aboutsummaryrefslogtreecommitdiff
path: root/block/vpc.c
AgeCommit message (Collapse)AuthorFilesLines
2013-06-28vpc: Implement .bdrv_has_zero_initKevin Wolf1-6/+19
Depending on the subformat, has_zero_init on VHD must behave like raw and query the underlying storage (fixed) or like other sparse formats that can always return 1 (dynamic, differencing). Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-03-15block: Add options QDict to .bdrv_open()Kevin Wolf1-1/+1
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-12Revert "block/vpc: Fix size calculation"Stefan Hajnoczi1-9/+5
This reverts commit f880defbb06708d30a38ce9f2667067626acdd38. Jeff Cody's testing revealed that the interpretation of size differs even between VirtualPC and HyperV. Revert this so there is time to consider the impact of any backwards incompatible behavior this change creates. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-11block/vpc: Fix size calculationStefan Weil1-5/+9
The size calculated from the CHS values is not the real image (disk) size, but usually a smaller value. This is caused by rounding effects. Only older operating systems use CHS. Such guests won't be able to use the whole disk. All modern operating systems use the real size. This patch fixes https://bugs.launchpad.net/qemu/+bug/1105670/. Signed-off-by: Stefan Weil <sw@weilnetz.de> Message-id: 1360265212-22037-1-git-send-email-sw@weilnetz.de Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01vpc: Fix bdrv_open() error handlingKevin Wolf1-12/+30
Return -errno instead of -1 on errors. While touching the code, fix a memory leak. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19migration: move include files to include/migration/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19block: move include files to include/block/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-11block: vpc support for ~2 TB disksCharles Arnold1-4/+13
The VHD specification allows for up to a 2 TB disk size. The current implementation in qemu emulates EIDE and ATA-2 hardware which only allows for up to 127 GB. This disk size limitation can be overridden by allowing up to 255 heads instead of the normal 4 bit limitation of 16. Doing so allows disk images to be created of up to nearly 2 TB. This change does not violate the VHD format specification nor does it change how smaller disks (ie, <=127GB) are defined. [Charles Arnold also writes: "In analyzing a 160 GB VHD fixed disk image created on Windows 2008 R2, it appears that MS is also ignoring the CHS values in the footer geometry field in whatever driver they use for accessing the image. The CHS values are set at 65535,16,255 which obviously doesn't represent an image size of 160 GB." -- Stefan] Signed-off-by: Charles Arnold <carnold@suse.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-12-11block: vpc initialize the uuid footer fieldCharles Arnold1-1/+6
Initialize the uuid field in the footer with a generated uuid. Signed-off-by: Charles Arnold <carnold@suse.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-09-24block: vpc image file reopenJeff Cody1-0/+7
There is currently nothing that needs to be done for VPC image file reopen. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-15block: Convert close calls to qemu_closeCorey Bryant1-1/+1
This patch converts all block layer close calls, that correspond to qemu_open calls, to qemu_close. Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-15block: Convert open calls to qemu_openCorey Bryant1-1/+1
This patch converts all block layer open calls to qemu_open. Note that this adds the O_CLOEXEC flag to the changed open paths when the O_CLOEXEC macro is defined. Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-04-05block/vpc: write checksum back to footer after checkZhang Shengju1-0/+3
After validation check, the 'checksum' is not written back to footer, which leave it with zero. This results in errors while loadding it under Microsoft's Hyper-V environment, and also errors from utilities like Citrix's vhd-util. Signed-off-by: Zhang Shengju <sean_zhang@trendmicro.com.cn> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-04-05block: push recursive flushing up from driversPaolo Bonzini1-6/+0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-02-09vpc: Round up image size during fixed image creationKevin Wolf1-13/+10
The geometry calculation algorithm from the VHD spec rounds the image size down if it doesn't exactly match a geometry. During image conversion, this causes the image to be truncated. For dynamic images, we already have code in place to round up instead, let's do the same for fixed images. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-02-09vpc: Add support for Fixed Disk typeCharles Arnold1-91/+194
The Virtual Hard Disk Image Format Specification allows for three types of hard disk formats, Fixed, Dynamic, and Differencing. Qemu currently only supports Dynamic disks. This patch adds support for the Fixed Disk format. Usage: Example 1: qemu-img create -f vpc -o type=fixed <filename> [size] Example 2: qemu-img convert -O vpc -o type=fixed <input filename> <output filename> While it is also allowed to specify '-o type=dynamic', the default disk type remains Dynamic and is what is used when the type is left unspecified. Signed-off-by: Charles Arnold <carnold@suse.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-11-23vpc: Add missing error handling in alloc_blockKevin Wolf1-1/+4
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-11-23vpc: Add migration blockerKevin Wolf1-0/+13
vpc caches the BAT. For migration to work, it would have to be invalidated. Block migration for now. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-11-11block: Rename bdrv_co_flush to bdrv_co_flush_to_diskKevin Wolf1-3/+5
There are two different types of flush that you can do: Flushing one level up to the OS (i.e. writing data to the host page cache) or flushing it all the way down to the disk. The existing functions flush to the disk, reflect this in the function name. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-11-11block: Fix vpc initialization of the Dynamic Disk HeaderCharles Arnold1-1/+5
The Data Offset field in the Dynamic Disk Header is an 8 byte field. Although the specification (2006-10-11) gives an example of initializing only the first 4 bytes, images generated by Microsoft on Windows initialize all 8 bytes. Failure to initialize all 8 bytes results in errors from utilities like Citrix's vhd-util which checks specifically for the proper Data Offset field initialization. Signed-off-by: Charles Arnold <carnold@suse.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-21block: change flush to co_flushPaolo Bonzini1-3/+3
Since coroutine operation is now mandatory, convert all bdrv_flush implementations to coroutines. For qcow2, this means taking the lock. Other implementations are simpler and just forward bdrv_flush to the underlying protocol, so they can avoid the lock. The bdrv_flush callback is then unused and can be eliminated. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-21block: take lock around bdrv_write implementationsPaolo Bonzini1-1/+12
This does the first part of the conversion to coroutines, by wrapping bdrv_write implementations to take the mutex. Drivers that implement bdrv_write rather than bdrv_co_writev can then benefit from asynchronous operation (at least if the underlying protocol supports it, which is not the case for raw-win32), even though they still operate with a bounce buffer. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-21block: take lock around bdrv_read implementationsPaolo Bonzini1-1/+12
This does the first part of the conversion to coroutines, by wrapping bdrv_read implementations to take the mutex. Drivers that implement bdrv_read rather than bdrv_co_readv can then benefit from asynchronous operation (at least if the underlying protocol supports it, which is not the case for raw-win32), even though they still operate with a bounce buffer. raw-win32 does not need the lock, because it cannot yield. nbd also doesn't probably, but better be safe. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-21block: add a CoMutex to synchronous read driversPaolo Bonzini1-0/+2
The big conversion of bdrv_read/write to coroutines caused the two homonymous callbacks in BlockDriver to become reentrant. It goes like this: 1) bdrv_read is now called in a coroutine, and calls bdrv_read or bdrv_pread. 2) the nested bdrv_read goes through the fast path in bdrv_rw_co_entry; 3) in the common case when the protocol is file, bdrv_co_do_readv calls bdrv_co_readv_em (and from here goes to bdrv_co_io_em), which yields until the AIO operation is complete; 4) if bdrv_read had been called from a bottom half, the main loop is free to iterate again: a device model or another bottom half can then come and call bdrv_read again. This applies to all four of read/write/flush/discard. It would also apply to is_allocated, but it is not used from within coroutines: besides qemu-img.c and qemu-io.c, which operate synchronously, the only user is the monitor. Copy-on-read will introduce a use in the block layer, and will require converting it. The solution is "simply" to convert all drivers to coroutines! We just need to add a CoMutex that is taken around affected operations. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-20Use glib memory allocation and free functionsAnthony Liguori1-4/+4
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-01block/vpc.c: Detect too-large vpc fileSerge E. Hallyn1-1/+7
VHD files technically can be up to 2Tb, but virtual pc is limited to 127G. Currently qemu-img refused to create vpc files > 127G, but it is failing to return error when converting from a non-vpc VHD file which is >127G. It returns success, but creates a truncated converted image. Also, qemu-img info claims the vpc file is 127G (and clean). This patch detects a too-large vpc file and returns -EFBIG. Without this patch, ============================================================= root@ip-10-38-123-242:~/qemu-fixed# qemu-img info /mnt/140g-dynamic.vhd image: /mnt/140g-dynamic.vhd file format: vpc virtual size: 127G (136899993600 bytes) disk size: 284K root@ip-10-38-123-242:~/qemu-fixed# qemu-img convert -f vpc -O raw /mnt/140g-dynamic.vhd /mnt/y root@ip-10-38-123-242:~/qemu-fixed# echo $? 0 root@ip-10-38-123-242:~/qemu-fixed# qemu-img info /mnt/y image: /mnt/y file format: raw virtual size: 127G (136899993600 bytes) disk size: 0 ============================================================= (The 140G image was truncated with no warning or error.) With the patch, I get: ============================================================= root@ip-10-38-123-242:~/qemu-fixed# ./qemu-img info /mnt/140g-dynamic.vhd qemu-img: Could not open '/mnt/140g-dynamic.vhd': File too large root@ip-10-38-123-242:~/qemu-fixed# ./qemu-img convert -f vpc -O raw /mnt/140g-dynamic.vhd /mnt/y qemu-img: Could not open '/mnt/140g-dynamic.vhd': File too large qemu-img: Could not open '/mnt/140g-dynamic.vhd' ============================================================= See https://bugs.launchpad.net/qemu/+bug/814222 for details. Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-04-13vpc.c: Use get_option_parameter() does the searchMitnick Lyu1-6/+2
Use get_option_parameter() to instead of duplicating the loop, and use BDRV_SECTOR_SIZE to instead of 512 Signed-off-by: Mitnick Lyu <mitnick.lyu@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-12vpc: fix a file descriptor leakBlue Swirl1-17/+30
Fix a file descriptor leak, reported by cppcheck: [/src/qemu/block/vpc.c:524]: (error) Resource leak: fd Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-11-24block: Remove unused s->hd in various driversKevin Wolf1-2/+0
All drivers use bs->file instead of s->hd for quite a while now, so it's time to remove s->hd. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2010-11-04vpc: Implement bdrv_flushKevin Wolf1-8/+13
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-22vpc: Use bdrv_(p)write_sync for metadata writesKevin Wolf1-4/+5
Use bdrv_(p)write_sync to ensure metadata integrity in case of a crash. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-15vpc: Read/write multiple sectors at onceKevin Wolf1-11/+30
This changes the vpc block driver (for VHD) to read/write multiple sectors at once instead of doing a request for each single sector. Before this, running qemu-iotests for VPC took ages, now it's actually quite reasonable to run it always (down from ~1 hour to 40 seconds for me). Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-17block/vpc: Fix conversion from size to disk geometryStefan Weil1-9/+12
The VHD algorithm calculates a disk geometry which is usually smaller than the requested size. QEMU tried to round up but failed for certain sizes: qemu-img create -f vpc disk.vpc 9437184 would create an image with 9435136 bytes (which is too small for qemu-img convert). Instead of hacking the geometry algorithm, the patch increases the number of sectors until we get enough sectors. Cc: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-03block: Open the underlying image file in generic codeKevin Wolf1-20/+12
Format drivers shouldn't need to bother with things like file names, but rather just get an open BlockDriverState for the underlying protocol. This patch introduces this behaviour for bdrv_open implementation. For protocols which need to access the filename to open their file/device/connection/... a new callback bdrv_file_open is introduced which doesn't get an underlying file opened. For now, also some of the more obscure formats use bdrv_file_open because they open() the file themselves instead of using the block.c functions. They need to be fixed in later patches. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2009-09-09Fix spelling in comment.Stefan Weil1-1/+1
The company which made Virtual PC was Connectix. They use the magic string "conectix" in their disk images. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-24eliminate errors about unused results in block/vpc.cNathan Froyd1-4/+4
These errors come up when compiling with gcc-4.3.3 and some older headers: /scratch/froydnj/qemu.git/block/vpc.c: In function 'vpc_create': /scratch/froydnj/qemu.git/block/vpc.c:514: error: value computed is not used /scratch/froydnj/qemu.git/block/vpc.c:516: error: value computed is not used /scratch/froydnj/qemu.git/block/vpc.c:517: error: value computed is not used /scratch/froydnj/qemu.git/block/vpc.c:566: error: value computed is not used Use memcpy to copy the strings instead of strncpy. Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-06qemu-img: Print available options with -o ?Kevin Wolf1-1/+5
This patch adds a small help text to each of the options in the block drivers which can be displayed by using qemu-img create -f fmt -o ? Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2009-05-22Convert all block drivers to new bdrv_createKevin Wolf1-4/+17
Now we can make use of the newly introduced option structures. Instead of having bdrv_create carry more and more parameters (which are format specific in most cases), just pass a option structure as defined by the driver itself. bdrv_create2() contains an emulation of the old interface to simplify the transition. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-14Move block drivers into their own directoryAnthony Liguori1-0/+606
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.1 at 2024-11-03 09:53:55 +0000