: improve commit message, update iotest 223]
2019-09-05nbd: Advertise multi-conn for shared read-only connectionsEric Blake1-1/+1
The NBD specification defines NBD_FLAG_CAN_MULTI_CONN, which can be advertised when the server promises cache consistency between simultaneous clients (basically, rules that determine what FUA and flush from one client are able to guarantee for reads from another client). When we don't permit simultaneous clients (such as qemu-nbd without -e), the bit makes no sense; and for writable images, we probably have a lot more work before we can declare that actions from one client are cache-consistent with actions from another. But for read-only images, where flush isn't changing any data, we might as well advertise multi-conn support. What's more, advertisement of the bit makes it easier for clients to determine if 'qemu-nbd -e' was in use, where a second connection will succeed rather than hang until the first client goes away. This patch affects qemu as server in advertising the bit. We may want to consider patches to qemu as client to attempt parallel connections for higher throughput by spreading the load over those connections when a server advertises multi-conn, but for now sticking to one connection per nbd:// BDS is okay. See also: https://bugzilla.redhat.com/1708300 Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190815185024.7010-1-eblake@redhat.com> [eblake: tweak blockdev-nbd.c to not request shared when writable, fix iotest 233] Reviewed-by: John Snow <jsnow@redhat.com>
2019-09-03socket: Add num connections to qio_net_listener_open_sync()Juan Quintela1-1/+1
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-08-16Clean up inclusion of sysemu/sysemu.hMarkus Armbruster1-1/+0
In my "build everything" tree, changing sysemu/sysemu.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Almost a third of its inclusions are actually superfluous. Delete them. Downgrade two more to qapi/qapi-types-run-state.h, and move one from char/serial.h to char/serial.c. hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and stubs/semihost.c define variables declared in sysemu/sysemu.h without including it. The compiler is cool with that, but include it anyway. This doesn't reduce actual use much, as it's still included into widely included headers. The next commit will tackle that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-27-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-03-06nbd: allow authorization with nbd-server-start QMP commandDaniel P. Berrange1-3/+8
As with the previous patch to qemu-nbd, the nbd-server-start QMP command also needs to be able to specify authorization when enabling TLS encryption. First the client must create a QAuthZ object instance using the 'object-add' command: { 'execute': 'object-add', 'arguments': { 'qom-type': 'authz-list', 'id': 'authz0', 'parameters': { 'policy': 'deny', 'rules': [ { 'match': '*CN=fred', 'policy': 'allow' } ] } } } They can then reference this in the new 'tls-authz' parameter when executing the 'nbd-server-start' command: { 'execute': 'nbd-server-start', 'arguments': { 'addr': { 'type': 'inet', 'host': '127.0.0.1', 'port': '9000' }, 'tls-creds': 'tls0', 'tls-authz': 'authz0' } } Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20190227162035.18543-3-berrange@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2019-01-21nbd/server: Hoist length check to qmp_nbd_server_addEric Blake1-1/+9
We only had two callers to nbd_export_new; qemu-nbd.c always passed a valid offset/length pair (because it already checked the file length, to ensure that offset was in bounds), while blockdev-nbd.c always passed 0/-1. Then nbd_export_new reduces the size to a multiple of BDRV_SECTOR_SIZE (can only happen when offset is not sector-aligned, since bdrv_getlength() currently rounds up) (someday, it would be nice to have byte-accurate lengths - but not today). However, I'm finding it easier to work with the code if we are consistent on having both callers pass in a valid length, and just assert that things are sane in nbd_export_new, meaning that no negative values were passed, and that offset+size does not exceed 63 bits (as that really is a fundamental limit to later operations, whether we use off_t or uint64_t). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190117193658.16413-6-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2019-01-14nbd: Merge nbd_export_bitmap into nbd_export_newEric Blake1-10/+1
We only have one caller that wants to export a bitmap name, which it does right after creation of the export. But there is still a brief window of time where an NBD client could see the export but not the dirty bitmap, which a robust client would have to interpret as meaning the entire image should be treated as dirty. Better is to eliminate the window entirely, by inlining nbd_export_bitmap() into nbd_export_new(), and refusing to create the bitmap in the first place if the requested bitmap can't be located. We also no longer need logic for setting a different bitmap name compared to the bitmap being exported. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20190111194720.15671-8-eblake@redhat.com>
2019-01-14nbd: Remove x-nbd-server-add-bitmapEric Blake1-23/+0
Now that nbd-server-add can do the same functionality (well, other than making the exported bitmap name different than the underlying bitamp - but we argued that was not essential, since it is just as easy to create a new non-persistent bitmap with the desired name), we no longer need the experimental separate command. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20190111194720.15671-7-eblake@redhat.com>
2019-01-14nbd: Allow bitmap export during QMP nbd-server-addEric Blake1-1/+11
With the experimental x-nbd-server-add-bitmap command, there was a window of time where an NBD client could see the export but not the associated dirty bitmap, which can cause a client that planned on using the dirty bitmap to be forced to treat the entire image as dirty as a safety fallback. Furthermore, if the QMP client successfully exports a disk but then fails to add the bitmap, it has to take on the burden of removing the export. Since we don't allow changing the exposed dirty bitmap (whether to a different bitmap, or removing advertisement of the bitmap), it is nicer to make the bitmap tied to the export at the time the export is created, with automatic failure to export if the bitmap is not available. The experimental command included an optional 'bitmap-export-name' field for remapping the name exposed over NBD to be different from the bitmap name stored on disk. However, my libvirt demo code for implementing differential backups on top of persistent bitmaps did not need to take advantage of that feature (it is instead possible to create a new temporary bitmap with the desired name, use block-dirty-bitmap-merge to merge one or more persistent bitmaps into the temporary, then associate the temporary with the NBD export, if control is needed over the exported bitmap name). Hence, I'm not copying that part of the experiment over to the stable addition. For more details on the libvirt demo, see https://www.redhat.com/archives/libvir-list/2018-October/msg01254.html, https://kvmforum2018.sched.com/event/FzuB/facilitating-incremental-backup-eric-blake-red-hat This patch focuses on the user interface, and reduces (but does not completely eliminate) the window where an NBD client can see the export but not the dirty bitmap, with less work to clean up after errors. Later patches will add further cleanups now that this interface is declared stable via a single QMP command, including removing the race window. Update test 223 to use the new interface. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20190111194720.15671-6-eblake@redhat.com>
2019-01-14nbd: Merge nbd_export_set_name into nbd_export_newEric Blake1-3/+2
The existing NBD code had a weird split where nbd_export_new() created an export but did not add it to the list of exported names until a later nbd_export_set_name() came along and grabbed a second reference on the object; later, the first call to nbd_export_close() drops the second reference while removing the export from the list. This is in part because the QAPI NbdServerRemoveNode enum documents the possibility of adding a mode where we could do a soft disconnect: preventing new clients, but waiting for existing clients to gracefully quit, based on the mode used when calling nbd_export_close(). But in spite of all that, note that we never change the name of an NBD export while it is exposed, which means it is easier to just inline the process of setting the name as part of creating the export. Inline the contents of nbd_export_set_name() and nbd_export_set_description() into the two points in an export lifecycle where they matter, then adjust both callers to pass the name up front. Note that for creation, all callers pass a non-NULL name, (passing NULL at creation was for old style servers, but we removed support for that in commit 7f7dfe2a), so we can add an assert and do things unconditionally; but for cleanup, because of the dual nature of nbd_export_close(), we still have to be careful to avoid use-after-free. Along the way, add a comment reminding ourselves of the potential of adding a middle mode disconnect. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20190111194720.15671-5-eblake@redhat.com>
2019-01-14nbd: Forbid nbd-server-stop when server is not runningEric Blake1-0/+5
Since we already forbid other nbd-server commands when not in the right state, it is unlikely that any caller was relying on a second stop to behave as a silent no-op. Update iotest 223 to show the improved behavior. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190111194720.15671-3-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2018-10-03nbd/server: drop old-style negotiationVladimir Sementsov-Ogievskiy1-2/+1
After the previous commit, nbd_client_new's first parameter is always NULL. Let's drop it with all corresponding old-style negotiation code path which is unreachable now. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20181003170228.95973-3-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: re-wrap short line] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-06-21qapi: new qmp command nbd-server-add-bitmapVladimir Sementsov-Ogievskiy1-0/+23
For now, the actual command ix x-nbd-server-add-bitmap, reflecting the fact that we are still working on libvirt code that proves the command works as needed, and also the fact that we may remove bitmap-export-name (and just require that the exported name be the bitmap name). Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20180609151758.17343-6-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: make the command experimental by adding x- prefix] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02Include less of the generated modular QAPI headersMarkus Armbruster1-1/+1
In my "build everything" tree, a change to the types in qapi-schema.json triggers a recompile of about 4800 out of 5100 objects. The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h, qapi-types.h. Each of these headers still includes all its shards. Reduce compile time by including just the shards we actually need. To illustrate the benefits: adding a type to qapi/migration.json now recompiles some 2300 instead of 4800 objects. The next commit will improve it further. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-24-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> [eblake: rebase to master] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-09Drop superfluous includes of qapi/qmp/qerror.hMarkus Armbruster1-1/+0
Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-6-armbru@redhat.com>
2018-02-09Include qapi/error.h exactly where neededMarkus Armbruster1-0/+1
This cleanup makes the number of objects depending on qapi/error.h drop from 1910 (out of 4743) to 1612 in my "build everything" tree. While there, separate #include from file comment with a blank line, and drop a useless comment on why qemu/osdep.h is included first. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-5-armbru@redhat.com> [Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
2018-01-26qapi: add nbd-server-removeVladimir Sementsov-Ogievskiy1-0/+24
Add command for removing an export. It is needed for cases when we don't want to keep the export after the operation on it was completed. The other example is a temporary node, created with blockdev-add. If we want to delete it we should firstly remove any corresponding NBD export. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20180119135719.24745-3-vsementsov@virtuozzo.com> [eblake: drop dead nb_clients code] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-01-26qapi: add name parameter to nbd-server-addVladimir Sementsov-Ogievskiy1-5/+9
Allow user to specify name for new export, to not reuse internal node name and to not show it to clients. This also allows creating several exports per device. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180119135719.24745-2-vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com>