aboutsummaryrefslogtreecommitdiff
path: root/authz
AgeCommit message (Collapse)AuthorFilesLines
2021-06-25configure, meson: convert pam detection to mesonPaolo Bonzini1-1/+1
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-02docs: fix references to docs/devel/tracing.rstStefano Garzarella1-1/+1
Commit e50caf4a5c ("tracing: convert documentation to rST") converted docs/devel/tracing.txt to docs/devel/tracing.rst. We still have several references to the old file, so let's fix them with the following command: sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt) Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210517151702.109066-2-sgarzare@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-11-18authz-simple: Check that 'identity' property is setKevin Wolf1-0/+14
If the 'identify' property is not set, we'll pass a NULL pointer to g_str_equal() and crash. Catch the error condition during the creation of the object. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-11-18authz-pam: Check that 'service' property is setKevin Wolf1-0/+6
If the 'service' property is not set, we'll call pam_start() with a NULL pointer for the service name. This fails and leaves a message like this in the syslog: qemu-storage-daemon[294015]: PAM pam_start: invalid argument: service == NULL Make specifying the property mandatory and catch the error already during the creation of the object. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-11-18authz-list-file: Improve an error messageMarkus Armbruster1-1/+2
When qauthz_list_file_load() rejects JSON values other than JSON object with a rather confusing error message: $ echo 1 | qemu-system-x86_64 -nodefaults -S -display none -object authz-list-file,id=authz0,filename=/dev/stdin qemu-system-x86_64: -object authz-list-file,id=authz0,filename=/dev/stdin: Invalid parameter type for 'obj', expected: dict Improve to qemu-system-x86_64: -object authz-list-file,id=authz0,filename=/dev/stdin: File '/dev/stdin' must contain a JSON object Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-11-18authz-list-file: Fix file read error handlingMarkus Armbruster1-0/+3
The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. qauthz_list_file_complete() is wrong that way: it passes @errp to qauthz_list_file_complete() without checking for failure. If it runs into another failure, it trips error_setv()'s assertion. Reproducer: $ qemu-system-x86_64 -nodefaults -S -display none -object authz-list-file,id=authz0,filename= qemu-system-x86_64: ../util/error.c:59: error_setv: Assertion `*errp == NULL' failed. Aborted (core dumped) Fix it to check for failure. Fixes: 55d869846de802a16af1a50584c51737bd664387 Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-10-29authz: Fix Lesser GPL version numberChetan Pant5-5/+5
There is no "version 2" of the "Lesser" General Public License. It is either "GPL version 2.0" or "Lesser GPL version 2.1". This patch replaces all occurrences of "Lesser GPL version 2" with "Lesser GPL version 2.1" in comment section. Signed-off-by: Chetan Pant <chetan4windows@gmail.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-10-13authz-list-file: Fix crash when filename is not setEduardo Habkost1-0/+5
Fix the following crash: $ qemu-system-x86_64 -object authz-list-file,id=obj0 qemu-system-x86_64: -object authz-list-file,id=obj0: GLib: g_file_get_contents: assertion 'filename != NULL' failed Segmentation fault (core dumped) Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Message-Id: <20201008202713.1416823-2-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-10-12authz: Move the creation of the library to the main meson.buildPhilippe Mathieu-Daudé1-10/+0
Be consistent creating all the libraries in the main meson.build file. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20201006125602.2311423-9-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-18qom: Remove ParentClassType argument from OBJECT_DECLARE_SIMPLE_TYPEEduardo Habkost4-4/+0
The requirement to specify the parent class type makes the macro harder to use and easy to misuse (silent bugs can be introduced if the wrong struct type is specified). Simplify the macro by just not declaring any class struct, allowing us to remove the class_size field from the TypeInfo variables for those types. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200916182519.415636-3-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-21meson: convert authz directory to MesonMarc-André Lureau2-7/+19
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21trace: switch position of headers to what Meson requiresPaolo Bonzini1-0/+1
Meson doesn't enjoy the same flexibility we have with Make in choosing the include path. In particular the tracing headers are using $(build_root)/$(<D). In order to keep the include directives unchanged, the simplest solution is to generate headers with patterns like "trace/trace-audio.h" and place forwarding headers in the source tree such that for example "audio/trace.h" includes "trace/trace-audio.h". This patch is too ugly to be applied to the Makefiles now. It's only a way to separate the changes to the tracing header files from the Meson rewrite of the tracing logic. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-05-15qom: Drop parameter @errp of object_property_add() & friendsMarkus Armbruster4-11/+6
The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-02-07authz: fix usage of bool in listfile.cJafar Abdi1-1/+1
Clean up wrong usage of FALSE and TRUE in places that use "bool" from stdbool.h. FALSE and TRUE (with capital letters) are the constants defined by glib for being used with the "gboolean" type of glib. But some parts of the code also use TRUE and FALSE for variables that are declared as "bool" (the type from <stdbool.h>). Signed-off-by: Jafar Abdi <cafer.abdi@gmail.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster5-0/+5
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-05-13authz: Normalize #include "authz/trace.h" to "trace.h"Markus Armbruster5-5/+5
Include the generated trace.h the same way as we do everywhere else. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190315145123.28030-3-armbru@redhat.com> Acked-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-04-02filemon: fix watch IDs to avoid potential wraparound issuesDaniel P. Berrangé1-1/+1
Watch IDs are allocated from incrementing a int counter against the QFileMonitor object. In very long life QEMU processes with a huge amount of USB MTP activity creating & deleting directories it is just about conceivable that the int counter can wrap around. This would result in incorrect behaviour of the file monitor watch APIs due to clashing watch IDs. Instead of trying to detect this situation, this patch changes the way watch IDs are allocated. It is turned into an int64_t variable where the high 32 bits are set from the underlying inotify "int" ID. This gives an ID that is guaranteed unique for the directory as a whole, and we can rely on the kernel to enforce this. QFileMonitor then sets the low 32 bits from a per-directory counter. The USB MTP device only sets watches on the directory as a whole, not files within, so there is no risk of guest triggered wrap around on the low 32 bits. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-22trace-events: Fix attribution of trace points to sourceMarkus Armbruster1-1/+1
Some trace points are attributed to the wrong source file. Happens when we neglect to update trace-events for code motion, or add events in the wrong place, or misspell the file name. Clean up with help of cleanup-trace-events.pl. Same funnies as in the previous commit, of course. Manually shorten its change to linux-user/trace-events to */signal.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-id: 20190314180929.27722-6-armbru@redhat.com Message-Id: <20190314180929.27722-6-armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-22trace-events: Shorten file names in commentsMarkus Armbruster1-5/+5
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to source files. That's because when trace-events got split up, the comments were moved verbatim. Delete the sub/dir/ part from these comments. Gets rid of several misspellings. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190314180929.27722-3-armbru@redhat.com Message-Id: <20190314180929.27722-3-armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-02-26authz: add QAuthZPAM object type for authorizing using PAMDaniel P. Berrange3-0/+154
Add an authorization backend that talks to PAM to check whether the user identity is allowed. This only uses the PAM account validation facility, which is essentially just a check to see if the provided username is permitted access. It doesn't use the authentication or session parts of PAM, since that's dealt with by the relevant part of QEMU (eg VNC server). Consider starting QEMU with a VNC server and telling it to use TLS with x509 client certificates and configuring it to use an PAM to validate the x509 distinguished name. In this example we're telling it to use PAM for the QAuthZ impl with a service name of "qemu-vnc" $ qemu-system-x86_64 \ -object tls-creds-x509,id=tls0,dir=/home/berrange/security/qemutls,\ endpoint=server,verify-peer=yes \ -object authz-pam,id=authz0,service=qemu-vnc \ -vnc :1,tls-creds=tls0,tls-authz=authz0 This requires an /etc/pam/qemu-vnc file to be created with the auth rules. A very simple file based whitelist can be setup using $ cat > /etc/pam/qemu-vnc <<EOF account requisite pam_listfile.so item=user sense=allow file=/etc/qemu/vnc.allow EOF The /etc/qemu/vnc.allow file simply contains one username per line. Any username not in the file is denied. The usernames in this example are the x509 distinguished name from the client's x509 cert. $ cat > /etc/qemu/vnc.allow <<EOF CN=laptop.berrange.com,O=Berrange Home,L=London,ST=London,C=GB EOF More interesting would be to configure PAM to use an LDAP backend, so that the QEMU authorization check data can be centralized instead of requiring each compute host to have file maintained. The main limitation with this PAM module is that the rules apply to all QEMU instances on the host. Setting up different rules per VM, would require creating a separate PAM service name & config file for every guest. An alternative approach for the future might be to not pass in the plain username to PAM, but instead combine the VM name or UUID with the username. This requires further consideration though. Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2019-02-26authz: add QAuthZListFile object type for a file access control listDaniel P. Berrangé3-0/+288
Add a QAuthZListFile object type that implements the QAuthZ interface. This built-in implementation is a proxy around the QAuthZList object type, initializing it from an external file, and optionally, automatically reloading it whenever it changes. To create an instance of this object via the QMP monitor, the syntax used would be: { "execute": "object-add", "arguments": { "qom-type": "authz-list-file", "id": "authz0", "props": { "filename": "/etc/qemu/vnc.acl", "refresh": true } } } If "refresh" is "yes", inotify is used to monitor the file, automatically reloading changes. If an error occurs during reloading, all authorizations will fail until the file is next successfully loaded. The /etc/qemu/vnc.acl file would contain a JSON representation of a QAuthZList object { "rules": [ { "match": "fred", "policy": "allow", "format": "exact" }, { "match": "bob", "policy": "allow", "format": "exact" }, { "match": "danb", "policy": "deny", "format": "glob" }, { "match": "dan*", "policy": "allow", "format": "exact" }, ], "policy": "deny" } This sets up an authorization rule that allows 'fred', 'bob' and anyone whose name starts with 'dan', except for 'danb'. Everyone unmatched is denied. The object can be loaded on the comand line using -object authz-list-file,id=authz0,filename=/etc/qemu/vnc.acl,refresh=yes Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-02-26authz: add QAuthZList object type for an access control listDaniel P. Berrange3-0/+276
Add a QAuthZList object type that implements the QAuthZ interface. This built-in implementation maintains a trivial access control list with a sequence of match rules and a final default policy. This replicates the functionality currently provided by the qemu_acl module. To create an instance of this object via the QMP monitor, the syntax used would be: { "execute": "object-add", "arguments": { "qom-type": "authz-list", "id": "authz0", "props": { "rules": [ { "match": "fred", "policy": "allow", "format": "exact" }, { "match": "bob", "policy": "allow", "format": "exact" }, { "match": "danb", "policy": "deny", "format": "glob" }, { "match": "dan*", "policy": "allow", "format": "exact" }, ], "policy": "deny" } } } This sets up an authorization rule that allows 'fred', 'bob' and anyone whose name starts with 'dan', except for 'danb'. Everyone unmatched is denied. It is not currently possible to create this via -object, since there is no syntax supported to specify non-scalar properties for objects. This is likely to be addressed by later support for using JSON with -object, or an equivalent approach. In any case the future "authz-listfile" object can be used from the CLI and is likely a better choice, as it allows the ACL to be refreshed automatically on change. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2019-02-26authz: add QAuthZSimple object type for easy whitelist auth checksDaniel P. Berrangé3-0/+119
In many cases a single VM will just need to whitelist a single identity as the allowed user of network services. This is especially the case for TLS live migration (optionally with NBD storage) where we just need to whitelist the x509 certificate distinguished name of the source QEMU host. Via QMP this can be configured with: { "execute": "object-add", "arguments": { "qom-type": "authz-simple", "id": "authz0", "props": { "identity": "fred" } } } Or via the command line -object authz-simple,id=authz0,identity=fred Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2019-02-26authz: add QAuthZ object as an authorization base classDaniel P. Berrange3-0/+87
The current qemu_acl module provides a simple access control list facility inside QEMU, which is used via a set of monitor commands acl_show, acl_policy, acl_add, acl_remove & acl_reset. Note there is no ability to create ACLs - the network services (eg VNC server) were expected to create ACLs that they want to check. There is also no way to define ACLs on the command line, nor potentially integrate with external authorization systems like polkit, pam, ldap lookup, etc. The QAuthZ object defines a minimal abstract QOM class that can be subclassed for creating different authorization providers. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>