aboutsummaryrefslogtreecommitdiff
path: root/block
AgeCommit message (Collapse)AuthorFilesLines
2014-07-07linux-aio: implement io plug, unplug and flush io queueMing Lei3-2/+141
This patch implements .bdrv_io_plug, .bdrv_io_unplug and .bdrv_flush_io_queue callbacks for linux-aio Block Drivers, so that submitting I/O as a batch can be supported on linux-aio. [Unprocessed requests are completed with -EIO instead of a bogus ret value. --Stefan] Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-07raw-posix: Fix raw_getlength() to always return -errno on errorMarkus Armbruster1-6/+22
We got a merry mix of -1 and -errno here. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-07mirror: Fix qiov size for short requestsKevin Wolf1-1/+3
When mirroring an image of a size that is not a multiple of the mirror job granularity, the last request would have the right nb_sectors argument, but a qiov that is rounded up to the next multiple of the granularity. Don't do this. This fixes a segfault that is caused by raw-posix being confused by this and allocating a buffer with request length, but operating on it with qiov length. [s/Driver/Drive/ in qemu-iotests 041 as suggested by Eric --Stefan] Reported-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-01block: add backing-file option to block-streamJeff Cody1-6/+5
On some image chains, QEMU may not always be able to resolve the filenames properly, when updating the backing file of an image after a block job. For instance, certain relative pathnames may fail, or drives may have been specified originally by file descriptor (e.g. /dev/fd/???), or a relative protocol pathname may have been used. In these instances, QEMU may lack the information to be able to make the correct choice, but the user or management layer most likely does have that knowledge. With this extension to the block-stream api, the user is able to change the backing file of the active layer as part of the block-stream operation. This allows the change to be 'safe', in the sense that if the attempt to write the active image metadata fails, then the block-stream operation returns failure, without disrupting the guest. If a backing file string is not specified in the command, the backing file string to use is determined in the same manner as it was previously. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-01block: extend block-commit to accept a string for the backing fileJeff Cody1-3/+6
On some image chains, QEMU may not always be able to resolve the filenames properly, when updating the backing file of an image after a block commit. For instance, certain relative pathnames may fail, or drives may have been specified originally by file descriptor (e.g. /dev/fd/???), or a relative protocol pathname may have been used. In these instances, QEMU may lack the information to be able to make the correct choice, but the user or management layer most likely does have that knowledge. With this extension to the block-commit api, the user is able to change the backing file of the overlay image as part of the block-commit operation. This allows the change to be 'safe', in the sense that if the attempt to write the overlay image metadata fails, then the block-commit operation returns failure, without disrupting the guest. If the commit top is the active layer, then specifying the backing file string will be treated as an error (there is no overlay image to modify in that case). If a backing file string is not specified in the command, the backing file string to use is determined in the same manner as it was previously. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-01block/cow: Avoid use of uninitialized cow_bs in error pathPeter Maydell1-3/+4
Commit 25814e8987 introduced an error-exit code path which does a "goto exit" before the cow_bs variable is initialized, meaning we would call bdrv_unref() on an uninitialized variable and likely segfault. Fix this by moving the NULL-initialization to the top of the function and making the exit code path handle the case where it is NULL. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-01qemu-img create: add 'nocow' optionChunyan Liu5-6/+89
Add 'nocow' option so that users could have a chance to set NOCOW flag to newly created files. It's useful on btrfs file system to enhance performance. Btrfs has low performance when hosting VM images, even more when the guest in those VM are also using btrfs as file system. One way to mitigate this bad performance is to turn off COW attributes on VM files. Generally, there are two ways to turn off NOCOW on btrfs: a) by mounting fs with nodatacow, then all newly created files will be NOCOW. b) per file. Add the NOCOW file attribute. It could only be done to empty or new files. This patch tries the second way, according to the option, it could add NOCOW per file. For most block drivers, since the create file step is in raw-posix.c, so we can do setting NOCOW flag ioctl in raw-posix.c only. But there are some exceptions, like block/vpc.c and block/vdi.c, they are creating file by calling qemu_open directly. For them, do the same setting NOCOW flag ioctl work in them separately. [Fixed up 082.out due to the new 'nocow' creation option --Stefan] Signed-off-by: Chunyan Liu <cyliu@suse.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-27block: Add replaces argument to drive-mirrorBenoît Canet1-13/+47
drive-mirror will bdrv_swap the new BDS named node-name with the one pointed by replaces when the mirroring is finished. Signed-off-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-06-27block: acquire AioContext in qmp_query_blockstats()Stefan Hajnoczi1-0/+4
Make query-blockstats safe for dataplane by acquiring the BlockDriverState's AioContext. This ensures that the dataplane IOThread and the main loop's monitor code do not race. Note the assumption that acquiring the drive's BDS AioContext also protects ->file and ->backing_hd. This assumption is made by other aio_context_acquire() callers too. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Tested-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-06-27block: make bdrv_query_stats() staticStefan Hajnoczi1-1/+1
This function is only called from block/qapi.c. There is no need to keep it public. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Tested-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-06-27quorum: Add the rewrite-corrupted parameter to quorumBenoît Canet1-6/+91
On read operations when this parameter is set and some replicas are corrupted while quorum can be reached quorum will proceed to rewrite the correct version of the data to fix the corrupted replicas. This will shine with SSD where the FTL will remap the same block at another place on rewrite. Signed-off-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-06-26block: Catch backing files assigned to non-COW driversKevin Wolf5-0/+5
Since we parse backing.* options to add a backing file from the command line when the driver didn't assign one, it has been possible to have a backing file for e.g. raw images (it just was never accessed). This is obvious nonsense and should be rejected. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-06-26block/nfs: add knob to set readaheadPeter Lieven1-0/+4
upcoming libnfs will feature internal readahead support. Add a knob to pass the optional readahead value as a URL parameter. Signed-off-by: Peter Lieven <pl@kamp.de> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-06-26block/nfs: fix url parameter checkingPeter Lieven1-6/+12
this patch fixes the incorrect usage of strncmp and adds simple error checking by means of parse_uint_full instead of atoi for the supplied URL parameters. Signed-off-by: Peter Lieven <pl@kamp.de> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-06-26mirror: Go through ready -> complete process for 0 len imageFam Zheng1-1/+10
When mirroring or active committing a zero length image, BLOCK_JOB_READY is not reported now, instead the job completes because we short circuit the mirror job loop. This is inconsistent with non-zero length images, and only confuses management software. Let's do the same thing when seeing a 0-length image: report ready immediately; wait for block-job-cancel or block-job-complete; clear the cancel flag as existing non-zero image synced case (cancelled after ready); then jump to the exit. Reported-by: Eric Blake <eblake@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-06-24Fix new typos (found by codespell)Stefan Weil1-1/+1
* accomodate -> accommodate * aquiring -> acquiring * beacuse -> because * loosing -> losing * prefering -> preferring * threshhold -> threshold Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-06-23qapi event: convert QUORUM eventsWenchao Xia1-17/+8
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-23qapi event: convert other BLOCK_JOB eventsWenchao Xia1-1/+1
Since BLOCK_JOB_COMPLETED, BLOCK_JOB_CANCELLED, BLOCK_JOB_READY are related, convert them in one patch. The block_job_event_* functions are used to keep encapsulation of BlockJob structure. Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-23qapi event: convert BLOCK_IMAGE_CORRUPTEDWenchao Xia1-6/+8
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-23qapi: adjust existing definesWenchao Xia3-6/+7
In order to let event defines use existing types later, instead of redefine new ones, some old type defines for spice and vnc are changed, and BlockErrorAction is moved from block.h to qapi schema. Note that BlockErrorAction is not merged with BlockdevOnError. At this point, VncInfo is not made a child of VncBasicInfo, because VncBasicInfo has mandatory fields where VncInfo makes them optional. Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-23sheepdog: fix NULL dereference in sd_createLiu Yuan1-0/+1
Following command qemu-img create -f qcow2 sheepdog:test 20g will cause core dump because aio_context is NULL in sd_create. We should initialize it by qemu_get_aio_context() to avoid NULL dereference. Cc: qemu-devel@nongnu.org Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Liu Yuan <namei.unix@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-18block/iscsi: drop obsolete pointers from iscsi_co_writevPeter Lieven1-7/+2
Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-18block/iscsi: fix init value for iTask->retriesPeter Lieven1-1/+0
during rebasing the changed init value for the retry counter was missed. This resulted in no retries being performed at all. Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-18block/iscsi: bump libiscsi requirement to 1.9.0Peter Lieven1-67/+0
This patch lifts the minimum supported libiscsi version from 1.4.0 to 1.9.0 since the BUSY patch required that change. On one this allows us to remove all #ifdefs from the code which makes the code easier to maintain and read. On the other hand I would not recommend libiscsi prior to 1.8.0 for production use because the following important libiscsi fixes for deadlocks and protocol errors are missing prior to 1.8.0: dbe9a1e SOCKET queue cmd PDUs directly in waitpdu queue 30df192 DATA-OUT set pdu->cmdsn appropriately 548bd22 ISCSI fix broken send logic in iscsi_scsi_async_command 14bee10 RECONNECT do not increase CmdSN for immediate PDUs 1f4a66a PDU queue out PDUs in order of itt. 562dd46 PDU avoid incrementing itt to 0xffffffff cd09c0f PDU use serial32 arithmetic for cmdsn, maxcmdsn and expcmdsn. 89e918e SOCKET validate data_size in in_pdu header 91267f5 Limit immediate and unsolicited data to FirstBurstLength Note that libiscsi 1.9.0 was released on Feb 24th, 2013, about one month after 1.8.0. Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-18block/iscsi: use 16 byte CDBs only when necessaryPeter Lieven1-18/+40
this patch changes the driver to uses 16 Byte CDBs for READ/WRITE only if the target requires 64bit lba addressing. On one hand this saves 6 bytes in each PDU on the other hand it seems that 10 Byte CDBs seems to be much better supported and tested as a recent issue I had with a major storage supplier lined out. For WRITESAME the logic is a bit more tricky as WRITESAME10 with UNMAP was added really late. Thus a fallback to WRITESAME16 is possible if it supports UNMAP and WRITESAME10 not. Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-18block/iscsi: fix potential segfault on early callbackPeter Lieven1-1/+4
it might happen in the future that a function directly invokes its callback. In this case we end up in a segfault because the iTask is gone when the BH is scheduled. Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-18block/iscsi: handle BUSY conditionPeter Lieven1-12/+43
this patch adds handling of BUSY status reponse from an iSCSI target. Currently, we fail with -EIO in case of SCSI_STATUS_BUSY while the obvious reaction would be to retry the operation after some time. The retry time is randomly choosen from a range with exponential growth increasing with each retry. This patch includes most of the changes by a an upcoming patch from Stefan Hajnoczi: iscsi: implement .bdrv_detach/attach_aio_context() because I also need the reference to the aio_context for the retry timer to work. I included the changes to maintain better mergeability. Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-16cleanup QEMUOptionParameterChunyan Liu18-47/+37
Now that all backend drivers are using QemuOpts, remove all QEMUOptionParameter related codes. Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Chunyan Liu <cyliu@suse.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16vpc.c: replace QEMUOptionParameter with QemuOptsChunyan Liu1-28/+34
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Chunyan Liu <cyliu@suse.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16vmdk.c: replace QEMUOptionParameter with QemuOptsChunyan Liu1-60/+63
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Chunyan Liu <cyliu@suse.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16vhdx.c: replace QEMUOptionParameter with QemuOptsChunyan Liu2-52/+48
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Chunyan Liu <cyliu@suse.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16vdi.c: replace QEMUOptionParameter with QemuOptsChunyan Liu1-38/+35
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Chunyan Liu <cyliu@suse.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16ssh.c: replace QEMUOptionParameter with QemuOptsChunyan Liu1-17/+15
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Chunyan Liu <cyliu@suse.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16sheepdog.c: replace QEMUOptionParameter with QemuOptsChunyan Liu1-55/+56
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Chunyan Liu <cyliu@suse.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16rbd.c: replace QEMUOptionParameter with QemuOptsChunyan Liu1-33/+30
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Chunyan Liu <cyliu@suse.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16raw_bsd.c: replace QEMUOptionParameter with QemuOptsChunyan Liu1-12/+15
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Chunyan Liu <cyliu@suse.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16raw-win32.c: replace QEMUOptionParameter with QemuOptsChunyan Liu1-19/+19
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Chunyan Liu <cyliu@suse.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16raw-posix.c: replace QEMUOptionParameter with QemuOptsChunyan Liu1-32/+27
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Chunyan Liu <cyliu@suse.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16qed.c: replace QEMUOptionParameter with QemuOptsChunyan Liu2-56/+61
One extra change is to define QED_DEFAULT_CLUSTER_SIZE = 65536 instead of 64 * 1024; because: according to existing create_options, "cluster size" has default value = QED_DEFAULT_CLUSTER_SIZE, after switching to create_opts, this has to be stringized and set to .def_value_str. That is, .def_value_str = stringify(QED_DEFAULT_CLUSTER_SIZE), so the QED_DEFAULT_CLUSTER_SIZE could not be a expression. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Chunyan Liu <cyliu@suse.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16qcow2.c: replace QEMUOptionParameter with QemuOptsChunyan Liu1-122/+139
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Chunyan Liu <cyliu@suse.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16qcow.c: replace QEMUOptionParameter with QemuOptsChunyan Liu1-36/+36
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Chunyan Liu <cyliu@suse.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16nfs.c: replace QEMUOptionParameter with QemuOptsChunyan Liu1-9/+3
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Chunyan Liu <cyliu@suse.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16iscsi.c: replace QEMUOptionParameter with QemuOptsChunyan Liu1-18/+16
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Chunyan Liu <cyliu@suse.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16gluster.c: replace QEMUOptionParameter with QemuOptsChunyan Liu1-39/+42
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Chunyan Liu <cyliu@suse.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16cow.c: replace QEMUOptionParameter with QemuOptsChunyan Liu1-28/+26
Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Chunyan Liu <cyliu@suse.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16vvfat.c: handle cross_driver's create_options and create_optsChunyan Liu1-7/+17
vvfat shares create options of qcow driver. To avoid vvfat breaking when qcow driver changes from QEMUOptionParameter to QemuOpts, let it able to handle both cases. Signed-off-by: Chunyan Liu <cyliu@suse.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16change block layer to support both QemuOpts and QEMUOptionParamterChunyan Liu8-9/+9
Change block layer to support both QemuOpts and QEMUOptionParameter. After this patch, it will change backend drivers one by one. At the end, QEMUOptionParameter will be removed and only QemuOpts is kept. Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Chunyan Liu <cyliu@suse.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16block/nfs: fix potential segfault on early callbackPeter Lieven1-1/+3
it will happen in the future that the callback of a libnfs call directly invokes the callback. In this case we end up in a segfault because the NFSRPC is gone when we the BH is scheduled. Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16block: Drop superfluous conditionals around g_free()Markus Armbruster2-9/+4
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-10vdi: remove double conversionPaolo Bonzini1-1/+0
This should be a problem when running on big-endian machines. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
generated by cgit v1.1 at 2024-11-03 07:06:29 +0000