aboutsummaryrefslogtreecommitdiff
path: root/block/vdi.c
AgeCommit message (Collapse)AuthorFilesLines
2021-09-29block: use int64_t instead of uint64_t in driver write handlersVladimir Sementsov-Ogievskiy1-2/+2
We are generally moving to int64_t for both offset and bytes parameters on all io paths. Main motivation is realization of 64-bit write_zeroes operation for fast zeroing large disk chunks, up to the whole disk. We chose signed type, to be consistent with off_t (which is signed) and with possibility for signed return type (where negative value means error). So, convert driver write handlers parameters which are already 64bit to signed type. While being here, convert also flags parameter to be BdrvRequestFlags. Now let's consider all callers. Simple git grep '\->bdrv_\(aio\|co\)_pwritev\(_part\)\?' shows that's there three callers of driver function: bdrv_driver_pwritev() and bdrv_driver_pwritev_compressed() in block/io.c, both pass int64_t, checked by bdrv_check_qiov_request() to be non-negative. qcow2_save_vmstate() does bdrv_check_qiov_request(). Still, the functions may be called directly, not only by drv->... Let's check: git grep '\.bdrv_\(aio\|co\)_pwritev\(_part\)\?\s*=' | \ awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \ while read func; do git grep "$func(" | \ grep -v "$func(BlockDriverState"; done shows several callers: qcow2: qcow2_co_truncate() write at most up to @offset, which is checked in generic qcow2_co_truncate() by bdrv_check_request(). qcow2_co_pwritev_compressed_task() pass the request (or part of the request) that already went through normal write path, so it should be OK qcow: qcow_co_pwritev_compressed() pass int64_t, it's updated by this patch quorum: quorum_co_pwrite_zeroes() pass int64_t and int - OK throttle: throttle_co_pwritev_compressed() pass int64_t, it's updated by this patch vmdk: vmdk_co_pwritev_compressed() pass int64_t, it's updated by this patch Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210903102807.27127-5-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2021-09-29block: use int64_t instead of uint64_t in driver read handlersVladimir Sementsov-Ogievskiy1-2/+2
We are generally moving to int64_t for both offset and bytes parameters on all io paths. Main motivation is realization of 64-bit write_zeroes operation for fast zeroing large disk chunks, up to the whole disk. We chose signed type, to be consistent with off_t (which is signed) and with possibility for signed return type (where negative value means error). So, convert driver read handlers parameters which are already 64bit to signed type. While being here, convert also flags parameter to be BdrvRequestFlags. Now let's consider all callers. Simple git grep '\->bdrv_\(aio\|co\)_preadv\(_part\)\?' shows that's there three callers of driver function: bdrv_driver_preadv() in block/io.c, passes int64_t, checked by bdrv_check_qiov_request() to be non-negative. qcow2_load_vmstate() does bdrv_check_qiov_request(). do_perform_cow_read() has uint64_t argument. And a lot of things in qcow2 driver are uint64_t, so converting it is big job. But we must not work with requests that don't satisfy bdrv_check_qiov_request(), so let's just assert it here. Still, the functions may be called directly, not only by drv->... Let's check: git grep '\.bdrv_\(aio\|co\)_preadv\(_part\)\?\s*=' | \ awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \ while read func; do git grep "$func(" | \ grep -v "$func(BlockDriverState"; done The only one such caller: QEMUIOVector qiov = QEMU_IOVEC_INIT_BUF(qiov, &data, 1); ... ret = bdrv_replace_test_co_preadv(bs, 0, 1, &qiov, 0); in tests/unit/test-bdrv-drain.c, and it's OK obviously. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210903102807.27127-4-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: fix typos] Signed-off-by: Eric Blake <eblake@redhat.com>
2021-03-31block/vdi: Don't assume that blocks are larger than VdiHeaderDavid Edmondson1-4/+6
Given that the block size is read from the header of the VDI file, a wide variety of sizes might be seen. Rather than re-using a block sized memory region when writing the VDI header, allocate an appropriately sized buffer. Signed-off-by: David Edmondson <david.edmondson@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Max Reitz <mreitz@redhat.com> Message-id: 20210325112941.365238-3-pbonzini@redhat.com Message-Id: <20210309144015.557477-3-david.edmondson@oracle.com> Acked-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-03-31block/vdi: When writing new bmap entry fails, don't leak the bufferDavid Edmondson1-0/+1
If a new bitmap entry is allocated, requiring the entire block to be written, avoiding leaking the buffer allocated for the block should the write fail. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Edmondson <david.edmondson@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Max Reitz <mreitz@redhat.com> Message-id: 20210325112941.365238-2-pbonzini@redhat.com Message-Id: <20210309144015.557477-2-david.edmondson@oracle.com> Acked-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-07-10error: Avoid error_propagate() after migrate_add_blocker()Markus Armbruster1-4/+2
When migrate_add_blocker(blocker, &errp) is followed by error_propagate(errp, err), we can often just as well do migrate_add_blocker(..., errp). Do that with this Coccinelle script: @@ expression blocker, err, errp; expression ret; @@ - ret = migrate_add_blocker(blocker, &err); - if (err) { + ret = migrate_add_blocker(blocker, errp); + if (ret < 0) { ... when != err; - error_propagate(errp, err); ... } @@ expression blocker, err, errp; @@ - migrate_add_blocker(blocker, &err); - if (err) { + if (migrate_add_blocker(blocker, errp) < 0) { ... when != err; - error_propagate(errp, err); ... } Double-check @err is not used afterwards. Dereferencing it would be use after free, but checking whether it's null would be legitimate. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-43-armbru@redhat.com>
2020-07-10qapi: Smooth another visitor error checking patternMarkus Armbruster1-5/+2
Convert visit_type_FOO(v, ..., &ptr, &err); ... if (err) { ... } to visit_type_FOO(v, ..., &ptr, errp); ... if (!ptr) { ... } for functions that set @ptr to non-null / null on success / error. Eliminate error_propagate() that are now unnecessary. Delete @err that are now unused. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-40-armbru@redhat.com>
2020-07-06block/vdi: return ZERO block-status when appropriateVladimir Sementsov-Ogievskiy1-2/+1
In case of !VDI_IS_ALLOCATED[], we do zero out the corresponding chunk of qiov. So, this should be reported as ZERO. Note that this changes visible output of "qemu-img map --output=json" and "qemu-io -c map" commands. For qemu-img map, the change is obvious: we just mark as zero what is really zero. For qemu-io it's less obvious: what was unallocated now is allocated. There is an inconsistency in understanding of unallocated regions in Qemu: backing-supporting format-drivers return 0 block-status to report go-to-backing logic for this area. Some protocol-drivers (iscsi) return 0 to report fs-unallocated-non-zero status (i.e., don't occupy space on disk, read result is undefined). BDRV_BLOCK_ALLOCATED is defined as something more close to go-to-backing logic. Still it is calculated as ZERO | DATA, so 0 from iscsi is treated as unallocated. It doesn't influence backing-chain behavior, as iscsi can't have backing file. But it does influence "qemu-io -c map". We should solve this inconsistency at some future point. Now, let's just make backing-not-supporting format drivers (vdi at this patch and vpc with the following) to behave more like backing-supporting drivers and not report 0 block-status. More over, returning ZERO status is absolutely valid thing, and again, corresponds to how the other format-drivers (backing-supporting) work. After block-status update, it never reports 0, so setting unallocated_blocks_are_zero doesn't make sense (as the only user of it is bdrv_co_block_status and it checks unallocated_blocks_are_zero only for unallocated areas). Drop it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200528094405.145708-4-vsementsov@virtuozzo.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-18block: Use bdrv_default_perms()Max Reitz1-1/+1
bdrv_default_perms() can decide which permission profile to use based on the BdrvChildRole, so block drivers do not need to select it explicitly. The blkverify driver now no longer shares the WRITE permission for the image to verify. We thus have to adjust two places in test-block-iothread not to take it. (Note that in theory, blkverify should behave like quorum in this regard and share neither WRITE nor RESIZE for both of its children. In practice, it does not really matter, because blkverify is used only for debugging, so we might as well keep its permissions rather liberal.) Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200513110544.176672-30-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-05-18block: Make format drivers use child_of_bdsMax Reitz1-2/+2
Commonly, they need to pass the BDRV_CHILD_IMAGE set as the BdrvChildRole; but there are exceptions for drivers with external data files (qcow2 and vmdk). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200513110544.176672-26-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-05-18block: Add BdrvChildRole to BdrvChildMax Reitz1-1/+1
For now, it is always set to 0. Later patches in this series will ensure that all callers pass an appropriate combination of flags. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200513110544.176672-6-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-05-18block: Add BlockDriver.is_formatMax Reitz1-0/+1
We want to unify child_format and child_file at some point. One of the important things that set format drivers apart from other drivers is that they do not expect other format nodes under them (except in the backing chain), i.e. we must not probe formats inside of formats. That means we need something on which to distinguish format drivers from others, and hence this flag. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-Id: <20200513110544.176672-3-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-05-05block: Add blk_new_with_bs() helperEric Blake1-4/+4
There are several callers that need to create a new block backend from an existing BDS; make the task slightly easier with a common helper routine. Suggested-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200424190903.522087-2-eblake@redhat.com> [mreitz: Set @ret only in error paths, see https://lists.nongnu.org/archive/html/qemu-block/2020-04/msg01216.html] Signed-off-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200428192648.749066-2-eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-04-30block-backend: Add flags to blk_truncate()Kevin Wolf1-1/+1
Now that node level interface bdrv_truncate() supports passing request flags to the block driver, expose this on the BlockBackend level, too. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200424125448.63318-4-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-26block: pass BlockDriver reference to the .bdrv_co_createMaxim Levitsky1-1/+3
This will allow the reuse of a single generic .bdrv_co_create implementation for several drivers. No functional changes. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20200326011218.29230-2-mlevitsk@redhat.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28block: Add @exact parameter to bdrv_co_truncate()Max Reitz1-1/+1
We have two drivers (iscsi and file-posix) that (in some cases) return success from their .bdrv_co_truncate() implementation if the block device is larger than the requested offset, but cannot be shrunk. Some callers do not want that behavior, so this patch adds a new parameter that they can use to turn off that behavior. This patch just adds the parameter and lets the block/io.c and block/block-backend.c functions pass it around. All other callers always pass false and none of the implementations evaluate it, so that this patch does not change existing behavior. Future patches take care of that. Suggested-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190918095144.955-5-mreitz@redhat.com Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-08-19vdi: Make block_status recurse for fixed imagesMax Reitz1-1/+2
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Fixes: 69f47505ee66afaa513305de0c1895a224e52c45 Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190725155512.9827-2-mreitz@redhat.com Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-08-19vdi: Fix .bdrv_has_zero_init()Max Reitz1-1/+12
Static VDI images cannot guarantee to be zero-initialized. If the image has been statically allocated, forward the call to the underlying storage node. Reported-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Acked-by: Stefano Garzarella <sgarzare@redhat.com> Tested-by: Stefano Garzarella <sgarzare@redhat.com> Message-id: 20190724171239.8764-8-mreitz@redhat.com Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-06-04block: Add BlockBackend.ctxKevin Wolf1-1/+2
This adds a new parameter to blk_new() which requires its callers to declare from which AioContext this BlockBackend is going to be used (or the locks of which AioContext need to be taken anyway). The given context is only stored and kept up to date when changing AioContexts. Actually applying the stored AioContext to the root node is saved for another commit. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-05-10vdi: Replace bdrv_{read,write}() with bdrv_{pread,pwrite}()Alberto Garcia1-6/+9
There's only a couple of bdrv_read() and bdrv_write() calls left in the vdi code, and they can be trivially replaced with the byte-based bdrv_pread() and bdrv_pwrite(). Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-02-01block: Eliminate the S_1KiB, S_2KiB, ... macrosMarkus Armbruster1-1/+2
We define 54 macros for the powers of two >= 1024. We use six, in six macro definitions. Four of them could just as well use the common MiB macro, so do that. The remaining two can't, because they get passed to stringify. Replace the macro by the literal number there. Slightly harder to read in one instance (1048576 vs. S_1MiB), so add a comment there. The other instance is a wash: 65536 vs S_64KiB. 65536 has been good enough for more than seven years there. This effectively reverts commit 540b8492618 and 1240ac558d3. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-02-01uuid: Make qemu_uuid_bswap() take and return a QemuUUIDPeter Maydell1-8/+8
Currently qemu_uuid_bswap() takes a pointer to the QemuUUID to be byte-swapped. This means it can't be used when the UUID to be swapped is in a packed member of a struct. It's also out of line with the general bswap*() functions we provide in bswap.h, which take the value to be swapped and return it. Make qemu_uuid_bswap() take a QemuUUID and return the swapped version. This fixes some clang warnings about taking the address of a packed struct member in block/vdi.c. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-02-01block/vdi: Don't take address of fields in packed structsPeter Maydell1-13/+25
Taking the address of a field in a packed struct is a bad idea, because it might not be actually aligned enough for that pointer type (and thus cause a crash on dereference on some host architectures). Newer versions of clang warn about this. Instead of passing UUID related functions the address of a possibly unaligned QemuUUID struct, use local variables and then copy to/from the struct field as appropriate. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-11-05vdi: Use a literal number of bytes for DEFAULT_CLUSTER_SIZELeonid Bloch1-2/+2
If an expression is used to define DEFAULT_CLUSTER_SIZE, when compiled, it will be embedded as a literal expression in the binary (as the default value) because it is stringified to mark the size of the default value. Now this is fixed by using a defined number to define this value. Signed-off-by: Leonid Bloch <lbloch@janustech.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-11-05block/vdi: Don't take address of fields in packed structsPeter Maydell1-32/+32
Taking the address of a field in a packed struct is a bad idea, because it might not be actually aligned enough for that pointer type (and thus cause a crash on dereference on some host architectures). Newer versions of clang warn about this. Avoid the bug by not using the "modify in place" byte swapping functions. There are a few places where the in-place swap function is used on something other than a packed struct field; we convert those anyway, for consistency. Patch produced with scripts/coccinelle/inplace-byteswaps.cocci. There are other places where we take the address of a packed member in this file for other purposes than passing it to a byteswap function (all the calls to qemu_uuid_*()); we leave those for now. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-02vdi: Use definitions from "qemu/units.h"Philippe Mathieu-Daudé1-4/+3
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Stefan Weil <sw@weilnetz.de> Message-Id: <20180625124238.25339-3-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-15block: Make remaining uses of qobject input visitor more robustMarkus Armbruster1-2/+6
Remaining uses of qobject_input_visitor_new_keyval() in the block subsystem: * block_crypto_open_opts_init() Currently doesn't visit any non-string scalars, thus safe. It's called from - block_crypto_open_luks() Creates the QDict with qemu_opts_to_qdict_filtered(), which creates only string scalars, but has a TODO asking for other types. - qcow_open() - qcow2_open(), qcow2_co_invalidate_cache(), qcow2_reopen_prepare() * block_crypto_create_opts_init(), called from - block_crypto_co_create_opts_luks() Also creates the QDict with qemu_opts_to_qdict_filtered(). * vdi_co_create_opts() Also creates the QDict with qemu_opts_to_qdict_filtered(). Replace these uses by qobject_input_visitor_new_flat_confused() for robustness. This adds crumpling. Right now, that's a no-op, but if we ever extend these things in non-flat ways, crumpling will be needed. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-05-29vdi: Fix vdi_co_do_create() return valueKevin Wolf1-0/+1
.bdrv_co_create() is supposed to return 0 on success, but vdi could return a positive value instead. Fix this. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com>
2018-05-04qobject: Replace qobject_incref/QINCREF qobject_decref/QDECREFMarc-André Lureau1-1/+1
Now that we can safely call QOBJECT() on QObject * as well as its subtypes, we can have macros qobject_ref() / qobject_unref() that work everywhere instead of having to use QINCREF() / QDECREF() for QObject and qobject_incref() / qobject_decref() for its subtypes. The replacement is mechanical, except I broke a long line, and added a cast in monitor_qmp_cleanup_req_queue_locked(). Unlike qobject_decref(), qobject_unref() doesn't accept void *. Note that the new macros evaluate their argument exactly once, thus no need to shout them. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Rebased, semantic conflict resolved, commit message improved] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-03-26vdi: Fix build with CONFIG_VDI_DEBUGKevin Wolf1-12/+10
Use qemu_uuid_unparse() instead of uuid_unparse() to make vdi.c compile again when CONFIG_VDI_DEBUG is set. In order to prevent future bitrot, replace '#ifdef CONFIG_VDI_DEBUG' by 'if (VDI_DEBUG)' so that the compiler always sees the code. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2018-03-26vdi: Change 'static' create option to 'preallocation' in QMPKevin Wolf1-2/+22
What static=on really does is what we call metadata preallocation for other block drivers. While we can still change the QMP interface, make it more consistent by using 'preallocation' for VDI, too. This doesn't implement any new functionality, so the only supported preallocation modes are 'off' and 'metadata' for now. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2018-03-19vdi: Make comments consistent with other driversKevin Wolf1-3/+9
This makes the .bdrv_co_create(_opts) implementation of vdi look more like the other recently converted block drivers. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-03-19vdi: Implement .bdrv_co_createMax Reitz1-5/+19
Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-03-19vdi: Move file creation to vdi_co_create_optsMax Reitz1-18/+28
Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-03-19vdi: Pull option parsing from vdi_co_createMax Reitz1-14/+77
In preparation of QAPI-fying VDI image creation, we have to create a BlockdevCreateOptionsVdi type which is received by a (future) vdi_co_create(). vdi_co_create_opts() now converts the QemuOpts object into such a BlockdevCreateOptionsVdi object. The protocol-layer file is still created in vdi_co_do_create() (and BlockdevCreateOptionsVdi.file is set to an empty string), but that will be addressed by a follow-up patch. Note that cluster-size is not part of the QAPI schema because it is not supported by default. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-03-09block: convert bdrv_check callback to coroutine_fnPaolo Bonzini1-3/+3
Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1516279431-30424-8-git-send-email-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-03-02block: rename .bdrv_create() to .bdrv_co_create_opts()Stefan Hajnoczi1-2/+3
BlockDriver->bdrv_create() has been called from coroutine context since commit 5b7e1542cfa41a281af9629d31cef03704d976e6 ("block: make bdrv_create adopt coroutine"). Make this explicit by renaming to .bdrv_co_create_opts() and add the coroutine_fn annotation. This makes it obvious to block driver authors that they may yield, use CoMutex, or other coroutine_fn APIs. bdrv_co_create is reserved for the QAPI-based version that Kevin is working on. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20170705102231.20711-2-stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-03-02vdi: Switch to .bdrv_co_block_status()Eric Blake1-20/+13
We are gradually moving away from sector-based interfaces, towards byte-based. Update the vdi driver accordingly. Note that the TODO is already covered (the block layer guarantees bounds of its requests), and that we can remove the now-unused s->block_sectors. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-03-02vdi: Avoid bitrot of debugging codeEric Blake1-3/+9
Rework the debug define so that we always get -Wformat checking, even when debugging is disabled. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-02-09Move include qemu/option.h from qemu-common.h to actual usersMarkus Armbruster1-0/+1
qemu-common.h includes qemu/option.h, but most places that include the former don't actually need the latter. Drop the include, and add it to the places that actually need it. While there, drop superfluous includes of both headers, and separate #include from file comment with a blank line. This cleanup makes the number of objects depending on qemu/option.h drop from 4545 (out of 4743) to 284 in my "build everything" tree. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-20-armbru@redhat.com> [Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
2017-07-17vdi: make it thread-safePaolo Bonzini1-24/+24
The VirtualBox driver is using a mutex to order all allocating writes, but it is not protecting accesses to the bitmap because they implicitly happen under the AioContext mutex. Change this to use a CoRwlock explicitly. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20170629132749.997-4-pbonzini@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2017-07-11block: Add PreallocMode to blk_truncate()Max Reitz1-1/+2
blk_truncate() itself will pass that value to bdrv_truncate(), and all callers of blk_truncate() just set the parameter to PREALLOC_MODE_OFF for now. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20170613202107.10125-4-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-05-17migration: Create migration/blocker.hJuan Quintela1-1/+1
This allows us to remove lots of includes of migration/migration.h Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-04-28block: Add errp to b{lk,drv}_truncate()Max Reitz1-2/+2
For one thing, this allows us to drop the error message generation from qemu-img.c and blockdev.c and instead have it unified in bdrv_truncate(). Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20170328205129.15138-3-mreitz@redhat.com Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-02-28block: Add BDRV_O_RESIZE for blk_new_open()Kevin Wolf1-1/+2
blk_new_open() is a convenience function that processes flags rather than QDict options as a simple way to just open an image file. In order to keep it convenient in the future, it must automatically request the necessary permissions. This can easily be inferred from the flags for read and write, but we need another flag that tells us whether to get the resize permission. We can't just always request it because that means that no block jobs can run on the resulting BlockBackend (which is something that e.g. qemu-img commit wants to do), but we also can't request it never because most of the .bdrv_create() implementations call blk_truncate(). The solution is to introduce another flag that is passed by all users that want to resize the image. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2017-02-28block: Request child permissions in format driversKevin Wolf1-0/+1
This makes use of the .bdrv_child_perm() implementation for formats that we just added. All format drivers expose the permissions they actually need nows, so that they can be set accordingly and updated when parents are attached or detached. The only format not included here is raw, which was already converted with the other filter drivers. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Fam Zheng <famz@redhat.com>
2017-02-24block: Attach bs->file only during .bdrv_open()Kevin Wolf1-0/+6
The way that attaching bs->file worked was a bit unusual in that it was the only child that would be attached to a node which is not opened yet. Because of this, the block layer couldn't know yet which permissions the driver would eventually need. This patch moves the point where bs->file is attached to the beginning of the individual .bdrv_open() implementations, so drivers already know what they are going to do with the child. This is also more consistent with how driver-specific children work. For a moment, bdrv_open() gets its own BdrvChild to perform image probing, but instead of directly assigning this BdrvChild to the BDS, it becomes a temporary one and the node name is passed as an option to the drivers, so that they can simply use bdrv_open_child() to create another reference for their own use. This duplicated child for (the not opened yet) bs is not the final state, a follow-up patch will change the image probing code to use a BlockBackend, which is completely independent of bs. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2017-01-24migration: disallow migrate_add_blocker during migrationAshijeet Acharya1-1/+7
If a migration is already in progress and somebody attempts to add a migration blocker, this should rightly fail. Add an errp parameter and a retcode return value to migrate_add_blocker. Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com> Message-Id: <1484566314-3987-5-git-send-email-ashijeetacharya@gmail.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Acked-by: Greg Kurz <groug@kaod.org> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Merged with recent 'Allow invtsc migration' change
2016-09-23vdi: Use QEMU UUID APIFam Zheng1-56/+17
The UUID operations we need from libuuid are fully supported by QEMU UUID implementation. Use it, and remove the unused code. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-Id: <1474432046-325-5-git-send-email-famz@redhat.com>
2016-07-05block: Convert bdrv_co_preadv/pwritev to BdrvChildKevin Wolf1-2/+2
This is the final patch for converting the common I/O path to take a BdrvChild parameter instead of BlockDriverState. The completion of this conversion means that all users that perform I/O on an image need to actually hold a reference (in the form of BdrvChild, possible as part of a BlockBackend) to that image. This also protects against inconsistent use of BlockBackend vs. BlockDriverState functions because direct use of a BlockDriverState isn't possible any more and blk->root is private for block-backends.c. In addition, we can now distinguish different users in the I/O path, and the future op blockers work is going to add assertions based on permissions stored in BdrvChild. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-05block: Convert bdrv_pwrite(v/_sync) to BdrvChildKevin Wolf1-1/+1
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.1 at 2024-08-21 08:48:50 +0000