aboutsummaryrefslogtreecommitdiff
path: root/block
AgeCommit message (Collapse)AuthorFilesLines
2017-07-11qcow2: extract image creation option parsingStefan Hajnoczi1-36/+73
The image creation options parsed by qcow2_create() are also needed to implement .bdrv_measure(). Extract the parsing code, including input validation. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-id: 20170705125738.8777-6-stefanha@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11qcow2: make refcount size calculation conservativeStefan Hajnoczi1-41/+42
The refcount metadata size calculation is inaccurate and can produce numbers that are too small. This is bad because we should calculate a conservative number - one that is guaranteed to be large enough. This patch switches the approach to a fixed point calculation because the existing equation is hard to solve when inaccuracies are taken care of. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-id: 20170705125738.8777-5-stefanha@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11qcow2: extract preallocation calculation functionStefan Hajnoczi1-59/+77
Calculating the preallocated image size will be needed to implement .bdrv_measure(). Extract the code out into a separate function. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-id: 20170705125738.8777-4-stefanha@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11raw-format: add bdrv_measure() supportStefan Hajnoczi1-0/+26
Maximum size calculation is trivial for the raw format: it's just the requested image size (because there is no metadata). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-id: 20170705125738.8777-3-stefanha@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11block: release persistent bitmaps on inactivateVladimir Sementsov-Ogievskiy1-6/+23
We should release them here to reload on invalidate cache. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 20170628120530.31251-31-vsementsov@virtuozzo.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11qcow2: add .bdrv_remove_persistent_dirty_bitmapVladimir Sementsov-Ogievskiy3-0/+45
Realize .bdrv_remove_persistent_dirty_bitmap interface. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 20170628120530.31251-29-vsementsov@virtuozzo.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11block/dirty-bitmap: add bdrv_remove_persistent_dirty_bitmapVladimir Sementsov-Ogievskiy1-0/+18
Interface for removing persistent bitmap from its storage. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 20170628120530.31251-28-vsementsov@virtuozzo.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11qmp: add x-debug-block-dirty-bitmap-sha256Vladimir Sementsov-Ogievskiy1-0/+5
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 20170628120530.31251-26-vsementsov@virtuozzo.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11qcow2: add .bdrv_can_store_new_dirty_bitmapVladimir Sementsov-Ogievskiy3-0/+56
Realize .bdrv_can_store_new_dirty_bitmap interface. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 20170628120530.31251-23-vsementsov@virtuozzo.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11qcow2: store bitmaps on reopening image as read-onlyVladimir Sementsov-Ogievskiy3-0/+28
Store bitmaps and mark them read-only on reopening image as read-only. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 20170628120530.31251-21-vsementsov@virtuozzo.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11qcow2: add persistent dirty bitmaps supportVladimir Sementsov-Ogievskiy3-0/+486
Store persistent dirty bitmaps in qcow2 image. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 20170628120530.31251-20-vsementsov@virtuozzo.com [mreitz: Always assign ret in store_bitmap() in case of an error] Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11block/dirty-bitmap: add bdrv_dirty_bitmap_next()Vladimir Sementsov-Ogievskiy1-0/+7
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 20170628120530.31251-19-vsementsov@virtuozzo.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11block: introduce persistent dirty bitmapsVladimir Sementsov-Ogievskiy2-0/+30
New field BdrvDirtyBitmap.persistent means, that bitmap should be saved by format driver in .bdrv_close and .bdrv_inactivate. No format driver supports it for now. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 20170628120530.31251-18-vsementsov@virtuozzo.com [mreitz: Fixed indentation] Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11block/dirty-bitmap: add autoload field to BdrvDirtyBitmapVladimir Sementsov-Ogievskiy2-0/+20
Mirror AUTO flag from Qcow2 bitmap in BdrvDirtyBitmap. This will be needed in future, to save this flag back to Qcow2 for persistent bitmaps. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 20170628120530.31251-16-vsementsov@virtuozzo.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11qcow2: support .bdrv_reopen_bitmaps_rwVladimir Sementsov-Ogievskiy3-0/+64
Realize bdrv_reopen_bitmaps_rw interface. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 20170628120530.31251-15-vsementsov@virtuozzo.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11qcow2: autoloading dirty bitmapsVladimir Sementsov-Ogievskiy3-2/+406
Auto loading bitmaps are bitmaps in Qcow2, with the AUTO flag set. They are loaded when the image is opened and become BdrvDirtyBitmaps for the corresponding drive. Extra data in bitmaps is not supported for now. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 20170628120530.31251-12-vsementsov@virtuozzo.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11block/dirty-bitmap: add readonly field to BdrvDirtyBitmapVladimir Sementsov-Ogievskiy2-0/+44
It will be needed in following commits for persistent bitmaps. If bitmap is loaded from read-only storage (and we can't mark it "in use" in this storage) corresponding BdrvDirtyBitmap should be read-only. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 20170628120530.31251-11-vsementsov@virtuozzo.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11block/dirty-bitmap: fix comment for BlockDirtyBitmap.disabled fieldVladimir Sementsov-Ogievskiy1-1/+2
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 20170628120530.31251-10-vsementsov@virtuozzo.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11qcow2: add bitmaps extensionVladimir Sementsov-Ogievskiy5-6/+593
Add bitmap extension as specified in docs/specs/qcow2.txt. For now, just mirror extension header into Qcow2 state and check constraints. Also, calculate refcounts for qcow2 bitmaps, to not break qemu-img check. For now, disable image resize if it has bitmaps. It will be fixed later. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 20170628120530.31251-9-vsementsov@virtuozzo.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11qcow2-refcount: rename inc_refcounts() and make it publicVladimir Sementsov-Ogievskiy2-28/+35
This is needed for the following patch, which will introduce refcounts checking for qcow2 bitmaps. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 20170628120530.31251-8-vsementsov@virtuozzo.com [mreitz: s/inc_refcounts/qcow2_inc_refcounts_imrt/ in one more (new) place] Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11block/dirty-bitmap: add deserialize_ones funcVladimir Sementsov-Ogievskiy1-0/+7
Add bdrv_dirty_bitmap_deserialize_ones() function, which is needed for qcow2 bitmap loading, to handle unallocated bitmap parts, marked as all-ones. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 20170628120530.31251-7-vsementsov@virtuozzo.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11block: fix bdrv_dirty_bitmap_granularity signatureVladimir Sementsov-Ogievskiy1-1/+1
Make getter signature const-correct. This allows other functions with const dirty bitmap parameter use bdrv_dirty_bitmap_granularity(). Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 20170628120530.31251-6-vsementsov@virtuozzo.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11qcow2: report encryption specific image informationDaniel P. Berrange1-1/+31
Currently 'qemu-img info' reports a simple "encrypted: yes" field. This is not very useful now that qcow2 can support multiple encryption formats. Users want to know which format is in use and some data related to it. Wire up usage of the qcrypto_block_get_info() method so that 'qemu-img info' can report about the encryption format and parameters in use $ qemu-img create \ --object secret,id=sec0,data=123456 \ -o encrypt.format=luks,encrypt.key-secret=sec0 \ -f qcow2 demo.qcow2 1G Formatting 'demo.qcow2', fmt=qcow2 size=1073741824 \ encryption=off encrypt.format=luks encrypt.key-secret=sec0 \ cluster_size=65536 lazy_refcounts=off refcount_bits=16 $ qemu-img info demo.qcow2 image: demo.qcow2 file format: qcow2 virtual size: 1.0G (1073741824 bytes) disk size: 480K encrypted: yes cluster_size: 65536 Format specific information: compat: 1.1 lazy refcounts: false refcount bits: 16 encrypt: ivgen alg: plain64 hash alg: sha256 cipher alg: aes-256 uuid: 3fa930c4-58c8-4ef7-b3c5-314bb5af21f3 format: luks cipher mode: xts slots: [0]: active: true iters: 1839058 key offset: 4096 stripes: 4000 [1]: active: false key offset: 262144 [2]: active: false key offset: 520192 [3]: active: false key offset: 778240 [4]: active: false key offset: 1036288 [5]: active: false key offset: 1294336 [6]: active: false key offset: 1552384 [7]: active: false key offset: 1810432 payload offset: 2068480 master key iters: 438487 corrupt: false With the legacy "AES" encryption we just report the format name $ qemu-img create \ --object secret,id=sec0,data=123456 \ -o encrypt.format=aes,encrypt.key-secret=sec0 \ -f qcow2 demo.qcow2 1G Formatting 'demo.qcow2', fmt=qcow2 size=1073741824 \ encryption=off encrypt.format=aes encrypt.key-secret=sec0 \ cluster_size=65536 lazy_refcounts=off refcount_bits=16 $ ./qemu-img info demo.qcow2 image: demo.qcow2 file format: qcow2 virtual size: 1.0G (1073741824 bytes) disk size: 196K encrypted: yes cluster_size: 65536 Format specific information: compat: 1.1 lazy refcounts: false refcount bits: 16 encrypt: format: aes corrupt: false Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-20-berrange@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11block: pass option prefix down to crypto layerDaniel P. Berrange3-9/+10
While the crypto layer uses a fixed option name "key-secret", the upper block layer may have a prefix on the options. e.g. "encrypt.key-secret", in order to avoid clashes between crypto option names & other block option names. To ensure the crypto layer can report accurate error messages, we must tell it what option name prefix was used. Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-19-berrange@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11block: remove all encryption handling APIsDaniel P. Berrange4-4/+8
Now that all encryption keys must be provided upfront via the QCryptoSecret API and associated block driver properties there is no need for any explicit encryption handling APIs in the block layer. Encryption can be handled transparently within the block driver. We only retain an API for querying whether an image is encrypted or not, since that is a potentially useful piece of metadata to report to the user. Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-18-berrange@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11qcow2: add support for LUKS encryption formatDaniel P. Berrange4-36/+265
This adds support for using LUKS as an encryption format with the qcow2 file, using the new encrypt.format parameter to request "luks" format. e.g. # qemu-img create --object secret,data=123456,id=sec0 \ -f qcow2 -o encrypt.format=luks,encrypt.key-secret=sec0 \ test.qcow2 10G The legacy "encryption=on" parameter still results in creation of the old qcow2 AES format (and is equivalent to the new 'encryption-format=aes'). e.g. the following are equivalent: # qemu-img create --object secret,data=123456,id=sec0 \ -f qcow2 -o encryption=on,encrypt.key-secret=sec0 \ test.qcow2 10G # qemu-img create --object secret,data=123456,id=sec0 \ -f qcow2 -o encryption-format=aes,encrypt.key-secret=sec0 \ test.qcow2 10G With the LUKS format it is necessary to store the LUKS partition header and key material in the QCow2 file. This data can be many MB in size, so cannot go into the QCow2 header region directly. Thus the spec defines a FDE (Full Disk Encryption) header extension that specifies the offset of a set of clusters to hold the FDE headers, as well as the length of that region. The LUKS header is thus stored in these extra allocated clusters before the main image payload. Aside from all the cryptographic differences implied by use of the LUKS format, there is one further key difference between the use of legacy AES and LUKS encryption in qcow2. For LUKS, the initialiazation vectors are generated using the host physical sector as the input, rather than the guest virtual sector. This guarantees unique initialization vectors for all sectors when qcow2 internal snapshots are used, thus giving stronger protection against watermarking attacks. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-14-berrange@redhat.com Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11qcow2: convert QCow2 to use QCryptoBlock for encryptionDaniel P. Berrange3-120/+158
This converts the qcow2 driver to make use of the QCryptoBlock APIs for encrypting image content, using the legacy QCow2 AES scheme. With this change it is now required to use the QCryptoSecret object for providing passwords, instead of the current block password APIs / interactive prompting. $QEMU \ -object secret,id=sec0,file=/home/berrange/encrypted.pw \ -drive file=/home/berrange/encrypted.qcow2,encrypt.key-secret=sec0 The test 087 could be simplified since there is no longer a difference in behaviour when using blockdev_add with encrypted images for the running vs stopped CPU state. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-12-berrange@redhat.com Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11qcow2: make qcow2_encrypt_sectors encrypt in placeDaniel P. Berrange3-15/+9
Instead of requiring separate input/output buffers for encrypting data, change qcow2_encrypt_sectors() to assume use of a single buffer, encrypting in place. The current callers all used the same buffer for input/output already. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-11-berrange@redhat.com Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11qcow: convert QCow to use QCryptoBlock for encryptionDaniel P. Berrange3-107/+121
This converts the qcow driver to make use of the QCryptoBlock APIs for encrypting image content. This is only wired up to permit use of the legacy QCow encryption format. Users who wish to have the strong LUKS format should switch to qcow2 instead. With this change it is now required to use the QCryptoSecret object for providing passwords, instead of the current block password APIs / interactive prompting. $QEMU \ -object secret,id=sec0,file=/home/berrange/encrypted.pw \ -drive file=/home/berrange/encrypted.qcow,encrypt.format=aes,\ encrypt.key-secret=sec0 Though note that running QEMU system emulators with the AES encryption is no longer supported, so while the above syntax is valid, QEMU will refuse to actually run the VM in this particular example. Likewise when creating images with the legacy AES-CBC format qemu-img create -f qcow \ --object secret,id=sec0,file=/home/berrange/encrypted.pw \ -o encrypt.format=aes,encrypt.key-secret=sec0 \ /home/berrange/encrypted.qcow 64M Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-10-berrange@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11qcow: make encrypt_sectors encrypt in placeDaniel P. Berrange1-30/+15
Instead of requiring separate input/output buffers for encrypting data, change encrypt_sectors() to assume use of a single buffer, encrypting in place. One current caller uses the same buffer for input/output already and the other two callers are easily converted to do so. Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-9-berrange@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11block: deprecate "encryption=on" in favor of "encrypt.format=aes"Daniel P. Berrange2-13/+52
Historically the qcow & qcow2 image formats supported a property "encryption=on" to enable their built-in AES encryption. We'll soon be supporting LUKS for qcow2, so need a more general purpose way to enable encryption, with a choice of formats. This introduces an "encrypt.format" option, which will later be joined by a number of other "encrypt.XXX" options. The use of a "encrypt." prefix instead of "encrypt-" is done to facilitate mapping to a nested QAPI schema at later date. e.g. the preferred syntax is now qemu-img create -f qcow2 -o encrypt.format=aes demo.qcow2 Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-8-berrange@redhat.com Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11qcow: require image size to be > 1 for new imagesDaniel P. Berrange1-0/+6
The qcow driver refuses to open images which are less than 2 bytes in size, but will happily create such images. Add a check in the create path to avoid this discrepancy. Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-5-berrange@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11block: add ability to set a prefix for opt namesDaniel P. Berrange2-28/+28
When integrating the crypto support with qcow/qcow2, we don't want to use the bare LUKS option names "hash-alg", "key-secret", etc. We need to namespace them to match the nested QAPI schema. e.g. "encrypt.hash-alg", "encrypt.key-secret" so that they don't clash with any general qcow options at a later date. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-3-berrange@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11block: expose crypto option names / defs to other driversDaniel P. Berrange2-56/+117
The block/crypto.c defines a set of QemuOpts that provide parameters for encryption. This will also be needed by the qcow/qcow2 integration, so expose the relevant pieces in a new block/crypto.h header. Some helper methods taking QemuOpts are changed to take QDict to simplify usage in other places. Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-2-berrange@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-10block: Make bdrv_is_allocated_above() byte-basedEric Blake5-52/+54
We are gradually moving away from sector-based interfaces, towards byte-based. In the common case, allocation is unlikely to ever use values that are not naturally sector-aligned, but it is possible that byte-based values will let us be more precise about allocation at the end of an unaligned file that can do byte-based access. Changing the signature of the function to use int64_t *pnum ensures that the compiler enforces that all callers are updated. For now, the io.c layer still assert()s that all callers are sector-aligned, but that can be relaxed when a later patch implements byte-based block status. Therefore, for the most part this patch is just the addition of scaling at the callers followed by inverse scaling at bdrv_is_allocated(). But some code, particularly stream_run(), gets a lot simpler because it no longer has to mess with sectors. Leave comments where we can further simplify by switching to byte-based iterations, once later patches eliminate the need for sector-aligned operations. For ease of review, bdrv_is_allocated() was tackled separately. Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10block: Minimize raw use of bds->total_sectorsEric Blake1-8/+6
bdrv_is_allocated_above() was relying on intermediate->total_sectors, which is a field that can have stale contents depending on the value of intermediate->has_variable_length. An audit shows that we are safe (we were first calling through bdrv_co_get_block_status() which in turn calls bdrv_nb_sectors() and therefore just refreshed the current length), but it's nicer to favor our accessor functions to avoid having to repeat such an audit, even if it means refresh_total_sectors() is called more frequently. Suggested-by: John Snow <jsnow@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Manos Pitsidianakis <el13635@mail.ntua.gr> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10block: Make bdrv_is_allocated() byte-basedEric Blake5-58/+75
We are gradually moving away from sector-based interfaces, towards byte-based. In the common case, allocation is unlikely to ever use values that are not naturally sector-aligned, but it is possible that byte-based values will let us be more precise about allocation at the end of an unaligned file that can do byte-based access. Changing the signature of the function to use int64_t *pnum ensures that the compiler enforces that all callers are updated. For now, the io.c layer still assert()s that all callers are sector-aligned on input and that *pnum is sector-aligned on return to the caller, but that can be relaxed when a later patch implements byte-based block status. Therefore, this code adds usages like DIV_ROUND_UP(,BDRV_SECTOR_SIZE) to callers that still want aligned values, where the call might reasonbly give non-aligned results in the future; on the other hand, no rounding is needed for callers that should just continue to work with byte alignment. For the most part this patch is just the addition of scaling at the callers followed by inverse scaling at bdrv_is_allocated(). But some code, particularly bdrv_commit(), gets a lot simpler because it no longer has to mess with sectors; also, it is now possible to pass NULL if the caller does not care how much of the image is allocated beyond the initial offset. Leave comments where we can further simplify once a later patch eliminates the need for sector-aligned requests through bdrv_is_allocated(). For ease of review, bdrv_is_allocated_above() will be tackled separately. Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10backup: Switch backup_run() to byte-basedEric Blake1-17/+15
We are gradually converting to byte-based interfaces, as they are easier to reason about than sector-based. Change the internal loop iteration of backups to track by bytes instead of sectors (although we are still guaranteed that we iterate by steps that are cluster-aligned). Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10backup: Switch backup_do_cow() to byte-basedEric Blake1-36/+26
We are gradually converting to byte-based interfaces, as they are easier to reason about than sector-based. Convert another internal function (no semantic change). Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10backup: Switch block_backup.h to byte-basedEric Blake2-20/+23
We are gradually converting to byte-based interfaces, as they are easier to reason about than sector-based. Continue by converting the public interface to backup jobs (no semantic change), including a change to CowRequest to track by bytes instead of cluster indices. Note that this does not change the difference between the public interface (starting point, and size of the subsequent range) and the internal interface (starting and end points). Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Xie Changlong <xiechanglong@cmss.chinamobile.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10backup: Switch BackupBlockJob to byte-basedEric Blake1-18/+15
We are gradually converting to byte-based interfaces, as they are easier to reason about than sector-based. Continue by converting an internal structure (no semantic change), and all references to tracking progress. Drop a redundant local variable bytes_per_cluster. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10block: Drop unused bdrv_round_sectors_to_clusters()Eric Blake1-21/+0
Now that the last user [mirror_iteration()] has converted to using bytes, we no longer need a function to round sectors to clusters. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10mirror: Switch mirror_iteration() to byte-basedEric Blake1-59/+46
We are gradually converting to byte-based interfaces, as they are easier to reason about than sector-based. Change the internal loop iteration of mirroring to track by bytes instead of sectors (although we are still guaranteed that we iterate by steps that are both sector-aligned and multiples of the granularity). Drop the now-unused mirror_clip_sectors(). Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10mirror: Switch mirror_do_read() to byte-basedEric Blake1-41/+33
We are gradually converting to byte-based interfaces, as they are easier to reason about than sector-based. Convert another internal function, preserving all existing semantics, and adding one more assertion that things are still sector-aligned (so that conversions to sectors in mirror_read_complete don't need to round). Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10mirror: Switch mirror_cow_align() to byte-basedEric Blake1-26/+37
We are gradually converting to byte-based interfaces, as they are easier to reason about than sector-based. Convert another internal function (no semantic change), and add mirror_clip_bytes() as a counterpart to mirror_clip_sectors(). Some of the conversion is a bit tricky, requiring temporaries to convert between units; it will be cleared up in a following patch. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10mirror: Update signature of mirror_clip_sectors()Eric Blake1-7/+8
Rather than having a void function that modifies its input in-place as the output, change the signature to reduce a layer of indirection and return the result. Suggested-by: John Snow <jsnow@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10mirror: Switch mirror_do_zero_or_discard() to byte-basedEric Blake1-9/+11
We are gradually converting to byte-based interfaces, as they are easier to reason about than sector-based. Convert another internal function (no semantic change). Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10mirror: Switch MirrorBlockJob to byte-basedEric Blake1-42/+42
We are gradually converting to byte-based interfaces, as they are easier to reason about than sector-based. Continue by converting an internal structure (no semantic change), and all references to the buffer size. Add an assertion that our use of s->granularity >> BDRV_SECTOR_BITS (necessary for interaction with sector-based dirty bitmaps, until a later patch converts those to be byte-based) does not suffer from truncation problems. [checkpatch has a false positive on use of MIN() in this patch] Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10commit: Switch commit_run() to byte-basedEric Blake1-10/+6
We are gradually converting to byte-based interfaces, as they are easier to reason about than sector-based. Change the internal loop iteration of committing to track by bytes instead of sectors (although we are still guaranteed that we iterate by steps that are sector-aligned). Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10commit: Switch commit_populate() to byte-basedEric Blake1-7/+8
We are gradually converting to byte-based interfaces, as they are easier to reason about than sector-based. Start by converting an internal function (no semantic change). Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>