aboutsummaryrefslogtreecommitdiff
path: root/block
AgeCommit message (Collapse)AuthorFilesLines
2017-09-27Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell12-41/+289
Block layer patches # gpg: Signature made Tue 26 Sep 2017 14:52:32 BST # gpg: using RSA key 0x7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: (24 commits) block/qcow2-bitmap: fix use of uninitialized pointer qemu-iotests: add shrinking image test qcow2: add shrink image support qcow2: add qcow2_cache_discard qemu-img: add --shrink flag for resize iotests: fix 181: enable postcopy-ram capability on target qemu-iotests: Test change-backing-file command block: Fix permissions after bdrv_reopen() block: reopen: Queue children after their parents block: Base permissions on rw state after reopen block: Add reopen queue to bdrv_check_perm() block: Add reopen_queue to bdrv_child_perm() qemu-io: Drop write permissions before read-only reopen block: Clean up some bad code in the vvfat driver block/throttle-groups.c: allocate RestartData on the heap throttle: Assert that bkt->max is valid in throttle_compute_wait() iotests: Print full path of bad output if mismatch iotests: use virtio aliases for 067 iotests: use -ccw on s390x for 051 iotests: use -ccw on s390x for 040, 139, and 182 ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-26block/qcow2-bitmap: fix use of uninitialized pointerVladimir Sementsov-Ogievskiy1-1/+1
Without initialization to zero dirty_bitmap field may be not zero for a bitmap which should not be stored and qcow2_store_persistent_dirty_bitmaps will erroneously call store_bitmap for it which leads to SIGSEGV on bdrv_dirty_bitmap_name. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 20170922144353.4220-1-vsementsov@virtuozzo.com Cc: qemu-stable@nongnu.org Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-09-26qcow2: add shrink image supportPavel Butsykin4-9/+218
This patch add shrinking of the image file for qcow2. As a result, this allows us to reduce the virtual image size and free up space on the disk without copying the image. Image can be fragmented and shrink is done by punching holes in the image file. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 20170918124230.8152-4-pbutsykin@virtuozzo.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-09-26qcow2: add qcow2_cache_discardPavel Butsykin3-2/+47
Whenever l2/refcount table clusters are discarded from the file we can automatically drop unnecessary content of the cache tables. This reduces the chance of eviction useful cache data and eliminates inconsistent data in the cache with the data in the file. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 20170918124230.8152-3-pbutsykin@virtuozzo.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-09-26block: Add reopen_queue to bdrv_child_perm()Kevin Wolf4-0/+4
In the context of bdrv_reopen(), we'll have to look at the state of the graph as it will be after the reopen. This interface addition is in preparation for the change. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-09-26block: Clean up some bad code in the vvfat driverThomas Huth1-24/+2
Remove the unnecessary home-grown redefinition of the assert() macro here, and remove the unusable debug code at the end of the checkpoint() function. The code there uses assert() with side-effects (assignment to the "mapping" variable), which should be avoided. Looking more closely, it seems as it is apparently also only usable for one certain directory layout (with a file named USB.H in it) and thus is of no use for the rest of the world. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-09-26block/throttle-groups.c: allocate RestartData on the heapManos Pitsidianakis1-5/+7
RestartData is the opaque data of the throttle_group_restart_queue_entry coroutine. By being stack allocated, it isn't available anymore if aio_co_enter schedules the coroutine with a bottom half and runs after throttle_group_restart_queue returns. Cc: qemu-stable@nongnu.org Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-09-26file-posix: Clear out first sector in hdev_createFam Zheng1-0/+10
People get surprised when, after "qemu-img create -f raw /dev/sdX", they still see qcow2 with "qemu-img info", if previously the bdev had a qcow2 header. While this is natural because raw doesn't need to write any magic bytes during creation, hdev_create is free to clear out the first sector to make sure the stale qcow2 header doesn't cause such confusion. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-09-25block/nbd-client: nbd_co_send_request: fix return codeVladimir Sementsov-Ogievskiy1-0/+2
It's incorrect to return success rc >= 0 if we skip qio_channel_writev_all() call due to s->quit. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20170920124507.18841-4-vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-09-25block/nbd-client: simplify check in nbd_co_receive_replyVladimir Sementsov-Ogievskiy1-1/+2
If we are woken up from while() loop in nbd_read_reply_entry handles must be equal. If we are woken up from nbd_recv_coroutines_wake_all s->quit must be true, so we do not need checking handles equality. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20170920124507.18841-3-vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-09-25block/nbd-client: refactor nbd_co_receive_replyVladimir Sementsov-Ogievskiy1-15/+15
"NBDReply *reply" parameter of nbd_co_receive_reply is used only to pass return value for nbd_co_request (reply.error). Remove it and use function return value instead. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20170920124507.18841-2-vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-09-25nbd-client: Use correct macro parenthesizationEric Blake1-2/+2
If 'bs' is a complex expression, we were only casting the front half rather than the full expression. Luckily, none of the callers were passing bad arguments, but it's better to be robust up front. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20170918214649.17550-1-eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-09-22scsi, file-posix: add support for persistent reservation managementPaolo Bonzini1-0/+30
It is a common requirement for virtual machine to send persistent reservations, but this currently requires either running QEMU with CAP_SYS_RAWIO, or using out-of-tree patches that let an unprivileged QEMU bypass Linux's filter on SG_IO commands. As an alternative mechanism, the next patches will introduce a privileged helper to run persistent reservation commands without expanding QEMU's attack surface unnecessarily. The helper is invoked through a "pr-manager" QOM object, to which file-posix.c passes SG_IO requests for PERSISTENT RESERVE OUT and PERSISTENT RESERVE IN commands. For example: $ qemu-system-x86_64 -device virtio-scsi \ -object pr-manager-helper,id=helper0,path=/var/run/qemu-pr-helper.sock -drive if=none,id=hd,driver=raw,file.filename=/dev/sdb,file.pr-manager=helper0 -device scsi-block,drive=hd or: $ qemu-system-x86_64 -device virtio-scsi \ -object pr-manager-helper,id=helper0,path=/var/run/qemu-pr-helper.sock -blockdev node-name=hd,driver=raw,file.driver=host_device,file.filename=/dev/sdb,file.pr-manager=helper0 -device scsi-block,drive=hd Multiple pr-manager implementations are conceivable and possible, though only one is implemented right now. For example, a pr-manager could: - talk directly to the multipath daemon from a privileged QEMU (i.e. QEMU links to libmpathpersist); this makes reservation work properly with multipath, but still requires CAP_SYS_RAWIO - use the Linux IOC_PR_* ioctls (they require CAP_SYS_ADMIN though) - more interestingly, implement reservations directly in QEMU through file system locks or a shared database (e.g. sqlite) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19General warn report fixupsAlistair Francis1-2/+1
Tidy up some of the warn_report() messages after having converted them to use warn_report(). Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <9cb1d23551898c9c9a5f84da6773e99871285120.1505158760.git.alistair.francis@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19Convert multi-line fprintf() to warn_report()Alistair Francis1-2/+2
Convert all the multi-line uses of fprintf(stderr, "warning:"..."\n"... to use warn_report() instead. This helps standardise on a single method of printing warnings to the user. All of the warnings were changed using these commands: find ./* -type f -exec sed -i \ 'N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + Indentation fixed up manually afterwards. Some of the lines were manually edited to reduce the line length to below 80 charecters. Some of the lines with newlines in the middle of the string were also manually edit to avoid checkpatch errrors. The #include lines were manually updated to allow the code to compile. Several of the warning messages can be improved after this patch, to keep this patch mechanical this has been moved into a later patch. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Anthony Perard <anthony.perard@citrix.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Alexander Graf <agraf@suse.de> Cc: Jason Wang <jasowang@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <5def63849ca8f551630c6f2b45bcb1c482f765a6.1505158760.git.alistair.francis@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19Convert single line fprintf(.../n) to warn_report()Alistair Francis1-1/+3
Convert all the single line uses of fprintf(stderr, "warning:"..."\n"... to use warn_report() instead. This helps standardise on a single method of printing warnings to the user. All of the warnings were changed using this command: find ./* -type f -exec sed -i \ 's|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig' \ {} + Some of the lines were manually edited to reduce the line length to below 80 charecters. The #include lines were manually updated to allow the code to compile. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael Roth <mdroth@linux.vnet.ibm.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> [mips] Message-Id: <ae8f8a7f0a88ded61743dff2adade21f8122a9e7.1505158760.git.alistair.francis@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19Convert remaining error_report() to warn_report()Alistair Francis1-4/+5
In a previous patch (3dc6f8693694a649a9c83f1e2746565b47683923) we converted uses of error_report("warning:"... to use warn_report() instead. This was to help standardise on a single method of printing warnings to the user. There appears to have been some cases that slipped through in patch sets applied around the same time, this patch catches the few remaining cases. All of the warnings were changed using this command: find ./* -type f -exec sed -i \ 's|error_report(".*warning[,:] |warn_report("|Ig' {} + Indentation fixed up manually afterwards. Two messages were manually fixed up as well. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Alexander Graf <agraf@suse.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <eec8cba0d5434bd828639e5e45f12182490ff47d.1505158760.git.alistair.francis@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19scsi: move block/scsi.h to include/scsi/constants.hPaolo Bonzini1-1/+1
Complete the transition by renaming this header, which was shared by block/iscsi.c and the SCSI emulation code. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19scsi: move non-emulation specific code to scsi/Paolo Bonzini1-1/+5
util/scsi.c includes some SCSI code that is shared by block/iscsi.c and hw/scsi, but the introduction of the persistent reservation helper will add many more instances of this. There is also include/block/scsi.h, which actually is not part of the core block layer. The persistent reservation manager will also need a home. A scsi/ directory provides one for both the aforementioned shared code and the PR manager code. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19scsi: Refactor scsi sense interpreting codeFam Zheng1-41/+4
So that it can be reused outside of iscsi.c. Also update MAINTAINERS to include the new files in SCSI section. Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170821141008.19383-2-famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-07Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2017-09-06' into ↵Peter Maydell1-8/+7
staging nbd patches for 2017-09-06 - Daniel P. Berrange: [0/2] Fix / skip recent iotests with LUKS driver - Eric Blake: [0/3] nbd: Use common read/write-all qio functions # gpg: Signature made Wed 06 Sep 2017 16:17:55 BST # gpg: using RSA key 0xA7A16B4A2527436A # gpg: Good signature from "Eric Blake <eblake@redhat.com>" # gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" # gpg: aka "[jpeg image of size 6874]" # Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A * remotes/ericb/tags/pull-nbd-2017-09-06: nbd: Use new qio_channel_*_all() functions io: Add new qio_channel_read{, v}_all_eof functions io: Yield rather than wait when already in coroutine iotests: blacklist 194 with the luks driver iotests: rewrite 192 to use _launch_qemu to fix LUKS support Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-07Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell12-337/+966
Block layer patches # gpg: Signature made Wed 06 Sep 2017 14:44:41 BST # gpg: using RSA key 0x7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: qcow2: move qcow2_store_persistent_dirty_bitmaps() before cache flushing qemu-iotests: add 184 for throttle filter driver block: add throttle block filter driver block: convert ThrottleGroup to object with QOM block: tidy ThrottleGroupMember initializations block: add aio_context field in ThrottleGroupMember block: move ThrottleGroup membership to ThrottleGroupMember block: document semantics of bdrv_co_preadv|pwritev qcow: Check failure of bdrv_getlength() and bdrv_truncate() qcow: Change signature of get_cluster_offset() block: add default implementations for bdrv_co_get_block_status() block: remove bdrv_truncate callback in blkdebug block: remove unused bdrv_media_changed block: pass bdrv_* methods to bs->file by default in block filters Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-06nbd: Use new qio_channel_*_all() functionsEric Blake1-8/+7
Rather than open-coding our own read/write-all functions, we can make use of the recently-added qio code. It slightly changes the error message in one of the iotests. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20170905191114.5959-4-eblake@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
2017-09-06qcow2: move qcow2_store_persistent_dirty_bitmaps() before cache flushingPavel Butsykin1-8/+8
After calling qcow2_inactivate(), all qcow2 caches must be flushed, but this may not happen, because the last call qcow2_store_persistent_dirty_bitmaps() can lead to marking l2/refcont cache as dirty. Let's move qcow2_store_persistent_dirty_bitmaps() before the caсhe flushing to fix it. Cc: qemu-stable@nongnu.org Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-09-06block: add throttle block filter driverManos Pitsidianakis3-1/+252
block/throttle.c uses existing I/O throttle infrastructure inside a block filter driver. I/O operations are intercepted in the filter's read/write coroutines, and referred to block/throttle-groups.c The driver can be used with the syntax -drive driver=throttle,file.filename=foo.qcow2,throttle-group=bar which registers the throttle filter node with the ThrottleGroup 'bar'. The given group must be created beforehand with object-add or -object. Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-09-05block: convert ThrottleGroup to object with QOMManos Pitsidianakis1-42/+382
ThrottleGroup is converted to an object. This will allow the future throttle block filter drive easy creation and configuration of throttle groups in QMP and cli. A new QAPI struct, ThrottleLimits, is introduced to provide a shared struct for all throttle configuration needs in QMP. ThrottleGroups can be created via CLI as -object throttle-group,id=foo,x-iops-total=100,x-.. where x-* are individual limit properties. Since we can't add non-scalar properties in -object this interface must be used instead. However, setting these properties must be disabled after initialization because certain combinations of limits are forbidden and thus configuration changes should be done in one transaction. The individual properties will go away when support for non-scalar values in CLI is implemented and thus are marked as experimental. ThrottleGroup also has a `limits` property that uses the ThrottleLimits struct. It can be used to create ThrottleGroups or set the configuration in existing groups as follows: { "execute": "object-add", "arguments": { "qom-type": "throttle-group", "id": "foo", "props" : { "limits": { "iops-total": 100 } } } } { "execute" : "qom-set", "arguments" : { "path" : "foo", "property" : "limits", "value" : { "iops-total" : 99 } } } This also means a group's configuration can be fetched with qom-get. Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-09-05block: tidy ThrottleGroupMember initializationsManos Pitsidianakis2-3/+3
Move the CoMutex and CoQueue inits inside throttle_group_register_tgm() which is called whenever a ThrottleGroupMember is initialized. There's no need for them to be separate. Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-09-05block: add aio_context field in ThrottleGroupMemberManos Pitsidianakis2-23/+30
timer_cb() needs to know about the current Aio context of the throttle request that is woken up. In order to make ThrottleGroupMember backend agnostic, this information is stored in an aio_context field instead of accessing it from BlockBackend. Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-09-05block: move ThrottleGroup membership to ThrottleGroupMemberManos Pitsidianakis3-176/+186
This commit eliminates the 1:1 relationship between BlockBackend and throttle group state. Users will be able to create multiple throttle nodes, each with its own throttle group state, in the future. The throttle group state cannot be per-BlockBackend anymore, it must be per-throttle node. This is done by gathering ThrottleGroup membership details from BlockBackendPublic into ThrottleGroupMember and refactoring existing code to use the structure. Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-09-05Merge remote-tracking branch 'remotes/berrange/tags/pull-qio-20170905-2' ↵Peter Maydell2-2/+2
into staging Merge QEMU I/O 2017/09/05 v2 # gpg: Signature made Tue 05 Sep 2017 13:22:36 BST # gpg: using RSA key 0xBE86EBB415104FDF # gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" # gpg: aka "Daniel P. Berrange <berrange@redhat.com>" # Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF * remotes/berrange/tags/pull-qio-20170905-2: io: fix check for handshake completion in TLS test io: add new qio_channel_{readv, writev, read, write}_all functions io: fix typo in docs comment for qio_channel_read util: remove the obsolete non-blocking connect io: fix temp directory used by test-io-channel-tls test Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-05util: remove the obsolete non-blocking connectCao jin2-2/+2
The non-blocking connect mechanism is obsolete, and it doesn't work well in inet connection, because it will call getaddrinfo first and getaddrinfo will blocks on DNS lookups. Since commit e65c67e4 & d984464e, the non-blocking connect of migration goes through QIOChannel in a different manner(using a thread), and nobody use this old non-blocking connect anymore. Any newly written code which needs a non-blocking connect should use the QIOChannel code, so we can drop NonBlockingConnectHandler as a concept entirely. Suggested-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-09-04qcow: Check failure of bdrv_getlength() and bdrv_truncate()Eric Blake1-8/+22
Omitting the check for whether bdrv_getlength() and bdrv_truncate() failed meant that it was theoretically possible to return an incorrect offset to the caller. More likely, conditions for either of these functions to fail would also cause one of our other calls (such as bdrv_pread() or bdrv_pwrite_sync()) to also fail, but auditing that we are safe is difficult compared to just patching things to always forward on the error rather than ignoring it. Use osdep.h macros instead of open-coded rounding while in the area. Reported-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-09-04qcow: Change signature of get_cluster_offset()Eric Blake1-50/+73
The old signature has an ambiguous meaning for a return of 0: either no allocation was requested or necessary, or an error occurred (but any errno associated with the error is lost to the caller, which then has to assume EIO). Better is to follow the example of qcow2, by changing the signature to have a separate return value that cleanly distinguishes between failure and success, along with a parameter that cleanly holds a 64-bit value. Then update all callers. While auditing that all return paths return a negative errno (rather than -1), I also simplified places where we can pass NULL rather than a local Error that just gets thrown away. Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-09-04block: add default implementations for bdrv_co_get_block_status()Manos Pitsidianakis4-33/+29
bdrv_co_get_block_status_from_file() and bdrv_co_get_block_status_from_backing() set *file to bs->file and bs->backing respectively, so that bdrv_co_get_block_status() can recurse to them. Future block drivers won't have to duplicate code to implement this. Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-09-04block: remove bdrv_truncate callback in blkdebugManos Pitsidianakis1-7/+1
Now that bdrv_truncate is passed to bs->file by default, remove the callback from block/blkdebug.c and set is_filter to true. is_filter also gives access to other callbacks that are forwarded automatically to bs->file for filters. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-09-04block: remove unused bdrv_media_changedManos Pitsidianakis1-6/+0
This function is not used anywhere, so remove it. Markus Armbruster adds: The i82078 floppy device model used to call bdrv_media_changed() to implement its media change bit when backed by a host floppy. This went away in 21fcf36 "fdc: simplify media change handling". Probably broke host floppy media change. Host floppy pass-through was dropped in commit f709623. bdrv_media_changed() has never been used for anything else. Remove it. (Source is Message-ID: <87y3ruaypm.fsf@dusky.pond.sub.org>) Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-09-04qapi: drop the sentinel in enum arrayMarc-André Lureau1-1/+0
Now that all usages have been converted to user lookup helpers. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20170822132255.23945-14-marcandre.lureau@redhat.com> [Rebased, superfluous local variable dropped, missing check-qom-proplist.c update added] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503564371-26090-17-git-send-email-armbru@redhat.com>
2017-09-04qapi: Change data type of the FOO_lookup generated for enum FOOMarc-André Lureau7-17/+21
Currently, a FOO_lookup is an array of strings terminated by a NULL sentinel. A future patch will generate enums with "holes". NULL-termination will cease to work then. To prepare for that, store the length in the FOO_lookup by wrapping it in a struct and adding a member for the length. The sentinel will be dropped next. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20170822132255.23945-13-marcandre.lureau@redhat.com> [Basically redone] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503564371-26090-16-git-send-email-armbru@redhat.com> [Rebased]
2017-09-04qapi: Mechanically convert FOO_lookup[...] to FOO_str(...)Markus Armbruster10-13/+13
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503564371-26090-14-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-09-04qapi: Generate FOO_str() macro for QAPI enum FOOMarkus Armbruster7-7/+0
The next commit will put it to use. May look pointless now, but we're going to change the FOO_lookup's type, and then it'll help. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503564371-26090-13-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-09-04quorum: Use qapi_enum_parse() in quorum_open()Marc-André Lureau1-19/+9
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20170822132255.23945-12-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Rebased, qemu_opt_get() factored out, commit message tweaked] Cc: Alberto Garcia <berto@igalia.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503564371-26090-9-git-send-email-armbru@redhat.com>
2017-09-04block: Use qemu_enum_parse() in blkdebug_debug_breakpoint()Marc-André Lureau1-20/+8
The error message on invalid blkdebug events changes from qemu-system-x86_64: LOCATION: Invalid event name "VALUE" to qemu-system-x86_64: LOCATION: invalid parameter value: VALUE Slight degradation, but the message is sub-par even before the patch. When complaining about a parameter value, both parameter name and value should be mentioned, as the value may well not be unique. Left for another day. Also left is the error message's unhelpful location: it points to the config=FILENAME rather than into that file. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20170822132255.23945-11-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Rebased, commit message rewritten] Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: qemu-block@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503564371-26090-8-git-send-email-armbru@redhat.com>
2017-09-04qapi: Drop superfluous qapi_enum_parse() parameter maxMarkus Armbruster5-14/+10
The lookup tables have a sentinel, no need to make callers pass their size. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503564371-26090-3-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [Rebased, commit message corrected]
2017-08-31Merge remote-tracking branch 'remotes/elmarco/tags/tidy-pull-request' into ↵Peter Maydell5-7/+7
staging # gpg: Signature made Thu 31 Aug 2017 11:29:33 BST # gpg: using RSA key 0xDAE8E10975969CE5 # gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" # gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5 * remotes/elmarco/tags/tidy-pull-request: (29 commits) eepro100: replace g_malloc()+memcpy() with g_memdup() test-iov: replace g_malloc()+memcpy() with g_memdup() i386: replace g_malloc()+memcpy() with g_memdup() i386: introduce ELF_NOTE_SIZE macro decnumber: use DIV_ROUND_UP kvm: use DIV_ROUND_UP i386/dump: use DIV_ROUND_UP ppc: use DIV_ROUND_UP msix: use DIV_ROUND_UP usb-hub: use DIV_ROUND_UP q35: use DIV_ROUND_UP piix: use DIV_ROUND_UP virtio-serial: use DIV_ROUND_UP console: use DIV_ROUND_UP monitor: use DIV_ROUND_UP virtio-gpu: use DIV_ROUND_UP vga: use DIV_ROUND_UP ui: use DIV_ROUND_UP vnc: use DIV_ROUND_UP vvfat: use DIV_ROUND_UP ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-08-31Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell3-27/+22
staging # gpg: Signature made Thu 31 Aug 2017 09:21:49 BST # gpg: using RSA key 0x9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/block-pull-request: qcow2: allocate cluster_cache/cluster_data on demand qemu-doc: Add UUID support in initiator name tests: migration/guestperf Python 2.6 argparse compatibility docker.py: Python 2.6 argparse compatibility scripts: add argparse module for Python 2.6 compatibility misc: Remove unused Error variables oslib-posix: Print errors before aborting on qemu_alloc_stack() throttle: Test the valid range of config values throttle: Make burst_length 64bit and add range checks throttle: Make LeakyBucket.avg and LeakyBucket.max integer types throttle: Remove throttle_fix_bucket() / throttle_unfix_bucket() throttle: Make throttle_is_valid() a bit less verbose throttle: Update the throttle_fix_bucket() documentation throttle: Fix wrong variable name in the header documentation nvme: Fix get/set number of queues feature, again Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-08-31vvfat: use DIV_ROUND_UPMarc-André Lureau1-2/+2
I used the clang-tidy qemu-round check to generate the fix: https://github.com/elmarco/clang-tools-extra Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2017-08-31vpc: use DIV_ROUND_UPMarc-André Lureau1-2/+2
I used the clang-tidy qemu-round check to generate the fix: https://github.com/elmarco/clang-tools-extra Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2017-08-31qcow2: use DIV_ROUND_UPMarc-André Lureau1-1/+1
I used the clang-tidy qemu-round check to generate the fix: https://github.com/elmarco/clang-tools-extra Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2017-08-31dmg: use DIV_ROUND_UPMarc-André Lureau1-1/+1
I used the clang-tidy qemu-round check to generate the fix: https://github.com/elmarco/clang-tools-extra Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2017-08-31vhdx: use QEMU_ALIGN_DOWNMarc-André Lureau1-1/+1
I used the clang-tidy qemu-round check to generate the fix: https://github.com/elmarco/clang-tools-extra Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
generated by cgit v1.1 at 2024-12-23 20:09:35 +0000