aboutsummaryrefslogtreecommitdiff
path: root/block/rbd.c
AgeCommit message (Collapse)AuthorFilesLines
2018-03-09rbd: Use qemu_rbd_connect() in qemu_rbd_do_create()Kevin Wolf1-44/+10
This is almost exactly the same code. The differences are that qemu_rbd_connect() supports BlockdevOptionsRbd.server and that the cache mode is set explicitly. Supporting 'server' is a welcome new feature for image creation. Caching is disabled by default, so leave it that way. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-03-09rbd: Assign s->snap/image_name in qemu_rbd_open()Kevin Wolf1-9/+5
Now that the options are already available in qemu_rbd_open() and not only parsed in qemu_rbd_connect(), we can assign s->snap and s->image_name there instead of passing the fields by reference to qemu_rbd_connect(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-03-09rbd: Support .bdrv_co_createKevin Wolf1-50/+100
This adds the .bdrv_co_create driver callback to rbd, which enables image creation over QMP. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-03-09rbd: Pass BlockdevOptionsRbd to qemu_rbd_connect()Kevin Wolf1-60/+55
With the conversion to a QAPI options object, the function is now prepared to be used in a .bdrv_co_create implementation. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-03-09rbd: Remove non-schema options from runtime_optsKevin Wolf1-31/+24
Instead of the QemuOpts in qemu_rbd_connect(), we want to use QAPI objects. As a preparation, fetch those options directly from the QDict that .bdrv_open() supports in the rbd driver and that are not in the schema. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-03-09rbd: Factor out qemu_rbd_connect()Kevin Wolf1-40/+60
The code to establish an RBD connection is duplicated between open and create. In order to be able to share the code, factor out the code from qemu_rbd_open() as a first step. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-03-09rbd: Fix use after free in qemu_rbd_set_keypairs() error pathKevin Wolf1-1/+2
If we want to include the invalid option name in the error message, we can't free the string earlier than that. Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2018-03-09block: convert bdrv_invalidate_cache callback to coroutine_fnPaolo Bonzini1-3/+3
QED's bdrv_invalidate_cache implementation would like to reuse functions that acquire/release the metadata locks. Call it from coroutine context to simplify the logic. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1516279431-30424-6-git-send-email-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-03-02block: rename .bdrv_create() to .bdrv_co_create_opts()Stefan Hajnoczi1-2/+4
BlockDriver->bdrv_create() has been called from coroutine context since commit 5b7e1542cfa41a281af9629d31cef03704d976e6 ("block: make bdrv_create adopt coroutine"). Make this explicit by renaming to .bdrv_co_create_opts() and add the coroutine_fn annotation. This makes it obvious to block driver authors that they may yield, use CoMutex, or other coroutine_fn APIs. bdrv_co_create is reserved for the QAPI-based version that Kevin is working on. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20170705102231.20711-2-stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-02-09Move include qemu/option.h from qemu-common.h to actual usersMarkus Armbruster1-0/+1
qemu-common.h includes qemu/option.h, but most places that include the former don't actually need the latter. Drop the include, and add it to the places that actually need it. While there, drop superfluous includes of both headers, and separate #include from file comment with a blank line. This cleanup makes the number of objects depending on qemu/option.h drop from 4545 (out of 4743) to 284 in my "build everything" tree. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-20-armbru@redhat.com> [Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
2018-02-09Include qapi/qmp/qdict.h exactly where neededMarkus Armbruster1-0/+1
This cleanup makes the number of objects depending on qapi/qmp/qdict.h drop from 4550 (out of 4743) to 368 in my "build everything" tree. For qapi/qmp/qobject.h, the number drops from 4552 to 390. While there, separate #include from file comment with a blank line. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-13-armbru@redhat.com>
2018-02-09Include qapi/qmp/qlist.h exactly where neededMarkus Armbruster1-0/+1
This cleanup makes the number of objects depending on qapi/qmp/qlist.h drop from 4551 (out of 4743) to 16 in my "build everything" tree. While there, separate #include from file comment with a blank line. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-12-armbru@redhat.com>
2017-11-17block: Deprecate bdrv_set_read_only() and usersKevin Wolf1-4/+10
bdrv_set_read_only() is used by some block drivers to override the read-only option given by the user. This is not how read-only images generally work in QEMU: Instead of second guessing what the user really meant (which currently includes making an image read-only even if the user didn't only use the default, but explicitly said read-only=off), we should error out if we can't provide what the user requested. This adds deprecation warnings to all callers of bdrv_set_read_only() so that the behaviour can be corrected after the usual deprecation period. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-09-04qapi: Mechanically convert FOO_lookup[...] to FOO_str(...)Markus Armbruster1-1/+1
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503564371-26090-14-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-07-14Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2017-07-13' ↵Peter Maydell1-3/+3
into staging Error reporting patches for 2017-07-13 # gpg: Signature made Thu 13 Jul 2017 12:55:45 BST # gpg: using RSA key 0x3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-error-2017-07-13: Convert error_report*_err() to warn_report*_err() error: Implement the warn and free Error functions char-socket: Report TCP socket waiting as information Convert error_report() to warn_report() error: Functions to report warnings and informational messages util/qemu-error: Rename error_print_loc() to be more generic websock: Don't try to set *errp directly block: Don't try to set *errp directly xilinx: Fix latent error handling bug Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-13Convert error_report() to warn_report()Alistair Francis1-3/+3
Convert all uses of error_report("warning:"... to use warn_report() instead. This helps standardise on a single method of printing warnings to the user. All of the warnings were changed using these two commands: find ./* -type f -exec sed -i \ 's|error_report(".*warning[,:] |warn_report("|Ig' {} + Indentation fixed up manually afterwards. The test-qdev-global-props test case was manually updated to ensure that this patch passes make check (as the test cases are case sensitive). Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Suggested-by: Thomas Huth <thuth@redhat.com> Cc: Jeff Cody <jcody@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Lieven <pl@kamp.de> Cc: Josh Durgin <jdurgin@redhat.com> Cc: "Richard W.M. Jones" <rjones@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Greg Kurz <groug@kaod.org> Cc: Rob Herring <robh@kernel.org> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Peter Chubb <peter.chubb@nicta.com.au> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Alexander Graf <agraf@suse.de> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Greg Kurz <groug@kaod.org> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed by: Peter Chubb <peter.chubb@data61.csiro.au> Acked-by: Max Reitz <mreitz@redhat.com> Acked-by: Marcel Apfelbaum <marcel@redhat.com> Message-Id: <e1cfa2cd47087c248dd24caca9c33d9af0c499b0.1499866456.git.alistair.francis@xilinx.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-07-11block: Add PreallocMode to BD.bdrv_truncate()Max Reitz1-1/+8
Add a PreallocMode parameter to the bdrv_truncate() function implemented by each block driver. Currently, we always pass PREALLOC_MODE_OFF and no driver accepts anything else. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20170613202107.10125-2-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-06-26block: change variable names in BlockDriverStateManos Pitsidianakis1-2/+2
Change the 'int count' parameter in *pwrite_zeros, *pdiscard related functions (and some others) to 'int bytes', as they both refer to bytes. This helps with code legibility. Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr> Message-id: 20170609101808.13506-1-el13635@mail.ntua.gr Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-06-14block/rbd: enable filename option and parsingJeff Cody1-1/+21
When enabling option parsing and blockdev-add for rbd, we removed the 'filename' option. Unfortunately, this was a bit optimistic, as previous versions of QEMU allowed the use of the option in backing filenames via json. This means that without parsing this option, we cannot open existing images that used to work fine. See bug: https://bugzilla.redhat.com/show_bug.cgi?id=1457088 Tested-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Message-id: 937dc9fde348d13311eb8e23444df3bc3190b612.1497444637.git.jcody@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-05-09qobject: Use simpler QDict/QList scalar insertion macrosEric Blake1-8/+8
We now have macros in place to make it less verbose to add a scalar to QDict and QList, so use them. Patch created mechanically via: spatch --sp-file scripts/coccinelle/qobject.cocci \ --macro-file scripts/cocci-macro-file.h --dir . --in-place then touched up manually to fix a couple of '?:' back to original spacing, as well as avoiding a long line in monitor.c. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20170427215821.19397-7-eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-04-28block: Add .bdrv_truncate() error messagesMax Reitz1-0/+1
Add missing error messages for the block driver implementations of .bdrv_truncate(); drop the generic one from block.c's bdrv_truncate(). Since one of these changes touches a mis-indented block in block/file-posix.c, this patch fixes that coding style issue along the way. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20170328205129.15138-5-mreitz@redhat.com Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-04-28block: Add errp to BD.bdrv_truncate()Max Reitz1-1/+1
Add an Error parameter to the block drivers' bdrv_truncate() interface. If a block driver does not set this in case of an error, the generic bdrv_truncate() implementation will do so. Where it is obvious, this patch also makes some block drivers set this value. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20170328205129.15138-4-mreitz@redhat.com Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-04-24block/rbd: Add support for reopen()Jeff Cody1-0/+21
This adds support for reopen in rbd, for changing between r/w and r/o. Note, that this is only a flag change, but we will block a change from r/o to r/w if we are using an RBD internal snapshot. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: d4e87539167ec6527d44c97b164eabcccf96e4f3.1491597120.git.jcody@redhat.com
2017-04-24block/rbd - update variable names to more apt namesJeff Cody1-16/+17
Update 'clientname' to be 'user', which tracks better with both the QAPI and rados variable naming. Update 'name' to be 'image_name', as it indicates the rbd image. Naming it 'image' would have been ideal, but we are using that for the rados_image_t value returned by rbd_open(). Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: b7ec1fb2e1cf36f9b6911631447a5b0422590b7d.1491597120.git.jcody@redhat.com
2017-04-24block: do not set BDS read_only if copy_on_read enabledJeff Cody1-1/+10
A few block drivers will set the BDS read_only flag from their .bdrv_open() function. This means the bs->read_only flag could be set after we enable copy_on_read, as the BDRV_O_COPY_ON_READ flag check occurs prior to the call to bdrv->bdrv_open(). This adds an error return to bdrv_set_read_only(), and an error will be return if we try to set the BDS to read_only while copy_on_read is enabled. This patch also changes the behavior of vvfat. Before, vvfat could override the drive 'readonly' flag with its own, internal 'rw' flag. For instance, this -drive parameter would result in a writable image: "-drive format=vvfat,dir=/tmp/vvfat,rw,if=virtio,readonly=on" This is not correct. Now, attempting to use the above -drive parameter will result in an error (i.e., 'rw' is incompatible with 'readonly=on'). Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 0c5b4c1cc2c651471b131f21376dfd5ea24d2196.1491597120.git.jcody@redhat.com
2017-04-24block: add bdrv_set_read_only() helper functionJeff Cody1-1/+1
We have a helper wrapper for checking for the BDS read_only flag, add a helper wrapper to set the read_only flag as well. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 9b18972d05f5fa2ac16c014f0af98d680553048d.1491597120.git.jcody@redhat.com
2017-04-03block: Document -drive problematic code and bugsMarkus Armbruster1-0/+6
-blockdev and blockdev_add convert their arguments via QObject to BlockdevOptions for qmp_blockdev_add(), which converts them back to QObject, then to a flattened QDict. The QDict's members are typed according to the QAPI schema. -drive converts its argument via QemuOpts to a (flat) QDict. This QDict's members are all QString. Thus, the QType of a flat QDict member depends on whether it comes from -drive or -blockdev/blockdev_add, except when the QAPI type maps to QString, which is the case for 'str' and enumeration types. The block layer core extracts generic configuration from the flat QDict, and the block driver extracts driver-specific configuration. Both commonly do so by converting (parts of) the flat QDict to QemuOpts, which turns all values into strings. Not exactly elegant, but correct. However, A few places access the flat QDict directly: * Most of them access members that are always QString. Correct. * bdrv_open_inherit() accesses a boolean, carefully. Correct. * nfs_config() uses a QObject input visitor. Correct only because the visited type contains nothing but QStrings. * nbd_config() and ssh_config() use a QObject input visitor, and the visited types contain non-QStrings: InetSocketAddress members @numeric, @to, @ipv4, @ipv6. -drive works as long as you don't try to use them (they're all optional). @to is ignored anyway. Reproducer: -drive driver=ssh,server.host=h,server.port=22,server.ipv4,path=p -drive driver=nbd,server.type=inet,server.data.host=h,server.data.port=22,server.data.ipv4 both fail with "Invalid parameter type for 'data.ipv4', expected: boolean" Add suitable comments to all these places. Mark the buggy ones FIXME. "Fortunately", -drive's driver-specific options are entirely undocumented. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-id: 1490895797-29094-5-git-send-email-armbru@redhat.com [mreitz: Fixed two typos] Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-03-31rbd: Fix regression in legacy key/values containing escaped :Eric Blake1-43/+44
Commit c7cacb3 accidentally broke legacy key-value parsing through pseudo-filename parsing of -drive file=rbd://..., for any key that contains an escaped ':'. Such a key is surprisingly common, thanks to mon_host specifying a 'host:port' string. The break happens because passing things from QDict through QemuOpts back to another QDict requires that we pack our parsed key/value pairs into a string, and then reparse that string, but the intermediate string that we created ("key1=value1:key2=value2") lost the \: escaping that was present in the original, so that we could no longer see which : were used as separators vs. those used as part of the original input. Fix it by collecting the key/value pairs through a QList, and sending that list on a round trip through a JSON QString (as in '["key1","value1","key2","value2"]') on its way through QemuOpts, rather than hand-rolling our own string. Since the string is only handled internally, this was faster than creating a full-blown struct of '[{"key1":"value1"},{"key2":"value2"}]', and safer at guaranteeing order compared to '{"key1":"value1","key2":"value2"}'. It would be nicer if we didn't have to round-trip through QemuOpts in the first place, but that's a much bigger task for later. Reproducer: ./x86_64-softmmu/qemu-system-x86_64 -nodefaults -nographic -qmp stdio \ -drive 'file=rbd:volumes/volume-ea141b5c-cdb3-4765-910d-e7008b209a70'\ ':id=compute:key=AQAVkvxXAAAAABAA9ZxWFYdRmV+DSwKr7BKKXg=='\ ':auth_supported=cephx\;none:mon_host=192.168.1.2\:6789'\ ',format=raw,if=none,id=drive-virtio-disk0,'\ 'serial=ea141b5c-cdb3-4765-910d-e7008b209a70,cache=writeback' Even without an RBD setup, this serves a test of whether we get the incorrect parser error of: qemu-system-x86_64: -drive file=rbd:...cache=writeback: conf option 6789 has no value or the correct behavior of hanging while trying to connect to the requested mon_host of 192.168.1.2:6789. Reported-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com> Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 20170331152730.12514-1-eblake@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-03-28rbd: Fix bugs around -drive parameter "server"Markus Armbruster1-95/+32
qemu_rbd_open() takes option parameters as a flattened QDict, with keys of the form server.%d.host, server.%d.port, where %d counts up from zero. qemu_rbd_array_opts() extracts these values as follows. First, it calls qdict_array_entries() to find the list's length. For each list element, it formats the list's key prefix (e.g. "server.0."), then creates a new QDict holding the options with that key prefix, then converts that to a QemuOpts, so it can finally get the member values from there. If there's one surefire way to make code using QDict more awkward, it's creating more of them and mixing in QemuOpts for good measure. The extraction of keys starting with server.%d into another QDict makes us ignore parameters like server.0.neither-host-nor-port silently. The conversion to QemuOpts abuses runtime_opts, as described a few commits ago. Rewrite to simply get the values straight from the options QDict. Fixes -drive not to crash when server.*.* are present, but server.*.host is absent. Fixes -drive to reject invalid server.*.*. Permits cleaning up runtime_opts. Do that, and fix -drive to reject bogus parameters host and port instead of silently ignoring them. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-id: 1490691368-32099-11-git-send-email-armbru@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-03-28rbd: Revert -blockdev and -drive parameter auth-supportedMarkus Armbruster1-28/+3
This reverts half of commit 0a55679. We're having second thoughts on the QAPI schema (and thus the external interface), and haven't reached consensus, yet. Issues include: * The implementation uses deprecated rados_conf_set() key "auth_supported". No biggie. * The implementation makes -drive silently ignore invalid parameters "auth" and "auth-supported.*.X" where X isn't "auth". Fixable (in fact I'm going to fix similar bugs around parameter server), so again no biggie. * BlockdevOptionsRbd member @password-secret applies only to authentication method cephx. Should it be a variant member of RbdAuthMethod? * BlockdevOptionsRbd member @user could apply to both methods cephx and none, but I'm not sure it's actually used with none. If it isn't, should it be a variant member of RbdAuthMethod? * The client offers a *set* of authentication methods, not a list. Should the methods be optional members of BlockdevOptionsRbd instead of members of list @auth-supported? The latter begs the question what multiple entries for the same method mean. Trivial question now that RbdAuthMethod contains nothing but @type, but less so when RbdAuthMethod acquires other members, such the ones discussed above. * How BlockdevOptionsRbd member @auth-supported interacts with settings from a configuration file specified with @conf is undocumented. I suspect it's untested, too. Let's avoid painting ourselves into a corner now, and revert the feature for 2.9. Note that users can still configure authentication methods with a configuration file. They probably do that anyway if they use Ceph outside QEMU as well. Further note that this doesn't affect use of key "auth-supported" in -drive file=rbd:...:key=value. qemu_rbd_array_opts()'s parameter @type now must be RBD_MON_HOST, which is silly. This will be cleaned up shortly. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-id: 1490691368-32099-9-git-send-email-armbru@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-03-28rbd: Clean up qemu_rbd_create()'s detour through QemuOptsMarkus Armbruster1-15/+5
The conversion from QDict to QemuOpts is pointless. Simply get the stuff straight from the QDict. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-id: 1490691368-32099-8-git-send-email-armbru@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-03-28rbd: Clean up runtime_opts, fix -drive to reject filenameMarkus Armbruster1-14/+24
runtime_opts is used for three different purposes: * qemu_rbd_open() uses it to accept options it recognizes, such as "pool" and "image". Other .bdrv_open() methods do it similarly. * qemu_rbd_open() accepts additional list-valued options auth-supported and server, with the help of qemu_rbd_array_opts(). The list elements are again dictionaries. qemu_rbd_array_opts() uses runtime_opts to accept their members. Thus, runtime_opts contains recognized sub-sub-options "auth", "host", "port" in addition to recognized options. No other block driver does that. * qemu_rbd_create() uses it to convert the QDict produced by qemu_rbd_parse_filename() to QemuOpts. No other block driver does that. The keys produced by qemu_rbd_parse_filename() are "pool", "image", "snapshot", "conf", "user" and "keyvalue-pairs". qemu_rbd_open() accepts these, so no additional ones here. This is a confusing mess. Dates back to commit 0f9d252. First step to clean it up is documenting runtime_opts.desc[]: * Reorder entries to match the QAPI schema, like we do in other block drivers. * Document why the schema's "server" and "auth-supported" aren't in .desc[]. * Document why "keyvalue-pairs", "host", "port" and "auth" are in .desc[], but not the schema. * Delete "filename", because none of the three users actually uses it. This fixes -drive to reject parameter filename instead of silently ignoring it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-id: 1490691368-32099-7-git-send-email-armbru@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-03-28rbd: Don't accept -drive driver=rbd, keyvalue-pairs=...Markus Armbruster1-4/+8
The way we communicate extra key-value pairs from qemu_rbd_parse_filename() to qemu_rbd_open() exposes option parameter "keyvalue-pairs" on the command line. It's not wanted there. Hack: rename the parameter to "=keyvalue-pairs" to make it inaccessible. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-id: 1490691368-32099-6-git-send-email-armbru@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-03-28rbd: Clean up after the previous commitMarkus Armbruster1-15/+9
This code in qemu_rbd_parse_filename() found_str = qemu_rbd_next_tok(p, '\0', &p); p = found_str; has no effect. Drop it, and simplify qemu_rbd_next_tok(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-id: 1490691368-32099-5-git-send-email-armbru@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-03-28rbd: Don't limit length of parameter valuesMarkus Armbruster1-77/+14
We laboriously enforce that parameter values are between one and some arbitrary limit in length. Only RBD_MAX_IMAGE_NAME_SIZE comes from librbd.h, and I'm not sure it applies. Where the other limits come from is unclear. Drop the length checking. The limits librbd actually imposes must be checked by librbd anyway. There's one minor complication: BDRVRBDState member name is a fixed-size array. Depends on the length limit. Make it a pointer to a dynamically allocated string. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-id: 1490691368-32099-4-git-send-email-armbru@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-03-28rbd: Fix to cleanly reject -drive without pool or imageMarkus Armbruster1-3/+7
qemu_rbd_open() neglects to check pool and image are present. Missing image is caught by rbd_open(), but missing pool crashes. Reproducer: $ qemu-system-x86_64 -nodefaults -drive driver=rbd,id=rbd,image=i,... terminate called after throwing an instance of 'std::logic_error' what(): basic_string::_M_construct null not valid Aborted (core dumped) where ... is a working server.0.{host,port} configuration. Doesn't affect -drive with file=..., because qemu_rbd_parse_filename() always sets both pool and image. Doesn't affect -blockdev, because pool and image are mandatory in the QAPI schema. Fix by adding the missing checks. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-id: 1490691368-32099-3-git-send-email-armbru@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-03-01block/rbd: add support for 'mon_host', 'auth_supported' via QAPIJeff Cody1-0/+135
This adds support for three additional options that may be specified by QAPI in blockdev-add: server: host, port auth method: either 'cephx' or 'none' The "server" and "auth-supported" QAPI parameters are arrays. To conform with the rados API, the array items are join as a single string with a ';' character as a delimiter when setting the configuration values. Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-02-28block/rbd: parse all options via bdrv_parse_filenameJeff Cody1-148/+151
Get rid of qemu_rbd_parsename in favor of bdrv_parse_filename. This simplifies a lot of the parsing as well, as we can treat everything a bit simpler since nonexistent options are simply NULL pointers instead of empty strings. An important item to note: Ceph has many extra option values that can be specified as key/value pairs. This was handled previously in the driver by extracting the values that the QEMU driver cared about, and then blindly passing all extra options to rbd after splitting them into key/value pairs, and cleaning up any special character escaping. The practice is continued in this patch; there is an option "keyvalue-pairs" that is populated with all the key/value pairs that the QEMU driver does not care about. These key/value pairs will override any settings in the 'conf' configuration file, just as they did before. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-02-28block/rbd: add all the currently supported runtime_optsJeff Cody1-19/+49
This adds all the currently supported runtime opts, which are the options as parsed from the filename. All of these options are explicitly checked for during during runtime, with an exception to the "keyvalue-pairs" option. This option contains all the key/value pairs that the QEMU rbd driver merely unescapes, and passes along blindly to rados. This option is a "legacy" option, and will not be exposed in the QAPI or available for introspection. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-02-28block/rbd: don't copy strings in qemu_rbd_next_tok()Jeff Cody1-35/+64
This patch is prep work for parsing options for .bdrv_parse_filename, and using QDict options. The function qemu_rbd_next_tok() searched for various key/value pairs, and copied them into buffers. This will soon be an unnecessary extra step, so we will now return found strings by reference only, and offload the responsibility for safely handling/coping these strings to the caller. This also cleans up error handling some, as the callers now rely on the Error object to determine if there is a parse error. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-02-24RBD: Add support readv,writev for rbdtianqing1-24/+56
Rbd can do readv and writev directly, so wo do not need to transform iov to buf or vice versa any more. Signed-off-by: tianqing <tianqing@unitedstack.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-11-01rbd: make the code more readableXiubo Li1-13/+12
Make it a bit clearer and more readable. Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-id: 1476519973-6436-1-git-send-email-lixiubo@cmss.chinamobile.com CC: John Snow <jsnow@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-10-23rbd: shift byte count as a 64-bit valuePaolo Bonzini1-2/+2
Otherwise, reads of more than 2GB fail. Until commit 7bbca9e290a9c7c217b5a24fc6094e91e54bd05d, reads of 2^41 bytes succeeded at least theoretically. In fact, pdiscard ought to receive a 64-bit integer as the count for the same reason. Reported by Coverity. Fixes: 7bbca9e290a9c7c217b5a24fc6094e91e54bd05d Cc: qemu-stable@nongnu.org Cc: kwolf@redhat.com Cc: eblake@redhat.com Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-07block: use aio_bh_schedule_oneshotPaolo Bonzini1-6/+2
This simplifies bottom half handlers by removing calls to qemu_bh_delete and thus removing the need to stash the bottom half pointer in the opaque datum. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-20block: Convert .bdrv_aio_discard() to byte-basedEric Blake1-8/+7
Another step towards byte-based interfaces everywhere. Replace the sector-based driver callback .bdrv_aio_discard() with a new byte-based .bdrv_aio_pdiscard(). Only raw-posix and RBD drivers are affected, so it was not worth splitting into multiple patches. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1468624988-423-9-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-20rbd: Switch rbd_start_aio() to byte-basedEric Blake1-9/+9
The internal function converts to byte-based before calling into RBD code; hoist the conversion to the callers so that callers can then be switched to byte-based themselves. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1468624988-423-8-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20coccinelle: Remove unnecessary variables for function return valueEduardo Habkost1-3/+1
Use Coccinelle script to replace 'ret = E; return ret' with 'return E'. The script will do the substitution only when the function return type and variable type are the same. Manual fixups: * audio/audio.c: coding style of "read (...)" and "write (...)" * block/qcow2-cluster.c: wrap line to make it shorter * block/qcow2-refcount.c: change indentation of wrapped line * target-tricore/op_helper.c: fix coding style of "remainder|quotient" * target-mips/dsp_helper.c: reverted changes because I don't want to argue about checkpatch.pl * ui/qemu-pixman.c: fix line indentation * block/rbd.c: restore blank line between declarations and statements Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1465855078-19435-4-git-send-email-ehabkost@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Unused Coccinelle rule name dropped along with a redundant comment; whitespace touched up in block/qcow2-cluster.c; stale commit message paragraph deleted] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-16rbd:change error_setg() to error_setg_errno()Vikhyat Umrao1-15/+23
Ceph RBD block driver does not use error_setg_errno() where it is possible to use. This patch replaces error_setg() from error_setg_errno(). Signed-off-by: Vikhyat Umrao <vumrao@redhat.com> Message-id: 1462780319-5796-1-git-send-email-vumrao@redhat.com Reviewed-by: Josh Durgin <jdurgin@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-03-22util: move declarations out of qemu-common.hVeronia Bahaa1-1/+1
Move declarations out of qemu-common.h for functions declared in utils/ files: e.g. include/qemu/path.h for utils/path.c. Move inline functions out of qemu-common.h and into new files (e.g. include/qemu/bcd.h) Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster1-0/+1
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>