| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
We want to use these events to suspend requests for testing concurrent
AIO requests. Suspending requests while they are holding the CoMutex is
rather boring for this purpose.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This allows more systematic AIO testing. The patch adds three new
operations to blkdebug:
* Setting a "breakpoint" on a blkdebug event. The next request that
triggers this breakpoint is suspended and is tagged with a name.
The breakpoint is removed after a request has triggered it.
* A suspended request (identified by it's tag) can be resumed
* It's possible to check whether a suspended request with a given
tag exists. This can be used for waiting for an event.
Ideally, we would instead tag requests right when they are created and
set breakpoints for individual requests. However, at this point the
block layer doesn't allow this easily, and breakpoints that trigger for
any request already allow a lot of useful testing.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The cleanup work to remove a rule depends on the type of the rule. It's
easy for the existing rules as there is no data that must be cleaned up
and is specific to a type yet, but the next patch will change this.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
As soon as new rules can be set during runtime, as introduced by the
next patch, blkdebug makes sense even without a config file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
An error has occurred if the return value is invalid_set_file_pointer
and getlasterror doesn't return no_error.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
This one fixes a race which qemu had also in iscsi block driver
between cancellation and io completition.
qemu_rbd_aio_cancel was not synchronously waiting for the end of
the command.
To archieve this it introduces a new status flag which uses
-EINPROGRESS.
Signed-off-by: Stefan Priebe <s.priebe@profihost.ag>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
clang now warns about an unused function:
CC block/raw-posix.o
block/raw-posix.c:707:26: warning: unused function paio_ioctl
[-Wunused-function]
static BlockDriverAIOCB *paio_ioctl(BlockDriverState *bs, int fd,
^
1 warning generated.
because the only use of paio_ioctl() is inside a #if defined(__linux__)
guard and it is static now.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The VHD specification allows for up to a 2 TB disk size. The current
implementation in qemu emulates EIDE and ATA-2 hardware which only allows
for up to 127 GB. This disk size limitation can be overridden by allowing
up to 255 heads instead of the normal 4 bit limitation of 16. Doing so
allows disk images to be created of up to nearly 2 TB. This change does
not violate the VHD format specification nor does it change how smaller
disks (ie, <=127GB) are defined.
[Charles Arnold also writes: "In analyzing a 160 GB VHD fixed disk image
created on Windows 2008 R2, it appears that MS is also ignoring the CHS
values in the footer geometry field in whatever driver they use for
accessing the image. The CHS values are set at 65535,16,255 which
obviously doesn't represent an image size of 160 GB." -- Stefan]
Signed-off-by: Charles Arnold <carnold@suse.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Initialize the uuid field in the footer with a generated uuid.
Signed-off-by: Charles Arnold <carnold@suse.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
There are no remaining users, and new users should probably be
using bdrv_drain_all() in the first place.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Without any complex checks we can't assume that an
iscsi target is initialized to zero.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
If the connection is interrupted before the first login is successfully
completed qemu-kvm is waiting forever in qemu_aio_wait().
This is fixed by performing an sync login to the target. If the
connection breaks after the first successful login errors are
handled internally by libiscsi.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
If an invalid URL is specified iscsi_get_error(iscsi) is called
with iscsi == NULL.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
rbd / rados tends to return pretty often length of writes
or discarded blocks. These values might be bigger than int.
The steps to reproduce are:
mkfs.xfs -f a whole device bigger than int in bytes. mkfs.xfs sends
a discard. Important is that you use scsi-hd and set
discard_granularity=512. Otherwise rbd disabled discard support.
Signed-off-by: Stefan Priebe <s.priebe@profihost.ag>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
It's poor symbol hygiene to provide a global symbols that collide with a
common library like libuuid. If QEMU links against a shared library
that depends on uuid_generate() it can end up calling our stub version
of the function.
This exact scenario happened with GlusterFS libgfapi.so, which depends
on libglusterfs.so's uuid_generate().
Scope the uuid stubs for vdi.c only and avoid affecting other shared
objects.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
|
|
For hdev, floppy, and cdrom, the reopen() handlers are the same as
for the file reopen handler. For floppy and cdrom types, however,
we keep O_NONBLOCK, as in the _open function.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Fixed a MAJOR BUG in VMDK files on file boundaries on reads
and ALSO ON WRITES WHICH MIGHT CORRUPT THE IMAGE AND DATA!!!!!!
Triggered for example with the following VMDK file (partly listed):
RW 4193792 FLAT "XP-W1-f001.vmdk" 0
RW 2097664 FLAT "XP-W1-f002.vmdk" 0
RW 4193792 FLAT "XP-W1-f003.vmdk" 0
RW 512 FLAT "XP-W1-f004.vmdk" 0
RW 4193792 FLAT "XP-W1-f005.vmdk" 0
RW 2097664 FLAT "XP-W1-f006.vmdk" 0
RW 4193792 FLAT "XP-W1-f007.vmdk" 0
RW 512 FLAT "XP-W1-f008.vmdk" 0
Patch includes:
1.) Patch fixes wrong calculation on extent boundaries. Especially it
fixes the relativeness of the sector number to the current extent.
Verfied correctness with:
1.) Converted either with Virtualbox to VDI and then with qemu-img and
then with qemu-img only:
VBoxManage clonehd --format vdi /VM/XP-W/new/XP-W1.vmdk ~/.VirtualBox/Harddisks/XP-W1-new-test.vdi
./qemu-img convert -O raw ~/.VirtualBox/Harddisks/XP-W1-new-test.vdi /root/QEMU/VM-XP-W1/XP-W1-via-VBOX.img
md5sum /root/QEMU/VM-XP-W/XP-W1-direct.img
md5sum /root/QEMU/VM-XP-W/XP-W1-via-VBOX.img
=> same MD5 hash
2.) Verified debug log files
3.) Run Windows XP successfully
4.) chkdsk run successfully without any errors
Signed-off-by: Gerhard Wiesinger <lists@wiesinger.com>
Acked-by: Fam Zheng <famcool@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Now that AIOPool no longer keeps a freelist, it isn't really a "pool"
anymore. Rename it to AIOCBInfo and make it const since it no longer
needs to be modified.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Versions before gcc-4.6 don't support unnamed fields in initializers
(see http://gcc.gnu.org/bugzilla/show_bug.cgi?id=10676).
Offset and OffsetHigh belong to an unnamed struct which is part of an
unnamed union. Therefore the original code does not work with older
versions of gcc.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
A missing factor for the refcount table entry size in the calculation
could mean that too little memory was allocated for the in-memory
representation of the table, resulting in a buffer overflow.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Tested-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
The URI syntax is consistent with the Gluster syntax. Export names
are specified in the path, preceded by one or more (otherwise unused)
slashes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Adding the "is_unix" member now will simplify the parsing of NBD URIs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
With the new support for EventNotifiers in the AIO event loop, we
can hook a completion port to every opened file and use asynchronous
I/O on them.
Wine's support is extremely inefficient, also because it really does
the I/O synchronously on regular files. (!) But it works, and it is
good to keep the Win32 and POSIX ports as similar as possible.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Making the qemu_paiocb specific to raw devices will let us access members
of the BDRVRawState arbitrarily.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This is not meant for portability, but to remove code duplication.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The Win32 implementation will only accept EventNotifiers, thus a few
drivers are disabled under Windows. EventNotifiers are a good match
for the GSource implementation, too, because the Win32 port of glib
allows to place their HANDLEs in a GPollFD.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Error management is important for mirroring; otherwise, an error on the
target (even something as "innocent" as ENOSPC) requires to start again
with a full copy. Similar to on_read_error/on_write_error, two separate
knobs are provided for on_source_error (reads) and on_target_error (writes).
The default is 'report' for both.
The 'ignore' policy will leave the sector dirty, so that it will be
retried later. Thus, it will not cause corruption.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Switching to the target of the migration is done mostly asynchronously,
and reported to management via the BLOCK_JOB_COMPLETED event; the only
synchronous phase is opening the backing files. bdrv_open_backing_file
can always be done, even for migration of the full image (aka sync:
'full'). In this case, qmp_drive_mirror will create the target disk
with no backing file at all, and bdrv_open_backing_file will be a no-op.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This patch adds the implementation of a new job that mirrors a disk to
a new image while letting the guest continue using the old image.
The target is treated as a "black box" and data is copied from the
source to the target in the background. This can be used for several
purposes, including storage migration, continuous replication, and
observation of the guest I/O in an external program. It is also a
first step in replacing the inefficient block migration code that is
part of QEMU.
The job is possibly never-ending, but it is logically structured into
two phases: 1) copy all data as fast as possible until the target
first gets in sync with the source; 2) keep target in sync and
ensure that reopening to the target gets a correct (full) copy
of the source data.
The second phase is indicated by the progress in "info block-jobs"
reporting the current offset to be equal to the length of the file.
When the job is cancelled in the second phase, QEMU will run the
job until the source is clean and quiescent, then it will report
successful completion of the job.
In other words, the BLOCK_JOB_CANCELLED event means that the target
may _not_ be consistent with a past state of the source; the
BLOCK_JOB_COMPLETED event means that the target is consistent with
a past state of the source. (Note that it could already happen
that management lost the race against QEMU and got a completion
event instead of cancellation).
It is not yet possible to complete the job and switch over to the target
disk. The next patches will fix this and add many refinements to the
basic idea introduced here. These include improved error management,
some tunable knobs and performance optimizations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The imperative will be used for the QMP command.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This simplifies some code and error checking, and also fixes a bug.
bdrv_find_backing_image() should only be passed absolute filenames,
or filenames relative to the chain. In the QMP message handler for
block commit, when looking up the base do so from the determined top
image, so we know it is reachable from top.
Some of the error messages put out by block-commit have changed
slightly, which causes 2 tests cases for block-commit to fail.
This patch updates the test cases to look for the correct error
output.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This improves readability.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
* 'trivial-patches' of git://github.com/stefanha/qemu:
versatilepb: Use symbolic indices for ARM PIC
qdev: kill bogus comment
qemu-barrier: Fix compiler version check for future gcc versions
hw: Add missing 'static' attribute for QEMUMachine
cleanup useless return sentence
qemu-sockets: Fix compiler warning (regression for MinGW)
vnc: Fix spelling (hellmen -> hellman) in comment
slirp: Fix spelling in comment (enought -> enough, insure -> ensure)
tcg/arm: Use tcg_out_mov_reg rather than inline equivalent code
cpu: Add missing 'static' attribute to qemu_global_mutex
configure: Support empty target list (--target-list=)
hw: Fix return value check for bdrv_read, bdrv_write
|
|
This patch cleans up return sentences in the end of void functions.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
|
|
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Avoid strncpy+manual-NUL-terminate. Use pstrcpy instead.
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
* parse_vdiname: Use pstrcpy, not strncpy, when the destination
buffer must be NUL-terminated.
* sd_open: Likewise, avoid buffer overrun.
* do_sd_create: Likewise. Leave the preceding memset, since
pstrcpy does not NUL-fill, and filename needs that.
* sd_snapshot_create: Add a comment/question.
* find_vdi_name: Remove a useless memset.
* sd_snapshot_goto: Remove a useless memset.
Use pstrcpy to NUL-terminate, because find_vdi_name requires
that its vdi arg (filename parameter) be NUL-terminated.
It seems ok not to NUL-fill the buffer.
Do the same for snapid: remove useless memset-0 (instead,
zero tag[0]). Use pstrcpy, not strncpy.
* sd_snapshot_list: Use pstrcpy, not strncpy to write
into the ->name member. Each must be NUL-terminated.
Acked-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Currently it is impossible to write a blkdebug script that ping-pongs
between two states, because the second set-state rule will use the
state that is set in the first. If you have
[set-state]
event = "..."
state = "1"
new_state = "2"
[set-state]
event = "..."
state = "2"
new_state = "1"
for example the state will remain locked at 1. This can be fixed
by first processing all rules, and then setting the state.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This patch adds support for error management to streaming.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This will let block-stream reuse the enum. Places that used the enums
are renamed accordingly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds the live commit coroutine. This iteration focuses on the
commit only below the active layer, and not the active layer itself.
The behaviour is similar to block streaming; the sectors are walked
through, and anything that exists above 'base' is committed back down
into base. At the end, intermediate images are deleted, and the
chain stitched together. Images are restored to their original open
flags upon completion.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This patch adds gluster as the new block backend in QEMU. This gives
QEMU the ability to boot VM images from gluster volumes. Its already
possible to boot from VM images on gluster volumes using FUSE mount, but
this patchset provides the ability to boot VM images from gluster volumes
by by-passing the FUSE layer in gluster. This is made possible by
using libgfapi routines to perform IO on gluster volumes directly.
VM Image on gluster volume is specified like this:
file=gluster[+transport]://[server[:port]]/volname/image[?socket=...]
'gluster' is the protocol.
'transport' specifies the transport type used to connect to gluster
management daemon (glusterd). Valid transport types are
tcp, unix and rdma. If a transport type isn't specified, then tcp
type is assumed.
'server' specifies the server where the volume file specification for
the given volume resides. This can be either hostname, ipv4 address
or ipv6 address. ipv6 address needs to be within square brackets [ ].
If transport type is 'unix', then 'server' field should not be specifed.
The 'socket' field needs to be populated with the path to unix domain
socket.
'port' is the port number on which glusterd is listening. This is optional
and if not specified, QEMU will send 0 which will make gluster to use the
default port. If the transport type is unix, then 'port' should not be
specified.
'volname' is the name of the gluster volume which contains the VM image.
'image' is the path to the actual VM image that resides on gluster volume.
Examples:
file=gluster://1.2.3.4/testvol/a.img
file=gluster+tcp://1.2.3.4/testvol/a.img
file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img
file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img
file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img
file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img
file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket
file=gluster+rdma://1.2.3.4:24007/testvol/a.img
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
* kwolf/for-anthony:
block: remove keep_read_only flag from BlockDriverState struct
block: convert bdrv_commit() to use bdrv_reopen()
block: vpc image file reopen
block: vdi image file reopen
block: vmdk image file reopen
block: qcow image file reopen
block: qcow2 image file reopen
block: qed image file reopen
block: raw image file reopen
block: raw-posix image file reopen
block: purge s->aligned_buf and s->aligned_buf_size from raw-posix.c
block: use BDRV_O_NOCACHE instead of s->aligned_buf in raw-posix.c
block: do not parse BDRV_O_CACHE_WB in block drivers
block: move open flag parsing in raw block drivers to helper functions
block: move aio initialization into a helper function
block: Framework for reopening files safely
block: make bdrv_set_enable_write_cache() modify open_flags
block: correctly set the keep_read_only flag
blockdev: preserve readonly and snapshot states across media changes
|
|
There is currently nothing that needs to be done for VPC image
file reopen.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
There is currently nothing that needs to be done for VDI reopen.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
