aboutsummaryrefslogtreecommitdiff
path: root/block/curl.c
AgeCommit message (Collapse)AuthorFilesLines
2022-03-07block/curl.c: Check error return from curl_easy_setopt()Peter Maydell1-33/+57
Coverity points out that we aren't checking the return value from curl_easy_setopt() for any of the calls to it we make in block/curl.c. Some of these options are documented as always succeeding (e.g. CURLOPT_VERBOSE) but others have documented failure cases (e.g. CURLOPT_URL). For consistency we check every call, even the ones that theoretically cannot fail. Fixes: Coverity CID 1459336, 1459482, 1460331 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220222152341.850419-3-peter.maydell@linaro.org> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-07block/curl.c: Set error message string if curl_init_state() failsPeter Maydell1-0/+2
In curl_open(), the 'out' label assumes that the state->errmsg string has been set (either by curl_easy_perform() or by manually copying a string into it); however if curl_init_state() fails we will jump to that label without setting the string. Add the missing error string setup. (We can't be specific about the cause of failure: the documentation of curl_easy_init() just says "If this function returns NULL, something went wrong".) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220222152341.850419-2-peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-01-12aio-posix: split poll check from ready handlerStefan Hajnoczi1-5/+6
Adaptive polling measures the execution time of the polling check plus handlers called when a polled event becomes ready. Handlers can take a significant amount of time, making it look like polling was running for a long time when in fact the event handler was running for a long time. For example, on Linux the io_submit(2) syscall invoked when a virtio-blk device's virtqueue becomes ready can take 10s of microseconds. This can exceed the default polling interval (32 microseconds) and cause adaptive polling to stop polling. By excluding the handler's execution time from the polling check we make the adaptive polling calculation more accurate. As a result, the event loop now stays in polling mode where previously it would have fallen back to file descriptor monitoring. The following data was collected with virtio-blk num-queues=2 event_idx=off using an IOThread. Before: 168k IOPS, IOThread syscalls: 9837.115 ( 0.020 ms): IO iothread1/620155 io_submit(ctx_id: 140512552468480, nr: 16, iocbpp: 0x7fcb9f937db0) = 16 9837.158 ( 0.002 ms): IO iothread1/620155 write(fd: 103, buf: 0x556a2ef71b88, count: 8) = 8 9837.161 ( 0.001 ms): IO iothread1/620155 write(fd: 104, buf: 0x556a2ef71b88, count: 8) = 8 9837.163 ( 0.001 ms): IO iothread1/620155 ppoll(ufds: 0x7fcb90002800, nfds: 4, tsp: 0x7fcb9f1342d0, sigsetsize: 8) = 3 9837.164 ( 0.001 ms): IO iothread1/620155 read(fd: 107, buf: 0x7fcb9f939cc0, count: 512) = 8 9837.174 ( 0.001 ms): IO iothread1/620155 read(fd: 105, buf: 0x7fcb9f939cc0, count: 512) = 8 9837.176 ( 0.001 ms): IO iothread1/620155 read(fd: 106, buf: 0x7fcb9f939cc0, count: 512) = 8 9837.209 ( 0.035 ms): IO iothread1/620155 io_submit(ctx_id: 140512552468480, nr: 32, iocbpp: 0x7fca7d0cebe0) = 32 174k IOPS (+3.6%), IOThread syscalls: 9809.566 ( 0.036 ms): IO iothread1/623061 io_submit(ctx_id: 140539805028352, nr: 32, iocbpp: 0x7fd0cdd62be0) = 32 9809.625 ( 0.001 ms): IO iothread1/623061 write(fd: 103, buf: 0x5647cfba5f58, count: 8) = 8 9809.627 ( 0.002 ms): IO iothread1/623061 write(fd: 104, buf: 0x5647cfba5f58, count: 8) = 8 9809.663 ( 0.036 ms): IO iothread1/623061 io_submit(ctx_id: 140539805028352, nr: 32, iocbpp: 0x7fd0d0388b50) = 32 Notice that ppoll(2) and eventfd read(2) syscalls are eliminated because the IOThread stays in polling mode instead of falling back to file descriptor monitoring. As usual, polling is not implemented on Windows so this patch ignores the new io_poll_read() callback in aio-win32.c. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-id: 20211207132336.36627-2-stefanha@redhat.com [Fixed up aio_set_event_notifier() calls in tests/unit/test-fdmon-epoll.c added after this series was queued. --Stefan] Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-09-29block: use int64_t instead of uint64_t in driver read handlersVladimir Sementsov-Ogievskiy1-1/+2
We are generally moving to int64_t for both offset and bytes parameters on all io paths. Main motivation is realization of 64-bit write_zeroes operation for fast zeroing large disk chunks, up to the whole disk. We chose signed type, to be consistent with off_t (which is signed) and with possibility for signed return type (where negative value means error). So, convert driver read handlers parameters which are already 64bit to signed type. While being here, convert also flags parameter to be BdrvRequestFlags. Now let's consider all callers. Simple git grep '\->bdrv_\(aio\|co\)_preadv\(_part\)\?' shows that's there three callers of driver function: bdrv_driver_preadv() in block/io.c, passes int64_t, checked by bdrv_check_qiov_request() to be non-negative. qcow2_load_vmstate() does bdrv_check_qiov_request(). do_perform_cow_read() has uint64_t argument. And a lot of things in qcow2 driver are uint64_t, so converting it is big job. But we must not work with requests that don't satisfy bdrv_check_qiov_request(), so let's just assert it here. Still, the functions may be called directly, not only by drv->... Let's check: git grep '\.bdrv_\(aio\|co\)_preadv\(_part\)\?\s*=' | \ awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \ while read func; do git grep "$func(" | \ grep -v "$func(BlockDriverState"; done The only one such caller: QEMUIOVector qiov = QEMU_IOVEC_INIT_BUF(qiov, &data, 1); ... ret = bdrv_replace_test_co_preadv(bs, 0, 1, &qiov, 0); in tests/unit/test-bdrv-drain.c, and it's OK obviously. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210903102807.27127-4-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: fix typos] Signed-off-by: Eric Blake <eblake@redhat.com>
2021-03-19curl: Disconnect sockets from CURLStateMax Reitz1-18/+24
When a curl transfer is finished, that does not mean that CURL lets go of all the sockets it used for it. We therefore must not free a CURLSocket object before CURL has invoked curl_sock_cb() to tell us to remove it. Otherwise, we may get a use-after-free, as described in this bug report: https://bugs.launchpad.net/qemu/+bug/1916501 (Reproducer from that report: $ qemu-img convert -f qcow2 -O raw \ https://download.cirros-cloud.net/0.4.0/cirros-0.4.0-x86_64-disk.img \ out.img ) (Alternatively, it might seem logical to force-drop all sockets that have been used for a state when the respective transfer is done, kind of like it is done now, but including unsetting the AIO handlers. Unfortunately, doing so makes the driver just hang instead of crashing, which seems to evidence that CURL still uses those sockets.) Make the CURLSocket object independent of "its" CURLState by putting all sockets into a hash table belonging to the BDRVCURLState instead of a list that belongs to a CURLState. Do not touch any sockets in curl_clean_state(). Testing, it seems like all sockets are indeed gone by the time the curl BDS is closed, so it seems like there really was no point in freeing any socket just because a transfer is done. libcurl does invoke curl_sock_cb() with CURL_POLL_REMOVE for every socket it has. Buglink: https://bugs.launchpad.net/qemu/+bug/1916501 Signed-off-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210309130541.37540-3-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-03-19curl: Store BDRVCURLState pointer in CURLSocketMax Reitz1-4/+4
A socket does not really belong to any specific state. We do not need to store a pointer to "its" state in it, a pointer to the common BDRVCURLState is sufficient. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210309130541.37540-2-mreitz@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-01-02curl: remove compatibility code, require 7.29.0Paolo Bonzini1-28/+0
cURL 7.16.0 was released in October 2006. Just remove code that is in all likelihood not being used anywhere, and require the oldest version found in currently supported distros, which is 7.29.0 from CentOS 7. pkg-config is enough for QEMU, since it does not need extra information such as the path for certicate authorities. All supported platforms today will all have pkg-config for curl, so we can drop curl-config. Suggested-by: Daniel Berrangé <berrange@redhat.com> Reviewed-by: Daniel Berrangé <berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-11block/curl: Use lock guard macrosGan Qixin1-14/+14
Replace manual lock()/unlock() calls with lock guard macros (QEMU_LOCK_GUARD/WITH_QEMU_LOCK_GUARD) in block/curl. Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20201203075055.127773-3-ganqixin@huawei.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-07-10error: Eliminate error_propagate() with Coccinelle, part 1Markus Armbruster1-3/+1
When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-10qemu-option: Use returned bool to check for failureMarkus Armbruster1-2/+1
The previous commit enables conversion of foo(..., &err); if (err) { ... } to if (!foo(..., &err)) { ... } for QemuOpts functions that now return true / false on success / error. Coccinelle script: @@ identifier fun = { opts_do_parse, parse_option_bool, parse_option_number, parse_option_size, qemu_opt_parse, qemu_opt_rename, qemu_opt_set, qemu_opt_set_bool, qemu_opt_set_number, qemu_opts_absorb_qdict, qemu_opts_do_parse, qemu_opts_from_qdict_entry, qemu_opts_set, qemu_opts_validate }; expression list args, args2; typedef Error; Error *err; @@ - fun(args, &err, args2); - if (err) + if (!fun(args, &err, args2)) { ... } A few line breaks tidied up manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-15-armbru@redhat.com> [Conflict with commit 0b6786a9c1 "block/amend: refactor qcow2 amend options" resolved by rerunning Coccinelle on master's version]
2020-03-11block/curl: HTTP header field names are case insensitiveDavid Edmondson1-2/+3
RFC 7230 section 3.2 indicates that HTTP header field names are case insensitive. Signed-off-by: David Edmondson <david.edmondson@oracle.com> Message-Id: <20200224101310.101169-3-david.edmondson@oracle.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-03-11block/curl: HTTP header fields allow whitespace around valuesDavid Edmondson1-4/+27
RFC 7230 section 3.2 indicates that whitespace is permitted between the field name and field value and after the field value. Signed-off-by: David Edmondson <david.edmondson@oracle.com> Message-Id: <20200224101310.101169-2-david.edmondson@oracle.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-09-16curl: Check curl_multi_add_handle()'s return codeMax Reitz1-1/+7
If we had done that all along, debugging would have been much simpler. (Also, I/O errors are better than hangs.) Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190910124136.10565-8-mreitz@redhat.com Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-09-16curl: Handle success in multi_check_completionMax Reitz1-40/+29
Background: As of cURL 7.59.0, it verifies that several functions are not called from within a callback. Among these functions is curl_multi_add_handle(). curl_read_cb() is a callback from cURL and not a coroutine. Waking up acb->co will lead to entering it then and there, which means the current request will settle and the caller (if it runs in the same coroutine) may then issue the next request. In such a case, we will enter curl_setup_preadv() effectively from within curl_read_cb(). Calling curl_multi_add_handle() will then fail and the new request will not be processed. Fix this by not letting curl_read_cb() wake up acb->co. Instead, leave the whole business of settling the AIOCB objects to curl_multi_check_completion() (which is called from our timer callback and our FD handler, so not from any cURL callbacks). Reported-by: Natalie Gavrielov <ngavrilo@redhat.com> Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1740193 Cc: qemu-stable@nongnu.org Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190910124136.10565-7-mreitz@redhat.com Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-09-16curl: Report only ready socketsMax Reitz1-11/+6
Instead of reporting all sockets to cURL, only report the one that has caused curl_multi_do_locked() to be called. This lets us get rid of the QLIST_FOREACH_SAFE() list, which was actually wrong: SAFE foreaches are only safe when the current element is removed in each iteration. If it possible for the list to be concurrently modified, we cannot guarantee that only the current element will be removed. Therefore, we must not use QLIST_FOREACH_SAFE() here. Fixes: ff5ca1664af85b24a4180d595ea6873fd3deac57 Cc: qemu-stable@nongnu.org Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190910124136.10565-6-mreitz@redhat.com Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-09-16curl: Pass CURLSocket to curl_multi_do()Max Reitz1-9/+11
curl_multi_do_locked() currently marks all sockets as ready. That is not only inefficient, but in fact unsafe (the loop is). A follow-up patch will change that, but to do so, curl_multi_do_locked() needs to know exactly which socket is ready; and that is accomplished by this patch here. Cc: qemu-stable@nongnu.org Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190910124136.10565-5-mreitz@redhat.com Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-09-16curl: Check completion in curl_multi_do()Max Reitz1-12/+2
While it is more likely that transfers complete after some file descriptor has data ready to read, we probably should not rely on it. Better be safe than sorry and call curl_multi_check_completion() in curl_multi_do(), too, just like it is done in curl_multi_read(). With this change, curl_multi_do() and curl_multi_read() are actually the same, so drop curl_multi_read() and use curl_multi_do() as the sole FD handler. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190910124136.10565-4-mreitz@redhat.com Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-09-16curl: Keep *socket until the end of curl_sock_cb()Max Reitz1-5/+5
This does not really change anything, but it makes the code a bit easier to follow once we use @socket as the opaque pointer for aio_set_fd_handler(). Cc: qemu-stable@nongnu.org Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190910124136.10565-3-mreitz@redhat.com Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-09-16curl: Keep pointer to the CURLState in CURLSocketMax Reitz1-0/+3
A follow-up patch will make curl_multi_do() and curl_multi_read() take a CURLSocket instead of the CURLState. They still need the latter, though, so add a pointer to it to the former. Cc: qemu-stable@nongnu.org Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 20190910124136.10565-2-mreitz@redhat.com Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster1-0/+1
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-02-25block/curl: Implement bdrv_refresh_filename()Max Reitz1-0/+21
Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-id: 20190201192935.18394-29-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-02-25block/curl: Harmonize option defaultsMax Reitz1-5/+8
Both of the defaults we currently have in the curl driver are named based on a slightly different schema, let's unify that and call both CURL_BLOCK_OPT_${NAME}_DEFAULT. While at it, we can add a macro for the third option for which a default exists, namely "sslverify". Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-id: 20190201192935.18394-28-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-02-25block: Add strong_runtime_opts to BlockDriverMax Reitz1-0/+21
This new field can be set by block drivers to list the runtime options they accept that may influence the contents of the respective BDS. As of a follow-up patch, this list will be used by the common bdrv_refresh_filename() implementation to decide which options to put into BDS.full_open_options (and consequently whether a JSON filename has to be created), thus freeing the drivers of having to implement that logic themselves. Additionally, this patch adds the field to all of the block drivers that need it and sets it accordingly. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-id: 20190201192935.18394-22-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-01-31block/curl: Convert from DPRINTF() macro to trace eventsLaurent Vivier1-21/+8
Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Richard W.M. Jones <rjones@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20181213162727.17438-3-lvivier@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-11-05curl: Support auto-read-only optionKevin Wolf1-4/+4
If read-only=off, but auto-read-only=on is given, just degrade to read-only. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2018-09-24curl: Make sslverify=off disable host as well as peer verification.Richard W.M. Jones1-0/+2
The sslverify setting is supposed to turn off all TLS certificate checks in libcurl. However because of the way we use it, it only turns off peer certificate authenticity checks (CURLOPT_SSL_VERIFYPEER). This patch makes it also turn off the check that the server name in the certificate is the same as the server you're connecting to (CURLOPT_SSL_VERIFYHOST). We can use Google's server at 8.8.8.8 which happens to have a bad TLS certificate to demonstrate this: $ ./qemu-img create -q -f qcow2 -b 'json: { "file.sslverify": "off", "file.driver": "https", "file.url": "https://8.8.8.8/foo" }' /var/tmp/file.qcow2 qemu-img: /var/tmp/file.qcow2: CURL: Error opening file: SSL: no alternative certificate subject name matches target host name '8.8.8.8' Could not open backing image to determine size. With this patch applied, qemu-img connects to the server regardless of the bad certificate: $ ./qemu-img create -q -f qcow2 -b 'json: { "file.sslverify": "off", "file.driver": "https", "file.url": "https://8.8.8.8/foo" }' /var/tmp/file.qcow2 qemu-img: /var/tmp/file.qcow2: CURL: Error opening file: The requested URL returned error: 404 Not Found (The 404 error is expected because 8.8.8.8 is not actually serving a file called "/foo".) Of course the default (without sslverify=off) remains to always check the certificate: $ ./qemu-img create -q -f qcow2 -b 'json: { "file.driver": "https", "file.url": "https://8.8.8.8/foo" }' /var/tmp/file.qcow2 qemu-img: /var/tmp/file.qcow2: CURL: Error opening file: SSL: no alternative certificate subject name matches target host name '8.8.8.8' Could not open backing image to determine size. Further information about the two settings is available here: https://curl.haxx.se/libcurl/c/CURLOPT_SSL_VERIFYPEER.html https://curl.haxx.se/libcurl/c/CURLOPT_SSL_VERIFYHOST.html Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Message-id: 20180914095622.19698-1-rjones@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2018-07-23block: Fix typos in comments (found by codespell)Stefan Weil1-1/+1
Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-02-09Move include qemu/option.h from qemu-common.h to actual usersMarkus Armbruster1-1/+1
qemu-common.h includes qemu/option.h, but most places that include the former don't actually need the latter. Drop the include, and add it to the places that actually need it. While there, drop superfluous includes of both headers, and separate #include from file comment with a blank line. This cleanup makes the number of objects depending on qemu/option.h drop from 4545 (out of 4743) to 284 in my "build everything" tree. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-20-armbru@redhat.com> [Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
2018-02-09Include qapi/qmp/qbool.h exactly where neededMarkus Armbruster1-1/+0
Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-15-armbru@redhat.com>
2018-02-09Include qapi/qmp/qdict.h exactly where neededMarkus Armbruster1-0/+2
This cleanup makes the number of objects depending on qapi/qmp/qdict.h drop from 4550 (out of 4743) to 368 in my "build everything" tree. For qapi/qmp/qobject.h, the number drops from 4552 to 390. While there, separate #include from file comment with a blank line. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-13-armbru@redhat.com>
2018-02-08curl: convert to CoQueuePaolo Bonzini1-16/+4
Now that CoQueues can use a QemuMutex for thread-safety, there is no need for curl to roll its own coroutine queue. Coroutines can be placed directly on the queue instead of using a list of CURLAIOCBs. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20180203153935.8056-6-pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2017-12-18block/curl: fix minor memory leaksJeff Cody1-0/+6
Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-12-18block/curl: check error return of curl_global_init()Jeff Cody1-6/+12
If curl_global_init() fails, per the documentation no other curl functions may be called, so make sure to check the return value. Also, some minor changes to the initialization latch variable 'inited': - Make it static in the file, for clarity - Change the name for clarity - Make it a bool Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Richard W.M. Jones <rjones@redhat.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-05-16curl: do not do aio_poll when waiting for a free CURLStatePaolo Bonzini1-1/+15
Instead, put the CURLAIOCB on a wait list and yield; curl_clean_state will wake the corresponding coroutine. Because of CURL's callback-based structure, we cannot easily convert everything to CoMutex/CoQueue; keeping the QemuMutex is simpler. However, CoQueue is a simple wrapper around a linked list, so we can easily use QSIMPLEQ and open-code a CoQueue, protected by the BDRVCURLState QemuMutex instead of a CoMutex. Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 20170515100059.15795-8-pbonzini@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-05-16curl: convert readv to coroutinesPaolo Bonzini1-56/+38
This is pretty simple. The bottom half goes away because, unlike bdrv_aio_readv, coroutine-based read can return immediately without yielding. However, for simplicity I kept the former bottom half handler in a separate function. Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 20170515100059.15795-7-pbonzini@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-05-16curl: convert CURLAIOCB to byte valuesPaolo Bonzini1-22/+22
This is in preparation for the conversion from bdrv_aio_readv to bdrv_co_preadv, and it also requires changing some of the size_t values to uint64_t. This was broken before for disks > 2TB, but now it would break at 4GB. Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 20170515100059.15795-6-pbonzini@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-05-16curl: split curl_find_state/curl_init_statePaolo Bonzini1-22/+30
If curl_easy_init fails, a CURLState is left with s->in_use = 1. Split curl_init_state in two, so that we can distinguish the two failures and call curl_clean_state if needed. While at it, simplify curl_find_state, removing a dummy loop. The aio_poll loop is moved to the sole caller that needs it. Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 20170515100059.15795-5-pbonzini@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-05-16curl: avoid recursive locking of BDRVCURLState mutexPaolo Bonzini1-1/+13
The curl driver has a ugly hack where, if it cannot find an empty CURLState, it just uses aio_poll to wait for one to be empty. This is probably buggy when used together with dataplane, and the simplest way to fix it is to use coroutines instead. A more immediate effect of the bug however is that it can cause a recursive call to curl_readv_bh_cb and recursively taking the BDRVCURLState mutex. This causes a deadlock. The fix is to unlock the mutex around aio_poll, but for cleanliness we should also take the mutex around all calls to curl_init_state, even if reaching the unlock/lock pair is impossible. The same is true for curl_clean_state. Reported-by: Kun Wei <kuwei@redhat.com> Tested-by: Richard W.M. Jones <rjones@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20170515100059.15795-4-pbonzini@redhat.com Cc: qemu-stable@nongnu.org Cc: Jeff Cody <jcody@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-05-16curl: never invoke callbacks with s->mutex heldPaolo Bonzini1-4/+8
All curl callbacks go through curl_multi_do, and hence are called with s->mutex held. Note that with comments, and make curl_read_cb drop the lock before invoking the callback. Likewise for curl_find_buf, where the callback can be invoked by the caller. Cc: qemu-stable@nongnu.org Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 20170515100059.15795-3-pbonzini@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-05-16curl: strengthen assertion in curl_clean_statePaolo Bonzini1-0/+5
curl_clean_state should only be called after all AIOCBs have been completed. This is not so obvious for the call from curl_detach_aio_context, so assert that. Cc: qemu-stable@nongnu.org Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 20170515100059.15795-2-pbonzini@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-05-16block: curl: Allow passing cookies via QCryptoSecretPeter Krempa1-1/+23
Since cookies can contain sensitive data (session ID, etc ...) it is desired to hide them from the prying eyes of users. Add a possibility to pass them via the secret infrastructure. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1447413 Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-id: f4a22cdebdd0bca6a13a43a2a6deead7f2ec4bb3.1493906281.git.pkrempa@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-05-09qobject: Use simpler QDict/QList scalar insertion macrosEric Blake1-1/+1
We now have macros in place to make it less verbose to add a scalar to QDict and QList, so use them. Patch created mechanically via: spatch --sp-file scripts/coccinelle/qobject.cocci \ --macro-file scripts/cocci-macro-file.h --dir . --in-place then touched up manually to fix a couple of '?:' back to original spacing, as well as avoiding a long line in monitor.c. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20170427215821.19397-7-eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-03-31block/curl: Check protocol prefixMax Reitz1-0/+10
If the user has explicitly specified a block driver and thus a protocol, we have to make sure the URL's protocol prefix matches. Otherwise the latter will silently override the former which might catch some users by surprise. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20170331120431.1767-3-mreitz@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-03-17curl: fix compilation on OpenBSDPaolo Bonzini1-1/+1
EPROTO is not found in OpenBSD. We usually use EIO when no better errno is available, do that here too. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20170317152412.8472-1-pbonzini@redhat.com Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-27curl: do not use aio_context_acquire/releasePaolo Bonzini1-9/+15
Now that all bottom halves and callbacks take care of taking the AioContext lock, we can migrate some users away from it and to a specific QemuMutex or CoMutex. Protect BDRVCURLState access with a QemuMutex. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20170222180725.28611-2-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-02-21block: explicitly acquire aiocontext in aio callbacks that need itPaolo Bonzini1-1/+1
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170213135235.12274-16-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-02-21block: explicitly acquire aiocontext in bottom halves that need itPaolo Bonzini1-8/+18
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170213135235.12274-15-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-02-21block: explicitly acquire aiocontext in callbacks that need itPaolo Bonzini1-3/+13
This covers both file descriptor callbacks and polling callbacks, since they execute related code. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170213135235.12274-14-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-02-21block: explicitly acquire aiocontext in timers that need itPaolo Bonzini1-0/+2
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170213135235.12274-13-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-03aio: add AioPollFn and io_poll() interfaceStefan Hajnoczi1-4/+4
The new AioPollFn io_poll() argument to aio_set_fd_handler() and aio_set_event_handler() is used in the next patch. Keep this code change separate due to the number of files it touches. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161201192652.9509-3-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>