aboutsummaryrefslogtreecommitdiff
path: root/block/vvfat.c
AgeCommit message (Collapse)AuthorFilesLines
2017-07-17vvfat: make it thread-safePaolo Bonzini1-1/+7
Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20170629132749.997-6-pbonzini@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2017-07-10block: Make bdrv_is_allocated() byte-basedEric Blake1-14/+20
We are gradually moving away from sector-based interfaces, towards byte-based. In the common case, allocation is unlikely to ever use values that are not naturally sector-aligned, but it is possible that byte-based values will let us be more precise about allocation at the end of an unaligned file that can do byte-based access. Changing the signature of the function to use int64_t *pnum ensures that the compiler enforces that all callers are updated. For now, the io.c layer still assert()s that all callers are sector-aligned on input and that *pnum is sector-aligned on return to the caller, but that can be relaxed when a later patch implements byte-based block status. Therefore, this code adds usages like DIV_ROUND_UP(,BDRV_SECTOR_SIZE) to callers that still want aligned values, where the call might reasonbly give non-aligned results in the future; on the other hand, no rounding is needed for callers that should just continue to work with byte alignment. For the most part this patch is just the addition of scaling at the callers followed by inverse scaling at bdrv_is_allocated(). But some code, particularly bdrv_commit(), gets a lot simpler because it no longer has to mess with sectors; also, it is now possible to pass NULL if the caller does not care how much of the image is allocated beyond the initial offset. Leave comments where we can further simplify once a later patch eliminates the need for sector-aligned requests through bdrv_is_allocated(). For ease of review, bdrv_is_allocated_above() will be tackled separately. Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10vvfat: change OEM name to 'MSWIN4.1'Hervé Poussineau1-1/+1
According to specification: "'MSWIN4.1' is the recommanded setting, because it is the setting least likely to cause compatibility problems. If you want to put something else in here, that is your option, but the result may be that some FAT drivers might not recognize the volume." Specification: "FAT: General overview of on-disk format" v1.03, page 9 Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10vvfat: handle KANJI lead byte 0xe5Hervé Poussineau1-2/+7
Specification: "FAT: General overview of on-disk format" v1.03, page 23 Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10vvfat: limit number of entries in root directory in FAT12/FAT16Hervé Poussineau1-9/+17
FAT12/FAT16 root directory is two sectors in size, which allows only 512 directory entries. Prevent QEMU startup if too much files exist, instead of overflowing root directory. Also introduce variable root_entries, which will be required for FAT32. Fixes: https://bugs.launchpad.net/qemu/+bug/1599539/comments/4 Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10vvfat: correctly generate numeric-tail of short file namesHervé Poussineau1-34/+31
More specifically: - try without numeric-tail only if LFN didn't have invalid short chars - start at ~1 (instead of ~0) - handle case if numeric tail is more than one char (ie > 10) Windows 9x Scandisk doesn't see anymore mismatches between short file names and long file names for non-ASCII filenames. Specification: "FAT: General overview of on-disk format" v1.03, page 31 Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10vvfat: correctly create base short names for non-ASCII filenamesHervé Poussineau1-28/+76
More specifically, create short name from filename and change blacklist of invalid chars to whitelist of valid chars. Windows 9x also now correctly see long file names of filenames containing a space, but Scandisk still complains about mismatch between SFN and LFN. [kwolf: Build fix for this intermediate patch (it included declarations for variables that are only used in the next patch) ] Specification: "FAT: General overview of on-disk format" v1.03, pages 30-31 Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10vvfat: correctly create long names for non-ASCII filenamesHervé Poussineau1-20/+18
Assume that input filename is encoded as UTF-8, so correctly create UTF-16 encoding. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10vvfat: always create . and .. entries at first and in that orderHervé Poussineau1-2/+11
readdir() doesn't always return . and .. entries at first and in that order. This leads to not creating them at first in the directory, which raises some errors on file system checking utilities like MS-DOS Scandisk. Specification: "FAT: General overview of on-disk format" v1.03, page 25 Fixes: https://bugs.launchpad.net/qemu/+bug/1599539 Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10vvfat: fix field names in FAT12/FAT16 and FAT32 boot sectorsHervé Poussineau1-7/+14
Specification: "FAT: General overview of on-disk format" v1.03, pages 11-13 Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10vvfat: introduce offset_to_bootsector, offset_to_fat and offset_to_root_dirHervé Poussineau1-27/+43
- offset_to_bootsector is the number of sectors up to FAT bootsector - offset_to_fat is the number of sectors up to first File Allocation Table - offset_to_root_dir is the number of sectors up to root directory sector Replace first_sectors_number - 1 by offset_to_bootsector. Replace first_sectors_number by offset_to_fat. Replace faked_sectors by offset_to_rootdir. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10vvfat: rename useless enumeration valuesHervé Poussineau1-5/+8
MODE_FAKED and MODE_RENAMED are not and were never used. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10vvfat: fix typosHervé Poussineau1-4/+4
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10vvfat: replace tabs by 8 spacesHervé Poussineau1-1027/+1027
This was a complete mess. On 2299 indented lines: - 1329 were with spaces only - 617 with tabulations only - 353 with spaces and tabulations Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10vvfat: fix qemu-img map and qemu-img convertHervé Poussineau1-2/+1
- bs->total_sectors is the number of sectors of the whole disk - s->sector_count is the number of sectors of the FAT partition This fixes the following assert in qemu-img map: qemu-img.c:2641: get_block_status: Assertion `nb_sectors' failed. This also fixes an infinite loop in qemu-img convert. Fixes: 4480e0f924a42e1db8b8cfcac4d0634dd1bb27a0 Fixes: https://bugs.launchpad.net/qemu/+bug/1599539 Cc: qemu-stable@nongnu.org Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-06-20qapi: merge QInt and QFloat in QNumMarc-André Lureau1-1/+0
We would like to use a same QObject type to represent numbers, whether they are int, uint, or floats. Getters will allow some compatibility between the various types if the number fits other representations. Add a few more tests while at it. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20170607163635.17635-7-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [parse_stats_intervals() simplified a bit, comment in test_visitor_in_int_overflow() tidied up, suppress bogus warnings] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-05-17migration: Create migration/blocker.hJuan Quintela1-1/+1
This allows us to remove lots of includes of migration/migration.h Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-05-09qobject: Use simpler QDict/QList scalar insertion macrosEric Blake1-5/+5
We now have macros in place to make it less verbose to add a scalar to QDict and QList, so use them. Patch created mechanically via: spatch --sp-file scripts/coccinelle/qobject.cocci \ --macro-file scripts/cocci-macro-file.h --dir . --in-place then touched up manually to fix a couple of '?:' back to original spacing, as well as avoiding a long line in monitor.c. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20170427215821.19397-7-eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-04-24block: do not set BDS read_only if copy_on_read enabledJeff Cody1-4/+15
A few block drivers will set the BDS read_only flag from their .bdrv_open() function. This means the bs->read_only flag could be set after we enable copy_on_read, as the BDRV_O_COPY_ON_READ flag check occurs prior to the call to bdrv->bdrv_open(). This adds an error return to bdrv_set_read_only(), and an error will be return if we try to set the BDS to read_only while copy_on_read is enabled. This patch also changes the behavior of vvfat. Before, vvfat could override the drive 'readonly' flag with its own, internal 'rw' flag. For instance, this -drive parameter would result in a writable image: "-drive format=vvfat,dir=/tmp/vvfat,rw,if=virtio,readonly=on" This is not correct. Now, attempting to use the above -drive parameter will result in an error (i.e., 'rw' is incompatible with 'readonly=on'). Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 0c5b4c1cc2c651471b131f21376dfd5ea24d2196.1491597120.git.jcody@redhat.com
2017-04-24block: add bdrv_set_read_only() helper functionJeff Cody1-2/+2
We have a helper wrapper for checking for the BDS read_only flag, add a helper wrapper to set the read_only flag as well. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 9b18972d05f5fa2ac16c014f0af98d680553048d.1491597120.git.jcody@redhat.com
2017-03-13vvfat: React to bdrv_is_allocated() errorsEric Blake1-3/+19
If bdrv_is_allocated() fails, we should react to that failure. For 2 of the 3 callers, reporting the error was easy. But in cluster_was_modified() and its lone caller get_cluster_count_for_direntry(), it's rather invasive to update the logic to pass the error back; so there, I went with merely documenting the issue by changing the return type to bool (in all likelihood, treating the cluster as modified will then trigger a read which will also fail, and eventually get to an error - but given the appalling number of abort() calls in this code, I'm not making it any worse). Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-02-28block: Add Error parameter to bdrv_set_backing_hd()Kevin Wolf1-1/+1
Not all callers of bdrv_set_backing_hd() know for sure that attaching the backing file will be allowed by the permission system. Return the error from the function rather than aborting. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2017-02-28vvfat: Implement .bdrv_child_perm()Kevin Wolf1-0/+22
vvfat is the last remaining driver that can have children, but doesn't implement .bdrv_child_perm() yet. The default handlers aren't suitable here, so let's implement a very simple driver-specific one that protects the internal child from being used by other users as good as our permissions permit. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Fam Zheng <famz@redhat.com>
2017-02-24vvfat: Use opened node as backing fileKevin Wolf1-5/+5
We should not try to assign a not yet opened node as the backing file, because as soon as the permission system is added it will fail. The just added bdrv_new_open_driver() function is the right tool to open a file with an internal driver, use it. In case anyone wonders whether that magic fake backing file to trigger a special action on 'commit' actually works today: No, not for me. One reason is that we've been adding a raw format driver on top for several years now and raw doesn't support commit. Other reasons include that the backing file isn't writable and the driver doesn't support reopen, and it's also size 0 and the driver doesn't support bdrv_truncate. All of these are easily fixable, but then 'commit' ended up in an infinite loop deep in the vvfat code for me, so I thought I'd best leave it alone. I'm not really sure what it was supposed to do anyway. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2017-01-24migration: disallow migrate_add_blocker during migrationAshijeet Acharya1-7/+12
If a migration is already in progress and somebody attempts to add a migration blocker, this should rightly fail. Add an errp parameter and a retcode return value to migrate_add_blocker. Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com> Message-Id: <1484566314-3987-5-git-send-email-ashijeetacharya@gmail.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Acked-by: Greg Kurz <groug@kaod.org> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Merged with recent 'Allow invtsc migration' change
2017-01-24block/vvfat: Remove the undesirable commentAshijeet Acharya1-1/+0
Remove the "// assert(is_consistent(s))" comment in block/vvfat.c Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com> Message-Id: <1484566314-3987-2-git-send-email-ashijeetacharya@gmail.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2016-09-23block: Add "read-only" to the options QDictAlberto Garcia1-1/+2
This adds the "read-only" option to the QDict. One important effect of this change is that when a child inherits options from its parent, the existing "read-only" mode can be preserved if it was explicitly set previously. This addresses scenarios like this: [E] <- [D] <- [C] <- [B] <- [A] In this case, if we reopen [D] with read-only=off, and later reopen [B], then [D] will not inherit read-only=on from its parent during the bdrv_reopen_queue_child() stage. The BDRV_O_RDWR flag is not removed yet, but its keep in sync with the value of the "read-only" option. Signed-off-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-13vvfat: Fix qcow write target driver specificationMax Reitz1-1/+2
First, bdrv_open_child() expects all options for the child to be prefixed by the child's name (and a separating dot). Second, bdrv_open_child() does not take ownership of the QDict passed to it but only extracts all options for the child, so if a QDict is created for the sole purpose of passing it to bdrv_open_child(), it needs to be freed afterwards. This patch makes vvfat adhere to both of these rules. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20160711135452.11304-1-mreitz@redhat.com Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-07-05block: Convert bdrv_write() to BdrvChildKevin Wolf1-3/+2
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-05block: Convert bdrv_read() to BdrvChildKevin Wolf1-1/+1
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-05vvfat: Use BdrvChild for s->qcowKevin Wolf1-23/+43
vvfat uses a temporary qcow file to cache written data in read-write mode. In order to do things properly, this should show up in the BDS graph and I/O should go through BdrvChild like for every other node. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-05block: Use bool as appropriate for BDS membersEric Blake1-2/+2
Using int for values that are only used as booleans is confusing. While at it, rearrange a couple of members so that all the bools are contiguous. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-05block: Move request_alignment into BlockLimitEric Blake1-1/+1
It makes more sense to have ALL block size limit constraints in the same struct. Improve the documentation while at it. Simplify a couple of conditionals, now that we have audited and documented that request_alignment is always non-zero. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-05block: Set request_alignment during .bdrv_refresh_limits()Eric Blake1-1/+6
We want to eventually stick request_alignment alongside other BlockLimits, but first, we must ensure it is populated at the same time as all other limits, rather than being a special case that is set only when a block is first opened. Add a .bdrv_refresh_limits() to all four of our legacy devices that will always be sector-only (bochs, cloop, dmg, vvfat), in spite of their recent conversion to expose a byte interface. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-06-20coccinelle: Remove unnecessary variables for function return valueEduardo Habkost1-4/+1
Use Coccinelle script to replace 'ret = E; return ret' with 'return E'. The script will do the substitution only when the function return type and variable type are the same. Manual fixups: * audio/audio.c: coding style of "read (...)" and "write (...)" * block/qcow2-cluster.c: wrap line to make it shorter * block/qcow2-refcount.c: change indentation of wrapped line * target-tricore/op_helper.c: fix coding style of "remainder|quotient" * target-mips/dsp_helper.c: reverted changes because I don't want to argue about checkpatch.pl * ui/qemu-pixman.c: fix line indentation * block/rbd.c: restore blank line between declarations and statements Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1465855078-19435-4-git-send-email-ehabkost@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Unused Coccinelle rule name dropped along with a redundant comment; whitespace touched up in block/qcow2-cluster.c; stale commit message paragraph deleted] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-07block: Use DIV_ROUND_UPLaurent Vivier1-2/+1
Replace (((n) + (d) - 1) /(d)) by DIV_ROUND_UP(n,d). This patch is the result of coccinelle script scripts/coccinelle/round.cocci CC: qemu-block@nongnu.org Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-05-25block: Make bdrv_open() return a BDSMax Reitz1-4/+4
There are no callers to bdrv_open() or bdrv_open_inherit() left that pass a pointer to a non-NULL BDS pointer as the first argument of these functions, so we can finally drop that parameter and just make them return the new BDS. Generally, the following pattern is applied: bs = NULL; ret = bdrv_open(&bs, ..., &local_err); if (ret < 0) { error_propagate(errp, local_err); ... } by bs = bdrv_open(..., errp); if (!bs) { ret = -EINVAL; ... } Of course, there are only a few instances where the pattern is really pure. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-05-19qemu-common: stop including qemu/bswap.h from qemu-common.hPaolo Bonzini1-0/+1
Move it to the actual users. There are still a few includes of qemu/bswap.h in headers; removing them is left for future work. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-12vvfat: Implement .bdrv_co_preadv/pwritev interfacesKevin Wolf1-9/+46
This doesn't really convert any of the actual vvfat logic to use vectored I/O (and it's doubtful whether that would make sense), but instead just adapts the wrappers to the modern interface. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com>
2016-04-29vvfat: Fix default volume labelKevin Wolf1-0/+2
Commit d5941dd documented that it leaves the default volume name as it was ("QEMU VVFAT"), but it doesn't actually implement this. You get an empty name (eleven space characters) instead. This fixes the implementation to apply the advertised default. Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-04-29vvfat: Fix volume name assertionKevin Wolf1-1/+6
Commit d5941dd made the volume name configurable, but it didn't consider that the rw code compares the volume name string to assert that the first directory entry is the volume name. This made vvfat crash in rw mode. This fixes the assertion to compare with the configured volume name instead of a literal string. Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-03-30block: Remove BDRV_O_CACHE_WBKevin Wolf1-2/+1
The previous patches have successively made blk->enable_write_cache the true source for the information whether a writethrough mode must be implemented. The corresponding BDRV_O_CACHE_WB is only useless baggage we're carrying around, so now's the time to remove it. At the same time, we remove the 'cache.writeback' option parsing on the BDS level as the only effect was setting the BDRV_O_CACHE_WB flag. This change requires test cases that explicitly enabled the option to drop it. Other than that and the change of the error message when writethrough is enabled on the BDS level (from "Can't set writethrough mode" to "doesn't support the option"), there should be no change in behaviour. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-22util: move declarations out of qemu-common.hVeronia Bahaa1-1/+1
Move declarations out of qemu-common.h for functions declared in utils/ files: e.g. include/qemu/path.h for utils/path.c. Move inline functions out of qemu-common.h and into new files (e.g. include/qemu/bcd.h) Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster1-0/+1
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-02block: Add "file" output parameter to block status query functionsFam Zheng1-1/+1
The added parameter can be used to return the BDS pointer which the valid offset is referring to. Its value should be ignored unless BDRV_BLOCK_OFFSET_VALID in ret is set. Until block drivers fill in the right value, let's clear it explicitly right before calling .bdrv_get_block_status. The "bs->file" condition in bdrv_co_get_block_status is kept now to keep iotest case 102 passing, and will be fixed once all drivers return the right file pointer. Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1453780743-16806-2-git-send-email-famz@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-20block: Clean up includesPeter Maydell1-1/+1
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-10-16block: Remove bdrv_swap()Kevin Wolf1-7/+0
bdrv_swap() is unused now. Remove it and all functions that have no other users than bdrv_swap(). In particular, this removes the .bdrv_rebind callbacks from block drivers. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-10-16block: Manage backing file references in bdrv_set_backing_hd()Kevin Wolf1-1/+5
This simplifies the code somewhat, especially when dropping whole backing file subchains. The exception is the mirroring code that does adventurous things with bdrv_swap() and in order to keep it working, I had to duplicate most of bdrv_set_backing_hd() locally. We'll get rid again of this ugliness shortly. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-10-16block: Convert bs->backing_hd to BdrvChildKevin Wolf1-3/+3
This is the final step in converting all of the BlockDriverState pointers that block drivers use to BdrvChild. After this patch, bs->children contains the full list of child nodes that are referenced by a given BDS, and these children are only referenced through BdrvChild, so that updating the pointer in there is enough for changing edges in the graph. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-09-14block: Drop drv parameter from bdrv_open()Max Reitz1-1/+1
Now that this parameter is effectively unused, we can drop it and just pass NULL on to bdrv_open_inherit(). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.1 at 2024-12-28 13:15:02 +0000