aboutsummaryrefslogtreecommitdiff
path: root/accel
AgeCommit message (Collapse)AuthorFilesLines
2020-02-28accel/tcg: increase default code gen buffer size for 64 bitAlex Bennée1-9/+26
While 32mb is certainly usable a full system boot ends up flushing the codegen buffer nearly 100 times. Increase the default on 64 bit hosts to take advantage of all that spare memory. After this change I can boot my tests system without any TB flushes. As we usually run more CONFIG_USER binaries at a time in typical usage we aren't quite as profligate for user-mode code generation usage. We also bring the static code gen defies to the same place to keep all the reasoning in the comments together. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-Id: <20200228192415.19867-5-alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-02-28accel/tcg: only USE_STATIC_CODE_GEN_BUFFER on 32 bit hostsAlex Bennée1-5/+6
There is no particular reason to use a static codegen buffer on 64 bit hosts as we have address space to burn. Allow the common CONFIG_USER case to use the mmap'ed buffers like SoftMMU. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-Id: <20200228192415.19867-4-alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-02-28accel/tcg: remove link between guest ram and TCG cache sizeAlex Bennée1-8/+0
Basing the TB cache size on the ram_size was always a little heuristic and was broken by a1b18df9a4 which caused ram_size not to be fully realised at the time we initialise the TCG translation cache. The current DEFAULT_CODE_GEN_BUFFER_SIZE may still be a little small but follow-up patches will address that. Fixes: a1b18df9a4 Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-Id: <20200228192415.19867-3-alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-02-28accel/tcg: use units.h for defining code gen buffer sizesAlex Bennée1-9/+10
It's easier to read. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200228192415.19867-2-alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-02-28accel/tcg: fix race in cpu_exec_step_atomic (bug 1863025)Alex Bennée1-10/+11
The bug describes a race whereby cpu_exec_step_atomic can acquire a TB which is invalidated by a tb_flush before we execute it. This doesn't affect the other cpu_exec modes as a tb_flush by it's nature can only occur on a quiescent system. The race was described as: B2. tcg_cpu_exec => cpu_exec => tb_find => tb_gen_code B3. tcg_tb_alloc obtains a new TB C3. TB obtained with tb_lookup__cpu_state or tb_gen_code (same TB as B2) A3. start_exclusive critical section entered A4. do_tb_flush is called, TB memory freed/re-allocated A5. end_exclusive exits critical section B2. tcg_cpu_exec => cpu_exec => tb_find => tb_gen_code B3. tcg_tb_alloc reallocates TB from B2 C4. start_exclusive critical section entered C5. cpu_tb_exec executes the TB code that was free in A4 The simplest fix is to widen the exclusive period to include the TB lookup. As a result we can drop the complication of checking we are in the exclusive region before we end it. Cc: Yifan <me@yifanlu.com> Buglink: https://bugs.launchpad.net/qemu/+bug/1863025 Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20200214144952.15502-1-alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-02-25Merge branch 'exec_rw_const_v4' of https://github.com/philmd/qemu into HEADPaolo Bonzini1-3/+3
2020-02-25accel/kvm: Check ioctl(KVM_SET_USER_MEMORY_REGION) return valuePhilippe Mathieu-Daudé1-1/+11
kvm_vm_ioctl() can fail, check its return value, and log an error when it failed. This fixes Coverity CID 1412229: Unchecked return value (CHECKED_RETURN) check_return: Calling kvm_vm_ioctl without checking return value Reported-by: Coverity (CID 1412229) Fixes: 235e8982ad3 ("support using KVM_MEM_READONLY flag for regions") Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-Id: <20200221163336.2362-1-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-20Avoid address_space_rw() with a constant is_write argumentPeter Maydell1-3/+3
The address_space_rw() function allows either reads or writes depending on the is_write argument passed to it; this is useful when the direction of the access is determined programmatically (as for instance when handling the KVM_EXIT_MMIO exit reason). Under the hood it just calls either address_space_write() or address_space_read_full(). We also use it a lot with a constant is_write argument, though, which has two issues: * when reading "address_space_rw(..., 1)" this is less immediately clear to the reader as being a write than "address_space_write(...)" * calling address_space_rw() bypasses the optimization in address_space_read() that fast-paths reads of a fixed length This commit was produced with the included Coccinelle script scripts/coccinelle/exec_rw_const.cocci. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20200218112457.22712-1-peter.maydell@linaro.org> [PMD: Update macvm_set_cr0() reported by Laurent Vivier] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-01-27Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell3-6/+11
* Register qdev properties as class properties (Marc-André) * Cleanups (Philippe) * virtio-scsi fix (Pan Nengyuan) * Tweak Skylake-v3 model id (Kashyap) * x86 UCODE_REV support and nested live migration fix (myself) * Advisory mode for pvpanic (Zhenwei) # gpg: Signature made Fri 24 Jan 2020 20:16:23 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (58 commits) build-sys: clean up flags included in the linker command line target/i386: Add the 'model-id' for Skylake -v3 CPU models qdev: use object_property_help() qapi/qmp: add ObjectPropertyInfo.default-value qom: introduce object_property_help() qom: simplify qmp_device_list_properties() vl: print default value in object help qdev: register properties as class properties qdev: move instance properties to class properties qdev: rename DeviceClass.props qdev: set properties with device_class_set_props() object: return self in object_ref() object: release all props object: add object_class_property_add_link() object: express const link with link property object: add direct link flag object: rename link "child" to "target" object: check strong flag with & object: do not free class properties object: add object_property_set_default ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-24accel/tcg: Sanitize include pathPhilippe Mathieu-Daudé1-3/+3
Commit af0440ae852 moved the qemu_tcg_configure() function, but introduced extraneous 'include/' in the includes path. As it is not necessary, remove it. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200121110349.25842-11-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-24accel: Replace current_machine->accelerator by current_accel() wrapperPhilippe Mathieu-Daudé2-3/+3
We actually want to access the accelerator, not the machine, so use the current_accel() wrapper instead. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200121110349.25842-10-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-24accel: Introduce the current_accel() wrapperPhilippe Mathieu-Daudé1-0/+5
The accel/ code only accesses the MachineState::accel field. As we simply want to access the accelerator, not the machine, add a current_accel() wrapper. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200121110349.25842-9-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-21cputlb: Hoist timestamp outside of loops over tlbsRichard Henderson1-6/+8
Do not call get_clock_realtime() in tlb_mmu_resize_locked, but hoist outside of any loop over a set of tlbs. This is only two (indirect) callers, tlb_flush_by_mmuidx_async_work and tlb_flush_page_locked, so not onerous. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-21cputlb: Initialize tlbs as flushedRichard Henderson1-2/+3
There's little point in leaving these data structures half initialized, and relying on a flush to be done during reset. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-21cputlb: Partially merge tlb_dyn_init into tlb_initRichard Henderson1-17/+16
Merge into the only caller, but at the same time split out tlb_mmu_init to initialize a single tlb entry. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-21cputlb: Split out tlb_mmu_flush_lockedRichard Henderson1-5/+10
We will want to be able to flush a tlb without resizing. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-21cputlb: Hoist tlb portions in tlb_flush_one_mmuidx_lockedRichard Henderson1-9/+10
No functional change, but the smaller expressions make the code easier to read. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-21cputlb: Hoist tlb portions in tlb_mmu_resize_lockedRichard Henderson1-18/+17
No functional change, but the smaller expressions make the code easier to read. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-21cputlb: Pass CPUTLBDescFast to tlb_n_entries and sizeof_tlbRichard Henderson1-7/+8
We do not need the entire CPUArchState to compute these values. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-21cputlb: Make tlb_n_entries private to cputlb.cRichard Henderson1-0/+5
There are no users of this function outside cputlb.c, and its interface will change in the next patch. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-21cputlb: Merge tlb_table_flush_by_mmuidx into tlb_flush_one_mmuidx_lockedRichard Henderson1-12/+7
There is only one caller for tlb_table_flush_by_mmuidx. Place the result at the earlier line number, due to an expected user in the near future. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-21cputlb: Handle NB_MMU_MODES > TARGET_PAGE_BITS_MINRichard Henderson1-35/+132
In target/arm we will shortly have "too many" mmu_idx. The current minimum barrier is caused by the way in which tlb_flush_page_by_mmuidx is coded. We can remove this limitation by allocating memory for consumption by the worker. Let us assume that this is the unlikely case, as will be the case for the majority of targets which have so far satisfied the BUILD_BUG_ON, and only allocate memory when necessary. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-15tcg: Search includes from the project root source directoryPhilippe Mathieu-Daudé5-5/+5
We currently search both the root and the tcg/ directories for tcg files: $ git grep '#include "tcg/' | wc -l 28 $ git grep '#include "tcg[^/]' | wc -l 94 To simplify the preprocessor search path, unify by expliciting the tcg/ directory. Patch created mechanically by running: $ for x in \ tcg.h tcg-mo.h tcg-op.h tcg-opc.h \ tcg-op-gvec.h tcg-gvec-desc.h; do \ sed -i "s,#include \"$x\",#include \"tcg/$x\"," \ $(git grep -l "#include \"$x\""); \ done Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc parts) Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200101112303.20724-2-philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-15cputlb: Expand cpu_ldst_template.h in cputlb.cRichard Henderson1-1/+106
Reduce the amount of preprocessor obfuscation by expanding the text of each of the functions generated. The result is only slightly smaller than the original. Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-15cputlb: Expand cpu_ldst_useronly_template.h in user-exec.cRichard Henderson1-0/+236
With the tracing hooks, the inline functions are no longer so simple. Reduce the amount of preprocessor obfuscation by expanding the text of each of the functions generated. Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-15cputlb: Rename helper_ret_ld*_cmmu to cpu_ld*_codeRichard Henderson1-71/+23
There are no uses of the *_cmmu names other than the bare wrapping within the *_code inlines. Therefore rename the functions so we can drop the inlines. Use abi_ptr instead of target_ulong in preparation for user-only; the two types are identical for softmmu. Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-15cputlb: Move body of cpu_ldst_template.h out of lineRichard Henderson1-0/+116
With the tracing hooks, the inline functions are no longer so simple. Once out-of-line, the current tlb_entry lookup is redundant with the one in the main load/store_helper. This also begins the introduction of a new target facing interface, with suffix *_mmuidx_ra. This is not yet official because the interface is not done for user-only. Use abi_ptr instead of target_ulong in preparation for user-only; the two types are identical for softmmu. What remains in cpu_ldst_template.h are the expansions for _code, _data, and MMU_MODE<N>_SUFFIX. Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-15accel/tcg: Include tcg.h in tcg-runtime.cRichard Henderson1-0/+1
Code movement in an upcoming patch will show that this file was implicitly depending on tcg.h being included indirectly. Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-15trace: Remove trace_mem_build_info_no_se_[bl]eRichard Henderson1-43/+24
It is easy for the atomic helpers to use trace_mem_build_info directly, without resorting to symbol pasting. For this usage, we cannot use trace_mem_get_info, because the MemOp does not support 16-byte accesses. Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-07accel/kvm: Make "kernel_irqchip" default onXiaoyao Li1-6/+13
Commit 11bc4a13d1f4 ("kvm: convert "-machine kernel_irqchip" to an accelerator property") moves kernel_irqchip property from "-machine" to "-accel kvm", but it forgets to set the default value of kernel_irqchip_allowed and kernel_irqchip_split. Also cleaning up the three useless members (kernel_irqchip_allowed, kernel_irqchip_required, kernel_irqchip_split) in struct MachineState. Fixes: 11bc4a13d1f4 ("kvm: convert "-machine kernel_irqchip" to an accelerator property") Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com> Message-Id: <20191228104326.21732-1-xiaoyao.li@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-20Merge remote-tracking branch ↵Peter Maydell3-6/+6
'remotes/stsquad/tags/pull-tesing-and-misc-191219-1' into staging Various testing and logging updates - test tci with Travis - enable multiarch testing in Travis - default to out-of-tree builds - make changing logfile safe via RCU - remove redundant tests - remove gtester test from docker - convert DEBUG_MMAP to tracepoints - remove hand rolled glob function - trigger tcg re-configure when needed # gpg: Signature made Thu 19 Dec 2019 08:24:08 GMT # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * remotes/stsquad/tags/pull-tesing-and-misc-191219-1: (25 commits) tests/tcg: ensure we re-configure if configure.sh is updated trace: replace hand-crafted pattern_glob with g_pattern_match_simple linux-user: convert target_munmap debug to a tracepoint linux-user: log page table changes under -d page linux-user: add target_mmap_complete tracepoint linux-user: convert target_mmap debug to tracepoint linux-user: convert target_mprotect debug to tracepoint travis.yml: Remove the redundant clang-with-MAIN_SOFTMMU_TARGETS entry docker: gtester is no longer used Added tests for close and change of logfile. Add use of RCU for qemu_logfile. qemu_log_lock/unlock now preserves the qemu_logfile handle. Add a mutex to guarantee single writer to qemu_logfile handle. Cleaned up flow of code in qemu_set_log(), to simplify and clarify. Fix double free issue in qemu_set_log_filename(). ci: build out-of-tree travis.yml: Enable builds on arm64, ppc64le and s390x tests/test-util-filemonitor: Skip test on non-x86 Travis containers tests/hd-geo-test: Skip test when images can not be created iotests: Skip test 079 if it is not possible to create large files ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-18qemu_log_lock/unlock now preserves the qemu_logfile handle.Robert Foley3-6/+6
qemu_log_lock() now returns a handle and qemu_log_unlock() receives a handle to unlock. This allows for changing the handle during logging and ensures the lock() and unlock() are for the same file. Also in target/tilegx/translate.c removed the qemu_log_lock()/unlock() calls (and the log("\n")), since the translator can longjmp out of the loop if it attempts to translate an instruction in an inaccessible page. Signed-off-by: Robert Foley <robert.foley@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20191118211528.3221-5-robert.foley@linaro.org>
2019-12-17kvm: convert "-machine kernel_irqchip" to an accelerator propertyPaolo Bonzini1-5/+54
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17kvm: introduce kvm_kernel_irqchip_* functionsPaolo Bonzini1-4/+19
The KVMState struct is opaque, so provide accessors for the fields that will be moved from current_machine to the accelerator. For now they just forward to the machine object, but this will change. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17kvm: convert "-machine kvm_shadow_mem" to an accelerator propertyPaolo Bonzini1-0/+43
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17tcg: add "-accel tcg,tb-size" and deprecate "-tb-size"Paolo Bonzini1-3/+37
-tb-size fits nicely in the new framework for accelerator-specific options. It is a very niche option, so insta-deprecate it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17tcg: convert "-accel threads" to a QOM propertyPaolo Bonzini1-14/+38
Replace the ad-hoc qemu_tcg_configure with generic code invoking QOM property getters and setters. More properties (and thus more valid -accel suboptions) will be added in the next patches, which will move accelerator-related "-machine" options to accelerators. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17accel: pass object to accel_init_machinePaolo Bonzini1-2/+2
We will have to set QOM properties before accel_init_machine, based on the options provided to -accel. Construct the object outside it so that it will be possible to iterate on properties between object_new_with_class and accel_init_machine. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17qom: add object_new_with_classPaolo Bonzini1-3/+1
Similar to CPU and machine classes, "-accel" class names are mangled, so we have to first get a class via accel_find and then instantiate it. Provide a new function to instantiate a class without going through object_class_get_name, and use it for CPUs and machines already. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17accel: compile accel/accel.c just oncePaolo Bonzini1-1/+1
Now that accel/accel.c does not use CONFIG_TCG or CONFIG_KVM anymore, it need not be compiled once for every softmmu target. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17vl: merge -accel processing into configure_acceleratorsPaolo Bonzini1-67/+2
The next step is to move the parsing of "-machine accel=..." into vl.c, unifying it with the configure_accelerators() function that has just been introduced. This way, we will be able to desugar it into multiple "-accel" options, without polluting accel/accel.c. The CONFIG_TCG and CONFIG_KVM symbols are not available in vl.c, but we can use accel_find instead to find their value at runtime. Once we know that the binary has one of TCG or KVM, the default accelerator can be expressed simply as "tcg:kvm", because TCG never fails to initialize. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17tcg: move qemu_tcg_configure to accel/tcg/tcg-all.cPaolo Bonzini1-0/+83
Move everything related to mttcg_enabled in accel/tcg/tcg-all.c, which will make even more sense when "thread" becomes a QOM property. For now, initializing mttcg_enabled in the instance_init function prepares for the next patch, which will only invoke qemu_tcg_configure when the command line includes a -accel option. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17kvm: Reallocate dirty_bmap when we change a slotDr. David Alan Gilbert1-15/+29
kvm_set_phys_mem can be called to reallocate a slot by something the guest does (e.g. writing to PAM and other chipset registers). This can happen in the middle of a migration, and if we're unlucky it can now happen between the split 'sync' and 'clear'; the clear asserts if there's no bmap to clear. Recreate the bmap whenever we change the slot, keeping the clear path happy. Typically this is triggered by the guest rebooting during a migrate. Corresponds to: https://bugzilla.redhat.com/show_bug.cgi?id=1772774 https://bugzilla.redhat.com/show_bug.cgi?id=1771032 Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2019-11-26kvm: Introduce KVM irqchip change notifierDavid Gibson2-0/+30
Awareness of an in kernel irqchip is usually local to the machine and its top-level interrupt controller. However, in a few cases other things need to know about it. In particular vfio devices need this in order to accelerate interrupt delivery. If interrupt routing is changed, such devices may need to readjust their connection to the KVM irqchip. pci_bus_fire_intx_routing_notifier() exists to do just this. However, for the pseries machine type we have a situation where the routing remains constant but the top-level irq chip itself is changed. This occurs because of PAPR feature negotiation which allows the guest to decide between the older XICS and newer XIVE irq chip models (both of which are paravirtualized). To allow devices like vfio to adjust to this change, introduce a new notifier for the purpose kvm_irqchip_change_notify(). Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Acked-by: Alex Williamson <alex.williamson@redhat.com>
2019-11-11Remove unassigned_access CPU hookPeter Maydell1-2/+0
All targets have now migrated away from the old unassigned_access hook to the new do_transaction_failed hook. This means we can remove the core-code infrastructure for that hook and the code that calls it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20191108173732.11816-1-peter.maydell@linaro.org
2019-10-30Merge remote-tracking branch ↵Peter Maydell11-44/+1149
'remotes/stsquad/tags/pull-tcg-plugins-281019-4' into staging TCG Plugins initial implementation - use --enable-plugins @ configure - low impact introspection (-plugin empty.so to measure overhead) - plugins cannot alter guest state - example plugins included in source tree (tests/plugins) - -d plugin to enable plugin output in logs - check-tcg runs extra tests when plugins enabled - documentation in docs/devel/plugins.rst # gpg: Signature made Mon 28 Oct 2019 15:13:23 GMT # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * remotes/stsquad/tags/pull-tcg-plugins-281019-4: (57 commits) travis.yml: enable linux-gcc-debug-tcg cache MAINTAINERS: add me for the TCG plugins code scripts/checkpatch.pl: don't complain about (foo, /* empty */) .travis.yml: add --enable-plugins tests include/exec: wrap cpu_ldst.h in CONFIG_TCG accel/stubs: reduce headers from tcg-stub tests/plugin: add hotpages to analyse memory access patterns tests/plugin: add instruction execution breakdown tests/plugin: add a hotblocks plugin tests/tcg: enable plugin testing tests/tcg: drop test-i386-fprem from TESTS when not SLOW tests/tcg: move "virtual" tests to EXTRA_TESTS tests/tcg: set QEMU_OPTS for all cris runs tests/tcg/Makefile.target: fix path to config-host.mak tests/plugin: add sample plugins linux-user: support -plugin option vl: support -plugin option plugin: add qemu_plugin_outs helper plugin: add qemu_plugin_insn_disas helper plugin: expand the plugin_init function to include an info block ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-29Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20191028' into stagingPeter Maydell2-22/+25
Improvements for TARGET_PAGE_BITS_VARY Fix for TCI ld16u_i64. Fix for segv on icount execute from i/o memory. Two misc cleanups. # gpg: Signature made Mon 28 Oct 2019 14:55:08 GMT # gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F # gpg: issuer "richard.henderson@linaro.org" # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full] # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth/tags/pull-tcg-20191028: translate-all: Remove tb_alloc translate-all: fix uninitialized tb->orig_tb cputlb: Fix tlb_vaddr_to_host exec: Cache TARGET_PAGE_MASK for TARGET_PAGE_BITS_VARY exec: Promote TARGET_PAGE_MASK to target_long exec: Restrict TARGET_PAGE_BITS_VARY assert to CONFIG_DEBUG_TCG exec: Use const alias for TARGET_PAGE_BITS_VARY configure: Detect compiler support for __attribute__((alias)) exec: Split out variable page size support to exec-vary.c cpu: use ROUND_UP() to define xxx_PAGE_ALIGN cputlb: ensure _cmmu helper functions follow the naming standard tci: Add implementation for INDEX_op_ld16u_i64 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-28accel/stubs: reduce headers from tcg-stubAlex Bennée1-1/+0
We don't need much for these. However I do wonder why these aren't just null inlines in exec-all.h Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-10-28translator: inject instrumentation from pluginsEmilio G. Cota1-0/+20
Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-10-28cputlb: ensure _cmmu helper functions follow the naming standardAlex Bennée1-3/+21
We document this in docs/devel/load-stores.rst so lets follow it. The 32 bit and 64 bit access functions have historically not included the sign so we leave those as is. We also introduce some signed helpers which are used for loading immediate values in the translator. Fixes: 282dffc8 Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20191021150910.23216-1-alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
generated by cgit v1.1 at 2024-12-27 20:19:26 +0000