aboutsummaryrefslogtreecommitdiff
path: root/block
AgeCommit message (Collapse)AuthorFilesLines
2016-08-03block: Cater to iscsi with non-power-of-2 discardEric Blake1-6/+9
Dell Equallogic iSCSI SANs have a very unusual advertised geometry: $ iscsi-inq -e 1 -c $((0xb0)) iscsi://XXX/0 wsnz:0 maximum compare and write length:1 optimal transfer length granularity:0 maximum transfer length:0 optimal transfer length:0 maximum prefetch xdread xdwrite transfer length:0 maximum unmap lba count:30720 maximum unmap block descriptor count:2 optimal unmap granularity:30720 ugavalid:1 unmap granularity alignment:0 maximum write same length:30720 which says that both the maximum and the optimal discard size is 15M. It is not immediately apparent if the device allows discard requests not aligned to the optimal size, nor if it allows discards at a finer granularity than the optimal size. I tried to find details in the SCSI Commands Reference Manual Rev. A on what valid values of maximum and optimal sizes are permitted, but while that document mentions a "Block Limits VPD Page", I couldn't actually find documentation of that page or what values it would have, or if a SCSI device has an advertisement of its minimal unmap granularity. So it is not obvious to me whether the Dell Equallogic device is compliance with the SCSI specification. Fortunately, it is easy enough to support non-power-of-2 sizing, even if it means we are less efficient than truly possible when targetting that device (for example, it means that we refuse to unmap anything that is not a multiple of 15M and aligned to a 15M boundary, even if the device truly does support a smaller granularity where unmapping actually works). Reported-by: Peter Lieven <pl@kamp.de> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1469129688-22848-5-git-send-email-eblake@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-03nbd: Limit nbdflags to 16 bitsEric Blake1-1/+1
Rather than asserting that nbdflags is within range, just give it the correct type to begin with :) nbdflags corresponds to the per-export portion of NBD Protocol "transmission flags", which is 16 bits in response to NBD_OPT_EXPORT_NAME and NBD_OPT_GO. Furthermore, upstream NBD has never passed the global flags to the kernel via ioctl(NBD_SET_FLAGS) (the ioctl was first introduced in NBD 2.9.22; then a latent bug in NBD 3.1 actually tried to OR the global flags with the transmission flags, with the disaster that the addition of NBD_FLAG_NO_ZEROES in 3.9 caused all earlier NBD 3.x clients to treat every export as read-only; NBD 3.10 and later intentionally clip things to 16 bits to pass only transmission flags). Qemu should follow suit, since the current two global flags (NBD_FLAG_FIXED_NEWSTYLE and NBD_FLAG_NO_ZEROES) have no impact on the kernel's behavior during transmission. CC: qemu-stable@nongnu.org Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1469129688-22848-3-git-send-email-eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-27Merge remote-tracking branch 'remotes/cody/tags/block-pull-request' into stagingPeter Maydell1-2/+8
# gpg: Signature made Tue 26 Jul 2016 21:51:38 BST # gpg: using RSA key 0xBDBE7B27C0DE3057 # gpg: Good signature from "Jeffrey Cody <jcody@redhat.com>" # gpg: aka "Jeffrey Cody <jeff@codyprime.org>" # gpg: aka "Jeffrey Cody <codyprime@gmail.com>" # Primary key fingerprint: 9957 4B4D 3474 90E7 9D98 D624 BDBE 7B27 C0DE 3057 * remotes/cody/tags/block-pull-request: mirror: double performance of the bulk stage if the disc is full block/gluster: fix doc in the qapi schema and member name Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-26mirror: double performance of the bulk stage if the disc is fullVladimir Sementsov-Ogievskiy1-2/+8
Mirror can do up to 16 in-flight requests, but actually on full copy (the whole source disk is non-zero) in-flight is always 1. This happens as the request is not limited in size: the data occupies maximum available capacity of s->buf. The patch limits the size of the request to some artificial constant (1 Mb here), which is not that big or small. This effectively enables back parallelism in mirror code as it was designed. The result is important: the time to migrate 10 Gb disk is reduced from ~350 sec to 170 sec. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-id: 1468516741-82174-1-git-send-email-vsementsov@virtuozzo.com CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Fam Zheng <famz@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> CC: Max Reitz <mreitz@redhat.com> CC: Jeff Cody <jcody@redhat.com> CC: Eric Blake <eblake@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-07-26block: export LUKS specific data to qemu-img infoDaniel P. Berrange1-0/+49
The qemu-img info command has the ability to expose format specific metadata about volumes. Wire up this facility for the LUKS driver to report on cipher configuration and key slot usage. $ qemu-img info ~/VirtualMachines/demo.luks image: /home/berrange/VirtualMachines/demo.luks file format: luks virtual size: 98M (102760448 bytes) disk size: 100M encrypted: yes Format specific information: ivgen alg: plain64 hash alg: sha1 cipher alg: aes-128 uuid: 6ddee74b-3a22-408c-8909-6789d4fa2594 cipher mode: xts slots: [0]: active: true iters: 572706 key offset: 4096 stripes: 4000 [1]: active: false key offset: 135168 [2]: active: false key offset: 266240 [3]: active: false key offset: 397312 [4]: active: false key offset: 528384 [5]: active: false key offset: 659456 [6]: active: false key offset: 790528 [7]: active: false key offset: 921600 payload offset: 2097152 master key iters: 142375 One somewhat undesirable artifact is that the data fields are printed out in (apparently) random order. This will be addressed later by changing the way the block layer pretty-prints the image specific data. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1469192015-16487-3-git-send-email-berrange@redhat.com Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-07-26qcow2: do not allocate extra memoryVladimir Sementsov-Ogievskiy2-2/+2
There are no needs to allocate more than one cluster, as we set avail_out for deflate to one cluster. Zlib docs (http://www.zlib.net/manual.html) says: "deflate compresses as much data as possible, and stops when the input buffer becomes empty or the output buffer becomes full." So, deflate will not write more than avail_out to output buffer. If there is not enough space in output buffer for compressed data (it may be larger than input data) deflate just returns Z_OK. (if all data is compressed and written to output buffer deflate returns Z_STREAM_END). Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 1468515565-81313-1-git-send-email-vsementsov@virtuozzo.com Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-07-21Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell1-9/+0
pc, pci, virtio: new features, cleanups, fixes - interrupt remapping for intel iommus - a bunch of virtio cleanups - fixes all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Thu 21 Jul 2016 18:49:30 BST # gpg: using RSA key 0x281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (57 commits) intel_iommu: avoid unnamed fields virtio: Update migration docs virtio-gpu: Wrap in vmstate virtio-gpu: Use migrate_add_blocker for virgl migration blocking virtio-input: Wrap in vmstate 9pfs: Wrap in vmstate virtio-serial: Wrap in vmstate virtio-net: Wrap in vmstate virtio-balloon: Wrap in vmstate virtio-rng: Wrap in vmstate virtio-blk: Wrap in vmstate virtio-scsi: Wrap in vmstate virtio: Migration helper function and macro virtio-serial: Remove old migration version support virtio-net: Remove old migration version support virtio-scsi: Replace HandleOutput typedef Revert "mirror: Workaround for unexpected iohandler events during completion" virtio-scsi: Call virtio_add_queue_aio virtio-blk: Call virtio_add_queue_aio virtio: Introduce virtio_add_queue_aio ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-21Revert "mirror: Workaround for unexpected iohandler events during completion"Fam Zheng1-9/+0
This reverts commit ab27c3b5e7408693dde0b565f050aa55c4a1bcef. The virtio storage device host notifiers now work with bdrv_drained_begin/end, so we don't need this hack any more. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-21Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell17-319/+319
staging Pull request v2: * Resolved merge conflict with block/iscsi.c [Peter] # gpg: Signature made Wed 20 Jul 2016 17:20:52 BST # gpg: using RSA key 0x9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/block-pull-request: (25 commits) raw_bsd: Convert to byte-based interface nbd: Convert to byte-based interface block: Kill .bdrv_co_discard() sheepdog: Switch .bdrv_co_discard() to byte-based raw_bsd: Switch .bdrv_co_discard() to byte-based qcow2: Switch .bdrv_co_discard() to byte-based nbd: Switch .bdrv_co_discard() to byte-based iscsi: Switch .bdrv_co_discard() to byte-based gluster: Switch .bdrv_co_discard() to byte-based blkreplay: Switch .bdrv_co_discard() to byte-based block: Add .bdrv_co_pdiscard() driver callback block: Convert .bdrv_aio_discard() to byte-based rbd: Switch rbd_start_aio() to byte-based raw-posix: Switch paio_submit() to byte-based block: Convert BB interface to byte-based discards block: Convert bdrv_aio_discard() to byte-based block: Switch BlockRequest to byte-based block: Convert bdrv_discard() to byte-based block: Convert bdrv_co_discard() to byte-based iscsi: Rely on block layer to break up large requests ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Conflicts: block/gluster.c
2016-07-20raw_bsd: Convert to byte-based interfaceEric Blake1-19/+26
Since the raw format driver is just passing things through, we can do byte-based read and write if the underlying protocol does likewise. There's one tricky part - if we probed the image format, we document that we restrict operations on the initial sector. It's easiest to keep this guarantee by enforcing read-modify-write on sub-sector operations (yes, this partially reverts commit ad82be2f). Signed-off-by: Eric Blake <eblake@redhat.com> Message-id: 1468624988-423-20-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-20nbd: Convert to byte-based interfaceEric Blake3-23/+27
The NBD protocol doesn't have any notion of sectors, so it is a fairly easy conversion to use byte-based read and write. Signed-off-by: Eric Blake <eblake@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1468624988-423-19-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-20block: Kill .bdrv_co_discard()Eric Blake1-7/+2
Now that all drivers have a byte-based .bdrv_co_pdiscard(), we no longer need to worry about the sector-based version. We can also relax our minimum alignment to 1 for drivers that support it. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1468624988-423-18-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-20sheepdog: Switch .bdrv_co_discard() to byte-basedEric Blake1-7/+10
Another step towards killing off sector-based block APIs. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1468624988-423-17-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-20raw_bsd: Switch .bdrv_co_discard() to byte-basedEric Blake1-5/+4
Another step towards killing off sector-based block APIs. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1468624988-423-16-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-20qcow2: Switch .bdrv_co_discard() to byte-basedEric Blake1-5/+5
Another step towards killing off sector-based block APIs. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1468624988-423-15-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-20nbd: Switch .bdrv_co_discard() to byte-basedEric Blake3-16/+10
Another step towards killing off sector-based block APIs. While at it, call directly into nbd-client.c instead of having a pointless trivial wrapper in nbd.c. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1468624988-423-14-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-20iscsi: Switch .bdrv_co_discard() to byte-basedEric Blake1-10/+8
Another step towards killing off sector-based block APIs. Unlike write_zeroes, where we can be handed unaligned requests and must fail gracefully with -ENOTSUP for a fallback, we are guaranteed that discard requests are always aligned because the block layer already ignored unaligned head/tail. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1468624988-423-13-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-20gluster: Switch .bdrv_co_discard() to byte-basedEric Blake1-8/+6
Another step towards killing off sector-based block APIs. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1468624988-423-12-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-20blkreplay: Switch .bdrv_co_discard() to byte-basedEric Blake1-5/+4
Another step towards killing off sector-based block APIs. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1468624988-423-11-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-20block: Add .bdrv_co_pdiscard() driver callbackEric Blake1-2/+5
There's enough drivers with a sector-based callback that it will be easier to switch one at a time. This patch adds a byte-based callback, and then after all drivers are swapped, we'll drop the sector-based callback. [checkpatch doesn't like the space after coroutine_fn in block_int.h, but it's consistent with the rest of the file] Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1468624988-423-10-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-20block: Convert .bdrv_aio_discard() to byte-basedEric Blake3-22/+18
Another step towards byte-based interfaces everywhere. Replace the sector-based driver callback .bdrv_aio_discard() with a new byte-based .bdrv_aio_pdiscard(). Only raw-posix and RBD drivers are affected, so it was not worth splitting into multiple patches. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1468624988-423-9-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-20rbd: Switch rbd_start_aio() to byte-basedEric Blake1-9/+9
The internal function converts to byte-based before calling into RBD code; hoist the conversion to the callers so that callers can then be switched to byte-based themselves. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1468624988-423-8-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-20raw-posix: Switch paio_submit() to byte-basedEric Blake3-15/+20
The only remaining uses of paio_submit() were flush (with no offset or count) and discard (which we are switching to byte-based); furthermore, the similarly named paio_submit_co() is already byte-based. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1468624988-423-7-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-20block: Convert BB interface to byte-based discardsEric Blake2-16/+14
Change sector-based blk_discard(), blk_co_discard(), and blk_aio_discard() to instead be byte-based blk_pdiscard(), blk_co_pdiscard(), and blk_aio_pdiscard(). NBD gets a lot simpler now that ignoring the unaligned portion of a byte-based discard request is handled under the hood by the block layer. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1468624988-423-6-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-20block: Convert bdrv_aio_discard() to byte-basedEric Blake3-10/+10
Another step towards byte-based interfaces everywhere. Replace the sector-based bdrv_aio_discard() with a new byte-based bdrv_aio_pdiscard(), which silently ignores any unaligned head or tail. Driver callbacks will be converted in followup patches. Signed-off-by: Eric Blake <eblake@redhat.com> Message-id: 1468624988-423-5-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-20block: Switch BlockRequest to byte-basedEric Blake1-32/+30
BlockRequest is the internal struct used by bdrv_aio_*. At the moment, all such calls were sector-based, but we will eventually convert to byte-based; start by changing the internal variables to be byte-based. No change to behavior, although the read and write code can now go byte-based through more of the stack. Signed-off-by: Eric Blake <eblake@redhat.com> Message-id: 1468624988-423-4-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-20block: Convert bdrv_discard() to byte-basedEric Blake3-14/+12
Another step towards byte-based interfaces everywhere. Replace the sector-based bdrv_discard() with a new byte-based bdrv_pdiscard(), which silently ignores any unaligned head or tail. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1468624988-423-3-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-20block: Convert bdrv_co_discard() to byte-basedEric Blake4-35/+41
Another step towards byte-based interfaces everywhere. Replace the sector-based bdrv_co_discard() with a new byte-based bdrv_co_pdiscard(), which silently ignores any unaligned head or tail. Driver callbacks will be converted in followup patches. By calculating the alignment outside of the loop, and clamping the max discard to an aligned value, we can simplify the actions done within the loop. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1468624988-423-2-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-20iscsi: Rely on block layer to break up large requestsEric Blake1-10/+4
Now that the block layer honors max_request, we don't need to bother with an EINVAL on overlarge requests, but can instead assert that requests are well-behaved. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1468607524-19021-7-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-20nbd: Drop unused offset parameterEric Blake1-15/+16
Now that NBD relies on the block layer to fragment things, we no longer need to track an offset argument for which fragment of a request we are actually servicing. While at it, use true and false instead of 0 and 1 for a bool parameter. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1468607524-19021-6-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-20nbd: Rely on block layer to break up large requestsEric Blake2-52/+11
Now that the block layer will honor max_transfer, we can simplify our code to rely on that guarantee. The readv code can call directly into nbd-client, just as the writev code has done since commit 52a4650. Interestingly enough, while qemu-io 'w 0 40m' splits into a 32M and 8M transaction, 'w -z 0 40m' splits into two 16M and an 8M, because the block layer caps the bounce buffer for writing zeroes at 16M. When we later introduce support for NBD_CMD_WRITE_ZEROES, we can get a full 32M zero write (or larger, if the client and server negotiate that write zeroes can use a larger size than ordinary writes). Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1468607524-19021-5-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-20block: Fragment writes to max transfer lengthEric Blake1-2/+33
Drivers should be able to rely on the block layer honoring the max transfer length, rather than needing to return -EINVAL (iscsi) or manually fragment things (nbd). We already fragment write zeroes at the block layer; this patch adds the fragmentation for normal writes, after requests have been aligned (fragmenting before alignment would lead to multiple unaligned requests, rather than just the head and tail). When fragmenting a large request where FUA was requested, but where we know that FUA is implemented by flushing all requests rather than the given request, then we can still get by with only one flush. Note, however, that we need a followup patch to the raw format driver to avoid a regression in the number of flushes actually issued. The return value was previously nebulous on success (sometimes zero, sometimes the length written); since we never have a short write, and since fragmenting may store yet another positive value in 'ret', change the function to always return 0 on success, matching what we do in bdrv_aligned_preadv(). Signed-off-by: Eric Blake <eblake@redhat.com> Message-id: 1468607524-19021-4-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-20raw_bsd: Don't advertise flags not supported by protocol layerEric Blake1-2/+4
The raw format layer supports all flags via passthrough - but it only makes sense to pass through flags that the lower layer actually supports. The next patch gives stronger reasoning for why this is correct. At the moment, the raw format layer ignores the max_transfer limit of its protocol layer, and an attempt to do the qemu-io 'w -f 0 40m' to an NBD server that lacks FUA will pass the entire 40m request to the NBD driver, which then fragments the request itself into a 32m write, 8m write, and flush. But once the block layer starts honoring limits and fragmenting packets, the raw driver will hand the NBD driver two separate requests; if both requests have BDRV_REQ_FUA set, then this would result in a 32m write, flush, 8m write, and second flush. By having the raw layer no longer advertise FUA support when the protocol layer lacks it, we are back to a single flush at the block layer for the overall 40m request. Note that 'w -f -z 0 40m' does not currently exhibit the same problem, because there, the fragmentation does not occur until at the NBD layer (the raw layer has .bdrv_co_pwrite_zeroes, and the NBD layer doesn't advertise max_pwrite_zeroes to constrain things at the raw layer) - but the problem is latent and we would again have too many flushes without this patch once the NBD layer implements support for the new NBD_CMD_WRITE_ZEROES command, if it sets max_pwrite_zeroes to the same 32m limit as recommended by the NBD protocol. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1468607524-19021-3-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-20block: Fragment reads to max transfer lengthEric Blake1-20/+33
Drivers should be able to rely on the block layer honoring the max transfer length, rather than needing to return -EINVAL (iscsi) or manually fragment things (nbd). This patch adds the fragmentation in the block layer, after requests have been aligned (fragmenting before alignment would lead to multiple unaligned requests, rather than just the head and tail). The return value was previously nebulous on success on whether it was zero or the length read; and fragmenting may introduce yet other non-zero values if we use the last length read. But as at least some callers are sloppy and expect only zero on success, it is easiest to just guarantee 0. [Fix uninitialized ret local variable in bdrv_aligned_preadv(). --Stefan] Signed-off-by: Eric Blake <eblake@redhat.com> Message-id: 1468607524-19021-2-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-19block/gluster: add support for multiple gluster serversPrasanna Kumar Kalever1-40/+357
This patch adds a way to specify multiple volfile servers to the gluster block backend of QEMU with tcp|rdma transport types and their port numbers. Problem: Currently VM Image on gluster volume is specified like this: file=gluster[+tcp]://host[:port]/testvol/a.img Say we have three hosts in a trusted pool with replica 3 volume in action. When the host mentioned in the command above goes down for some reason, the other two hosts are still available. But there's currently no way to tell QEMU about them. Solution: New way of specifying VM Image on gluster volume with volfile servers: (We still support old syntax to maintain backward compatibility) Basic command line syntax looks like: Pattern I: -drive driver=gluster, volume=testvol,path=/path/a.raw,[debug=N,] server.0.type=tcp, server.0.host=1.2.3.4, server.0.port=24007, server.1.type=unix, server.1.socket=/path/socketfile Pattern II: 'json:{"driver":"qcow2","file":{"driver":"gluster", "volume":"testvol","path":"/path/a.qcow2",["debug":N,] "server":[{hostinfo_1}, ...{hostinfo_N}]}}' driver => 'gluster' (protocol name) volume => name of gluster volume where our VM image resides path => absolute path of image in gluster volume [debug] => libgfapi loglevel [(0 - 9) default 4 -> Error] {hostinfo} => {{type:"tcp",host:"1.2.3.4"[,port=24007]}, {type:"unix",socket:"/path/sockfile"}} type => transport type used to connect to gluster management daemon, it can be tcp|unix host => host address (hostname/ipv4/ipv6 addresses/socket path) port => port number on which glusterd is listening. socket => path to socket file Examples: 1. -drive driver=qcow2,file.driver=gluster, file.volume=testvol,file.path=/path/a.qcow2,file.debug=9, file.server.0.type=tcp, file.server.0.host=1.2.3.4, file.server.0.port=24007, file.server.1.type=unix, file.server.1.socket=/var/run/glusterd.socket 2. 'json:{"driver":"qcow2","file":{"driver":"gluster","volume":"testvol", "path":"/path/a.qcow2","debug":9,"server": [{"type":"tcp","host":"1.2.3.4","port":"24007"}, {"type":"unix","socket":"/var/run/glusterd.socket"} ]}}' This patch gives a mechanism to provide all the server addresses, which are in replica set, so in case host1 is down VM can still boot from any of the active hosts. This is equivalent to the backup-volfile-servers option supported by mount.glusterfs (FUSE way of mounting gluster volume) credits: sincere thanks to all the supporters Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 1468947453-5433-6-git-send-email-prasanna.kalever@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-07-19block/gluster: using new qapi schemaPrasanna Kumar Kalever1-50/+59
this patch adds 'GlusterServer' related schema in qapi/block-core.json [Jeff: minor fix-ups of comments and formatting, per patch reviews] Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1468947453-5433-5-git-send-email-prasanna.kalever@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-07-19block/gluster: deprecate rdma supportPrasanna Kumar Kalever1-8/+12
gluster volfile server fetch happens through unix and/or tcp, it doesn't support volfile fetch over rdma. The rdma code may actually mislead, so to make sure things do not break, for now we fallback to tcp when requested for rdma, with a warning. If you are wondering how this worked all these days, its the gluster libgfapi code which handles anything other than unix transport as socket/tcp, sad but true. Also gluster doesn't support ipv6 addresses, removing the ipv6 related comments/docs section [Jeff: Minor grammatical fixes in comments and commit message, per review comments] Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-id: 1468947453-5433-4-git-send-email-prasanna.kalever@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-07-19block/gluster: code cleanupPrasanna Kumar Kalever1-68/+75
unified coding styles of multiline function arguments and other error functions moved random declarations of structures and other list variables Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-id: 1468947453-5433-3-git-send-email-prasanna.kalever@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-07-19block/gluster: rename [server, volname, image] -> [host, volume, path]Prasanna Kumar Kalever1-27/+27
A future patch will add support for multiple gluster servers. Existing terminology is a bit unusual in relation to what names are used by other networked devices, and doesn't map very well to the terminology we expect to use for multiple servers. Therefore, rename the following options: 'server' -> 'host' 'image' -> 'path' 'volname' -> 'volume' Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-id: 1468947453-5433-2-git-send-email-prasanna.kalever@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-07-19mirror: fix request throttling in drive-mirrorDenis V. Lunev1-1/+6
There are 2 deficiencies here: - mirror_iteration could start several requests inside. Thus we could simply have more in_flight requests than MAX_IN_FLIGHT. - keeping this in mind throttling in mirror_run which is checking s->in_flight == MAX_IN_FLIGHT is wrong. The patch adds the check and throttling into mirror_iteration and fixes the check in mirror_run() to be sure. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1466598927-5990-1-git-send-email-den@openvz.org CC: Jeff Cody <jcody@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> CC: Max Reitz <mreitz@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> (cherry picked from commit e648dc95c28fbca12e67be26a1fc4b9a0676c3fe)
2016-07-19mirror: improve performance of mirroring of empty diskDenis V. Lunev1-5/+11
We should not take into account zero blocks for delay calculations. They are not read and thus IO throttling is not required. In the other case VM migration with 16 Tb QCOW2 disk with 4 Gb of data takes days. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 1468503209-19498-9-git-send-email-den@openvz.org CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> CC: Max Reitz <mreitz@redhat.com> CC: Jeff Cody <jcody@redhat.com> CC: Eric Blake <eblake@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-07-19mirror: efficiently zero out targetDenis V. Lunev1-2/+26
With a bdrv_co_write_zeroes method on a target BDS and when this method is working as indicated by the bdrv_can_write_zeroes_with_unmap(), zeroes will not be placed into the wire. Thus the target could be very efficiently zeroed out. This should be done with the largest chunk possible. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Vladimir Sementsov-Ogievskiy<vsementsov@virtuozzo.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 1468503209-19498-8-git-send-email-den@openvz.org CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> CC: Max Reitz <mreitz@redhat.com> CC: Jeff Cody <jcody@redhat.com> CC: Eric Blake <eblake@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-07-19mirror: optimize dirty bitmap filling in mirror_run a bitDenis V. Lunev1-2/+6
There is no need to scan allocation tables if we have mark_all_dirty flag set. Just mark it all dirty. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Vladimir Sementsov-Ogievskiy<vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 1468503209-19498-7-git-send-email-den@openvz.org CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> CC: Max Reitz <mreitz@redhat.com> CC: Jeff Cody <jcody@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-07-19mirror: create mirror_dirty_init helper for mirror_runDenis V. Lunev1-29/+41
The code inside the helper will be extended in the next patch. mirror_run itself is overbloated at the moment. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Vladimir Sementsov-Ogievskiy<vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 1468503209-19498-5-git-send-email-den@openvz.org CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> CC: Max Reitz <mreitz@redhat.com> CC: Jeff Cody <jcody@redhat.com> CC: Eric Blake <eblake@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-07-19mirror: create mirror_throttle helperDenis V. Lunev1-12/+19
The patch also places last_pause_ns from stack in mirror_run into MirrorBlockJob structure. This helper will be useful in next patches. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1468503209-19498-4-git-send-email-den@openvz.org CC: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> CC: Eric Blake <eblake@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Fam Zheng <famz@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> CC: Max Reitz <mreitz@redhat.com> CC: Jeff Cody <jcody@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-07-19mirror: make sectors_in_flight int64_tDenis V. Lunev1-1/+1
We keep here the sum of int fields. Thus this could easily overflow, especially when we will start sending big requests in next patches. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 1468503209-19498-3-git-send-email-den@openvz.org CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> CC: Max Reitz <mreitz@redhat.com> CC: Jeff Cody <jcody@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-07-19dirty-bitmap: operate with int64_t amountDenis V. Lunev1-3/+3
Underlying HBitmap operates even with uint64_t. Thus this change is safe. This would be useful f.e. to mark entire bitmap dirty in one call. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 1468503209-19498-2-git-send-email-den@openvz.org CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> CC: Max Reitz <mreitz@redhat.com> CC: Jeff Cody <jcody@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-07-19Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-56/+192
* two old patches from prospective GSoC students * i386 -kernel device tree support * Coverity fix * memory usage improvement from Peter * checkpatch fix * g_path_get_dirname cleanup * caching of block status for iSCSI # gpg: Signature made Tue 19 Jul 2016 07:43:41 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: target-i386: Remove redundant HF_SOFTMMU_MASK block/iscsi: allow caching of the allocation map block/iscsi: fix rounding in iscsi_allocationmap_set Move README to markdown cpu-exec: Move down some declarations in cpu_exec() exec: avoid realloc in phys_map_node_reserve checkpatch: consider git extended headers valid patches megasas: remove useless check for cmd->frame compiler: never omit assertions if using a static analysis tool hw/i386: add device tree support Changed malloc to g_malloc, free to g_free in bsd-user/qemu.h use g_path_get_dirname instead of dirname Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-19Merge remote-tracking branch 'remotes/jnsnow/tags/ide-pull-request' into stagingPeter Maydell1-0/+21
# gpg: Signature made Mon 18 Jul 2016 23:53:15 BST # gpg: using RSA key 0x7DEF8106AAFC390E # gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" # Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB # Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E * remotes/jnsnow/tags/ide-pull-request: block: ignore flush requests when storage is clean tests: in IDE and AHCI tests perform DMA write before flushing ide: set retry_unit for PIO and FLUSH requests ide: refactor retry_unit set and clear into separate function Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-19block/iscsi: allow caching of the allocation mapPeter Lieven1-58/+192
until now the allocation map was used only as a hint if a cluster is allocated or not. If a block was not allocated (or Qemu had no info about the allocation status) a get_block_status call was issued to check the allocation status and possibly avoid a subsequent read of unallocated sectors. If a block known to be allocated the get_block_status call was omitted. In the other case a get_block_status call was issued before every read to avoid the necessity for a consistent allocation map. To avoid the potential overhead of calling get_block_status for each and every read request this took only place for the bigger requests. This patch enhances this mechanism to cache the allocation status and avoid calling get_block_status for blocks where the allocation status has been queried before. This allows for bypassing the read request even for smaller requests and additionally omits calling get_block_status for known to be unallocated blocks. Signed-off-by: Peter Lieven <pl@kamp.de> Message-Id: <1468831940-15556-3-git-send-email-pl@kamp.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2024-11-19 00:27:59 +0000