aboutsummaryrefslogtreecommitdiff
path: root/block
AgeCommit message (Collapse)AuthorFilesLines
2013-03-04sheepdog: add support for connecting to unix domain socketMORITA Kazutaka1-12/+70
This patch adds support for a unix domain socket for a connection between qemu and local sheepdog server. You can use the unix domain socket with the following syntax: $ qemu sheepdog+unix:///<vdiname>?socket=<socket path>[#snapid] Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-04sheepdog: use inet_connect to simplify connect codeMORITA Kazutaka1-81/+30
This uses the form "<host>:<port>" for the representation of the sheepdog server to use inet_connect. Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-04sheepdog: accept URIsMORITA Kazutaka1-34/+105
The URI syntax is consistent with the NBD and Gluster syntax. The syntax is sheepdog[+tcp]://[host:port]/vdiname[#snapid|#tag] Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-04move socket_set_nodelay to osdep.cMORITA Kazutaka1-10/+1
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-22qcow2: support compressed clusters in BlockFragInfoStefan Hajnoczi1-0/+1
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-22qcow2: record fragmentation statistics during checkStefan Hajnoczi1-1/+24
The qemu-img check command can display fragmentation statistics: * Total number of clusters in virtual disk * Number of allocated clusters * Number of fragmented clusters This patch adds fragmentation statistics support to qcow2. Compressed and normal clusters count as allocated. Zero clusters are not counted as allocated unless their L2 entry has a non-zero offset (e.g. preallocation). Only the current L1 table counts towards the statistics - snapshots are ignored. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-22qcow2: introduce check_refcounts_l1/l2() flagsStefan Hajnoczi1-6/+12
The check_refcounts_l1/l2() functions have a check_copied argument to check that the QCOW_O_COPIED flag is consistent with refcount == 1. This should be a bool, not an int. However, the next patch introduces qcow2 fragmentation statistics and also needs to pass an option to check_refcounts_l1/l2(). This is a good opportunity to use an int flags field. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-22qemu-img: find the image end offset during checkFederico Simoncelli1-2/+8
This patch adds the support for reporting the image end offset (in bytes). This is particularly useful after a conversion (or a rebase) where the destination is a block device in order to find the first unused byte at the end of the image. Signed-off-by: Federico Simoncelli <fsimonce@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-02-13block/curl: only restrict protocols with libcurl>=7.19.4Stefan Hajnoczi1-0/+4
The curl_easy_setopt(state->curl, CURLOPT_PROTOCOLS, ...) interface was introduced in libcurl 7.19.4. Therefore we cannot protect against CVE-2013-0249 when linking against an older libcurl. This fixes the build failure introduced by fb6d1bbd246c7a57ef53d3847ef225cd1349d602. Reported-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Tested-by: Andreas Färber <andreas.faeber@web.de> Message-id: 1360743934-8337-1-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-12Revert "block/vpc: Fix size calculation"Stefan Hajnoczi1-9/+5
This reverts commit f880defbb06708d30a38ce9f2667067626acdd38. Jeff Cody's testing revealed that the interpretation of size differs even between VirtualPC and HyperV. Revert this so there is time to consider the impact of any backwards incompatible behavior this change creates. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-12block/raw-posix: detect readonly Linux block devices using BLKROGETStefan Hajnoczi1-1/+48
Linux block devices can be set read-only with "blockdev --setro <device>". The same thing can be done for LVM volumes using "lvchange --permission r <volume>". This read-only setting is independent of device node permissions. Therefore the device can still be opened O_RDWR but actual writes will fail. This results in odd behavior for QEMU. bdrv_open() is supposed to fail if a read-only image is being opened with BDRV_O_RDWR. By not failing for Linux block devices, the guest boots up but every write produces an I/O error. This patch checks whether the block device is read-only so that Linux block devices behave like regular files. Reported-by: Sibiao Luo <sluo@redhat.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-02-11block/vpc: Fix size calculationStefan Weil1-5/+9
The size calculated from the CHS values is not the real image (disk) size, but usually a smaller value. This is caused by rounding effects. Only older operating systems use CHS. Such guests won't be able to use the whole disk. All modern operating systems use the real size. This patch fixes https://bugs.launchpad.net/qemu/+bug/1105670/. Signed-off-by: Stefan Weil <sw@weilnetz.de> Message-id: 1360265212-22037-1-git-send-email-sw@weilnetz.de Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-11error: Strip trailing '\n' from error string arguments (again)Markus Armbruster1-1/+1
Commit 6daf194d and be62a2eb got rid of a bunch, but they keep coming back. Tracked down with this Coccinelle semantic patch: @r@ expression err, eno, cls, fmt; position p; @@ ( error_report(fmt, ...)@p | error_set(err, cls, fmt, ...)@p | error_set_errno(err, eno, cls, fmt, ...)@p | error_setg(err, fmt, ...)@p | error_setg_errno(err, eno, fmt, ...)@p ) @script:python@ fmt << r.fmt; p << r.p; @@ if "\\n" in str(fmt): print "%s:%s:%s:%s" % (p[0].file, p[0].line, p[0].column, fmt) Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-id: 1360354939-10994-4-git-send-email-armbru@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-08block/curl: disable extra protocols to prevent CVE-2013-0249Stefan Hajnoczi1-0/+11
There is a buffer overflow in libcurl POP3/SMTP/IMAP. The workaround is simple: disable extra protocols so that they cannot be exploited. Full details here: http://curl.haxx.se/docs/adv_20130206.html QEMU only cares about HTTP, HTTPS, FTP, FTPS, and TFTP. I have tested that this fix prevents the exploit on my host with libcurl-7.27.0-5.fc18. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01block/raw-posix: Build fix for O_ASYNCAndreas Färber1-1/+10
Commit eeb6b45d48800e96f67ef2a5c80332557fd45ddb (block: raw-posix image file reopen) broke the build on OpenIndiana. illumos has no O_ASYNC. Exclude it from flags to be compared and instead assert that it is not set where defined. Cf. e61ab1da7e98357da47c54d8f893b9bd6ff2f7f9 for qemu-ga. Cc: qemu-stable@nongnu.org (1.3.x) Cc: Jeff Cody <jcody@redhat.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <andreas.faerber@web.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-01vmdk: Allow space in file namePhilipp Hahn1-9/+1
The previous scanf() format string stopped parsing the file name on the first white white space, which seems to be allowed at least by VMware Workstation. Change the format string to collect everything between the first and second quote as the file name, disallowing line breaks. Signed-off-by: Philipp Hahn <hahn@univention.de> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-01parallels: Fix bdrv_open() error handlingKevin Wolf1-8/+15
Return -errno instead of -1 on errors. Hey, no memory leak to fix here while we're touching it! Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-01dmg: Use g_free instead of freeKevin Wolf1-9/+9
The buffers are allocated with g_(re)alloc, so use g_free to free them. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-01dmg: Fix bdrv_open() error handlingKevin Wolf1-38/+97
Return -errno instead of -1 on errors and add error checks in some places that didn't have one. Passing things by reference requires more correct typing, replaced a few off_ts therefore - with a 32-bit off_t this is even a fix for truncation bugs. While touching the code, fix even some more memory leaks than in the other drivers... Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-01vpc: Fix bdrv_open() error handlingKevin Wolf1-12/+30
Return -errno instead of -1 on errors. While touching the code, fix a memory leak. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-01cloop: Fix bdrv_open() error handlingKevin Wolf1-10/+19
Return -errno instead of -1 on errors. While touching the code, fix a memory leak. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-01bochs: Fix bdrv_open() error handlingKevin Wolf1-7/+15
Return -errno instead of -1 on errors. While touching the code, fix a memory leak. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-01sheepdog: pass vdi_id to sheep daemon for sd_close()Liu Yuan1-2/+3
Sheep daemon needs vdi_id to identify which vdi is closed to release resources such as object cache. Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Liu Yuan <tailai.ly@taobao.com> Reviewed-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-01vmdk: Allow selecting SCSI adapter in image creationOthmar Pasteka1-3/+28
Introduce a new option "adapter_type" when converting to vmdk images. It can be one of the following: ide (default), buslogic, lsilogic or legacyESX (according to the vmdk spec from vmware). In case of a non-ide adapter, heads is set to 255 instead of the 16. The latter is used for "ide". Also see LP#545089 Signed-off-by: Othmar Pasteka <pasteka@kabsi.at> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-30g_malloc(0) and g_malloc0(0) return NULL; simplifyMarkus Armbruster2-8/+2
Once upon a time, it was decided that qemu_malloc(0) should abort. Switching to glib retired that bright idea. Some code that was added to cope with it (e.g. in commits 702ef63, b76b6e9) is still around. Bury it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-25mirror: do nothing on zero-sized diskPaolo Bonzini1-1/+1
On a zero-sized disk we need to break out of the job successfully before bdrv_dirty_iter_init is called, otherwise you will get an assertion failure with the next patch. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-25block/vdi: Check for bad signatureStefan Weil1-1/+5
vdi_open did not check for a bad signature. This check was only in vdi_probe. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-25block/vdi: Improved return values from vdi_openStefan Weil1-3/+14
vdi_open returned -1 in case of any error, but it should return an error code (negative value of errno or -EMEDIUMTYPE). Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-25block/vdi: Improve debug output for signatureStefan Weil1-1/+1
The signature is a 32 bit value and needs up to 8 hex digits for printing. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-25block: Use error code EMEDIUMTYPE for wrong format in some block driversStefan Weil6-7/+7
This improves error reports for bochs, cow, qcow, qcow2, qed and vmdk when a file with the wrong format is selected. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-25mirror: support arbitrarily-sized iterationsPaolo Bonzini1-30/+67
Yet another optimization is to extend the mirroring iteration to include more adjacent dirty blocks. This limits the number of I/O operations and makes mirroring efficient even with a small granularity. Most of the infrastructure is already in place; we only need to put a loop around the computation of the origin and sector count of the iteration. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-25mirror: support more than one in-flight AIO operationPaolo Bonzini1-11/+91
With AIO support in place, we can start copying more than one chunk in parallel. This patch introduces the required infrastructure for this: the buffer is split into multiple granularity-sized chunks, and there is a free list to access them. Because of copy-on-write, a single operation may already require multiple chunks to be available on the free list. In addition, two different iterations on the HBitmap may want to copy the same cluster. We avoid this by keeping a bitmap of in-flight I/O operations, and blocking until the previous iteration completes. This should be a pretty rare occurrence, though; as long as there is no overlap the next iteration can start before the previous one finishes. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-25mirror: add buf-size argument to drive-mirrorPaolo Bonzini1-4/+4
This makes sense when the next commit starts using the extra buffer space to perform many I/O operations asynchronously. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-25mirror: switch mirror_iteration to AIOPaolo Bonzini1-41/+126
There is really no change in the behavior of the job here, since there is still a maximum of one in-flight I/O operation between the source and the target. However, this patch already introduces the AIO callbacks (which are unmodified in the next patch) and some of the logic to count in-flight operations and only complete the job when there is none. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-25mirror: allow customizing the granularityPaolo Bonzini1-19/+33
The desired granularity may be very different depending on the kind of operation (e.g. continuous replication vs. collapse-to-raw) and whether the VM is expected to perform lots of I/O while mirroring is in progress. Allow the user to customize it, while providing a sane default so that in general there will be no extra allocated space in the target compared to the source. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-25block: allow customizing the granularity of the dirty bitmapPaolo Bonzini1-10/+4
Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-25block: return count of dirty sectors, not chunksPaolo Bonzini1-1/+1
Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-25mirror: perform COW if the cluster size is bigger than the granularityPaolo Bonzini1-9/+53
When mirroring runs, the backing files for the target may not yet be ready. However, this means that a copy-on-write operation on the target would fill the missing sectors with zeros. Copy-on-write only happens if the granularity of the dirty bitmap is smaller than the cluster size (and only for clusters that are allocated in the source after the job has started copying). So far, the granularity was fixed to 1MB; to avoid the problem we detected the situation and required the backing files to be available in that case only. However, we want to lower the granularity for efficiency, so we need a better solution. The solution is to always copy a whole cluster the first time it is touched. The code keeps a bitmap of clusters that have already been allocated by the mirroring job, and only does "manual" copy-on-write if the chunk being copied is zero in the bitmap. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-25block: implement dirty bitmap using HBitmapPaolo Bonzini1-2/+10
This actually uses the dirty bitmap in the block layer, and converts mirroring to use an HBitmapIter. Reviewed-by: Laszlo Ersek <lersek@redhat.com> (except block/mirror.c parts) Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-24iscsi: add support for iovectorsPeter Lieven1-9/+34
This patch adds support for directly passing the iovec array from QEMUIOVector if libiscsi supports it (1.8.0 or newer). Signed-off-by: Peter Lieven <pl@kamp.de> [Preserve the improvements from commit 4cc841b, iscsi: partly avoid iovec linearization in iscsi_aio_writev, 2012-11-19 - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-24iscsi: do not leak acb->buf when commands are abortedPaolo Bonzini1-1/+7
acb->buf is freed in the WRITE(16) callback, but this may not get called at all when commands are aborted. Add another free in the ABORT TASK callback, which requires setting acb->buf to NULL everywhere. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-23Merge remote-tracking branch 'bonzini/scsi-next' into stagingAnthony Liguori1-5/+101
# By Peter Lieven (3) and others # Via Paolo Bonzini * bonzini/scsi-next: scsi: Drop useless null test in scsi_unit_attention() lsi: use qbus_reset_all to reset SCSI bus scsi: fix segfault with 0-byte disk iscsi: add support for iSCSI NOPs [v2] iscsi: partly avoid iovec linearization in iscsi_aio_writev iscsi: add iscsi_create support
2013-01-22iscsi: add support for iSCSI NOPs [v2]Peter Lieven1-0/+38
This patch will send NOP-Out PDUs every 5 seconds to the iSCSI target. If a consecutive number of NOP-In replies fail a reconnect is initiated. iSCSI NOPs help to ensure that the connection to the target is still operational. This should not, but in reality may be the case even if the TCP connection is still alive if there are bugs in either the target or the initiator implementation. v2: - track the NOPs inside libiscsi so libiscsi can reset the counter in case it initiates a reconnect. Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-22iscsi: partly avoid iovec linearization in iscsi_aio_writevPeter Lieven1-5/+11
libiscsi expects all write16 data in a linear buffer. If the iovec only contains one buffer we can skip the linearization step as well as the additional malloc/free and pass the buffer directly. Reported-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-22iscsi: add iscsi_create supportPeter Lieven1-0/+52
This patch adds support for bdrv_create. This allows e.g. to use qemu-img to convert from any supported device to an iscsi backed storage as destination. Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-20Merge remote-tracking branch 'stefanha/block' into stagingAnthony Liguori2-19/+7
# By Kevin Wolf (4) and others # Via Stefan Hajnoczi * stefanha/block: dataplane: support viostor virtio-pci status bit setting dataplane: avoid reentrancy during virtio_blk_data_plane_stop() win32-aio: use iov utility functions instead of open-coding them win32-aio: Fix memory leak win32-aio: Fix vectored reads aio: Fix return value of aio_poll() ide: Remove wrong assertion block: fix null-pointer bug on error case in block commit
2013-01-19block/raw-posix: Make hdev_aio_discard() available outside LinuxAndreas Färber1-13/+13
Fixes the build on OpenBSD among others. Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Andreas Färber <andreas.faerber@web.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-01-18win32-aio: use iov utility functions instead of open-coding themMichael Tokarev1-14/+3
We have iov_from_buf() and iov_to_buf(), use them instead of open-coding these in block/win32-aio.c Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-17win32-aio: Fix memory leakKevin Wolf1-1/+1
The buffer is allocated for both reads and writes, and obviously it should be freed even if an error occurs. Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-17win32-aio: Fix vectored readsKevin Wolf1-1/+1
Copying data in the right direction really helps a lot! Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.1 at 2024-12-24 05:24:01 +0000