aboutsummaryrefslogtreecommitdiff
path: root/block/raw-posix.c
AgeCommit message (Collapse)AuthorFilesLines
2014-09-29raw-posix: Fix build without posix_fallocate()Kevin Wolf1-4/+14
Check for the presence of posix_fallocate() in configure and only compile in support for PREALLOC_MODE_FALLOC when it's there. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-12raw-posix: Add falloc and full preallocation optionHu Tao1-19/+73
This patch adds a new option preallocation for raw format, and implements falloc and full preallocation. Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-09-12block: don't convert file size to sector sizeHu Tao1-6/+6
and avoid converting it back later. Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Benoît Canet <benoit.canet@nodalink.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-09-12block: round up file size to nearest sectorHu Tao1-4/+4
Currently the file size requested by user is rounded down to nearest sector, causing the actual file size could be a bit less than the size user requested. Since some formats (like qcow2) record virtual disk size in bytes, this can make the last few bytes cannot be accessed. This patch fixes it by rounding up file size to nearest sector so that the actual file size is no less than the requested file size. Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-22raw-posix: fix O_DIRECT short readsStefan Hajnoczi1-0/+9
The following O_DIRECT read from a <512 byte file fails: $ truncate -s 320 test.img $ qemu-io -n -c 'read -P 0 0 512' test.img qemu-io: can't open device test.img: Could not read image for determining its format: Invalid argument Note that qemu-io completes successfully without the -n (O_DIRECT) option. This patch fixes qemu-iotests ./check -nocache -vmdk 059. Cc: qemu-stable@nongnu.org Suggested-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-20block: Use g_new() & friends where that makes obvious senseMarkus Armbruster1-1/+1
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer, for two reasons. One, it catches multiplication overflowing size_t. Two, it returns T * rather than void *, which lets the compiler catch more type errors. Patch created with Coccinelle, with two manual changes on top: * Add const to bdrv_iterate_format() to keep the types straight * Convert the allocation in bdrv_drop_intermediate(), which Coccinelle inexplicably misses Coccinelle semantic patch: @@ type T; @@ -g_malloc(sizeof(T)) +g_new(T, 1) @@ type T; @@ -g_try_malloc(sizeof(T)) +g_try_new(T, 1) @@ type T; @@ -g_malloc0(sizeof(T)) +g_new0(T, 1) @@ type T; @@ -g_try_malloc0(sizeof(T)) +g_try_new0(T, 1) @@ type T; expression n; @@ -g_malloc(sizeof(T) * (n)) +g_new(T, n) @@ type T; expression n; @@ -g_try_malloc(sizeof(T) * (n)) +g_try_new(T, n) @@ type T; expression n; @@ -g_malloc0(sizeof(T) * (n)) +g_new0(T, n) @@ type T; expression n; @@ -g_try_malloc0(sizeof(T) * (n)) +g_try_new0(T, n) @@ type T; expression p, n; @@ -g_realloc(p, sizeof(T) * (n)) +g_renew(T, p, n) @@ type T; expression p, n; @@ -g_try_realloc(p, sizeof(T) * (n)) +g_try_renew(T, p, n) Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-15raw-posix: Handle failure for potentially large allocationsKevin Wolf1-1/+5
Some code in the block layer makes potentially huge allocations. Failure is not completely unexpected there, so avoid aborting qemu and handle out-of-memory situations gracefully. This patch addresses the allocations in the raw-posix block driver. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-18raw-posix: Fail gracefully if no working alignment is foundKevin Wolf1-8/+27
If qemu couldn't find out what O_DIRECT alignment to use with a given file, it would run into assert(bdrv_opt_mem_align(bs) != 0); in block.c and confuse users. This adds a more descriptive error message for such cases. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-18block: Add Error argument to bdrv_refresh_limits()Kevin Wolf1-3/+1
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-14block: Assert qiov length matches request lengthKevin Wolf1-4/+11
At least raw-posix relies on this because it can allocate bounce buffers based on the request length, but access it using all of the qiov entries later. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-07-07linux-aio: implement io plug, unplug and flush io queueMing Lei1-0/+45
This patch implements .bdrv_io_plug, .bdrv_io_unplug and .bdrv_flush_io_queue callbacks for linux-aio Block Drivers, so that submitting I/O as a batch can be supported on linux-aio. [Unprocessed requests are completed with -EIO instead of a bogus ret value. --Stefan] Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-07raw-posix: Fix raw_getlength() to always return -errno on errorMarkus Armbruster1-6/+22
We got a merry mix of -1 and -errno here. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-01qemu-img create: add 'nocow' optionChunyan Liu1-0/+25
Add 'nocow' option so that users could have a chance to set NOCOW flag to newly created files. It's useful on btrfs file system to enhance performance. Btrfs has low performance when hosting VM images, even more when the guest in those VM are also using btrfs as file system. One way to mitigate this bad performance is to turn off COW attributes on VM files. Generally, there are two ways to turn off NOCOW on btrfs: a) by mounting fs with nodatacow, then all newly created files will be NOCOW. b) per file. Add the NOCOW file attribute. It could only be done to empty or new files. This patch tries the second way, according to the option, it could add NOCOW per file. For most block drivers, since the create file step is in raw-posix.c, so we can do setting NOCOW flag ioctl in raw-posix.c only. But there are some exceptions, like block/vpc.c and block/vdi.c, they are creating file by calling qemu_open directly. For them, do the same setting NOCOW flag ioctl work in them separately. [Fixed up 082.out due to the new 'nocow' creation option --Stefan] Signed-off-by: Chunyan Liu <cyliu@suse.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16cleanup QEMUOptionParameterChunyan Liu1-5/+5
Now that all backend drivers are using QemuOpts, remove all QEMUOptionParameter related codes. Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Chunyan Liu <cyliu@suse.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16raw-posix.c: replace QEMUOptionParameter with QemuOptsChunyan Liu1-32/+27
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Chunyan Liu <cyliu@suse.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-04raw-posix: drop raw_get_aio_fd() since it is no longer usedStefan Hajnoczi1-34/+0
virtio-blk data-plane now uses the QEMU block layer for I/O. We do not need raw_get_aio_fd() anymore. It was a layering violation anyway, so let's get rid of it. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-04block/linux-aio: fix memory and fd leakStefan Hajnoczi1-0/+5
Hot unplugging -drive aio=native,file=test.img,format=raw images leaves the Linux AIO event notifier and struct qemu_laio_state allocated. Luckily nothing will use the event notifier after the BlockDriverState has been closed so the handler function is never called. It's still worth fixing this resource leak. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-04block/raw-posix: implement .bdrv_detach/attach_aio_context()Stefan Hajnoczi1-0/+43
Drop the assumption that we're using the main AioContext for Linux AIO. Convert the Linux AIO event notifier to use aio_set_event_notifier(). The .bdrv_detach/attach_aio_context() interfaces also need to be implemented to move the event notifier handler from the old to the new AioContext. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-05-30block/raw-posix.c: Avoid nonstandard LONG_LONG_MAXPeter Maydell1-1/+1
In the MacOSX specific code in raw-posix.c we use the define LONG_LONG_MAX. This is actually a non-standard pre-C99 define; switch to using the standard LLONG_MAX instead. This apparently fixes a compilation failure with certain compiler/OS versions (though it is unclear which). Reported-by: Peter Bartoli <peter@bartoli.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-05-09block/raw-posix: Try both FIEMAP and SEEK_HOLEMax Reitz1-50/+77
The current version of raw-posix always uses ioctl(FS_IOC_FIEMAP) if FIEMAP is available; lseek with SEEK_HOLE/SEEK_DATA are not even compiled in in this case. However, there may be implementations which support the latter but not the former (e.g., NFSv4.2) as well as vice versa. To cover both cases, try FIEMAP first (as this will return -ENOTSUP if not supported instead of returning a failsafe value (everything allocated as a single extent)) and if that does not work, fall back to SEEK_HOLE/SEEK_DATA. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-30block: Unlink temporary files in raw-posix/win32Kevin Wolf1-1/+4
Instead of having unlink() calls in the generic block layer, where we aren't even guarateed to have a file name, move them to those block drivers that are actually used and that always have a filename. Gets us rid of some #ifdefs as well. The patch also converts bs->is_temporary to a new BDRV_O_TEMPORARY open flag so that it is inherited in the protocol layer and the raw-posix and raw-win32 drivers can unlink the file. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-03-13block/raw-posix: Strip protocol prefix on creationMax Reitz1-0/+12
The hdev_create() implementation in block/raw-posix.c is used by the "host_device", "host_cdrom" and "host_floppy" protocol block drivers together. Thus, any of the associated prefixes may occur and exactly one should should be stripped, if it does (thus, "host_device:host_cdrom:/dev/cdrom" is not shortened to "/dev/cdrom"). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-03-13block/raw-posix: bdrv_parse_filename() for cdromMax Reitz1-0/+15
The "host_cdrom" protocol drivers should strip the "host_cdrom:" prefix from filenames if present. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-03-13block/raw-posix: bdrv_parse_filename() for floppyMax Reitz1-0/+10
The "host_floppy" protocol driver should strip the "host_floppy:" prefix from filenames if present. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-03-13block/raw-posix: bdrv_parse_filename() for hdevMax Reitz1-0/+10
The "host_device" protocol driver should strip the "host_device:" prefix from filenames if present. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-03-06block/raw-posix: Strip "file:" prefix on creationMax Reitz1-0/+2
The bdrv_create() implementation of the block/raw-posix "file" protocol driver should strip the "file:" prefix from filenames if present. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-03-06block/raw-posix: Implement bdrv_parse_filename()Max Reitz1-0/+12
The "file" protocol driver should strip the "file:" prefix from filenames if present. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-17Use error_is_set() only when necessaryMarkus Armbruster1-6/+6
error_is_set(&var) is the same as var != NULL, but it takes whole-program analysis to figure that out. Unnecessarily hard for optimizers, static checkers, and human readers. Dumb it down to obvious. Gets rid of several dozen Coverity false positives. Note that the obvious form is already used in many places. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-01-24raw: Probe required direct I/O alignmentPaolo Bonzini1-17/+85
Add a bs->request_alignment field that contains the required offset/length alignment for I/O requests and fill it in the raw block drivers. Use ioctls if possible, else see what alignment it takes for O_DIRECT to succeed. While at it, also expose the memory alignment requirements, which may be (and in practice are) different from the disk alignment requirements. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-01-06qemu-option: Remove qemu_opts_create_nofailPeter Crosthwaite1-1/+1
This is a boiler-plate _nofail variant of qemu_opts_create. Remove and use error_abort in call sites. null/0 arguments needs to be added for the id and fail_if_exists fields in affected callsites due to argument inconsistency between the normal and no_fail variants. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-12-03raw-posix: add support for write_zeroes on XFS and block devicesPaolo Bonzini1-12/+72
The code is similar to the implementation of discard and write_zeroes with UNMAP. However, failure must be propagated up to block.c. The stale page cache problem can be reproduced as follows: # modprobe scsi-debug lbpws=1 lbprz=1 # ./qemu-io /dev/sdXX qemu-io> write -P 0xcc 0 2M qemu-io> write -z 0 1M qemu-io> read -P 0x00 0 512 Pattern verification failed at offset 0, 512 bytes qemu-io> read -v 0 512 00000000: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ ... # ./qemu-io --cache=none /dev/sdXX qemu-io> write -P 0xcc 0 2M qemu-io> write -z 0 1M qemu-io> read -P 0x00 0 512 qemu-io> read -v 0 512 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ ... And similarly with discard instead of "write -z". Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-03raw-posix: implement write_zeroes with MAY_UNMAP for block devicesPaolo Bonzini1-0/+37
See the next commit for the description of the Linux kernel problem that is worked around in raw_open_common. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-03raw-posix: implement write_zeroes with MAY_UNMAP for filesPaolo Bonzini1-2/+64
Writing zeroes to a file can be done by punching a hole if MAY_UNMAP is set. Note that in this case ENOTSUP is not ignored, but makes the block layer fall back to the generic implementation. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-03block: handle ENOTSUP from discard in generic codePaolo Bonzini1-6/+6
Similar to write_zeroes, let the generic code receive a ENOTSUP for discard operations. Since bdrv_discard has advisory semantics, we can just swallow the error. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Peter Lieven <pl@kamp.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-11-14block: Print its file name if backing file opening failedFam Zheng1-1/+0
If backing file doesn't exist, the error message is confusing and misleading: $ qemu /tmp/a.qcow2 qemu: could not open disk image /tmp/a.qcow2: Could not open file: No such file or directory But... $ ls /tmp/a.qcow2 /tmp/a.qcow2 $ qemu-img info /tmp/a.qcow2 image: /tmp/a.qcow2 file format: qcow2 virtual size: 8.0G (8589934592 bytes) disk size: 196K cluster_size: 65536 backing file: /tmp/b.qcow2 Because... $ ls /tmp/b.qcow2 ls: cannot access /tmp/b.qcow2: No such file or directory This is not intuitive. It's better to have the missing file's name in the error message. With this patch: $ qemu-io -c 'read 0 512' /tmp/a.qcow2 qemu-io: can't open device /tmp/a.qcow2: Could not open backing file: Could not open '/stor/vm/arch.raw': No such file or directory no file open, try 'help open' Which is a little bit better. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-11-07block/raw-posix: fix FreeBSD compilationAndreas Tobler1-1/+2
The below patch is needed to compile qemu trunk on FreeBSD with gcc48, clang will fail.... ;). Host x84_64-freebsd. Signed-off-by: Andreas Tobler <andreast@FreeBSD.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-10-29block: Avoid unecessary drv->bdrv_getlength() callsKevin Wolf1-3/+6
The block layer generally keeps the size of an image cached in bs->total_sectors so that it doesn't have to perform expensive operations to get the size whenever it needs it. This doesn't work however when using a backend that can change its size without qemu being aware of it, i.e. passthrough of removable media like CD-ROMs or floppy disks. For this reason, the caching is disabled when a removable device is used. It is obvious that checking whether the _guest_ device has removable media isn't the right thing to do when we want to know whether the size of the host backend can change. To make things worse, non-top-level BlockDriverStates never have any device attached, which makes qemu assume they are removable, so drv->bdrv_getlength() is always called on the protocol layer. In the case of raw-posix, this causes unnecessary lseek() system calls, which turned out to be rather expensive. This patch completely changes the logic and disables bs->total_sectors caching only for certain block driver types, for which a size change is expected: host_cdrom and host_floppy on POSIX, host_device on win32; also the raw format in case it sits on top of one of these protocols, but in the common case the nested bdrv_getlength() call on the protocol driver will use the cache again and avoid an expensive drv->bdrv_getlength() call. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2013-10-11block/raw-posix: Employ error parameterMax Reitz1-15/+57
Make use of the error parameter in the opening and creating functions in block/raw-posix.c. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-25block: introduce BlockDriver.bdrv_needs_filename to enable some drivers.Benoît Canet1-0/+5
Some drivers will have driver specifics options but no filename. This new bool allow the block layer to treat them correctly. The .bdrv_needs_filename is set in drivers not having .bdrv_parse_filename and not having .bdrv_open. The first exception to this rule will be the quorum driver. Signed-off-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-12bdrv: Use "Error" for creating imagesMax Reitz1-2/+4
Add an Error ** parameter to BlockDriver.bdrv_create to allow more specific error messages. Signed-off-by: Max Reitz <mreitz@redhat.com>
2013-09-12bdrv: Use "Error" for opening imagesMax Reitz1-4/+8
Add an Error ** parameter to BlockDriver.bdrv_open and BlockDriver.bdrv_file_open to allow more specific error messages. Signed-off-by: Max Reitz <mreitz@redhat.com>
2013-09-06raw-posix: report unwritten extents as zeroPaolo Bonzini1-0/+3
These are created for example with XFS_IOC_ZERO_RANGE. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06raw-posix: return get_block_status data and flagsPaolo Bonzini1-7/+10
Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06block: introduce bdrv_get_block_status APIPaolo Bonzini1-2/+2
For now, bdrv_get_block_status is just another name for bdrv_is_allocated. The next patches will add more flags. This also touches all block drivers with a mostly mechanical rename. The sole exception is cow; because it calls cow_co_is_allocated from the read code, we keep that function and make cow_co_get_block_status a wrapper. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-28block: change default of .has_zero_init to 0Peter Lieven1-9/+1
.has_zero_init defaults to 1 for all formats and protocols. this is a dangerous default since this means that all new added drivers need to manually overwrite it to 0 if they do not ensure that a device is zero initialized after bdrv_create(). if a driver needs to explicitly set this value to 1 its easier to verify the correctness in the review process. during review of the existing drivers it turned out that ssh and gluster had a wrong default of 1. both protocols support host_devices as backend which are not by default zero initialized. this wrong assumption will lead to possible corruption if qemu-img convert is used to write to such a backend. vpc and vmdk also defaulted to 1 altough they support fixed respectively flat extends. this has to be addresses in separate patches. both formats as well as the mentioned ssh and gluster are turned to the default of 0 with this patch for safety. a similar problem with the wrong default existed for iscsi most likely because the driver developer did oversee the default value of 1. Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-28raw-posix: Fix /dev/cdrom magic on OS XKevin Wolf1-0/+1
The raw-posix driver has code to provide a /dev/cdrom on OS X even though it doesn't really exist. However, since commit c66a6157 the real filename is dismissed after finding it, so opening /dev/cdrom fails. Put the filename back into the options QDict to make this work again. Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-22block: Remove filename parameter from .bdrv_file_open()Kevin Wolf1-10/+5
It is unused now in all block drivers. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-04-22raw-posix: Use bdrv_open options instead of filenameKevin Wolf1-12/+45
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-03-22block: Add options QDict to bdrv_file_open() prototypesKevin Wolf1-5/+10
The new parameter is unused yet. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-03-15threadpool: drop global thread poolStefan Hajnoczi1-2/+6
Now that each AioContext has a ThreadPool and the main loop AioContext can be fetched with bdrv_get_aio_context(), we can eliminate the concept of a global thread pool from thread-pool.c. The submit functions must take a ThreadPool* argument. block/raw-posix.c and block/raw-win32.c use aio_get_thread_pool(bdrv_get_aio_context(bs)) to fetch the main loop's ThreadPool. tests/test-thread-pool.c must be updated to reflect the new thread_pool_submit() function prototypes. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2025-02-05 11:27:56 +0000