aboutsummaryrefslogtreecommitdiff
path: root/block
AgeCommit message (Collapse)AuthorFilesLines
2018-06-15block: Remove deprecated -drive option serialKevin Wolf1-1/+0
The -drive option serial was deprecated in QEMU 2.10. It's time to remove it. Tests need to be updated to set the serial number with -global instead of using the -drive option. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com>
2018-06-15rbd: New parameter key-secretMarkus Armbruster1-16/+25
Legacy -drive supports "password-secret" parameter that isn't available with -blockdev / blockdev-add. That's because we backed out our first try to provide it there due to interface design doubts, in commit 577d8c9a811, v2.9.0. This is the second try. It brings back the parameter, except it's named "key-secret" now. Let's review our reasons for backing out the first try, as stated in the commit message: * BlockdevOptionsRbd member @password-secret isn't actually a password, it's a key generated by Ceph. Addressed by the rename. * We're not sure where member @password-secret belongs (see the previous commit). See previous commit. * How @password-secret interacts with settings from a configuration file specified with @conf is undocumented. Not actually true, the documentation for @conf says "Values in the configuration file will be overridden by options specified via QAPI", and we've tested this. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-15rbd: New parameter auth-client-requiredMarkus Armbruster1-10/+32
Parameter auth-client-required lets you configure authentication methods. We tried to provide that in v2.9.0, but backed out due to interface design doubts (commit 464444fcc16). This commit is similar to what we backed out, but simpler: we use a list of enumeration values instead of a list of objects with a member of enumeration type. Let's review our reasons for backing out the first try, as stated in the commit message: * The implementation uses deprecated rados_conf_set() key "auth_supported". No biggie. Fixed: we use "auth-client-required". * The implementation makes -drive silently ignore invalid parameters "auth" and "auth-supported.*.X" where X isn't "auth". Fixable (in fact I'm going to fix similar bugs around parameter server), so again no biggie. That fix is commit 2836284db60. This commit doesn't bring the bugs back. * BlockdevOptionsRbd member @password-secret applies only to authentication method cephx. Should it be a variant member of RbdAuthMethod? We've had time to ponder, and we decided to stick to the way Ceph configuration works: the key configured separately, and silently ignored if the authentication method doesn't use it. * BlockdevOptionsRbd member @user could apply to both methods cephx and none, but I'm not sure it's actually used with none. If it isn't, should it be a variant member of RbdAuthMethod? Likewise. * The client offers a *set* of authentication methods, not a list. Should the methods be optional members of BlockdevOptionsRbd instead of members of list @auth-supported? The latter begs the question what multiple entries for the same method mean. Trivial question now that RbdAuthMethod contains nothing but @type, but less so when RbdAuthMethod acquires other members, such the ones discussed above. Again, we decided to stick to the way Ceph configuration works, except we make auth-client-required a list of enumeration values instead of a string containing keywords separated by delimiters. * How BlockdevOptionsRbd member @auth-supported interacts with settings from a configuration file specified with @conf is undocumented. I suspect it's untested, too. Not actually true, the documentation for @conf says "Values in the configuration file will be overridden by options specified via QAPI", and we've tested this. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-15block: Make remaining uses of qobject input visitor more robustMarkus Armbruster2-5/+15
Remaining uses of qobject_input_visitor_new_keyval() in the block subsystem: * block_crypto_open_opts_init() Currently doesn't visit any non-string scalars, thus safe. It's called from - block_crypto_open_luks() Creates the QDict with qemu_opts_to_qdict_filtered(), which creates only string scalars, but has a TODO asking for other types. - qcow_open() - qcow2_open(), qcow2_co_invalidate_cache(), qcow2_reopen_prepare() * block_crypto_create_opts_init(), called from - block_crypto_co_create_opts_luks() Also creates the QDict with qemu_opts_to_qdict_filtered(). * vdi_co_create_opts() Also creates the QDict with qemu_opts_to_qdict_filtered(). Replace these uses by qobject_input_visitor_new_flat_confused() for robustness. This adds crumpling. Right now, that's a no-op, but if we ever extend these things in non-flat ways, crumpling will be needed. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-15block: Factor out qobject_input_visitor_new_flat_confused()Markus Armbruster11-60/+24
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-15block: Clean up a misuse of qobject_to() in .bdrv_co_create_opts()Markus Armbruster6-30/+24
The following pattern occurs in the .bdrv_co_create_opts() methods of parallels, qcow, qcow2, qed, vhdx and vpc: qobj = qdict_crumple_for_keyval_qiv(qdict, errp); qobject_unref(qdict); qdict = qobject_to(QDict, qobj); if (qdict == NULL) { ret = -EINVAL; goto done; } v = qobject_input_visitor_new_keyval(QOBJECT(qdict)); [...] ret = 0; done: qobject_unref(qdict); [...] return ret; If qobject_to() fails, we return failure without setting errp. That's wrong. As far as I can tell, it cannot fail here. Clean it up anyway, by removing the useless conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-15block: Fix -drive for certain non-string scalarsMarkus Armbruster3-30/+6
The previous commit fixed -blockdev breakage due to misuse of the qobject input visitor's keyval flavor in bdrv_file_open(). The commit message explain why using the plain flavor would be just as wrong; it would break -drive. Turns out we break it in three places: nbd_open(), sd_open() and ssh_file_open(). They are even marked FIXME. Example breakage: $ qemu-system-x86 -drive node-name=n1,driver=nbd,server.type=inet,server.host=localhost,server.port=1234,server.numeric=off qemu-system-x86: -drive node-name=n1,driver=nbd,server.type=inet,server.host=localhost,server.port=1234,server.numeric=off: Invalid parameter type for 'numeric', expected: boolean Fix it the same way: replace qdict_crumple() by qdict_crumple_for_keyval_qiv(), and switch from plain to the keyval flavor. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-15block: Fix -blockdev for certain non-string scalarsMarkus Armbruster9-9/+9
Configuration flows through the block subsystem in a rather peculiar way. Configuration made with -drive enters it as QemuOpts. Configuration made with -blockdev / blockdev-add enters it as QAPI type BlockdevOptions. The block subsystem uses QDict, QemuOpts and QAPI types internally. The precise flow is next to impossible to explain (I tried for this commit message, but gave up after wasting several hours). What I can explain is a flaw in the BlockDriver interface that leads to this bug: $ qemu-system-x86_64 -blockdev node-name=n1,driver=nfs,server.type=inet,server.host=localhost,path=/foo/bar,user=1234 qemu-system-x86_64: -blockdev node-name=n1,driver=nfs,server.type=inet,server.host=localhost,path=/foo/bar,user=1234: Internal error: parameter user invalid QMP blockdev-add is broken the same way. Here's what happens. The block layer passes configuration represented as flat QDict (with dotted keys) to BlockDriver methods .bdrv_file_open(). The QDict's members are typed according to the QAPI schema. nfs_file_open() converts it to QAPI type BlockdevOptionsNfs, with qdict_crumple() and a qobject input visitor. This visitor comes in two flavors. The plain flavor requires scalars to be typed according to the QAPI schema. That's the case here. The keyval flavor requires string scalars. That's not the case here. nfs_file_open() uses the latter, and promptly falls apart for members @user, @group, @tcp-syn-count, @readahead-size, @page-cache-size, @debug. Switching to the plain flavor would fix -blockdev, but break -drive, because there the scalars arrive in nfs_file_open() as strings. The proper fix would be to replace the QDict by QAPI type BlockdevOptions in the BlockDriver interface. Sadly, that's beyond my reach right now. Next best would be to fix the block layer to always pass correctly typed QDicts to the BlockDriver methods. Also beyond my reach. What I can do is throw another hack onto the pile: have nfs_file_open() convert all members to string, so use of the keyval flavor actually works, by replacing qdict_crumple() by new function qdict_crumple_for_keyval_qiv(). The pattern "pass result of qdict_crumple() to qobject_input_visitor_new_keyval()" occurs several times more: * qemu_rbd_open() Same issue as nfs_file_open(), but since BlockdevOptionsRbd has only string members, its only a latent bug. Fix it anyway. * parallels_co_create_opts(), qcow_co_create_opts(), qcow2_co_create_opts(), bdrv_qed_co_create_opts(), sd_co_create_opts(), vhdx_co_create_opts(), vpc_co_create_opts() These work, because they create the QDict with qemu_opts_to_qdict_filtered(), which creates only string scalars. The function sports a TODO comment asking for better typing; that's going to be fun. Use qdict_crumple_for_keyval_qiv() to be safe. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-15block: Add block-specific QDict headerMax Reitz17-0/+17
There are numerous QDict functions that have been introduced for and are used only by the block layer. Move their declarations into an own header file to reflect that. While qdict_extract_subqdict() is in fact used outside of the block layer (in util/qemu-config.c), it is still a function related very closely to how the block layer works with nested QDicts, namely by sometimes flattening them. Therefore, its declaration is put into this header as well and util/qemu-config.c includes it with a comment stating exactly which function it needs. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Message-Id: <20180509165530.29561-7-mreitz@redhat.com> [Copyright note tweaked, superfluous includes dropped] Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-15iscsi: Drop deprecated -drive parameter "filename"Markus Armbruster1-21/+2
Parameter "filename" is deprecated since commit 5c3ad1a6a8f, v2.10.0. Time to get rid of it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-15rbd: Drop deprecated -drive parameter "filename"Markus Armbruster1-16/+0
Parameter "filename" is deprecated since commit 91589d9e5ca, v2.10.0. Time to get rid of it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-11qapi: add x-block-dirty-bitmap-mergeVladimir Sementsov-Ogievskiy1-0/+18
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-id: 20180606182449.1607-5-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-11block/dirty-bitmap: add lock to bdrv_enable/disable_dirty_bitmapVladimir Sementsov-Ogievskiy1-2/+4
Add locks and remove comments about BQL accordingly to dirty_bitmap_mutex definition in block_int.h. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-id: 20180606182449.1607-2-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-11block: simplify code around releasing bitmapsPaolo Bonzini1-52/+32
QLIST_REMOVE does not require walking the list, and once the "bitmap" argument is removed from bdrv_do_release_matching_dirty_bitmap_locked the code simplifies a lot and it is worth inlining everything in the callers of bdrv_do_release_matching_dirty_bitmap. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 20180326104037.6894-1-pbonzini@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-11block: remove bdrv_dirty_bitmap_make_anonPaolo Bonzini1-9/+0
All this function is doing will be repeated by bdrv_do_release_matching_dirty_bitmap_locked, except resetting bm->persistent. But even that does not matter because the bitmap will be freed. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20180323164254.26487-1-pbonzini@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-11qcow2: Do not mark inactive images corruptMax Reitz1-1/+1
When signaling a corruption on a read-only image, qcow2 already makes fatal events non-fatal (i.e., they will not result in the image being closed, and the image header's corrupt flag will not be set). This is necessary because we cannot set the corrupt flag on read-only images, and it is possible because further corruption of read-only images is impossible. Inactive images are effectively read-only, too, so we should do the same for them. bdrv_is_writable() can tell us whether an image can actually be written to, so use its result instead of !bs->read_only. (Otherwise, the assert(!(bs->open_flags & BDRV_O_INACTIVE)) in bdrv_co_pwritev() will fail, crashing qemu.) Cc: qemu-stable@nongnu.org Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20180606193702.7113-3-mreitz@redhat.com Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-06-11throttle: Fix crash on reopenAlberto Garcia1-21/+33
The throttle block filter can be reopened, and with this it is possible to change the throttle group that the filter belongs to. The way the code does that is the following: - On throttle_reopen_prepare(): create a new ThrottleGroupMember and attach it to the new throttle group. - On throttle_reopen_commit(): detach the old ThrottleGroupMember, delete it and replace it with the new one. The problem with this is that by replacing the ThrottleGroupMember the previous value of io_limits_disabled is lost, causing an assertion failure in throttle_co_drain_end(). This problem can be reproduced by reopening a throttle node: $QEMU -monitor stdio -object throttle-group,id=tg0,x-iops-total=1000 \ -blockdev node-name=hd0,driver=qcow2,file.driver=file,file.filename=hd.qcow2 \ -blockdev node-name=root,driver=throttle,throttle-group=tg0,file=hd0,read-only=on (qemu) block_stream root block/throttle.c:214: throttle_co_drain_end: Assertion `tgm->io_limits_disabled' failed. Since we only want to change the throttle group on reopen there's no need to create a ThrottleGroupMember and discard the old one. It's easier if we simply detach it from its current group and attach it to the new one. Signed-off-by: Alberto Garcia <berto@igalia.com> Message-id: 20180608151536.7378-1-berto@igalia.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-06-11block/qcow2-bitmap: fix free_bitmap_clustersVladimir Sementsov-Ogievskiy1-1/+0
This assert may fail, because bitmap_table is not initialized. Just drop it, as it's obvious, that bitmap_table_load sets bitmap_table parameter only when returning zero. Reported-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 20180608101225.2575-1-vsementsov@virtuozzo.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-06-11qcow2: Repair OFLAG_COPIED when fixing leaksMax Reitz1-8/+17
Repairing OFLAG_COPIED is usually safe because it is done after the refcounts have been repaired. Therefore, it we did not find anyone else referencing a data or L2 cluster, it makes no sense to not set OFLAG_COPIED -- and the other direction (clearing OFLAG_COPIED) is always safe, anyway, it may just induce leaks. Furthermore, if OFLAG_COPIED is actually consistent with a wrong (leaky) refcount, we will decrement the refcount with -r leaks, but OFLAG_COPIED will then be wrong. qemu-img check should not produce images that are more corrupted afterwards then they were before. Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1527085 Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20180509200059.31125-2-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-06-11block: Add Error parameter to bdrv_amend_optionsMax Reitz1-31/+41
Looking at the qcow2 code that is riddled with error_report() calls, this is really how it should have been from the start. Along the way, turn the target_version/current_version comparisons at the beginning of qcow2_downgrade() into assertions (the caller has to make sure these conditions are met), and rephrase the error message on using compat=1.1 to get refcount widths other than 16 bits. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20180509210023.20283-3-mreitz@redhat.com Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-06-11block/file-posix: File locking during creationMax Reitz1-2/+35
When creating a file, we should take the WRITE and RESIZE permissions. We do not need either for the creation itself, but we do need them for clearing and resizing it. So we can take the proper permissions by replacing O_TRUNC with an explicit truncation to 0, and by taking the appropriate file locks between those two steps. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20180509215336.31304-3-mreitz@redhat.com Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-06-11block/file-posix: Pass FD to locking helpersMax Reitz1-13/+14
raw_apply_lock_bytes() and raw_check_lock_bytes() currently take a BDRVRawState *, but they only use the lock_fd field. During image creation, we do not have a BDRVRawState, but we do have an FD; so if we want to reuse the functions there, we should modify them to receive only the FD. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 20180509215336.31304-2-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-06-05sheepdog: remove huge BSS objectPaolo Bonzini1-10/+12
block/sheepdog.o has a 4M static variable that is 90% of QEMU's whole .bss section. Replace it with a heap-allocated block, and make it smaller too since only the inode header is actually being used. bss size goes down from 4464280 to 269976. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20180523160721.14018-3-pbonzini@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com>
2018-06-05sheepdog: cleanup repeated expressionPaolo Bonzini1-3/+3
The expression "SD_INODE_SIZE - sizeof(inode.data_vdi_id)" already has a macro defined for the same value (though with a nicer definition using offsetof). Replace it. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20180523160721.14018-2-pbonzini@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com>
2018-06-04Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell6-95/+757
staging Pull request * Copy offloading for qemu-img convert (iSCSI, raw, and qcow2) If the underlying storage supports copy offloading, qemu-img convert will use it instead of performing reads and writes. This avoids data transfers and thus frees up storage bandwidth for other purposes. SCSI EXTENDED COPY and Linux copy_file_range(2) are used to implement this optimization. * Drop spurious "WARNING: I\/O thread spun for 1000 iterations" warning # gpg: Signature made Mon 04 Jun 2018 12:20:08 BST # gpg: using RSA key 9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/block-pull-request: main-loop: drop spin_counter qemu-img: Convert with copy offloading block-backend: Add blk_co_copy_range iscsi: Implement copy offloading iscsi: Create and use iscsi_co_wait_for_task iscsi: Query and save device designator when opening file-posix: Implement bdrv_co_copy_range qcow2: Implement copy offloading raw: Implement copy offloading raw: Check byte range uniformly block: Introduce API for copy offloading Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-04Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell11-12/+12
acpi, vhost, misc: fixes, features vDPA support, fix to vhost blk RO bit handling, some include path cleanups, NFIT ACPI table. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri 01 Jun 2018 17:25:19 BST # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (31 commits) vhost-blk: turn on pre-defined RO feature bit ACPI testing: test NFIT platform capabilities nvdimm, acpi: support NFIT platform capabilities tests/.gitignore: add entry for generated file arch_init: sort architectures ui: use local path for local headers qga: use local path for local headers colo: use local path for local headers migration: use local path for local headers usb: use local path for local headers sd: fix up include vhost-scsi: drop an unused include ppc: use local path for local headers rocker: drop an unused include e1000e: use local path for local headers ioapic: fix up includes ide: use local path for local headers display: use local path for local headers trace: use local path for local headers migration: drop an unused include ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-01block-backend: Add blk_co_copy_rangeFam Zheng1-0/+18
It's a BlockBackend wrapper of the BDS interface. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20180601092648.24614-10-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-06-01iscsi: Implement copy offloadingFam Zheng1-0/+219
Issue EXTENDED COPY (LID1) command to implement the copy_range API. The parameter data construction code is modified from libiscsi's iscsi-dd.c. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20180601092648.24614-9-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-06-01iscsi: Create and use iscsi_co_wait_for_taskFam Zheng1-37/+17
This loop is repeated a growing number times. Make a helper. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20180601092648.24614-8-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-06-01iscsi: Query and save device designator when openingFam Zheng1-0/+41
The device designator data returned in INQUIRY command will be useful to fill in source/target fields during copy offloading. Do this when connecting to the target and save the data for later use. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20180601092648.24614-7-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-06-01file-posix: Implement bdrv_co_copy_rangeFam Zheng1-3/+95
With copy_file_range(2), we can implement the bdrv_co_copy_range semantics. Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 20180601092648.24614-6-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-06-01qcow2: Implement copy offloadingFam Zheng1-30/+199
The two callbacks are implemented quite similarly to the read/write functions: bdrv_co_copy_range_from maps for read and calls into bs->file or bs->backing depending on the allocation status; bdrv_co_copy_range_to maps for write and calls into bs->file. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 20180601092648.24614-5-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-06-01raw: Implement copy offloadingFam Zheng1-0/+32
Just pass down to ->file. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20180601092648.24614-4-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-06-01raw: Check byte range uniformlyFam Zheng1-25/+39
We don't verify the request range against s->size in the I/O callbacks except for raw_co_pwritev. This is inconsistent (especially for raw_co_pwrite_zeroes and raw_co_pdiscard), so fix them, in the meanwhile make the helper reusable by the coming new callbacks. Note that in most cases the block layer already verifies the request byte range against our reported image length, before invoking the driver callbacks. The exception is during image creating, after blk_set_allow_write_beyond_eof(blk, true) is called. But in that case, the requests are not directly from the user or guest. So there is no visible behavior change in adding the check code. The int64_t -> uint64_t inconsistency, as shown by the type casting, is pre-existing due to the interface. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 20180601092648.24614-3-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-06-01block: Introduce API for copy offloadingFam Zheng1-0/+97
Introduce the bdrv_co_copy_range() API for copy offloading. Block drivers implementing this API support efficient copy operations that avoid reading each block from the source device and writing it to the destination devices. Examples of copy offload primitives are SCSI EXTENDED COPY and Linux copy_file_range(2). Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20180601092648.24614-2-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-05-31block: use local path for local headersMichael S. Tsirkin11-12/+12
When pulling in headers that are in the same directory as the C file (as opposed to one in include/), we should use its relative path, without a directory. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-05-30block/create: Mark blockdev-create stableKevin Wolf1-2/+2
We're ready to declare the blockdev-create job stable. This renames the corresponding QMP command from x-blockdev-create to blockdev-create. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com>
2018-05-30block/create: Make x-blockdev-create a jobKevin Wolf1-21/+46
This changes the x-blockdev-create QMP command so that it doesn't block the monitor and the main loop any more, but starts a background job that performs the image creation. The basic job as implemented here is all that is necessary to make image creation asynchronous and to provide a QMP interface that can be marked stable, but it still lacks a few features that jobs usually provide: The job will ignore pause commands and it doesn't publish more than very basic progress yet (total-progress is 1 and current-progress advances from 0 to 1 when the driver callbacks returns). These features can be added later without breaking compatibility. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com>
2018-05-30job: Add error message for failing jobsKevin Wolf4-4/+4
So far we relied on job->ret and strerror() to produce an error message for failed jobs. Not surprisingly, this tends to result in completely useless messages. This adds a Job.error field that can contain an error string for a failing job, and a parameter to job_completed() that sets the field. As a default, if NULL is passed, we continue to use strerror(job->ret). All existing callers are changed to pass NULL. They can be improved in separate patches. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com>
2018-05-29vhdx: Fix vhdx_co_create() return valueKevin Wolf1-1/+1
.bdrv_co_create() is supposed to return 0 on success, but vhdx could return a positive value instead. Fix this. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com>
2018-05-29vdi: Fix vdi_co_do_create() return valueKevin Wolf1-0/+1
.bdrv_co_create() is supposed to return 0 on success, but vdi could return a positive value instead. Fix this. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com>
2018-05-29qcow2: Fix Coverity warning when calculating the refcount cache sizeAlberto Garcia1-3/+2
MIN_REFCOUNT_CACHE_SIZE is 4 and the cluster size is guaranteed to be at most 2MB, so the minimum refcount cache size (in bytes) is always going to fit in a 32-bit integer. Coverity doesn't know that, and since we're storing the result in a uint64_t (*refcount_cache_size) it thinks that we need the 64 bits and that we probably want to do a 64-bit multiplication to prevent the result from being truncated. This is a false positive in this case, but it's a fair warning. We could do a 64-bit multiplication to get rid of it, but since we know that a 32-bit variable is enough to store this value let's simply reuse min_refcount_cache, make it a normal int and stop doing casts. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-05-23job: Move progress fields to JobKevin Wolf4-10/+10
BlockJob has fields .offset and .len, which are actually misnomers today because they are no longer tied to block device sizes, but just progress counters. As such they make a lot of sense in generic Jobs. This patch moves the fields to Job and renames them to .progress_current and .progress_total to describe their function better. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23job: Add job_transition_to_ready()Kevin Wolf1-3/+3
The transition to the READY state was still performed in the BlockJob layer, in the same function that sent the BLOCK_JOB_READY QMP event. This patch brings the state transition to the Job layer and implements the QMP event using a notifier called from the Job layer, like we already do for other events related to state transitions. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23job: Add job_yield()Kevin Wolf2-2/+2
This moves block_job_yield() to the Job layer. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23job: Move completion and cancellation to JobKevin Wolf6-14/+10
This moves the top-level job completion and cancellation functions from BlockJob to Job. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-05-23job: Switch transactions to JobTxnKevin Wolf1-1/+1
This doesn't actually move any transaction code to Job yet, but it renames the type for transactions from BlockJobTxn to JobTxn and makes them contain Jobs rather than BlockJobs Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23job: Move job_finish_sync() to JobKevin Wolf1-3/+3
block_job_finish_sync() doesn't contain anything block job specific any more, so it can be moved to Job. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23job: Move .complete callback to JobKevin Wolf1-5/+5
This moves the .complete callback that tells a READY job to complete from BlockJobDriver to JobDriver. The wrapper function job_complete() doesn't require anything block job specific any more and can be moved to Job. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23job: Add job_drain()Kevin Wolf4-0/+5
block_job_drain() contains a blk_drain() call which cannot be moved to Job, so add a new JobDriver callback JobDriver.drain which has a common implementation for all BlockJobs. In addition to this we keep the existing BlockJobDriver.drain callback that is called by the common drain implementation for all block jobs. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
generated by cgit v1.1 at 2025-01-14 23:44:19 +0000