aboutsummaryrefslogtreecommitdiff
path: root/accel
AgeCommit message (Collapse)AuthorFilesLines
2021-09-21accel/tcg: Restrict cpu_handle_halt() to sysemuPhilippe Mathieu-Daudé1-2/+4
Commit 372579427a5 ("tcg: enable thread-per-vCPU") added the following comment describing EXCP_HALTED in qemu_tcg_cpu_thread_fn(): case EXCP_HALTED: /* during start-up the vCPU is reset and the thread is * kicked several times. If we don't ensure we go back * to sleep in the halted state we won't cleanly * start-up when the vCPU is enabled. * * cpu->halted should ensure we sleep in wait_io_event */ g_assert(cpu->halted); break; qemu_wait_io_event() is sysemu-specific, so we can restrict the cpu_handle_halt() call in cpu_exec() to system emulation. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210912172731.789788-2-f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-09-21arm/hvf: Add a WFI handlerPeter Collingbourne1-3/+2
Sleep on WFI until the VTIMER is due but allow ourselves to be woken up on IPI. In this implementation IPI is blocked on the CPU thread at startup and pselect() is used to atomically unblock the signal and begin sleeping. The signal is sent unconditionally so there's no need to worry about races between actually sleeping and the "we think we're sleeping" state. It may lead to an extra wakeup but that's better than missing it entirely. Signed-off-by: Peter Collingbourne <pcc@google.com> Signed-off-by: Alexander Graf <agraf@csgraf.de> Acked-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Message-id: 20210916155404.86958-6-agraf@csgraf.de [agraf: Remove unused 'set' variable, always advance PC on WFX trap, support vm stop / continue operations and cntv offsets] Signed-off-by: Alexander Graf <agraf@csgraf.de> Acked-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-20hvf: Add Apple Silicon supportAlexander Graf1-0/+9
With Apple Silicon available to the masses, it's a good time to add support for driving its virtualization extensions from QEMU. This patch adds all necessary architecture specific code to get basic VMs working, including save/restore. Known limitations: - WFI handling is missing (follows in later patch) - No watchpoint/breakpoint support Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210916155404.86958-5-agraf@csgraf.de [PMM: added missing #include] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-20hvf: Introduce hvf_arch_init() callbackAlexander Graf1-1/+2
We will need to install a migration helper for the ARM hvf backend. Let's introduce an arch callback for the overall hvf init chain to do so. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210916155404.86958-4-agraf@csgraf.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-20hvf: Add execute to dirty log permission bitmapAlexander Graf1-2/+2
Hvf's permission bitmap during and after dirty logging does not include the HV_MEMORY_EXEC permission. At least on Apple Silicon, this leads to instruction faults once dirty logging was enabled. Add the bit to make it work properly. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210916155404.86958-3-agraf@csgraf.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-16Merge remote-tracking branch ↵Peter Maydell1-1/+1
'remotes/vivier2/tags/trivial-branch-for-6.2-pull-request' into staging Trivial patches pull request 20210916 # gpg: Signature made Thu 16 Sep 2021 15:09:39 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-6.2-pull-request: target/sparc: Make sparc_cpu_dump_state() static target/avr: Fix compiler errors (-Werror=enum-conversion) hw/vfio: Fix typo in comments intel_iommu: Fix typo in comments target/i386: spelling: occured=>occurred, mininum=>minimum configure: add missing pc-bios/qemu_vga.ndrv symlink in build tree spelling: sytem => system qdev: Complete qdev_init_gpio_out() documentation hw/i386/acpi-build: Fix a typo util: Remove redundant checks in the openpty() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-16target/i386: spelling: occured=>occurred, mininum=>minimumMichael Tokarev1-1/+1
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Message-Id: <20210818141352.417716-1-mjt@msgid.tls.msk.ru> [lv: add mininum=>minimum in subject] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-14accel/tcg/user-exec: Fix read-modify-write of code on s390 hostsIlya Leoshkevich1-7/+41
x86_64 dotnet/runtime uses cmpxchg for code patching. When running it under s390x qemu-linux user, cpu_signal_handler() does not recognize this as a write and does not restore PAGE_WRITE cleared by tb_page_add(), incorrectly forwarding the signal to the guest code. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210803221606.150103-1-iii@linux.ibm.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-09-14accel/tcg: Restrict TCGCPUOps::cpu_exec_interrupt() to sysemuPhilippe Mathieu-Daudé1-3/+7
All targets call TCGCPUOps::cpu_exec_interrupt() from sysemu code. Move its declaration to restrict it to system emulation. Extend the code guarded. Restrict the static inlined need_replay_interrupt() method to avoid a "defined but not used" warning. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210911165434.531552-24-f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-09-14accel/tcg: Rename user-mode do_interrupt hack as fake_user_interruptPhilippe Mathieu-Daudé1-2/+2
do_interrupt() is sysemu specific. However due to some X86 specific hack, it is also used in user-mode emulation, which is why it couldn't be restricted to CONFIG_SOFTMMU (see the comment around added in commit 78271684719: "cpu: tcg_ops: move to tcg-cpu-ops.h, keep a pointer in CPUClass"). Keep the hack but rename the handler as fake_user_interrupt() and restrict do_interrupt() to sysemu. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210911165434.531552-6-f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-09-14accel/tcg: remove redundant TCG_KICK_PERIOD defineLuc Michel1-2/+0
The TCG_KICK_PERIOD macro is already defined in tcg-accel-ops-rr.h. Remove it from tcg-accel-ops-rr.c. Signed-off-by: Luc Michel <lmichel@kalray.eu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210811141229.12470-1-lmichel@kalray.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-09-14accel/tcg: Clear PAGE_WRITE before translationIlya Leoshkevich2-25/+73
translate_insn() implementations fetch instruction bytes piecemeal, which can cause qemu-user to generate inconsistent translations if another thread modifies them concurrently [1]. Fix by making pages containing translated instruction non-writable right before loading instruction bytes from them. [1] https://lists.nongnu.org/archive/html/qemu-devel/2021-08/msg00644.html Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Message-Id: <20210805204835.158918-1-iii@linux.ibm.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-30accel/tcg: Remove double bswap for helper_atomic_sto_*_mmuRichard Henderson1-1/+0
This crept in as either a cut-and-paste error, or rebase error. Fixes: cfec388518d ("atomic_template: add inline trace/plugin helpers") Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210729004647.282017-24-richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-29kvm: ppc: Print meaningful message on KVM_CREATE_VM failureFabiano Rosas1-0/+6
PowerPC has two KVM types (HV, PR) that translate into three kernel modules: kvm.ko - common kvm code kvm_hv.ko - kvm running with MSR_HV=1 or MSR_HV|PR=0 in a nested guest. kvm_pr.ko - kvm running in usermode MSR_PR=1. Since the two KVM types can both be running at the same time, this creates a situation in which it is possible for one or both of the modules to fail to initialize, leaving the generic one behind. This leads QEMU to think it can create a guest, but KVM will fail when calling the type-specific code: ioctl(KVM_CREATE_VM) failed: 22 Invalid argument qemu-kvm: failed to initialize KVM: Invalid argument Ideally this would be solved kernel-side, but it might be a while until we can get rid of one of the modules. So in the meantime this patch tries to make this less confusing for the end user by adding a more elucidative message: ioctl(KVM_CREATE_VM) failed: 22 Invalid argument PPC KVM module is not loaded. Try 'modprobe kvm_hv'. [dwg: Fixed error in #elif which failed compile on !ppc hosts] Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Message-Id: <20210722141340.2367905-1-farosas@linux.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-07-26accel/tcg: Remove unused variable in cpu_execRichard Henderson1-8/+2
From clang-13: accel/tcg/cpu-exec.c:783:15: error: variable 'cc' set but not used \ [-Werror,-Wunused-but-set-variable] Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-26accel/tcg: Remove unnecessary check on icount_extra in cpu_loop_exec_tb()Peter Maydell1-1/+3
In cpu_loop_exec_tb(), we decide whether to look for a TB with exactly insns_left instructions in it using the condition (!cpu->icount_extra && insns_left > 0 && insns_left < tb->icount) The check for icount_extra == 0 is unnecessary, because we just set insns_left = MIN(0xffff, cpu->icount_budget); icount_extra = icount_budget - insns_left; and so icount_extra can only be non-zero if icount_budget > 0xffff and insns_left == 0xffff. But in that case insns_left >= tb->icount because 0xffff is much larger than TCG_MAX_INSNS, so the condition will be false anyway. Remove the unnecessary check, and instead assert: * that we are only going to execute a partial TB here if the icount budget has run out (ie icount_extra == 0) * that the number of insns we're going to execute does fit into the CF_COUNT_MASK Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210725174405.24568-3-peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-26accel/tcg: Don't use CF_COUNT_MASK as the max value of icount_decr.u16.lowPeter Maydell1-1/+1
In cpu_loop_exec_tb() we were bounding the number of insns we might try to execute in a TB using CF_COUNT_MASK. This is incorrect, because we can validly put up to 0xffff into icount_decr.u16.low. In particular, since commit 78ff82bb1b67c0d7 reduced CF_COUNT_MASK to 511 this meant that we would incorrectly only try to execute 511 instructions in a 512-instruction TB, which could result in QEMU hanging when in icount mode. Use the actual maximum value, which is 0xffff. (This brings this code in to line with the similar logic in icount_prepare_for_run() in tcg-accel-ops-icount.c.) Fixes: 78ff82bb1b67c0d7 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Resolves: https://gitlab.com/qemu-project/qemu/-/issues/499 Message-Id: <20210725174405.24568-2-peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-21accel/tcg: Record singlestep_enabled in tb->cflagsRichard Henderson3-11/+7
Set CF_SINGLE_STEP when single-stepping is enabled. This avoids the need to flush all tb's when turning single-stepping on or off. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-21accel/tcg: Hoist tb_cflags to a local in translator_loopRichard Henderson1-5/+4
The access internal to tb_cflags() is atomic. Avoid re-reading it as such for the multiple uses. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-21accel/tcg: Move breakpoint recognition outside translationRichard Henderson2-26/+89
Trigger breakpoints before beginning translation of a TB that would begin with a BP. Thus we never generate code for the BP at all. Single-step instructions within a page containing a BP so that we are sure to check each insn for the BP as above. We no longer need to flush any TBs when changing BPs. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/286 Resolves: https://gitlab.com/qemu-project/qemu/-/issues/404 Resolves: https://gitlab.com/qemu-project/qemu/-/issues/489 Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-21accel/tcg: Merge tb_find into its only callerRichard Henderson1-43/+42
We are going to want two things: (1) check for breakpoints will want to break out of the loop here, (2) cflags can only be calculated with pc in hand. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-21accel/tcg: Use CF_NO_GOTO_{TB, PTR} in cpu_exec_step_atomicRichard Henderson1-3/+8
Request that the one TB returns immediately, so that we release the exclusive lock as soon as possible. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210717221851.2124573-7-richard.henderson@linaro.org>
2021-07-21accel/tcg: Handle -singlestep in curr_cflagsRichard Henderson3-3/+9
Exchange the test in translator_use_goto_tb for CF_NO_GOTO_TB, and the test in tb_gen_code for setting CF_COUNT_MASK to 1. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20210717221851.2124573-6-richard.henderson@linaro.org>
2021-07-21accel/tcg: Drop CF_NO_GOTO_PTR from -d nochainRichard Henderson1-1/+1
The purpose of suppressing goto_ptr from -d nochain had been to return to the main loop so that -d cpu would be recognized. But we now include -d cpu logging in helper_lookup_tb_ptr so there is no need to exclude goto_ptr. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20210717221851.2124573-5-richard.henderson@linaro.org>
2021-07-21accel/tcg: Add CF_NO_GOTO_TB and CF_NO_GOTO_PTRRichard Henderson2-1/+12
Move the -d nochain check to bits on tb->cflags. These will be used for more than -d nochain shortly. Set bits during curr_cflags, test them in translator_use_goto_tb, assert we're not doing anything odd in tcg_gen_goto_tb. The test in tcg_gen_exit_tb is redundant with the assert for goto_tb_issue_mask. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20210717221851.2124573-4-richard.henderson@linaro.org>
2021-07-21accel/tcg: Move curr_cflags into cpu-exec.cRichard Henderson1-0/+5
We will shortly have more than a simple member read here, with stuff not necessarily exposed to exec/exec-all.h. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210717221851.2124573-3-richard.henderson@linaro.org>
2021-07-21accel/tcg: Reduce CF_COUNT_MASK to match TCG_MAX_INSNSRichard Henderson1-3/+2
The space reserved for CF_COUNT_MASK was overly large. Reduce to free up cflags bits and eliminate an extra test. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20210717221851.2124573-2-richard.henderson@linaro.org>
2021-07-21accel/tcg: Push trace info building into atomic_common.c.incRichard Henderson2-48/+37
Use trace_mem_get_info instead of trace_mem_build_info, using the TCGMemOpIdx that we already have. Do this in the atomic_trace_*_pre function as common subroutines. Tested-by: Cole Robinson <crobinso@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-21accel/tcg: Expand ATOMIC_MMU_LOOKUP_*Richard Henderson3-24/+36
Unify the parameters of atomic_mmu_lookup between cputlb.c and user-exec.c. Call the function directly, and remove the macros. Tested-by: Cole Robinson <crobinso@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-21accel/tcg: Remove ATOMIC_MMU_DECLSRichard Henderson3-14/+0
All definitions are now empty. Tested-by: Cole Robinson <crobinso@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-21accel/tcg: Fold EXTRA_ARGS into atomic_template.hRichard Henderson3-18/+20
All instances of EXTRA_ARGS are now identical. Tested-by: Cole Robinson <crobinso@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-21accel/tcg: Standardize atomic helpers on softmmu apiRichard Henderson4-104/+70
Reduce the amount of code duplication by always passing the TCGMemOpIdx argument to helper_atomic_*. This is not currently used for user-only, but it's easy to ignore. Tested-by: Cole Robinson <crobinso@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-21tcg: Rename helper_atomic_*_mmu and provide for user-onlyRichard Henderson2-20/+39
Always provide the atomic interface using TCGMemOpIdx oi and uintptr_t retaddr. Rename from helper_* to cpu_* so as to (mostly) match the exec/cpu_ldst.h functions, and to emphasize that they are not callable from TCG directly. Tested-by: Cole Robinson <crobinso@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-21qemu/atomic: Add aligned_{int64,uint64}_t typesRichard Henderson1-2/+2
Use it to avoid some clang-12 -Watomic-alignment errors, forcing some structures to be aligned and as a pointer when we have ensured that the address is aligned. Tested-by: Cole Robinson <crobinso@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-14plugins: fix-up handling of internal hostaddr for 32 bitAlex Bennée1-1/+1
The compiler rightly complains when we build on 32 bit that casting uint64_t into a void is a bad idea. We are really dealing with a host pointer at this point so treat it as such. This does involve a uintptr_t cast of the result of the TLB addend as we know that has to point to the host memory. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210709143005.1554-28-alex.bennee@linaro.org>
2021-07-12Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20210710' ↵Peter Maydell6-105/+113
into staging Add translator_use_goto_tb. Cleanups in prep of breakpoint fixes. Misc fixes. # gpg: Signature made Sat 10 Jul 2021 16:29:14 BST # gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F # gpg: issuer "richard.henderson@linaro.org" # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full] # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth-gitlab/tags/pull-tcg-20210710: (41 commits) cpu: Add breakpoint tracepoints tcg: Remove TCG_TARGET_HAS_goto_ptr accel/tcg: Log tb->cflags with -d exec accel/tcg: Split out log_cpu_exec accel/tcg: Move tb_lookup to cpu-exec.c accel/tcg: Move helper_lookup_tb_ptr to cpu-exec.c target/i386: Use cpu_breakpoint_test in breakpoint_handler tcg: Fix prologue disassembly target/xtensa: Use translator_use_goto_tb target/tricore: Use tcg_gen_lookup_and_goto_ptr target/tricore: Use translator_use_goto_tb target/sparc: Use translator_use_goto_tb target/sh4: Use translator_use_goto_tb target/s390x: Remove use_exit_tb target/s390x: Use translator_use_goto_tb target/rx: Use translator_use_goto_tb target/riscv: Use translator_use_goto_tb target/ppc: Use translator_use_goto_tb target/openrisc: Use translator_use_goto_tb target/nios2: Use translator_use_goto_tb ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-07-09accel/tcg: Log tb->cflags with -d execRichard Henderson1-3/+3
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-09accel/tcg: Split out log_cpu_execRichard Henderson1-27/+34
Split out CPU_LOG_EXEC and CPU_LOG_TB_CPU logging from cpu_tb_exec to a new function. Perform only one pc range check after a combined mask check. Use the new function in lookup_tb_ptr. This enables CPU_LOG_TB_CPU between indirectly chained tbs. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-09accel/tcg: Move tb_lookup to cpu-exec.cRichard Henderson2-50/+30
Now that we've moved helper_lookup_tb_ptr, the only user of tb-lookup.h is cpu-exec.c; merge the contents in. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-09accel/tcg: Move helper_lookup_tb_ptr to cpu-exec.cRichard Henderson2-22/+30
This will allow additional code sharing. No functional change. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-09accel/tcg: Introduce translator_use_goto_tbRichard Henderson1-0/+11
Add a generic version of the common use_goto_tb test. Various targets avoid the page crossing test for CONFIG_USER_ONLY, but that is wrong: mmap and mprotect can change page permissions. Reviewed-by: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-09tcg: Move tb_phys_invalidate_count to tb_ctxRichard Henderson2-4/+5
We can call do_tb_phys_invalidate from an iocontext, which has no per-thread tcg_ctx. Move this to tb_ctx, which is global. The actual update still takes place with a lock held, so only an atomic set is required, not an atomic increment. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/457 Tested-by: Viktor Ashirov <vashirov@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-09tcg: Bake tb_destroy() into tcg_region_treeLiren Wei1-6/+0
The function is called only at tcg_gen_code() when duplicated TBs are translated by different threads, and when the tcg_region_tree is reset. Bake it into the underlying GTree as its value destroy function to unite these situations. Also remove tcg_region_tree_traverse() which now becomes useless. Signed-off-by: Liren Wei <lrwei@bupt.edu.cn> Message-Id: <8dc352f08d038c4e7a1f5f56962398cdc700c3aa.1625404483.git.lrwei@bupt.edu.cn> [rth: Name the new tb_tc_cmp parameter correctly.] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-09accel/tcg: Hoist tcg_tb_insert() up above tb_link_page()Liren Wei1-1/+8
TranslationBlocks not inserted into the corresponding region tree shall be regarded as partially initialized objects, and needs to be finalized first before inserting into QHT. Signed-off-by: Liren Wei <lrwei@bupt.edu.cn> Message-Id: <f9fc263f71e11b6308d8c1fbc0dd366bf4aeb532.1625404483.git.lrwei@bupt.edu.cn> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-09monitor/tcg: move tcg hmp commands to accel/tcg, register them dynamicallyGerd Hoffmann2-0/+30
One more little step towards modular tcg ... Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Jose R. Ziviani <jziviani@suse.de> Message-Id: <20210624103836.2382472-35-kraxel@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-09accel: build tcg modularGerd Hoffmann1-1/+4
Build tcg accel ops as module. Which is only a small fraction of tcg. Also only x86 for now. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jose R. Ziviani <jziviani@suse.de> Message-Id: <20210624103836.2382472-30-kraxel@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-09accel: add tcg module annotationsGerd Hoffmann2-0/+2
Add module annotations for tcg so autoloading works. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jose R. Ziviani <jziviani@suse.de> Message-Id: <20210624103836.2382472-29-kraxel@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-09accel: build qtest modularGerd Hoffmann1-6/+2
Allow building accelerators as module. Start with qtest as first user. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jose R. Ziviani <jziviani@suse.de> Message-Id: <20210624103836.2382472-28-kraxel@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-09accel: add qtest module annotationsGerd Hoffmann1-0/+2
Add module annotations for qtest so autoloading works. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jose R. Ziviani <jziviani@suse.de> Message-Id: <20210624103836.2382472-27-kraxel@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-09accel: autoload modulesGerd Hoffmann2-2/+2
Call module_object_class_by_name() instead of object_class_by_name() for objects possibly implemented as module Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jose R. Ziviani <jziviani@suse.de> Message-Id: <20210624103836.2382472-26-kraxel@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2024-11-18 11:34:04 +0000