aboutsummaryrefslogtreecommitdiff
path: root/block/vmdk.c
AgeCommit message (Collapse)AuthorFilesLines
2023-05-10block: bdrv/blk_co_unref() for calls in coroutine contextKevin Wolf1-9/+9
These functions must not be called in coroutine context, because they need write access to the graph. Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20230504115750.54437-4-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> (cherry picked from commit b2ab5f545fa1eaaf2955dd617bee19a8b3279786) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-02-23block: Mark bdrv_co_create() and callers GRAPH_RDLOCKKevin Wolf1-34/+29
This adds GRAPH_RDLOCK annotations to declare that callers of bdrv_co_create() need to hold a reader lock for the graph. Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20230203152202.49054-17-kwolf@redhat.com> Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-02-23block: Mark public read/write functions GRAPH_RDLOCKKevin Wolf1-38/+27
This adds GRAPH_RDLOCK annotations to declare that callers of bdrv_co_pread*/pwrite*() need to hold a reader lock for the graph. For some places, we know that they will hold the lock, but we don't have the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock() with a FIXME comment. These places will be removed once everything is properly annotated. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20230203152202.49054-12-kwolf@redhat.com> Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-02-23block: Mark read/write in block/io.c GRAPH_RDLOCKKevin Wolf1-3/+1
This adds GRAPH_RDLOCK annotations to declare that callers of bdrv_driver_*() need to hold a reader lock for the graph. It doesn't add the annotation to public functions yet. For some places, we know that they will hold the lock, but we don't have the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock() with a FIXME comment. These places will be removed once everything is properly annotated. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20230203152202.49054-11-kwolf@redhat.com> Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-02-23block: Mark bdrv_co_flush() and callers GRAPH_RDLOCKEmanuele Giuseppe Esposito1-2/+4
This adds GRAPH_RDLOCK annotations to declare that callers of bdrv_co_flush() need to hold a reader lock for the graph. For some places, we know that they will hold the lock, but we don't have the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock() with a FIXME comment. These places will be removed once everything is properly annotated. Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20230203152202.49054-8-kwolf@redhat.com> Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-02-23block: Mark bdrv_co_truncate() and callers GRAPH_RDLOCKKevin Wolf1-0/+2
This adds GRAPH_RDLOCK annotations to declare that callers of bdrv_co_truncate() need to hold a reader lock for the graph. For some places, we know that they will hold the lock, but we don't have the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock() with a FIXME comment. These places will be removed once everything is properly annotated. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20230203152202.49054-4-kwolf@redhat.com> Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-02-17vmdk: Fix .bdrv_co_create(_opts) to open images with no_co_wrapperKevin Wolf1-10/+12
.bdrv_co_create implementations run in a coroutine. Therefore they are not allowed to open images directly. Fix the calls to use the corresponding no_co_wrappers instead. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20230126172432.436111-11-kwolf@redhat.com> Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Reviewed-by: Hanna Czenczek <hreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-02-01block/vmdk: Change extent info typeHanna Reitz1-4/+4
VMDK's implementation of .bdrv_get_specific_info() returns information about its extent files, ostensibly in the form of ImageInfo objects. However, it does not get this information through bdrv_query_image_info(), but fills only a select few fields with custom information that does not always match the fields' purposes. For example, @format, which is supposed to be a block driver name, is filled with the extent type, e.g. SPARSE or FLAT. In ImageInfo, @compressed shows whether the data that can be seen in the image is stored in compressed form or not. For example, a compressed qcow2 image will store compressed data in its data file, but when accessing the qcow2 node, you will see normal data. This is not how VMDK uses the @compressed field for its extent files: Instead, it signifies whether accessing the extent file will yield compressed data (which the VMDK driver then (de-)compresses). Create a new structure to represent the extent information. This allows us to clarify the fields' meanings, and it clearly shows that these are not complete ImageInfo objects. (That is, if a user wants an extent file's ImageInfo object, they will need to query it separately, and will not get it from ImageInfoSpecificVmdk.extents.) Note that this removes the last use of ['ImageInfo'] (i.e. an array of ImageInfo objects), so the QAPI generator will no longer generate ImageInfoList by default. However, we use it in qemu-img.c, so we need to create a dummy object to force the generate to create that type, similarly to DummyForceArrays in machine.json (introduced in commit 9f08c8ec73878122ad4b061ed334f0437afaaa32 ("qapi: Lazy creation of array types")). Signed-off-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220620162704.80987-4-hreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-02-01block: Convert bdrv_get_info() to co_wrapper_mixedEmanuele Giuseppe Esposito1-2/+3
bdrv_get_info() is categorized as an I/O function, and it currently doesn't run in a coroutine. We should let it take a graph rdlock since it traverses the block nodes graph, which however is only possible in a coroutine. Therefore turn it into a co_wrapper to move the actual function into a coroutine where the lock can be taken. Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20230113204212.359076-11-kwolf@redhat.com> Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-02-01block: Convert bdrv_get_allocated_file_size() to co_wrapperEmanuele Giuseppe Esposito1-4/+5
bdrv_get_allocated_file_size() is categorized as an I/O function, and it currently doesn't run in a coroutine. We should let it take a graph rdlock since it traverses the block nodes graph, which however is only possible in a coroutine. Therefore turn it into a co_wrapper to move the actual function into a coroutine where the lock can be taken. Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20230113204212.359076-10-kwolf@redhat.com> Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-12-15block: bdrv_create_file is a coroutine_fnEmanuele Giuseppe Esposito1-1/+1
It is always called in coroutine_fn callbacks, therefore it can directly call bdrv_co_create(). Rename it to bdrv_co_create_file too. Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Message-Id: <20221128142337.657646-9-eesposit@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-12-15block/vmdk: add coroutine_fn annotationsEmanuele Giuseppe Esposito1-17/+19
These functions end up calling bdrv_create() implemented as generated_co_wrapper functions. In addition, they also happen to be always called in coroutine context, meaning all callers are coroutine_fn. This means that the g_c_w function will enter the qemu_in_coroutine() case and eventually suspend (or in other words call qemu_coroutine_yield()). Therefore we can mark such functions coroutine_fn too. Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Message-Id: <20221128142337.657646-6-eesposit@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-12-14block/vmdk: Simplify vmdk_co_create() to return directlyMarkus Armbruster1-17/+11
Cc: Fam Zheng <fam@euphon.net> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Hanna Reitz <hreitz@redhat.com> Cc: qemu-block@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20221122134917.1217307-3-armbru@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2022-10-27vmdk: switch to *_co_* functionsAlberto Faria1-27/+27
Signed-off-by: Alberto Faria <afaria@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221013123711.620631-24-pbonzini@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-10-27vmdk: manually add more coroutine_fn annotationsPaolo Bonzini1-17/+17
The validity of these was double-checked with Alberto Faria's static analyzer. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221013123711.620631-14-pbonzini@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-10-27block: introduce bdrv_open_file_child() helperVladimir Sementsov-Ogievskiy1-4/+3
Almost all drivers call bdrv_open_child() similarly. Let's create a helper for this. The only not updated drivers that call bdrv_open_child() to set bs->file are raw-format and snapshot-access: raw-format sometimes want to have filtered child but don't set drv->is_filter to true. snapshot-access wants only DATA | PRIMARY Possibly we should implement drv->is_filter_func() handler, to consider raw-format as filter when it works as filter.. But it's another story. Note also, that we decrease assignments to bs->file in code: it helps us restrict modifying this field in further commit. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220726201134.924743-3-vsementsov@yandex-team.ru> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-10-07vmdk: add missing coroutine_fn annotationsPaolo Bonzini1-10/+12
Callers of coroutine_fn must be coroutine_fn themselves, or the call must be within "if (qemu_in_coroutine())". Apply coroutine_fn to functions where this holds. Reviewed-by: Alberto Faria <afaria@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220922084924.201610-21-pbonzini@redhat.com> [kwolf: Fixed up coding style] Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-07-12block: Change blk_{pread,pwrite}() param orderAlberto Faria1-5/+5
Swap 'buf' and 'bytes' around for consistency with blk_co_{pread,pwrite}(), and in preparation to implement these functions using generated_co_wrapper. Callers were updated using this Coccinelle script: @@ expression blk, offset, buf, bytes, flags; @@ - blk_pread(blk, offset, buf, bytes, flags) + blk_pread(blk, offset, bytes, buf, flags) @@ expression blk, offset, buf, bytes, flags; @@ - blk_pwrite(blk, offset, buf, bytes, flags) + blk_pwrite(blk, offset, bytes, buf, flags) It had no effect on hw/block/nand.c, presumably due to the #if, so that file was updated manually. Overly-long lines were then fixed by hand. Signed-off-by: Alberto Faria <afaria@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220705161527.1054072-4-afaria@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-07-12block: Make bdrv_{pread,pwrite}() return 0 on successAlberto Faria1-3/+2
They currently return the value of their 'bytes' parameter on success. Make them return 0 instead, for consistency with other I/O functions and in preparation to implement them using generated_co_wrapper. This also makes it clear that short reads/writes are not possible. The few callers that rely on the previous behavior are adjusted accordingly by hand. Signed-off-by: Alberto Faria <afaria@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20220609152744.3891847-4-afaria@redhat.com> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-07-12block: Change bdrv_{pread,pwrite,pwrite_sync}() param orderAlberto Faria1-25/+25
Swap 'buf' and 'bytes' around for consistency with bdrv_co_{pread,pwrite}(), and in preparation to implement these functions using generated_co_wrapper. Callers were updated using this Coccinelle script: @@ expression child, offset, buf, bytes, flags; @@ - bdrv_pread(child, offset, buf, bytes, flags) + bdrv_pread(child, offset, bytes, buf, flags) @@ expression child, offset, buf, bytes, flags; @@ - bdrv_pwrite(child, offset, buf, bytes, flags) + bdrv_pwrite(child, offset, bytes, buf, flags) @@ expression child, offset, buf, bytes, flags; @@ - bdrv_pwrite_sync(child, offset, buf, bytes, flags) + bdrv_pwrite_sync(child, offset, bytes, buf, flags) Resulting overly-long lines were then fixed by hand. Signed-off-by: Alberto Faria <afaria@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Message-Id: <20220609152744.3891847-3-afaria@redhat.com> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-07-12block: Add a 'flags' param to bdrv_{pread,pwrite,pwrite_sync}()Alberto Faria1-32/+25
For consistency with other I/O functions, and in preparation to implement them using generated_co_wrapper. Callers were updated using this Coccinelle script: @@ expression child, offset, buf, bytes; @@ - bdrv_pread(child, offset, buf, bytes) + bdrv_pread(child, offset, buf, bytes, 0) @@ expression child, offset, buf, bytes; @@ - bdrv_pwrite(child, offset, buf, bytes) + bdrv_pwrite(child, offset, buf, bytes, 0) @@ expression child, offset, buf, bytes; @@ - bdrv_pwrite_sync(child, offset, buf, bytes) + bdrv_pwrite_sync(child, offset, buf, bytes, 0) Resulting overly-long lines were then fixed by hand. Signed-off-by: Alberto Faria <afaria@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Message-Id: <20220609152744.3891847-2-afaria@redhat.com> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-05-04block/vmdk: Fix reopening bs->fileHanna Reitz1-1/+55
VMDK disk data is stored in extents, which may or may not be separate from bs->file. VmdkExtent.file points to where they are stored. Each that is stored in bs->file will simply reuse the exact pointer value of bs->file. (That is why vmdk_free_extents() will unref VmdkExtent.file (e->file) only if e->file != bs->file.) Reopen operations can change bs->file (they will replace the whole BdrvChild object, not just the BDS stored in that BdrvChild), and then we will need to change all .file pointers of all such VmdkExtents to point to the new BdrvChild. In vmdk_reopen_prepare(), we have to check which VmdkExtents are affected, and in vmdk_reopen_commit(), we can modify them. We have to split this because: - The new BdrvChild is created only after prepare, so we can change VmdkExtent.file only in commit - In commit, there no longer is any (valid) reference to the old BdrvChild object, so there would be nothing to compare VmdkExtent.file against to see whether it was equal to bs->file before reopening (There is BDRVReopenState.old_file_bs, but the old bs->file BdrvChild's .bs pointer will be NULL-ed when the new BdrvChild is created, and so we cannot compare VmdkExtent.file->bs against BDRVReopenState.old_file_bs) Signed-off-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220314162719.65384-2-hreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-03-07osdep: Move memalign-related functions to their own headerPeter Maydell1-0/+1
Move the various memalign-related functions out of osdep.h and into their own header, which we include only where they are used. While we're doing this, add some brief documentation comments. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20220226180723.1706285-10-peter.maydell@linaro.org
2021-11-02vmdk: allow specification of tools versionThomas Weißschuh1-4/+20
VMDK files support an attribute that represents the version of the guest tools that are installed on the disk. This attribute is used by vSphere before a machine has been started to determine if the VM has the guest tools installed. This is important when configuring "Operating system customizations" in vSphere, as it checks for the presence of the guest tools before allowing those customizations. Thus when the VM has not yet booted normally it would be impossible to customize it, therefore preventing a customized first-boot. The attribute should not hurt on disks that do not have the guest tools installed and indeed the VMware tools also unconditionally add this attribute. (Defaulting to the value "2147483647", as is done in this patch) Signed-off-by: Thomas Weißschuh <thomas.weissschuh.ext@zeiss.com> Message-Id: <20210913130419.13241-1-thomas.weissschuh.ext@zeiss.com> [hreitz: Added missing '#' in block-core.json] Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-09-29block: use int64_t instead of int in driver write_zeroes handlersVladimir Sementsov-Ogievskiy1-1/+1
We are generally moving to int64_t for both offset and bytes parameters on all io paths. Main motivation is realization of 64-bit write_zeroes operation for fast zeroing large disk chunks, up to the whole disk. We chose signed type, to be consistent with off_t (which is signed) and with possibility for signed return type (where negative value means error). So, convert driver write_zeroes handlers bytes parameter to int64_t. The only caller of all updated function is bdrv_co_do_pwrite_zeroes(). bdrv_co_do_pwrite_zeroes() itself is of course OK with widening of callee parameter type. Also, bdrv_co_do_pwrite_zeroes()'s max_write_zeroes is limited to INT_MAX. So, updated functions all are safe, they will not get "bytes" larger than before. Still, let's look through all updated functions, and add assertions to the ones which are actually unprepared to values larger than INT_MAX. For these drivers also set explicit max_pwrite_zeroes limit. Let's go: blkdebug: calculations can't overflow, thanks to bdrv_check_qiov_request() in generic layer. rule_check() and bdrv_co_pwrite_zeroes() both have 64bit argument. blklogwrites: pass to blk_log_writes_co_log() with 64bit argument. blkreplay, copy-on-read, filter-compress: pass to bdrv_co_pwrite_zeroes() which is OK copy-before-write: Calls cbw_do_copy_before_write() and bdrv_co_pwrite_zeroes, both have 64bit argument. file-posix: both handler calls raw_do_pwrite_zeroes, which is updated. In raw_do_pwrite_zeroes() calculations are OK due to bdrv_check_qiov_request(), bytes go to RawPosixAIOData::aio_nbytes which is uint64_t. Check also where that uint64_t gets handed: handle_aiocb_write_zeroes_block() passes a uint64_t[2] to ioctl(BLKZEROOUT), handle_aiocb_write_zeroes() calls do_fallocate() which takes off_t (and we compile to always have 64-bit off_t), as does handle_aiocb_write_zeroes_unmap. All look safe. gluster: bytes go to GlusterAIOCB::size which is int64_t and to glfs_zerofill_async works with off_t. iscsi: Aha, here we deal with iscsi_writesame16_task() that has uint32_t num_blocks argument and iscsi_writesame16_task() has uint16_t argument. Make comments, add assertions and clarify max_pwrite_zeroes calculation. iscsi_allocmap_() functions already has int64_t argument is_byte_request_lun_aligned is simple to update, do it. mirror_top: pass to bdrv_mirror_top_do_write which has uint64_t argument nbd: Aha, here we have protocol limitation, and NBDRequest::len is uint32_t. max_pwrite_zeroes is cleanly set to 32bit value, so we are OK for now. nvme: Again, protocol limitation. And no inherent limit for write-zeroes at all. But from code that calculates cdw12 it's obvious that we do have limit and alignment. Let's clarify it. Also, obviously the code is not prepared to handle bytes=0. Let's handle this case too. trace events already 64bit preallocate: pass to handle_write() and bdrv_co_pwrite_zeroes(), both 64bit. rbd: pass to qemu_rbd_start_co() which is 64bit. qcow2: offset + bytes and alignment still works good (thanks to bdrv_check_qiov_request()), so tail calculation is OK qcow2_subcluster_zeroize() has 64bit argument, should be OK trace events updated qed: qed_co_request wants int nb_sectors. Also in code we have size_t used for request length which may be 32bit. So, let's just keep INT_MAX as a limit (aligning it down to pwrite_zeroes_alignment) and don't care. raw-format: Is OK. raw_adjust_offset and bdrv_co_pwrite_zeroes are both 64bit. throttle: Both throttle_group_co_io_limits_intercept() and bdrv_co_pwrite_zeroes() are 64bit. vmdk: pass to vmdk_pwritev which is 64bit quorum: pass to quorum_co_pwritev() which is 64bit Hooray! At this point all block drivers are prepared to support 64bit write-zero requests, or have explicitly set max_pwrite_zeroes. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210903102807.27127-8-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: use <= rather than < in assertions relying on max_pwrite_zeroes] Signed-off-by: Eric Blake <eblake@redhat.com>
2021-09-29block: use int64_t instead of uint64_t in driver write handlersVladimir Sementsov-Ogievskiy1-4/+4
We are generally moving to int64_t for both offset and bytes parameters on all io paths. Main motivation is realization of 64-bit write_zeroes operation for fast zeroing large disk chunks, up to the whole disk. We chose signed type, to be consistent with off_t (which is signed) and with possibility for signed return type (where negative value means error). So, convert driver write handlers parameters which are already 64bit to signed type. While being here, convert also flags parameter to be BdrvRequestFlags. Now let's consider all callers. Simple git grep '\->bdrv_\(aio\|co\)_pwritev\(_part\)\?' shows that's there three callers of driver function: bdrv_driver_pwritev() and bdrv_driver_pwritev_compressed() in block/io.c, both pass int64_t, checked by bdrv_check_qiov_request() to be non-negative. qcow2_save_vmstate() does bdrv_check_qiov_request(). Still, the functions may be called directly, not only by drv->... Let's check: git grep '\.bdrv_\(aio\|co\)_pwritev\(_part\)\?\s*=' | \ awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \ while read func; do git grep "$func(" | \ grep -v "$func(BlockDriverState"; done shows several callers: qcow2: qcow2_co_truncate() write at most up to @offset, which is checked in generic qcow2_co_truncate() by bdrv_check_request(). qcow2_co_pwritev_compressed_task() pass the request (or part of the request) that already went through normal write path, so it should be OK qcow: qcow_co_pwritev_compressed() pass int64_t, it's updated by this patch quorum: quorum_co_pwrite_zeroes() pass int64_t and int - OK throttle: throttle_co_pwritev_compressed() pass int64_t, it's updated by this patch vmdk: vmdk_co_pwritev_compressed() pass int64_t, it's updated by this patch Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210903102807.27127-5-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2021-09-29block: use int64_t instead of uint64_t in driver read handlersVladimir Sementsov-Ogievskiy1-2/+2
We are generally moving to int64_t for both offset and bytes parameters on all io paths. Main motivation is realization of 64-bit write_zeroes operation for fast zeroing large disk chunks, up to the whole disk. We chose signed type, to be consistent with off_t (which is signed) and with possibility for signed return type (where negative value means error). So, convert driver read handlers parameters which are already 64bit to signed type. While being here, convert also flags parameter to be BdrvRequestFlags. Now let's consider all callers. Simple git grep '\->bdrv_\(aio\|co\)_preadv\(_part\)\?' shows that's there three callers of driver function: bdrv_driver_preadv() in block/io.c, passes int64_t, checked by bdrv_check_qiov_request() to be non-negative. qcow2_load_vmstate() does bdrv_check_qiov_request(). do_perform_cow_read() has uint64_t argument. And a lot of things in qcow2 driver are uint64_t, so converting it is big job. But we must not work with requests that don't satisfy bdrv_check_qiov_request(), so let's just assert it here. Still, the functions may be called directly, not only by drv->... Let's check: git grep '\.bdrv_\(aio\|co\)_preadv\(_part\)\?\s*=' | \ awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \ while read func; do git grep "$func(" | \ grep -v "$func(BlockDriverState"; done The only one such caller: QEMUIOVector qiov = QEMU_IOVEC_INIT_BUF(qiov, &data, 1); ... ret = bdrv_replace_test_co_preadv(bs, 0, 1, &qiov, 0); in tests/unit/test-bdrv-drain.c, and it's OK obviously. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210903102807.27127-4-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: fix typos] Signed-off-by: Eric Blake <eblake@redhat.com>
2021-01-28qapi: Use QAPI_LIST_APPEND in trivial casesEric Blake1-6/+3
The easiest spots to use QAPI_LIST_APPEND are where we already have an obvious pointer to the tail of a list. While at it, consistently use the variable name 'tail' for that purpose. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210113221013.390592-5-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-13vmdk: fix maybe uninitialized warningsChristian Borntraeger1-4/+4
Fedora 32 gcc 10 seems to give false positives: Compiling C object libblock.fa.p/block_vmdk.c.o ../block/vmdk.c: In function ‘vmdk_parse_extents’: ../block/vmdk.c:587:5: error: ‘extent’ may be used uninitialized in this function [-Werror=maybe-uninitialized] 587 | g_free(extent->l1_table); | ^~~~~~~~~~~~~~~~~~~~~~~~ ../block/vmdk.c:754:17: note: ‘extent’ was declared here 754 | VmdkExtent *extent; | ^~~~~~ ../block/vmdk.c:620:11: error: ‘extent’ may be used uninitialized in this function [-Werror=maybe-uninitialized] 620 | ret = vmdk_init_tables(bs, extent, errp); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../block/vmdk.c:598:17: note: ‘extent’ was declared here 598 | VmdkExtent *extent; | ^~~~~~ ../block/vmdk.c:1178:39: error: ‘extent’ may be used uninitialized in this function [-Werror=maybe-uninitialized] 1178 | extent->flat_start_offset = flat_offset << 9; | ~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~ ../block/vmdk.c: In function ‘vmdk_open_vmdk4’: ../block/vmdk.c:581:22: error: ‘extent’ may be used uninitialized in this function [-Werror=maybe-uninitialized] 581 | extent->l2_cache = | ~~~~~~~~~~~~~~~~~^ 582 | g_malloc(extent->entry_size * extent->l2_size * L2_CACHE_SIZE); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../block/vmdk.c:872:17: note: ‘extent’ was declared here 872 | VmdkExtent *extent; | ^~~~~~ ../block/vmdk.c: In function ‘vmdk_open’: ../block/vmdk.c:620:11: error: ‘extent’ may be used uninitialized in this function [-Werror=maybe-uninitialized] 620 | ret = vmdk_init_tables(bs, extent, errp); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../block/vmdk.c:598:17: note: ‘extent’ was declared here 598 | VmdkExtent *extent; | ^~~~~~ cc1: all warnings being treated as errors make: *** [Makefile.ninja:884: libblock.fa.p/block_vmdk.c.o] Error 1 fix them by assigning a default value. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Fam Zheng <fam@euphon.net> Message-Id: <20200930155859.303148-2-borntraeger@de.ibm.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-07vmdk: Drop vmdk_co_flush()Max Reitz1-16/+0
Before HEAD^, we needed this because bdrv_co_flush() by itself would only flush bs->file. With HEAD^, bdrv_co_flush() will flush all children on which a WRITE or WRITE_UNCHANGED permission has been taken. Thus, vmdk no longer needs to do it itself. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com>
2020-09-01block/vmdk: Remove superfluous breaksLiao Pingfang1-3/+0
Remove superfluous breaks, as there is a "return" before them. Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn> Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <1594631107-36574-1-git-send-email-wang.yi59@zte.com.cn> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-07-14vmdk: Add trivial backing_fmt supportEric Blake1-0/+14
vmdk already requires that if backing_file is present, that it be another vmdk image (see vmdk_co_do_create). Meanwhile, we want to move towards always being explicit about the backing format for other drivers where it matters. So for convenience, make qemu-img create -F vmdk work, while rejecting all other explicit formats (note that this is only for QemuOpts usage; there is no change to the QAPI to allow a format through -blockdev). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200706203954.341758-5-eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-07-10error: Avoid error_propagate() after migrate_add_blocker()Markus Armbruster1-4/+2
When migrate_add_blocker(blocker, &errp) is followed by error_propagate(errp, err), we can often just as well do migrate_add_blocker(..., errp). Do that with this Coccinelle script: @@ expression blocker, err, errp; expression ret; @@ - ret = migrate_add_blocker(blocker, &err); - if (err) { + ret = migrate_add_blocker(blocker, errp); + if (ret < 0) { ... when != err; - error_propagate(errp, err); ... } @@ expression blocker, err, errp; @@ - migrate_add_blocker(blocker, &err); - if (err) { + if (migrate_add_blocker(blocker, errp) < 0) { ... when != err; - error_propagate(errp, err); ... } Double-check @err is not used afterwards. Dereferencing it would be use after free, but checking whether it's null would be legitimate. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-43-armbru@redhat.com>
2020-07-10error: Eliminate error_propagate() with Coccinelle, part 2Markus Armbruster1-3/+1
When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. The previous commit did that with a Coccinelle script I consider fairly trustworthy. This commit uses the same script with the matching of return taken out, i.e. we convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... } to if (!foo(..., errp)) { ... ... } This is unsound: @err could still be read between afterwards. I don't know how to express "no read of @err without an intervening write" in Coccinelle. Instead, I manually double-checked for uses of @err. Suboptimal line breaks tweaked manually. qdev_realize() simplified further to placate scripts/checkpatch.pl. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-36-armbru@redhat.com>
2020-07-10error: Eliminate error_propagate() with Coccinelle, part 1Markus Armbruster1-2/+1
When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-05-18block: Use bdrv_default_perms()Max Reitz1-1/+1
bdrv_default_perms() can decide which permission profile to use based on the BdrvChildRole, so block drivers do not need to select it explicitly. The blkverify driver now no longer shares the WRITE permission for the image to verify. We thus have to adjust two places in test-block-iothread not to take it. (Note that in theory, blkverify should behave like quorum in this regard and share neither WRITE nor RESIZE for both of its children. In practice, it does not really matter, because blkverify is used only for debugging, so we might as well keep its permissions rather liberal.) Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200513110544.176672-30-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-05-18block: Make format drivers use child_of_bdsMax Reitz1-3/+17
Commonly, they need to pass the BDRV_CHILD_IMAGE set as the BdrvChildRole; but there are exceptions for drivers with external data files (qcow2 and vmdk). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200513110544.176672-26-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-05-18block: Add BdrvChildRole to BdrvChildMax Reitz1-2/+2
For now, it is always set to 0. Later patches in this series will ensure that all callers pass an appropriate combination of flags. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200513110544.176672-6-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-05-18block: Add BlockDriver.is_formatMax Reitz1-0/+1
We want to unify child_format and child_file at some point. One of the important things that set format drivers apart from other drivers is that they do not expect other format nodes under them (except in the backing chain), i.e. we must not probe formats inside of formats. That means we need something on which to distinguish format drivers from others, and hence this flag. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-Id: <20200513110544.176672-3-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-05-08vmdk: Flush only once in vmdk_L2update()Kevin Wolf1-2/+5
If we have a backup L2 table, we currently flush once after writing to the active L2 table and again after writing to the backup table. A single flush is enough and makes things a little less slow. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200430133007.170335-6-kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-05-08vmdk: Don't update L2 table for zero write on zero clusterKevin Wolf1-1/+1
If a cluster is already zeroed, we don't have to call vmdk_L2update(), which is rather slow because it flushes the image file. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200430133007.170335-5-kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-05-08vmdk: Fix partial overwrite of zero clusterKevin Wolf1-6/+12
When overwriting a zero cluster, we must not perform copy-on-write from the backing file, but from a zeroed buffer. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200430133007.170335-4-kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-05-08vmdk: Fix zero cluster allocationKevin Wolf1-5/+7
m_data must contain valid data even for zero clusters when no cluster was allocated in the image file. Without this, zero writes segfault with images that have zeroed_grain=on. For zero writes, we don't want to allocate a cluster in the image file even in compressed files. Fixes: 524089bce43fd1cd3daaca979872451efa2cf7c6 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200430133007.170335-3-kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-05-08vmdk: Rename VmdkMetaData.valid to new_allocationKevin Wolf1-4/+4
m_data is used for zero clusters even though valid == 0. It really only means that a new cluster was allocated in the image file. Rename it to reflect this. While at it, change it from int to bool, too. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200430133007.170335-2-kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-05-05block: Add blk_new_with_bs() helperEric Blake1-5/+4
There are several callers that need to create a new block backend from an existing BDS; make the task slightly easier with a common helper routine. Suggested-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200424190903.522087-2-eblake@redhat.com> [mreitz: Set @ret only in error paths, see https://lists.nongnu.org/archive/html/qemu-block/2020-04/msg01216.html] Signed-off-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200428192648.749066-2-eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-04-30block-backend: Add flags to blk_truncate()Kevin Wolf1-3/+3
Now that node level interface bdrv_truncate() supports passing request flags to the block driver, expose this on the BlockBackend level, too. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200424125448.63318-4-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-04-30block: Add flags to bdrv(_co)_truncate()Kevin Wolf1-1/+1
Now that block drivers can support flags for .bdrv_co_truncate, expose the parameter in the node level interfaces bdrv_co_truncate() and bdrv_truncate(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200424125448.63318-3-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-26block: pass BlockDriver reference to the .bdrv_co_createMaxim Levitsky1-1/+3
This will allow the reuse of a single generic .bdrv_co_create implementation for several drivers. No functional changes. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20200326011218.29230-2-mlevitsk@redhat.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-03-16misc: Replace zero-length arrays with flexible array member (manual)Philippe Mathieu-Daudé1-1/+1
Description copied from Linux kernel commit from Gustavo A. R. Silva (see [3]): --v-- description start --v-- The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member [1], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being unadvertenly introduced [2] to the Linux codebase from now on. --^-- description end --^-- Do the similar housekeeping in the QEMU codebase (which uses C99 since commit 7be41675f7cb). All these instances of code were found with the help of the following command (then manual analysis, without modifying structures only having a single flexible array member, such QEDTable in block/qed.h): git grep -F '[0];' [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=76497732932f [3] https://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux.git/commit/?id=17642a2fbd2c1 Inspired-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-28block: Add @exact parameter to bdrv_co_truncate()Max Reitz1-4/+4
We have two drivers (iscsi and file-posix) that (in some cases) return success from their .bdrv_co_truncate() implementation if the block device is larger than the requested offset, but cannot be shrunk. Some callers do not want that behavior, so this patch adds a new parameter that they can use to turn off that behavior. This patch just adds the parameter and lets the block/io.c and block/block-backend.c functions pass it around. All other callers always pass false and none of the implementations evaluate it, so that this patch does not change existing behavior. Future patches take care of that. Suggested-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190918095144.955-5-mreitz@redhat.com Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
generated by cgit v1.1 at 2024-10-13 03:44:02 +0000