| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Currently block_resize qmp command is simply ignored by vhost-user-blk
export. So, the block-node is successfully resized, but virtio config
is unchanged and guest doesn't see that disk is resized.
Let's handle the resize by modifying the config and notifying the guest
appropriately.
After this comment, lsblk in linux guest with attached
vhost-user-blk-pci device shows new size immediately after block_resize
QMP command on vhost-user exported block node.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20230321201323.3695923-1-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Since the former nfs_get_allocated_file_size is now a coroutine
function, it must suspend rather than poll. Switch BDRV_POLL_WHILE()
to a qemu_coroutine_yield() loop and schedule nfs_co_generic_bh_cb()
in place of the call to bdrv_wakeup().
Fixes: 82618d7bc341 ("block: Convert bdrv_get_allocated_file_size() to co_wrapper", 2023-02-01)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230412112606.80983-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The introduction of the graph lock is causing blk_get_geometry, a hot function
used in the I/O path, to create a coroutine. However, the only part that really
needs to run in coroutine context is the call to bdrv_co_refresh_total_sectors,
which in turn only happens in the rare case of host CD-ROM devices.
So, write by hand the three wrappers on the path from blk_co_get_geometry to
bdrv_co_refresh_total_sectors, so that the coroutine wrapper is only created
if bdrv_nb_sectors actually calls bdrv_refresh_total_sectors.
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230407153303.391121-9-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
All callers of blk_co_nb_sectors (and blk_nb_sectors) are able to
handle a non-inserted CD-ROM as a zero-length file, they do not need
to raise an error.
Not using blk_co_is_available() aligns the function with
blk_co_get_geometry(), which becomes a simple wrapper for
blk_co_nb_sectors(). It will also make it possible to skip the creation
of a coroutine in the (common) case where bs->bl.has_variable_length
is false.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230407153303.391121-8-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
bdrv_co_get_geometry is only used in blk_co_get_geometry. Inline it in
there, to reduce the number of wrappers for bs->total_sectors.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230407153303.391121-7-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Fill in the field in BlockLimits directly for host devices, and
copy it from there for the raw format.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230407153303.391121-5-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Filters automatically get has_variable_length from their underlying
BlockDriverState. There is no need to mark them as variable-length
in the BlockDriver.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230407153303.391121-3-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
At the protocol level, has_variable_length only needs to be true in the
very special case of host CD-ROM drives, so that they do not need an
explicit monitor command to read the new size when a disc is loaded
in the tray.
However, at the format level has_variable_length has to be true for all
raw blockdevs and for all filters, even though in practice the length
depends on the underlying file and thus will not change except in the
case of host CD-ROM drives.
As a first step towards computing an accurate value of has_variable_length,
add the value into the BlockLimits structure and initialize the field
from the BlockDriver.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230407153303.391121-2-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The corruption occurs when a BAT entry aligned to 4096 bytes is changed.
Specifically, the corruption occurs during the creation of the LOG Data
Descriptor. The incorrect behavior involves copying 4088 bytes from the
original 4096 bytes aligned offset to `tmp[8..4096]` and then copying
the new value for the first BAT entry to the beginning `tmp[0..8]`.
This results in all existing BAT entries inside the 4K region being
incorrectly moved by 8 bytes and the last entry being lost.
This bug did not cause noticeable corruption when only sequentially
writing once to an empty dynamic VHDX (e.g.
using `qemu-img convert -O vhdx -o subformat=dynamic ...`), but it
still resulted in invalid values for the (unused) Sector Bitmap BAT
entries.
Importantly, this corruption would only become noticeable after the
corrupted BAT is re-read from the file.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/727
Cc: qemu-stable@nongnu.org
Signed-off-by: Lukas Tschoke <lukts330@gmail.com>
Message-Id: <6cfb6d6b-adc5-7772-c8a5-6bae9a0ad668@gmail.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
When liblzfe (Apple LZFSE compression library) is present
(for example installed via 'brew') on Darwin, QEMU build
fails as:
Has header "lzfse.h" : YES
Library lzfse found: YES
Dependencies
lzo support : NO
snappy support : NO
bzip2 support : YES
lzfse support : YES
zstd support : YES 1.5.2
User defined options
dmg : enabled
lzfse : enabled
[221/903] Compiling C object libblock.fa.p/block_dmg-lzfse.c.o
FAILED: libblock.fa.p/block_dmg-lzfse.c.o
/opt/homebrew/Cellar/lzfse/1.0/include/lzfse.h:56:43: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
LZFSE_API size_t lzfse_encode_scratch_size();
^
void
/opt/homebrew/Cellar/lzfse/1.0/include/lzfse.h:94:43: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
LZFSE_API size_t lzfse_decode_scratch_size();
^
void
2 errors generated.
ninja: build stopped: subcommand failed.
This issue has been reported in the lzfse project in 2016:
https://github.com/lzfse/lzfse/issues/3#issuecomment-226574719
Since the project seems unmaintained, simply ignore the
strict-prototypes warning check for the <lzfse.h> header,
similarly to how we deal with the GtkItemFactoryCallback
prototype from <gtk/gtkitemfactory.h>, indirectly included
by <gtk/gtk.h>.
Cc: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20230327151349.97572-1-philmd@linaro.org>
|
|
blk_get_geometry() eventually calls bdrv_nb_sectors(), which is a
co_wrapper_mixed_bdrv_rdlock. This means that when it is called from
coroutine context, it already assume to have the graph locked.
However, virtio_blk_sect_range_ok() in block/export/virtio-blk-handler.c
(used by vhost-user-blk and VDUSE exports) runs in a coroutine, but
doesn't take the graph lock - blk_*() functions are generally expected
to do that internally. This causes an assertion failure when accessing
an export for the first time if it runs in an iothread.
This is an example of the crash:
$ ./storage-daemon/qemu-storage-daemon --object iothread,id=th0 --blockdev file,filename=/home/kwolf/images/hd.img,node-name=disk --export vhost-user-blk,addr.type=unix,addr.path=/tmp/vhost.sock,node-name=disk,id=exp0,iothread=th0
qemu-storage-daemon: ../block/graph-lock.c:268: void assert_bdrv_graph_readable(void): Assertion `qemu_in_main_thread() || reader_count()' failed.
(gdb) bt
#0 0x00007ffff6eafe5c in __pthread_kill_implementation () from /lib64/libc.so.6
#1 0x00007ffff6e5fa76 in raise () from /lib64/libc.so.6
#2 0x00007ffff6e497fc in abort () from /lib64/libc.so.6
#3 0x00007ffff6e4971b in __assert_fail_base.cold () from /lib64/libc.so.6
#4 0x00007ffff6e58656 in __assert_fail () from /lib64/libc.so.6
#5 0x00005555556337a3 in assert_bdrv_graph_readable () at ../block/graph-lock.c:268
#6 0x00005555555fd5a2 in bdrv_co_nb_sectors (bs=0x5555564c5ef0) at ../block.c:5847
#7 0x00005555555ee949 in bdrv_nb_sectors (bs=0x5555564c5ef0) at block/block-gen.c:256
#8 0x00005555555fd6b9 in bdrv_get_geometry (bs=0x5555564c5ef0, nb_sectors_ptr=0x7fffef7fedd0) at ../block.c:5884
#9 0x000055555562ad6d in blk_get_geometry (blk=0x5555564cb200, nb_sectors_ptr=0x7fffef7fedd0) at ../block/block-backend.c:1624
#10 0x00005555555ddb74 in virtio_blk_sect_range_ok (blk=0x5555564cb200, block_size=512, sector=0, size=512) at ../block/export/virtio-blk-handler.c:44
#11 0x00005555555dd80d in virtio_blk_process_req (handler=0x5555564cbb98, in_iov=0x7fffe8003830, out_iov=0x7fffe8003860, in_num=1, out_num=0) at ../block/export/virtio-blk-handler.c:189
#12 0x00005555555dd546 in vu_blk_virtio_process_req (opaque=0x7fffe8003800) at ../block/export/vhost-user-blk-server.c:66
#13 0x00005555557bf4a1 in coroutine_trampoline (i0=-402635264, i1=32767) at ../util/coroutine-ucontext.c:177
#14 0x00007ffff6e75c20 in ?? () from /lib64/libc.so.6
#15 0x00007fffefffa870 in ?? ()
#16 0x0000000000000000 in ?? ()
Fix this by creating a new blk_co_get_geometry() that takes the lock,
and changing blk_get_geometry() to be a co_wrapper_mixed around it.
To make the resulting code cleaner, virtio-blk-handler.c can directly
call the coroutine version now (though that wouldn't be necessary for
fixing the bug, taking the lock in blk_co_get_geometry() is what fixes
it).
Fixes: 8ab8140a04cf771d63e9754d6ba6c1e676bfe507
Reported-by: Lukáš Doktor <ldoktor@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230327113959.60071-1-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This had been pulled in via qemu/plugin.h from hw/core/cpu.h,
but that will be removed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230310195252.210956-5-richard.henderson@linaro.org>
[AJB: add various additional cases shown by CI]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-15-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
|
|
This looks like a copy-paste or merge error. BDRV_POLL_WHILE() is
already called above. It's not needed in the qemu_in_coroutine() case.
Fixes: 9fb4dfc570ce ("qed: make bdrv_qed_do_open a coroutine_fn")
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230309163134.398707-1-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
fallocate(2) says about PUNCH_HOLE: "After a successful call, subsequent
reads from this range will return zeros." As it is, PUNCH_HOLE is
implemented as a call to blk_pdiscard(), which does not guarantee this.
We must call blk_pwrite_zeroes() instead. The difference to ZERO_RANGE
is that we pass the `BDRV_REQ_MAY_UNMAP | BDRV_REQ_NO_FALLBACK` flags to
the call -- the storage is supposed to be unmapped, and a slow fallback
by actually writing zeroes as data is not allowed.
Closes: https://gitlab.com/qemu-project/qemu/-/issues/1507
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230227104725.33511-2-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Since commit 262a69f428 ("osdep.h: Prohibit disabling
assert() in supported builds") 'NDEBUG' can not be defined,
so '#ifndef NDEBUG' is dead code. Remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230221232520.14480-5-philmd@linaro.org>
|
|
Block layer patches
- Lock the graph, part 2 (BlockDriver callbacks)
- virtio-scsi: fix SCSIDevice hot unplug with IOThread
- rbd: Add support for layered encryption
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmP3tUURHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9ZQkA/9HFBrcsfSyzU5sHXcpqrcVPsvFwwzhsXN
# V6zMvBXQVEMYo6oDBSyNrniOJSYjiFLm1c+bMAaAFbo8dvVqqlkecBuZgQkFjnCy
# vXyaYeWnBSG5A91Vs30qzLObBsrX7P1Gh+bvtRvBPThC1zd8lrxMbVzlsxnTfDFo
# DsPkgiXL0SZ6YLBN5s61GBCfjvF8i0/8TPAvvwhHEo15sBgcBSTFYSftzEe9TXmH
# NHAuHnRshrd9DNnf20tVPuHCanSTsIpbx5cLYBoy81vSbjqJG4agULZLltKP3fiM
# kadpqmhJwjq+KhioLmcIjevPnUuqOMEzubaxZUm9o8jjsFPa8Isv4sIaAxyUP6e6
# aze1Xh9vUXn/JEf2/hApUY+2rz5dREL/TqpFwyzZjdqJb8PVCuy1JA1m2zLkvRPd
# Bl9pS7kabhcZOHrITnJS7Lvyy4IWeiw78trtaer0nCbKbPdQB62eswSXKYh5g+Ke
# kVJbkRSNi6lnljK5egIR3VxxM5kbGZsY4aGuyZk3Lc5yeAuPOil9swHlSO+5LFxP
# lRZOyumHbfKU6J7JbGFErrqR2fZiqKUN/6i0HZAIcjpZq1QxXlmHBbmrkXao+j5Y
# 0WcHdduH65dHT8fnBMgDZCXUfV7iBufspkCmY1v50YNJRPNmDzb4Os/Jh9qLHHMQ
# M1ae+58T0Fo=
# =gOli
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 23 Feb 2023 18:49:41 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin: (29 commits)
block/rbd: Add support for layered encryption
block/rbd: Add luks-any encryption opening option
block/rbd: Remove redundant stack variable passphrase_len
virtio-scsi: reset SCSI devices from main loop thread
dma-helpers: prevent dma_blk_cb() vs dma_aio_cancel() race
scsi: protect req->aiocb with AioContext lock
block: Mark bdrv_co_refresh_total_sectors() and callers GRAPH_RDLOCK
block: Mark bdrv_*_dirty_bitmap() and callers GRAPH_RDLOCK
block: Mark bdrv_co_delete_file() and callers GRAPH_RDLOCK
block: Mark bdrv_(un)register_buf() GRAPH_RDLOCK
block: Mark bdrv_co_eject/lock_medium() and callers GRAPH_RDLOCK
block: Mark bdrv_co_is_inserted() and callers GRAPH_RDLOCK
block: Mark bdrv_co_io_(un)plug() and callers GRAPH_RDLOCK
block: Mark bdrv_co_create() and callers GRAPH_RDLOCK
block: Mark preadv_snapshot/snapshot_block_status GRAPH_RDLOCK
block: Mark bdrv_co_copy_range() GRAPH_RDLOCK
block: Mark bdrv_co_do_pwrite_zeroes() GRAPH_RDLOCK
block: Mark bdrv_co_pwrite_sync() and callers GRAPH_RDLOCK
block: Mark public read/write functions GRAPH_RDLOCK
block: Mark read/write in block/io.c GRAPH_RDLOCK
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Starting from ceph Reef, RBD has built-in support for layered encryption,
where each ancestor image (in a cloned image setting) can be possibly
encrypted using a unique passphrase.
A new function, rbd_encryption_load2, was added to librbd API.
This new function supports an array of passphrases (via "spec" structs).
This commit extends the qemu rbd driver API to use this new librbd API,
in order to support this new layered encryption feature.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Message-Id: <20230129113120.722708-4-oro@oro.sl.cloud9.ibm.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Ceph RBD encryption API required specifying the encryption format
for loading encryption. The supported formats were LUKS (v1) and LUKS2.
Starting from Reef release, RBD also supports loading with "luks-any" format,
which works for both versions of LUKS.
This commit extends the qemu rbd driver API to enable qemu users to use
this luks-any wildcard format.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Message-Id: <20230129113120.722708-3-oro@oro.sl.cloud9.ibm.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Message-Id: <20230129113120.722708-2-oro@oro.sl.cloud9.ibm.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_refresh_total_sectors() need to hold a reader lock for the
graph.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-24-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_*_dirty_bitmap() need to hold a reader lock for the graph.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-23-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_register_buf() and bdrv_unregister_buf() need to hold a reader lock
for the graph.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-21-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_eject() and bdrv_co_lock_medium() need to hold a reader lock for
the graph.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-20-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_is_inserted() need to hold a reader lock for the graph.
blk_is_inserted() is done as a co_wrapper_mixed_bdrv_rdlock (unlike most
other blk_* functions) because it is called a lot from other blk_co_*()
functions that already hold the lock. These calls go through
blk_is_available(), which becomes a co_wrapper_mixed_bdrv_rdlock, too,
for the same reason.
Functions that run in a coroutine and can call bdrv_co_is_available()
directly are changed to do so, which results in better TSA coverage.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-19-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_io_plug() and bdrv_co_io_unplug() need to hold a reader lock for
the graph.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-18-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_create() need to hold a reader lock for the graph.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-17-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-16-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_copy_range() need to hold a reader lock for the graph.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-15-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
All callers are already GRAPH_RDLOCK, so just add the annotation and
remove assume_graph_lock().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-14-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_pwrite_sync() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-13-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_pread*/pwrite*() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-12-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_driver_*() need to hold a reader lock for the graph. It doesn't add
the annotation to public functions yet.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-11-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_pwrite_zeroes() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-10-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_pdiscard() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-9-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_flush() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-8-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This function is called in two different places:
- timer callback, which does not take the graph rdlock.
- bdrv_qed_drain_begin(), which is .bdrv_drain_begin()
callback documented as function that does not take the lock.
Since it calls recursive functions that traverse the
graph, we need to protect them with the graph rdlock.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-7-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_ioctl() need to hold a reader lock for the graph.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-6-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_block_status() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-5-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_truncate() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-4-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
bdrv_mirror_top_pwritev() accesses the job object when active mirroring
is enabled. It disables this code during early initialisation while
s->job isn't set yet.
However, s->job is still set way too early when the job object isn't
fully initialised. For example, &s->ops_in_flight isn't initialised yet
and the in_flight bitmap doesn't exist yet. This causes crashes when a
write request comes in too early.
Move the assignment of s->job to when the mirror job is actually fully
initialised to make sure that the mirror_top driver doesn't access it
too early.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-3-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230207075115.1525-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
|
|
When calling bdrv_getlength() in handle_aiocb_write_zeroes(), the
function creates a new coroutine and then waits that it finishes using
AIO_WAIT_WHILE.
The problem is that this function could also run in a worker thread,
that has a different AioContext from main loop and iothreads, therefore
in AIO_WAIT_WHILE we will have in_aio_context_home_thread(ctx) == false
and therefore
assert(qemu_get_current_aio_context() == qemu_get_aio_context());
in the else branch will fail, crashing QEMU.
Aside from that, bdrv_getlength() is wrong also conceptually, because
it reads the BDS graph from another thread and is not protected by
any lock.
Replace it with raw_co_getlength, that doesn't create a coroutine and
doesn't read the BDS graph.
Reported-by: Ninad Palsule <ninad@linux.vnet.ibm.com>
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230209154522.1164401-1-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
* 7.55.0 deprecates CURLINFO_CONTENT_LENGTH_DOWNLOAD in favour of a *_T
version, which returns curl_off_t instead of a double.
* 7.85.0 deprecates CURLOPT_PROTOCOLS and CURLOPT_REDIR_PROTOCOLS in
favour of *_STR variants, specifying the desired protocols via a
string.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1440
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230123201431.23118-1-anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
.bdrv_co_create implementations run in a coroutine. Therefore they are
not allowed to open images directly. Fix the calls to use the
corresponding no_co_wrappers instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230126172432.436111-12-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
.bdrv_co_create implementations run in a coroutine. Therefore they are
not allowed to open images directly. Fix the calls to use the
corresponding no_co_wrappers instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230126172432.436111-11-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
.bdrv_co_create implementations run in a coroutine. Therefore they are
not allowed to open images directly. Fix the calls to use the
corresponding no_co_wrappers instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230126172432.436111-10-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
.bdrv_co_create implementations run in a coroutine. Therefore they are
not allowed to open images directly. Fix the calls to use the
corresponding no_co_wrappers instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230126172432.436111-9-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
.bdrv_co_create implementations run in a coroutine. Therefore they are
not allowed to open images directly. Fix the calls to use the
corresponding no_co_wrappers instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230126172432.436111-8-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
.bdrv_co_create implementations run in a coroutine, as does
qcow2_do_open(). Therefore they are not allowed to open images directly.
Fix the calls to use the corresponding no_co_wrappers instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230126172432.436111-7-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
.bdrv_co_create implementations run in a coroutine. Therefore they are
not allowed to open images directly. Fix the calls to use the
corresponding no_co_wrappers instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230126172432.436111-6-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
