aboutsummaryrefslogtreecommitdiff
path: root/block/qcow.c
AgeCommit message (Collapse)AuthorFilesLines
2017-08-30misc: Remove unused Error variablesAlberto Garcia1-9/+3
There's a few cases which we're passing an Error pointer to a function only to discard it immediately afterwards without checking it. In these cases we can simply remove the variable and pass NULL instead. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20170829120836.16091-1-berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-07-25qcow: fix memory leaks related to encryptionDaniel P. Berrange1-2/+3
Fix leak of the 'encryptopts' string, which was mistakenly declared const. Fix leak of QemuOpts entry which should not have been deleted from the opts array. Reported by: coverity Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170714103105.5781-1-berrange@redhat.com Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11block: Add PreallocMode to blk_truncate()Max Reitz1-1/+1
blk_truncate() itself will pass that value to bdrv_truncate(), and all callers of blk_truncate() just set the parameter to PREALLOC_MODE_OFF for now. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20170613202107.10125-4-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11block: Add PreallocMode to bdrv_truncate()Max Reitz1-2/+4
For block drivers that just pass a truncate request to the underlying protocol, we can now pass the preallocation mode instead of aborting if it is not PREALLOC_MODE_OFF. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20170613202107.10125-3-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11block: pass option prefix down to crypto layerDaniel P. Berrange1-3/+4
While the crypto layer uses a fixed option name "key-secret", the upper block layer may have a prefix on the options. e.g. "encrypt.key-secret", in order to avoid clashes between crypto option names & other block option names. To ensure the crypto layer can report accurate error messages, we must tell it what option name prefix was used. Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-19-berrange@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11block: remove all encryption handling APIsDaniel P. Berrange1-1/+7
Now that all encryption keys must be provided upfront via the QCryptoSecret API and associated block driver properties there is no need for any explicit encryption handling APIs in the block layer. Encryption can be handled transparently within the block driver. We only retain an API for querying whether an image is encrypted or not, since that is a potentially useful piece of metadata to report to the user. Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-18-berrange@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11qcow: convert QCow to use QCryptoBlock for encryptionDaniel P. Berrange1-102/+96
This converts the qcow driver to make use of the QCryptoBlock APIs for encrypting image content. This is only wired up to permit use of the legacy QCow encryption format. Users who wish to have the strong LUKS format should switch to qcow2 instead. With this change it is now required to use the QCryptoSecret object for providing passwords, instead of the current block password APIs / interactive prompting. $QEMU \ -object secret,id=sec0,file=/home/berrange/encrypted.pw \ -drive file=/home/berrange/encrypted.qcow,encrypt.format=aes,\ encrypt.key-secret=sec0 Though note that running QEMU system emulators with the AES encryption is no longer supported, so while the above syntax is valid, QEMU will refuse to actually run the VM in this particular example. Likewise when creating images with the legacy AES-CBC format qemu-img create -f qcow \ --object secret,id=sec0,file=/home/berrange/encrypted.pw \ -o encrypt.format=aes,encrypt.key-secret=sec0 \ /home/berrange/encrypted.qcow 64M Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-10-berrange@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11qcow: make encrypt_sectors encrypt in placeDaniel P. Berrange1-30/+15
Instead of requiring separate input/output buffers for encrypting data, change encrypt_sectors() to assume use of a single buffer, encrypting in place. One current caller uses the same buffer for input/output already and the other two callers are easily converted to do so. Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-9-berrange@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11block: deprecate "encryption=on" in favor of "encrypt.format=aes"Daniel P. Berrange1-6/+25
Historically the qcow & qcow2 image formats supported a property "encryption=on" to enable their built-in AES encryption. We'll soon be supporting LUKS for qcow2, so need a more general purpose way to enable encryption, with a choice of formats. This introduces an "encrypt.format" option, which will later be joined by a number of other "encrypt.XXX" options. The use of a "encrypt." prefix instead of "encrypt-" is done to facilitate mapping to a nested QAPI schema at later date. e.g. the preferred syntax is now qemu-img create -f qcow2 -o encrypt.format=aes demo.qcow2 Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-8-berrange@redhat.com Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11qcow: require image size to be > 1 for new imagesDaniel P. Berrange1-0/+6
The qcow driver refuses to open images which are less than 2 bytes in size, but will happily create such images. Add a check in the create path to avoid this discrepancy. Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-5-berrange@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-06-09block/qcow.c: Fix memory leak in qcow_create()Peter Maydell1-0/+1
Coverity points out that the code path in qcow_create() for the magic "fat:" backing file name leaks the memory used to store the filename (CID 1307771). Free the memory before we overwrite the pointer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-05-17migration: Create migration/blocker.hJuan Quintela1-1/+1
This allows us to remove lots of includes of migration/migration.h Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-04-28block: Add errp to b{lk,drv}_truncate()Max Reitz1-3/+3
For one thing, this allows us to drop the error message generation from qemu-img.c and blockdev.c and instead have it unified in bdrv_truncate(). Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20170328205129.15138-3-mreitz@redhat.com Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-02-28block: Add BDRV_O_RESIZE for blk_new_open()Kevin Wolf1-1/+2
blk_new_open() is a convenience function that processes flags rather than QDict options as a simple way to just open an image file. In order to keep it convenient in the future, it must automatically request the necessary permissions. This can easily be inferred from the flags for read and write, but we need another flag that tells us whether to get the resize permission. We can't just always request it because that means that no block jobs can run on the resulting BlockBackend (which is something that e.g. qemu-img commit wants to do), but we also can't request it never because most of the .bdrv_create() implementations call blk_truncate(). The solution is to introduce another flag that is passed by all users that want to resize the image. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2017-02-28block: Request child permissions in format driversKevin Wolf1-0/+1
This makes use of the .bdrv_child_perm() implementation for formats that we just added. All format drivers expose the permissions they actually need nows, so that they can be set accordingly and updated when parents are attached or detached. The only format not included here is raw, which was already converted with the other filter drivers. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Fam Zheng <famz@redhat.com>
2017-02-24block: Attach bs->file only during .bdrv_open()Kevin Wolf1-0/+6
The way that attaching bs->file worked was a bit unusual in that it was the only child that would be attached to a node which is not opened yet. Because of this, the block layer couldn't know yet which permissions the driver would eventually need. This patch moves the point where bs->file is attached to the beginning of the individual .bdrv_open() implementations, so drivers already know what they are going to do with the child. This is also more consistent with how driver-specific children work. For a moment, bdrv_open() gets its own BdrvChild to perform image probing, but instead of directly assigning this BdrvChild to the BDS, it becomes a temporary one and the node name is passed as an option to the drivers, so that they can simply use bdrv_open_child() to create another reference for their own use. This duplicated child for (the not opened yet) bs is not the final state, a follow-up patch will change the image probing code to use a BlockBackend, which is completely independent of bs. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2017-02-24block: Pass BdrvChild to bdrv_truncate()Kevin Wolf1-2/+2
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2017-01-24migration: disallow migrate_add_blocker during migrationAshijeet Acharya1-1/+7
If a migration is already in progress and somebody attempts to add a migration blocker, this should rightly fail. Add an errp parameter and a retcode return value to migrate_add_blocker. Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com> Message-Id: <1484566314-3987-5-git-send-email-ashijeetacharya@gmail.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Acked-by: Greg Kurz <groug@kaod.org> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Merged with recent 'Allow invtsc migration' change
2016-10-19crypto: extend mode as a parameter in qcrypto_cipher_supports()Gonglei1-1/+2
It can't guarantee all cipher modes are supported if one cipher algorithm is supported by a backend. Let's extend qcrypto_cipher_supports() to take both the algorithm and mode as parameters. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-09-05qcow: cleanup qcow_co_pwritev_compressed to avoid the recursionPavel Butsykin1-17/+7
Now that the function uses a vector instead of a buffer, there is no need to use recursive code. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Jeff Cody <jcody@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: John Snow <jsnow@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-05qcow: add qcow_co_pwritev_compressedPavel Butsykin1-67/+42
Added implementation of the qcow_co_pwritev_compressed function that will allow us to safely use compressed writes for the qcow from running VMs. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Jeff Cody <jcody@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: John Snow <jsnow@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-26qcow2: do not allocate extra memoryVladimir Sementsov-Ogievskiy1-1/+1
There are no needs to allocate more than one cluster, as we set avail_out for deflate to one cluster. Zlib docs (http://www.zlib.net/manual.html) says: "deflate compresses as much data as possible, and stops when the input buffer becomes empty or the output buffer becomes full." So, deflate will not write more than avail_out to output buffer. If there is not enough space in output buffer for compressed data (it may be larger than input data) deflate just returns Z_OK. (if all data is compressed and written to output buffer deflate returns Z_STREAM_END). Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 1468515565-81313-1-git-send-email-vsementsov@virtuozzo.com Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-07-13coroutine: move entry argument to qemu_coroutine_createPaolo Bonzini1-2/+2
In practice the entry argument is always known at creation time, and it is confusing that sometimes qemu_coroutine_enter is used with a non-NULL argument to re-enter a coroutine (this happens in block/sheepdog.c and tests/test-coroutine.c). So pass the opaque value at creation time, for consistency with e.g. aio_bh_new. Mostly done with the following semantic patch: @ entry1 @ expression entry, arg, co; @@ - co = qemu_coroutine_create(entry); + co = qemu_coroutine_create(entry, arg); ... - qemu_coroutine_enter(co, arg); + qemu_coroutine_enter(co); @ entry2 @ expression entry, arg; identifier co; @@ - Coroutine *co = qemu_coroutine_create(entry); + Coroutine *co = qemu_coroutine_create(entry, arg); ... - qemu_coroutine_enter(co, arg); + qemu_coroutine_enter(co); @ entry3 @ expression entry, arg; @@ - qemu_coroutine_enter(qemu_coroutine_create(entry), arg); + qemu_coroutine_enter(qemu_coroutine_create(entry, arg)); @ reentry @ expression co; @@ - qemu_coroutine_enter(co, NULL); + qemu_coroutine_enter(co); except for the aforementioned few places where the semantic patch stumbled (as expected) and for test_co_queue, which would otherwise produce an uninitialized variable warning. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-05block: Convert bdrv_pwrite(v/_sync) to BdrvChildKevin Wolf1-7/+7
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-05block: Convert bdrv_pread(v) to BdrvChildKevin Wolf1-5/+5
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-05block: Convert bdrv_write() to BdrvChildKevin Wolf1-1/+44
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-05block: Convert bdrv_co_writev() to BdrvChildKevin Wolf1-1/+1
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-05block: Convert bdrv_co_readv() to BdrvChildKevin Wolf1-3/+2
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-05block: Use bool as appropriate for BDS membersEric Blake1-1/+1
Using int for values that are only used as booleans is confusing. While at it, rearrange a couple of members so that all the bools are contiguous. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-06-16block: drop support for using qcow[2] encryption with system emulatorsDaniel P. Berrange1-4/+10
Back in the 2.3.0 release we declared qcow[2] encryption as deprecated, warning people that it would be removed in a future release. commit a1f688f4152e65260b94f37543521ceff8bfebe4 Author: Markus Armbruster <armbru@redhat.com> Date: Fri Mar 13 21:09:40 2015 +0100 block: Deprecate QCOW/QCOW2 encryption The code still exists today, but by a (happy?) accident we entirely broke the ability to use qcow[2] encryption in the system emulators in the 2.4.0 release due to commit 8336aafae1451d54c81dd2b187b45f7c45d2428e Author: Daniel P. Berrange <berrange@redhat.com> Date: Tue May 12 17:09:18 2015 +0100 qcow2/qcow: protect against uninitialized encryption key This commit was designed to prevent future coding bugs which might cause QEMU to read/write data on an encrypted block device in plain text mode before a decryption key is set. It turns out this preventative measure was a little too good, because we already had a long standing bug where QEMU read encrypted data in plain text mode during system emulator startup, in order to guess disk geometry: Thread 10 (Thread 0x7fffd3fff700 (LWP 30373)): #0 0x00007fffe90b1a28 in raise () at /lib64/libc.so.6 #1 0x00007fffe90b362a in abort () at /lib64/libc.so.6 #2 0x00007fffe90aa227 in __assert_fail_base () at /lib64/libc.so.6 #3 0x00007fffe90aa2d2 in () at /lib64/libc.so.6 #4 0x000055555587ae19 in qcow2_co_readv (bs=0x5555562accb0, sector_num=0, remaining_sectors=1, qiov=0x7fffffffd260) at block/qcow2.c:1229 #5 0x000055555589b60d in bdrv_aligned_preadv (bs=bs@entry=0x5555562accb0, req=req@entry=0x7fffd3ffea50, offset=offset@entry=0, bytes=bytes@entry=512, align=align@entry=512, qiov=qiov@entry=0x7fffffffd260, flags=0) at block/io.c:908 #6 0x000055555589b8bc in bdrv_co_do_preadv (bs=0x5555562accb0, offset=0, bytes=512, qiov=0x7fffffffd260, flags=<optimized out>) at block/io.c:999 #7 0x000055555589c375 in bdrv_rw_co_entry (opaque=0x7fffffffd210) at block/io.c:544 #8 0x000055555586933b in coroutine_thread (opaque=0x555557876310) at coroutine-gthread.c:134 #9 0x00007ffff64e1835 in g_thread_proxy (data=0x5555562b5590) at gthread.c:778 #10 0x00007ffff6bb760a in start_thread () at /lib64/libpthread.so.0 #11 0x00007fffe917f59d in clone () at /lib64/libc.so.6 Thread 1 (Thread 0x7ffff7ecab40 (LWP 30343)): #0 0x00007fffe91797a9 in syscall () at /lib64/libc.so.6 #1 0x00007ffff64ff87f in g_cond_wait (cond=cond@entry=0x555555e085f0 <coroutine_cond>, mutex=mutex@entry=0x555555e08600 <coroutine_lock>) at gthread-posix.c:1397 #2 0x00005555558692c3 in qemu_coroutine_switch (co=<optimized out>) at coroutine-gthread.c:117 #3 0x00005555558692c3 in qemu_coroutine_switch (from_=0x5555562b5e30, to_=to_@entry=0x555557876310, action=action@entry=COROUTINE_ENTER) at coroutine-gthread.c:175 #4 0x0000555555868a90 in qemu_coroutine_enter (co=0x555557876310, opaque=0x0) at qemu-coroutine.c:116 #5 0x0000555555859b84 in thread_pool_completion_bh (opaque=0x7fffd40010e0) at thread-pool.c:187 #6 0x0000555555859514 in aio_bh_poll (ctx=ctx@entry=0x5555562953b0) at async.c:85 #7 0x0000555555864d10 in aio_dispatch (ctx=ctx@entry=0x5555562953b0) at aio-posix.c:135 #8 0x0000555555864f75 in aio_poll (ctx=ctx@entry=0x5555562953b0, blocking=blocking@entry=true) at aio-posix.c:291 #9 0x000055555589c40d in bdrv_prwv_co (bs=bs@entry=0x5555562accb0, offset=offset@entry=0, qiov=qiov@entry=0x7fffffffd260, is_write=is_write@entry=false, flags=flags@entry=(unknown: 0)) at block/io.c:591 #10 0x000055555589c503 in bdrv_rw_co (bs=bs@entry=0x5555562accb0, sector_num=sector_num@entry=0, buf=buf@entry=0x7fffffffd2e0 "\321,", nb_sectors=nb_sectors@entry=21845, is_write=is_write@entry=false, flags=flags@entry=(unknown: 0)) at block/io.c:614 #11 0x000055555589c562 in bdrv_read_unthrottled (nb_sectors=21845, buf=0x7fffffffd2e0 "\321,", sector_num=0, bs=0x5555562accb0) at block/io.c:622 #12 0x000055555589c562 in bdrv_read_unthrottled (bs=0x5555562accb0, sector_num=sector_num@entry=0, buf=buf@entry=0x7fffffffd2e0 "\321,", nb_sectors=nb_sectors@entry=21845) at block/io.c:634 nb_sectors@entry=1) at block/block-backend.c:504 #14 0x0000555555752e9f in guess_disk_lchs (blk=blk@entry=0x5555562a5290, pcylinders=pcylinders@entry=0x7fffffffd52c, pheads=pheads@entry=0x7fffffffd530, psectors=psectors@entry=0x7fffffffd534) at hw/block/hd-geometry.c:68 #15 0x0000555555752ff7 in hd_geometry_guess (blk=0x5555562a5290, pcyls=pcyls@entry=0x555557875d1c, pheads=pheads@entry=0x555557875d20, psecs=psecs@entry=0x555557875d24, ptrans=ptrans@entry=0x555557875d28) at hw/block/hd-geometry.c:133 #16 0x0000555555752b87 in blkconf_geometry (conf=conf@entry=0x555557875d00, ptrans=ptrans@entry=0x555557875d28, cyls_max=cyls_max@entry=65536, heads_max=heads_max@entry=16, secs_max=secs_max@entry=255, errp=errp@entry=0x7fffffffd5e0) at hw/block/block.c:71 #17 0x0000555555799bc4 in ide_dev_initfn (dev=0x555557875c80, kind=IDE_HD) at hw/ide/qdev.c:174 #18 0x0000555555768394 in device_realize (dev=0x555557875c80, errp=0x7fffffffd640) at hw/core/qdev.c:247 #19 0x0000555555769a81 in device_set_realized (obj=0x555557875c80, value=<optimized out>, errp=0x7fffffffd730) at hw/core/qdev.c:1058 #20 0x00005555558240ce in property_set_bool (obj=0x555557875c80, v=<optimized out>, opaque=0x555557875de0, name=<optimized out>, errp=0x7fffffffd730) at qom/object.c:1514 #21 0x0000555555826c87 in object_property_set_qobject (obj=obj@entry=0x555557875c80, value=value@entry=0x55555784bcb0, name=name@entry=0x55555591cb3d "realized", errp=errp@entry=0x7fffffffd730) at qom/qom-qobject.c:24 #22 0x0000555555825760 in object_property_set_bool (obj=obj@entry=0x555557875c80, value=value@entry=true, name=name@entry=0x55555591cb3d "realized", errp=errp@entry=0x7fffffffd730) at qom/object.c:905 #23 0x000055555576897b in qdev_init_nofail (dev=dev@entry=0x555557875c80) at hw/core/qdev.c:380 #24 0x0000555555799ead in ide_create_drive (bus=bus@entry=0x555557629630, unit=unit@entry=0, drive=0x5555562b77e0) at hw/ide/qdev.c:122 #25 0x000055555579a746 in pci_ide_create_devs (dev=dev@entry=0x555557628db0, hd_table=hd_table@entry=0x7fffffffd830) at hw/ide/pci.c:440 #26 0x000055555579b165 in pci_piix3_ide_init (bus=<optimized out>, hd_table=0x7fffffffd830, devfn=<optimized out>) at hw/ide/piix.c:218 #27 0x000055555568ca55 in pc_init1 (machine=0x5555562960a0, pci_enabled=1, kvmclock_enabled=<optimized out>) at /home/berrange/src/virt/qemu/hw/i386/pc_piix.c:256 #28 0x0000555555603ab2 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at vl.c:4249 So the safety net is correctly preventing QEMU reading cipher text as if it were plain text, during startup and aborting QEMU to avoid bad usage of this data. For added fun this bug only happens if the encrypted qcow2 file happens to have data written to the first cluster, otherwise the cluster won't be allocated and so qcow2 would not try the decryption routines at all, just return all 0's. That no one even noticed, let alone reported, this bug that has shipped in 2.4.0, 2.5.0 and 2.6.0 shows that the number of actual users of encrypted qcow2 is approximately zero. So rather than fix the crash, and backport it to stable releases, just go ahead with what we have warned users about and disable any use of qcow2 encryption in the system emulators. qemu-img/qemu-io/qemu-nbd are still able to access qcow2 encrypted images for the sake of data conversion. In the future, qcow2 will gain support for the alternative luks format, but when this happens it'll be using the '-object secret' infrastructure for getting keys, which avoids this problematic scenario entirely. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-06-07qcow/qcow2: Use DIV_ROUND_UPLaurent Vivier1-2/+2
Replace (((n) + (d) - 1) /(d)) by DIV_ROUND_UP(n,d). This patch is the result of coccinelle script scripts/coccinelle/round.cocci CC: qemu-block@nongnu.org Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-05-19qemu-common: stop including qemu/bswap.h from qemu-common.hPaolo Bonzini1-0/+1
Move it to the actual users. There are still a few includes of qemu/bswap.h in headers; removing them is left for future work. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-12block: Allow BDRV_REQ_FUA through blk_pwrite()Eric Blake1-4/+4
We have several block drivers that understand BDRV_REQ_FUA, and emulate it in the block layer for the rest by a full flush. But without a way to actually request BDRV_REQ_FUA during a pass-through blk_pwrite(), FUA-aware block drivers like NBD are forced to repeat the emulation logic of a full flush regardless of whether the backend they are writing to could do it more efficiently. This patch just wires up a flags argument; followup patches will actually make use of it in the NBD driver and in qemu-io. Signed-off-by: Eric Blake <eblake@redhat.com> Acked-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-30block: Always set writeback mode in blk_new_open()Kevin Wolf1-2/+1
All callers of blk_new_open() either don't rely on the WCE bit set after blk_new_open() because they explicitly set it anyway, or they pass BDRV_O_CACHE_WB unconditionally. This patch changes blk_new_open() so that it always enables writeback mode and asserts that BDRV_O_CACHE_WB is clear. For those callers that used to pass BDRV_O_CACHE_WB unconditionally, the flag is removed now. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-30block: move encryption deprecation warning into qcow codeDaniel P. Berrange1-0/+9
For a couple of releases we have been warning Encrypted images are deprecated Support for them will be removed in a future release. You can use 'qemu-img convert' to convert your image to an unencrypted one. This warning was issued by system emulators, qemu-img, qemu-nbd and qemu-io. Such a broad warning was issued because the original intention was to rip out all the code for dealing with encryption inside the QEMU block layer APIs. The new block encryption framework used for the LUKS driver does not rely on the unloved block layer API for encryption keys, instead using the QOM 'secret' object type. It is thus no longer appropriate to warn about encryption unconditionally. When the qcow/qcow2 drivers are converted to use the new encryption framework too, it will be practical to keep AES-CBC support present for use in qemu-img, qemu-io & qemu-nbd to allow for interoperability with older QEMU versions and liberation of data from existing encrypted qcow2 files. This change moves the warning out of the generic block code and into the qcow/qcow2 drivers. Further, the warning is set to only appear when running the system emulators, since qemu-img, qemu-io, qemu-nbd are expected to support qcow2 encryption long term now that the maint burden has been eliminated. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster1-0/+1
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-17blockdev: Split monitor reference from BB creationMax Reitz1-1/+1
Before this patch, blk_new() automatically assigned a name to the new BlockBackend and considered it referenced by the monitor. This patch removes the implicit monitor_add_blk() call from blk_new() (and consequently the monitor_remove_blk() call from blk_delete(), too) and thus blk_new() (and related functions) no longer take a BB name argument. In fact, there is only a single point where blk_new()/blk_new_open() is called and the new BB is monitor-owned, and that is in blockdev_init(). Besides thus relieving us from having to invent names for all of the BBs we use in qemu-img, this fixes a bug where qemu cannot create a new image if there already is a monitor-owned BB named "image". If a BB and its BDS tree are created in a single operation, as of this patch the BDS tree will be created before the BB is given a name (whereas it was the other way around before). This results in minor change to the output of iotest 087, whose reference output is amended accordingly. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-17qapi: Drop QERR_UNKNOWN_BLOCK_FORMAT_FEATUREMax Reitz1-5/+1
Just specifying a custom string is simpler in basically all places that used it, and in addition, specifying the BB or node name is something we generally do not do in other error messages when opening a BDS, so we should not do it here. This changes the output for iotest 036 (to the better, in my opinion), so the reference output needs to be changed accordingly. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-14qcow: Use BB functions in .bdrv_create()Kevin Wolf1-11/+14
All users of the block layers are supposed to go through a BlockBackend. The .bdrv_create() implementation is one such user, so this patch converts it. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-14block: Use writeback in .bdrv_create() implementationsKevin Wolf1-1/+2
There's no reason to use a writethrough cache mode while creating an image. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-02qcow: Assign bs->file->bs to file in qcow_co_get_block_statusFam Zheng1-0/+1
Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1453780743-16806-3-git-send-email-famz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-02-02block: Add "file" output parameter to block status query functionsFam Zheng1-1/+1
The added parameter can be used to return the BDS pointer which the valid offset is referring to. Its value should be ignored unless BDRV_BLOCK_OFFSET_VALID in ret is set. Until block drivers fill in the right value, let's clear it explicitly right before calling .bdrv_get_block_status. The "bs->file" condition in bdrv_co_get_block_status is kept now to keep iotest case 102 passing, and will be fixed once all drivers return the right file pointer. Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1453780743-16806-2-git-send-email-famz@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-20block: Clean up includesPeter Maydell1-0/+1
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-10-16block: Convert bs->backing_hd to BdrvChildKevin Wolf1-2/+2
This is the final step in converting all of the BlockDriverState pointers that block drivers use to BdrvChild. After this patch, bs->children contains the full list of child nodes that are referenced by a given BDS, and these children are only referenced through BdrvChild, so that updating the pointer in there is enough for changing edges in the graph. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-10-16block: Convert bs->file to BdrvChildKevin Wolf1-20/+23
This patch removes the temporary duplication between bs->file and bs->file_child by converting everything to BdrvChild. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-09-14block: Drop drv parameter from bdrv_open()Max Reitz1-1/+1
Now that this parameter is effectively unused, we can drop it and just pass NULL on to bdrv_open_inherit(). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-07-08block: convert qcow/qcow2 to use generic cipher APIDaniel P. Berrange1-27/+75
Switch the qcow/qcow2 block driver over to use the generic cipher API, this allows it to use the pluggable AES implementations, instead of being hardcoded to use QEMU's built-in impl. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1435770638-25715-10-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-07crypto: move built-in AES implementation into crypto/Daniel P. Berrange1-1/+1
To prepare for a generic internal cipher API, move the built-in AES implementation into the crypto/ directory Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1435770638-25715-3-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-22Include qapi/qmp/qerror.h exactly where neededMarkus Armbruster1-0/+1
In particular, don't include it into headers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qerror: Clean up QERR_ macros to expand into a single stringMarkus Armbruster1-2/+2
These macros expand into error class enumeration constant, comma, string. Unclean. Has been that way since commit 13f59ae. The error class is always ERROR_CLASS_GENERIC_ERROR since the previous commit. Clean up as follows: * Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and delete it from the QERR_ macro. No change after preprocessing. * Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into error_setg(...). Again, no change after preprocessing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
generated by cgit v1.1 at 2024-12-28 05:41:48 +0000